How to change the position of label of an item to be in the rigth side?

Hi ,
I want to change the position of the label of an item (displayed as text field) to be in the rigth side of the text field of the item instead on the left side of the text field of the item?
Thanks in advance
Yoel

Hello Yoel,
>> I want to change the position of the label of an item (displayed as text field) to be in the rigth side of the text field of the item instead on the left
Are you talking about a single item among others, which will be left at the left side, or are you talking about the entire page (Right-To-Left page orientation)?
I’m afraid Leo suggestion will not help you either way. The “Horizontal / Vertical Alignment” field, in the label section of the item, pertains to the alignment within the ‘TD’ cell of the item’s label, which by default is located to the left of the item. Within this cell, you can choose several alignment options, including right and left.
Regards,
Arie.

Similar Messages

How do you change the position of email sender so that it's on the left (sender[from], subject and date received)

How do you change the position of email sender so that it's on the left (sender[from], subject and date received)

In the Thread Pane where your messages are listed?
You see that bar with the labels "From", "Subject", "Date" and so on? Well, they are buttons. You can click on them to sort your messages. You can also drag them with the mouse left and right to reposition them, and you can drag their ends to change the column widths.
These are standard computer actions; you can do all of this in Windows Explorer ("My Computer") too.
In Thunderbird, a right-click on any of these buttons will reveal a pop-up menu where you can select and deselect the columns to control what is shown.
More here: http://www.ramsden.org.uk/8_How_to_sort.html

I was installing the new EFI software update on my macbook pro and I became stuck on the grey screen with the window that said "installing 2 items", its been on the same screen for 2 1/2 hours. does anyone know what I can do?

As the title says.
I was installing the new EFI software update on my macbook pro and I became stuck on the grey screen with the window that said "installing 2 items", its been on the same screen for 2 1/2 hours. does anyone know what I can do?
I don't want to restart it because im scared that something might go wrong.
operating lion

LimitLess- wrote:
Hi,
I had the power supply connected when I attempted it previously but even so my problem occurred. My rom is different and so I still need to update it.
Thanks
I wanted to mark your answer helpful too but I didn't know that I could only put it for 2 answers. Sorry
That was good advice by G-N and s/he is correct about it. Unfortunately, ASC allows only 2 "helpful" and 1 "correct" marks per thread.

How to change color of selected label from list of labels?

My Problem is that I have a list of labels. RowHeaderRenderer is a row header renderer for Jtable which is rendering list items and (labels).getListTableHeader() is a method to get the list. When we click on the label this code is executed:
getListTableHeader().addMouseListener(new MouseAdapter()
public void mouseReleased(MouseEvent e)
if (e.getClickCount() >= 1)
int index = getListTableHeader().locationToIndex(e.getPoint());
try
if (((ae_AlertEventInfo)theAlerts.values().toArray()[index]).ackRequiredFlag)
AcknowledgeEvent ackEvent = new AcknowledgeEvent(
this, (ae_AlertEventInfo)theAlerts.values().toArray()[index]);
fireAcknowledgeEvent(ackEvent);
((HeaderListModel)listModel).setElementAt(ACK, index);
catch(Exception ex) {;}
Upon mouse click color of the label should be changed. For some period of time ie. Upto completion of fireAcknowledgeEvent(ackEvent);
This statement is calling this method:
public void handleAcknowledgeEvent(final AcknowledgeEvent event)
boolean ackOk = false;
int seqId = ((ae_AlertEventInfo)event.getAlertInfo()).sequenceId;
if (((ae_AlertEventInfo)event.getAlertInfo()).ackRequiredFlag)
try
// perform call to inform server about acknowledgement.
ackOk = serviceAdapter.acknowledge(seqId,
theLogicalPosition, theUserName);
catch(AdapterException aex)
Log.error(getClass(), "handleAcknowledgeEvent()",
"Error while calling serviceAdapter.acknowledge()", aex);
ExceptionHandler.handleException(aex);
else
// Acknowledge not required...
ackOk = true;
//theQueue.buttonAcknowledge.setEnabled(false);
final AlertEventQueue myQueue = theQueue;
if (ackOk)
Object popupObj = null;
synchronized (mutex)
if( hasBeenDismissed ) { return; }
// mark alert event as acknowledged (simply reset ack req flag)
ae_AlertEventInfo info;
Iterator i = theAlerts.values().iterator();
while (i.hasNext())
info = (ae_AlertEventInfo) i.next();
if (info.sequenceId == seqId)
// even if ack wasn't required, doesn't hurt to set it
// to false again. But it is important to prevent the
// audible from playing again.
info.ackRequiredFlag = false;
info.alreadyPlayed = true;
// internally uses the vector index so
// process the queue acknowledge update within
// the synchronize block.
final ae_AlertEventInfo myAlertEventInfo = event.getAlertInfo();
SwingUtilities.invokeLater(new Runnable()
public void run()
myQueue.acknowledge(myAlertEventInfo);
myQueue.updateAcknowledgeButtonState();
// here we should stop playing sound
// if it is playing for this alert.
int seqId1;
if (theTonePlayer != null)
seqId1 = theTonePlayer.getSequenceId();
if (seqId1 == seqId)
if (! theTonePlayer.isStopped())
theTonePlayer.stopPlaying();
theTonePlayer = null;
// get reference to popup to be dismissed...
// The dismiss must take place outside of
// the mutex... otherwise threads potentially
// hang (user hits "ok" and is waiting for the
// mutex which is currently held by processing
// for a "move to summary" transition message.
// if the "dismiss" call in the transition
// message were done within the mutex, it might
// hang on the dispose method because the popup
// is waiting for the mutex...
// So call popup.dismiss() outside the mutex
// in all cases.
if(event.getSource() instanceof AlertEventPopup)
popupObj = (AlertEventPopup)event.getSource();
else
popupObj = thePopups.get(event.getAlertInfo());
thePopups.remove(event.getAlertInfo());
SwingUtilities.invokeLater(new Runnable()
public void run()
// search vector elements to determine icon color in main frame
String color = getColor();
fireUpdateEvent(new UpdateEvent(this, blinking, color));
// Call dismiss outside of the mutex.
if (popupObj !=null)
if(popupObj instanceof AlertEventPopup)
((AlertEventPopup)popupObj).setModal(false);
((AlertEventPopup)popupObj).setVisible(false); // xyzzy
((AlertEventPopup)popupObj).dismiss();
else
// update feedback... ack failed
SwingUtilities.invokeLater(new Runnable()
public void run()
myQueue.setInformationMessage("Acknowledge failed to reach server... try again");
return;
Code for RowHeaderRenderer is:
class RowHeaderRenderer extends JLabel implements ListCellRenderer
JTable theTable = null;
ImageIcon image = null;
RowHeaderRenderer(JTable table)
image = new ImageIcon(AlertEventQueue.class.getResource("images" + "/" + "alert.gif"));
theTable = table;
JTableHeader header = table.getTableHeader();
setOpaque(true);
setHorizontalAlignment(LEFT);
setForeground(header.getForeground());
setBackground(header.getBackground());
setFont(header.getFont());
public Component getListCellRendererComponent( JList list, Object value,
int index, boolean isSelected, boolean cellHasFocus)
int level = 0;
try
level = Integer.parseInt(value.toString());
catch(Exception e)
level = 0;
if (((ae_AlertEventInfo)theAlerts.values().toArray()[index]).ackRequiredFlag)
setBorder(UIManager.getBorder("TableHeader.cellBorder"));
this.setHorizontalAlignment(JLabel.CENTER);
this.setVerticalAlignment(JLabel.CENTER);
setIcon(image);
else
setBorder(BorderFactory.createLineBorder(Color.gray));
setText("");
setIcon(null);
return this;
I tried but when i am clicking a particular label, the color of all labels in the List is being changed. So can you please assist me in changing color of only the label that is selected and the color must disappear after completion of Upto completion of fireAcknowledgeEvent(ackEvent);

im a bit confused with the post so hopefully this will help you, if not then let me know.
I think the problem is that in your renderer your saying
setBackground(header.getBackground());which is setting the backgound of the renderer rather than the selected item, please see an example below, I created a very simple program where it adds JLabels to a list and the renderer changes the colour of the selected item, please note the isSelected boolean.
Object "value" is the currentObject its rendering, obviously you may need to test if its a JLabel before casting it but for this example I kept it simple.
populating the list
public void populateList(){
        DefaultListModel model = new DefaultListModel();
        for (int i=0;i<10;i++){
            JLabel newLabel = new JLabel(String.valueOf(i));
            newLabel.setOpaque(true);
            model.addElement(newLabel);
        this.jListExample.setModel(model);
        this.jListExample.setCellRenderer(new RowHeaderRenderer());
    }the renderer
class RowHeaderRenderer extends JLabel implements ListCellRenderer
    JTable theTable = null;
    public Component getListCellRendererComponent(JList list, Object value,
                                                  int index, boolean isSelected, boolean cellHasFocus){
        JLabel aLabel = (JLabel)value;
        if (isSelected){
            aLabel.setBackground(Color.RED);
        }else{
            aLabel.setBackground(Color.GRAY);
        return aLabel;
}

SBZ - how to change sound "position"

Hello, i've just switched to a SBZ from an X-Fi Fatality Gamer blabla.
I've been using XFI changer for the last years and now thanks to Applejack i have something similar to use with my new SBZ, SBZ switcher.
I just miss one little thing from creative: i need to change the position of the sound to the back speakers when i watch movie like i used to do with my X-Fi.
Here you are a pics of what i mean by change sound position..
Immagine.jpg
It's possible someway to do that with a SBZ??
Thank You,
pakko

Firefox will use the default audio of the computer you are running this from.
If you are having further issues with this, the following article will help troubleshoot.
[[Fix common audio and video issues]]

How to change mouse position

i wan to change my mouse coordinate
to x->0, y ->0, possible?

The only way to do it is to move the mouse to those coordinates. mouseX/mouseY are read-only properties.

How to change delivery date in confirmation tab in item overview in PO

Hi,
I am using ME_CONFIRMATION_UPDATE to add delivery date into the confirmation tab in item level.It is adding new line item.
It is even updating the table EKES.
Now my requirement is to change the delivery date from the above PO. Is there any function module for the same.
PLEASE GUIDE ME.
Thanks,
Vengal Rao.

Hi,
Our client is into Apparel business and using SAP-AFS. Some time at the last moment the due to change in customer delivery date there is a requirment to change the delivery date in confirmation tab also..
Thanks,
Vengal Rao.

How to exchange the position for label and element of an item?

I have a form with a lot of checkbox items. I want to place the checkbox before the label, how to achieve that?
Thanks,
Jen

Try this.
Label:
null.
List of values definition:
STATIC:Your Label;Y
Regards,
Max.

How to change image position in PanelStrecthLayout using css?

Hi All,
I am using JDeveloper 11.1.1.6.
My Scenario is I need to show the image front of the Panel Stretch Layout .I tried to set like Style Class and change the Z-index but it's not working ,
My Design Like :
<af:panelStretchLayout id="psl3" inlineStyle="background-color:red" styleClass="ImageStyle">
                      <f:facet name="center">
                        <af:panelStretchLayout id="psl2" topHeight="40px"
                                               inlineStyle="margin:20px;">
                          <f:facet name="center">
                            <af:panelGroupLayout id="pgl3" layout="vertical"
                                                 inlineStyle="background-color: Green">
                              <af:panelGroupLayout layout="vertical" id="pgl4"   inlineStyle="margin-top:10px;margin-left:10px;background-color:Green">
                              </af:panelGroupLayout>
                            </af:panelGroupLayout>
                          </f:facet>
                        </af:panelStretchLayout>
                      </f:facet>
                    </af:panelStretchLayout>
My CSS Codes :
.ImageStyle{
background-image: url("../img/sampleimage150x100.png");
z-index:9999;
background-repeat: no-repeat;
How to show image in-front of the layout not it's hiding behind the layout ...
Thanks..

Hi,
normally you would use skinning to skin the components. I don't think that layers make a different because with the stretch layout there are no overlapping layers. So maybe we should start with the use case you are trying to implement, I am not sure I understand the sentence: "I need to show the image front of the Panel Stretch Layout". What does this mean "in front" ? Do you want it to hide the panel stretch layout ? What is the use case?
Frank

How to change an apple id on an idevice when I cannot access the previous apple id?

Dears,
I am trying to change the apple id on my father's iphone. He has NO idea what the previous password was, OR his email password (that is why I registered him a new email) OR what the recovery email address was. I am trying to delete his icloud account but it demands and apple id password.
Is there anything I else I can do except formatting his phone?
Best Regards,

Go to http://iforgot.apple.com and sign in with your iCloud login. A new password will be sent to his associated email address. If this doesn't work you will have to contact Support. Go tohttps://getsupport.apple.com ; click' See all products and services', then 'More Products and Services, then 'Apple ID', then 'Other Apple ID Topics' then 'Lost or forgotten Apple ID password'.

How do you control the position and size of images, i.e,. photo to the printer?

HP Officejet 8600
Windows XP
I am trying to figure out how to control the positon and size of photos or pics that are included in an email that I send to my printer via HP ePrint.
This question was solved.
View Solution.

Hey Old_Salt,
What model HP printer do you have?
ePrint is a very simple system when it comes to printing, because it doesn't provide as many controls as one may be used to with a computer. Many of the photosmart printers are designed to recognize a photo in ePrint and print the image to the proper photo paper.
Jason
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

How to change font and font size of textarea item

hi -- I have several form pages which for the most part have text items. However, I do
have a few textarea items, and the font and font size of these are defaulting to
something different than the text items.
How can I change the font and font size of the textarea items, preferably in such a
way that it will apply to all textarea items in my app?
(And, to take a step back, where can I find the font and size definitions for these
items? I assume it's in the CSS (??) but don't really know what to look for.)
Thanks,
Carol

>
I do have one last thing I'd like to get resolved, if possible. Both the text and textarea items are
width 100 and height 1, but the textarea is a bit wider and taller than the text item. If possible,
I'd like to get at least the widths to match exactly, for aesthetics. (There was a much larger
discrepancy before the size and fonts matched...) Maybe it's just a characteristic of textareas
that they have that extra bit of width and height... I don't know
>
If you look at the generated HTML source you'll see that the APEX width value ends up in 2 different attributes: size for the text field and cols for the textarea. How each of these is transformed into the dimension used to render the control obviously differs, and how either is used will also differ across browsers and platforms. Where you want control over this the best idea appears to be to ignore the width value (APEX lets you blank this out, but resets it to 30 if the definition is subsequently edited) and explicitly set the width property in CSS, as I've now done on your example using HTML Form Element Attributes. This could also be done in a style sheet using the APEX-generated item IDs (P1_TEXT etc) as selectors.
The APEX height value is only applied to the textarea rows attribute: it has no effect on the text field. Again, how this works will be implementation-specific and is better handled explicity using CSS. (Anyway I'm doubtful about a 1 row high textarea? It doesn't affect the ability to enter more than 1 line of text. Looks confusing.)
cols and rows are required attributes for textareas, so APEX has to generate the attributes, but we're better off specifying width and height in CSS to override the browser's computed rendering.
(This is the first time I've put an app on apex.oracle.com... so hopefully it'll be smooth sailing for you.)Apart from not noticing that the region was cached and wondering why my changes weren't having any effect? Thought I was losing it... ;-)
Edited by: fac586 on Jul 8, 2009 9:14 AM

How do I get a rid of the error message "Insecure Start-Up Items folder detected because the folder does not have the proper security settings?

I recently upgraded my OS from 10.4.11 to 10.6.8, so that I could download iTunes to my new iPhone 5. After upgrading to 10.6.8, I received error message about my Symantec Norton anti-virus security, so I upgraded that to security that's compatible with 10.6.8. Now I receive the error message above, about my Start-Up Items folder. There are currently no items in the folder. How do I get rid of the error message above? Thanks for any help.

Hello,
Resolution:
To prevent the "Insecure Startup Items folder detected" message from appearing
Open Disk Utility from /Applications/Utilities.
Select the name of the volume where Mac OS X is installed (default name is "Macintosh HD").
Click the Repair Disk Permissions button.
After permissions repair is complete, restart Mac OS X and verify that the message no longer appears.
http://support.apple.com/kb/TS3493?viewlocale=en_US

How to change content type from Document set to Item

While creating content type I've selected Item as a parent but after created I can see its showing Document Set as a parent content type. Now can anyone please suggest if possible I can change the parent content type from Document Set to Item.

Hi,
From your description, I know you want to change content type’s parent after creating it.
There is no OOB method to change content type’s parent after you create it. If current content type has not been used, you could delete it and recreate it with your desired base type. Here are similar cases:
http://sharepoint.stackexchange.com/questions/16131/change-base-content-type-of-content-type
https://social.technet.microsoft.com/Forums/sharepoint/en-US/b976f17e-99b5-42bb-bc82-8d4123a625cf/change-the-parent-of-a-content-type.
This article may help you understand the relationship of Content type inheritance:
https://support.office.com/en-au/article/Create-and-edit-content-types-3d5d45af-608d-4183-8d51-073095fe0312#__toc239159103.
Best Regards
Vincent Han
TechNet Community Support

How to change view type "list" to allow dragging items?

I much prefer using "list" over "grid" and "fan" because it's compact and easier to see what's going on. But list doesn't allow you to drag icons off it...
Any way to change this?

If you want to report this issue to Apple's engineering, send a bug report or an enhancement request via its Bug Reporter system. To do this, join the Mac Developer Program—it's free and available for all Mac users and gets you a look at some development software. Since you already have an Apple username/ID, use that. Once a member, go to Apple BugReporter and file your bug report or enhancement request. The nice thing with this procedure is that you get a response and a follow-up number; thus, starting a dialog with engineering.

How to change the position of label of an item to be in the rigth side?

Similar Messages

Maybe you are looking for