How to change mouse position

i wan to change my mouse coordinate
to x->0, y ->0, possible?

The only way to do it is to move the mouse to those coordinates. mouseX/mouseY are read-only properties.

Similar Messages

How to change the position of a window created in the script?

Hello to all
A window called from another window are the same size. How can change the position of the window relative to the caller call window?

That is worked, but for abs.coord. How make releative coord.?
When I include that in my script, window show without elements ! See attachments №2

How to change the position of a menu?

Hello,
I'm a new dreamweaver developer so I would like to ask you
few questions.
If I have a sprite menu that is positioned by default in the
left border of the page, how can I change it's position inside the
page?With css?How?
I'd have to put inside my page also a logo image but, just as
menu, I am unable to put it in the right part of the page; so I was
wondering how to change its position too.
Thank you,
Kind Regards, Luke14free

You would change its position by changing the position of its
container. We
would need to see your page and its code to know how to do
that.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"luke14free" <[email protected]> wrote in
message
news:f2pntm$lf1$[email protected]..
> Hello,
> I'm a new dreamweaver developer so I would like to ask
you few questions.
> If I have a spry menu that is positioned by default in
the left border of
> the
> page, how can I change it's position inside the
page?With css?How?
> I'd have to put inside my page also a logo image but,
just as menu, I am
> unable to put it in the right part of the page; so I was
wondering how to
> change its position too.
> Thank you,
> Kind Regards, Luke14free
>

How to Change the position of Column in ALV report

Hi Follks,
    Is is possible to change the position of column in ALV report?.If yes then how?
    Basically my requirement is, that user want afacility where , he should be able to change the position
    of column aftre he runs the report.
    Eg: After running the report , user felt that column 5 should be at position 2 , in that case he should
           be able to drag column 5 at position 2 and vice versa.
    Please help me, how to solve this issue.
    Note : I am using NW 7.0 SP 9
    Regards
    PG
Edited by: PG on Apr 13, 2009 11:10 AM

HI PG,
do below whie filling the filed catlog
wa_fieldcat-fieldname        = 'Field1".
wa_fieldcat-COL_POS = '1',
append wa_fieldcat to it_fieldcat.
wa_fieldcat-fieldname         = 'Field2".
wa_fieldcat-COL_POS = '2',
wa_fieldcat-fieldname         = 'Field3".
wa_fieldcat-COL_POS = '3',
Thanks!

How to Change the position of Roles

Dear Experts,
I have a requirement in which I have to change the position of the roles.
How to achieve it, Please Suggest.
Warm Regards,
Upendra Agrawal

HI Upendra,
Follow the below process to re-arrange the roles as per your requirement:
1. From the Portal Catalog, right-click a role or workset and choose Open ® Object. The role or workset is loaded into the appropriate editor.
       2.      In the displayed editor, select either:
   The root node of the role or workset hierarchy
A workset or folder within the role or workset hierarchy
A folder within a workset of the role or workset hierarchy
       3.      In the Role/Workset Editor, click Properties to display in the Property Editor the properties of the object that you selected.
       4.      From the Property Category dropdown list, choose Navigation.
       5.      In the property list, scroll to the Sort Priority property and enter a numeric value.
       6.      Click Save.
In the same way, assign values to all of the navigation nodes that you want at specific locations in the portal navigation hierarchy.
Hope it helps.
Regards,
Gourav.

OVS - how to change the position of the fields in the OVS search criteria

Hi,
I have an OVS search screen where 4 search criterias are there.Based on the search criteria , the values will be papulated in the OVS screen.
Now I have to change the position of the fields in the search criteria.Means if the Maximum field (one of the search criteria) is in the first position,I need to put it in the last position.I have ro change the position of the search criteria field and not the result fields.
Please suggest me how to do that.
Regards
-Sandip

Hi Sandeep,
please go through this article for customizing Value Help:
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0c6132f-4ea3-2b10-4d8f-e68d2e96113d]
Thanks and Regards

Change mouse position

Hello
I´d like to know if it´s possible to change the position of the mouse pointer.
I mean that with two numerical controls (x,y) you can change the
position of the mouse pointer without moving the mouse, of course.
Thank you.

You can find a sample VI in this thread.
Ah, the power of searching.

How to change the position of a rectangle dynamically

Hi,
I am designing a form, where the position of a rectangle has to be changed dynamically. I'm trying with Set_Item_Property(Position property). But I'm unable to change the position. I need some information regarding this graphics object. Normally, we attach block name with the items. Then for these graphics object, what will be attached. I'm using Forms 6i version.
Regards,
Alok Dubey

you can use a stacked canvas with the rectangle in it. Then you can change the position of the canvas at runtime. Problem is, that the canvas overlaps objects...

How to change the position of label of an item to be in the rigth side?

Hi ,
I want to change the position of the label of an item (displayed as text field) to be in the rigth side of the text field of the item instead on the left side of the text field of the item?
Thanks in advance
Yoel

Hello Yoel,
>> I want to change the position of the label of an item (displayed as text field) to be in the rigth side of the text field of the item instead on the left
Are you talking about a single item among others, which will be left at the left side, or are you talking about the entire page (Right-To-Left page orientation)?
I’m afraid Leo suggestion will not help you either way. The “Horizontal / Vertical Alignment” field, in the label section of the item, pertains to the alignment within the ‘TD’ cell of the item’s label, which by default is located to the left of the item. Within this cell, you can choose several alignment options, including right and left.
Regards,
Arie.

How to change mouse pointers programmatically

Normally when a VI is run, mouse pointer changes to 'Hand Pointer'.Is it possible to make it 'Arrow pointer' wherever no buttons are there and if buttons are there change mouse to 'Hand Pointer'.
Thanks

Hi,
if you use LV 7 have a look at the cursors palette under application control (I don't know the exact English names because I'm using the German version; it may be an advanced feature which is not available in all LV versions).
Together with a dynamic event you could implement your desired behaviour maybe (it's a good idea though; the hand pointer is pretty ugly as standard mouse pointer if there's no interactive element).
Cheers,
Carsten

SBZ - how to change sound "position"

Hello, i've just switched to a SBZ from an X-Fi Fatality Gamer blabla.
I've been using XFI changer for the last years and now thanks to Applejack i have something similar to use with my new SBZ, SBZ switcher.
I just miss one little thing from creative: i need to change the position of the sound to the back speakers when i watch movie like i used to do with my X-Fi.
Here you are a pics of what i mean by change sound position..
Immagine.jpg
It's possible someway to do that with a SBZ??
Thank You,
pakko

Firefox will use the default audio of the computer you are running this from.
If you are having further issues with this, the following article will help troubleshoot.
[[Fix common audio and video issues]]

How to change mouse type?

I''ve a wheel mouse, but archlinux seems recognize it as a normal mouse. how can i change it? thanks

scottro wrote:
The obvious question. Did you add the line
Option "ZAxisMapping" "4 5"
to /etc/X11/XF86Config?
I've add the line in XF86Config file but the wheel still doesn't work, (i can use it as middle key).
In XF86Config,
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection

How to change mouse pointers?

I would like to change the mouse pointer (from arrow to hourglass) while the application is doing a certain task.
How is this done? thanks!

in the frame where you want to do this just write
setCursor(3) // it is deprecated3 means waitcursor, for more spec. look in
java.awt.Cursorregards

How to change mouse-over label for a mx:CandleStickChart?

I have an <mx:CandleStickChart .../> graph and want to change the default
labels on the mouse-over window. For example by default, the mouse-over window displays:
line1: some label
line2: open: #1
line3: close: #2
line4: high: #3
line5: low: #4
I want to change the words "open", "close", "high", "low" to something else. I optionally want to not show the "close" line.
Do you have any suggestions on how to do this? If you do, please provide a short example.
Thanks for taking the time to help.

Hi
First change the name from kPlusIconPNGIconRsrcID to kPlusIconPNGIconIRsrcID
so "I" will indicate that your icon is inactive
Create another resource id like:
#define kPlusIconPNGIconIRsrcID 15
#define kPlusIconPNGIconARsrcID 15
Define paths to the icons
resource PNGA(kPlusIconPNGIconIRsrcID) "../res/icons/PLUS_ICO_23_I.png" // Inactive icon
resource PNGR(kPlusIconPNGIconARsrcID) "../res/icons/PLUS_ICO_23_A.png" // Active icon
Regards
Bartek

How to change the position of Views in IC webclient

Dear all,
Our requirement is to change the Views locations in IC Webclient Interface. like we want to see morefields view (BuAgmoreFieldViewset) in the place of Product Veiw in Identify accout work area.
In the same way in Interaction record we want to replace follow-up activity view has to be replaced with Interaction record partners view.
Kindly suggest me what sort of development is required for this requirement. How can we configure this in SAP?
Your valuable suggestions will be highly appreciated.
Best regards,
R. Sravanthi
Edited by: Sravanthi_Revella on Apr 19, 2009 2:46 PM
Edited by: Sravanthi_Revella on Apr 19, 2009 2:47 PM

There is no easy way or direct configuration to handle this . You need a complete knowledge of all concepts in IC WebClient Cookbook , essentially View , Viewset and how to make modification in standard viewset . Once that is done you will have to Handle the Navigation using the Navigation Link concept . Apart from that you will need BSP/ Object Oriented ABAP to handle the Object Node Instantiation either in the Inbound Plug etc so that your View Context Node and Attributes are populated to be display .

How to change mouse position

Similar Messages

Maybe you are looking for