How to change pricing procedure of existing purchase Order
Hi,
We have created a Purchase Order.
After PO creation, we have changed the schema group for the vendor.
Now for new Purchase Orders, new pricing procedure is determined.
We also want new pricing procedure to be determined for old Purchase Orders.
Can this be achieved?
Regards,
Hi ,
It is possible to Update the Pricing procedure in Old PO. For this what you need to do is Open PO in ME22N transaction, in the header Org. Data tab remove the Purch. Org and Company Code and press Enter Key for 3 or 4 times now enter the Purch. Org and Company Code now check in the Item Data, condition tab Analysis button new Pricing procedure is picked up. Even we can change the PO Currency in this way if it is changed in Vendor master.
Hope this will help you
Best Regards,
Pradeep Naik
Similar Messages
-
How to change MOT programaticaly in existing Purchase Order
Hello Experts,
Will appreciate your quick reply on the query as given below.
Is MOT ( means of transport) assigned to Purchase order somewhere? .....If yes then...Would like to change MOT ( TTYPE) by selecting one of the existing MOTs in a particular Tlane based on some logic. Have a plan to put this logic in CIF related user exit at APO inbound.
Its multiple MOT in one tlane scenario. But I am not sure if user exit can be used to change MOT related to a purchase order.
Kindly share your opinion on the issue.
Thanks
Best RegardsHi Experst,
MOT si seeen as attached to Purchase Order once we do right click in Planning book to check details. I am trying to understand if its stored in LC only or in DB table and if we can chaneg it programatically .
Thanks -
How to change material component for a Purchase Order?
How to change material component for a Purchase Order?
I need FM .
PLEASE helpDear ,
Create PO with item category L....There in Item detail you will get tab for material.
There click in component Button, it will take you to the component screen there you can assign and deassign components.
Hope this helps.
Regards
Utsav -
How to change & see the PO Status (Purchase Order Status) ?
Hi Everybody,
I have to change the PO Status. For this I am using the Function Module 'BBP_PD_PO_STATUS_CHANGE'. But it is not changing the PO Status. How/Where to see the PO Status?
Please help me out asap.
Thanks & Regrds,
Nagaraju Maddi
Message was edited by: Nagaraju MaddiHi ,
It is possible to Update the Pricing procedure in Old PO. For this what you need to do is Open PO in ME22N transaction, in the header Org. Data tab remove the Purch. Org and Company Code and press Enter Key for 3 or 4 times now enter the Purch. Org and Company Code now check in the Item Data, condition tab Analysis button new Pricing procedure is picked up. Even we can change the PO Currency in this way if it is changed in Vendor master.
Hope this will help you
Best Regards,
Pradeep Naik -
Urgent - How to change Item category for Open Purchase Order
Hi Team,
Lil bit tricky issue.
My client has asked us to change the existing Item Category values, Combinations, Category Set etc. Its been changed and uploaded successfully.
The question here is how we need to handle the category for Open Purchase Order. How to update the same.
Do we need to do manually or any other way ?
Please advice
Regarads,
JohnHi John,
This is reallly a tricky issue!
I guess you cannot change the category of an existing PO's.
This field will be greyed out once we save the form...there were no profiles/other setups to enable this field.
For all new PO's since you have changed the new category value that should not be a issue.
Lets wait for some of our colleuges opinion.
I guess PO cancel should be the final option if we dont hear any new work arounds.
Thanks
-Arif. -
Want to change Pricing Procedure in the sales order
Hello
I have created a sales order. It has RVVVV9 as pricing procedure. Now I recognise that the pricing procedure in the order is wrong due to incorrect CUSTOMER PRICING PROCEDURE in Customer Master data. Now I changed the CUSTOMER PRICING PROCEDURE in Customer Master data to correct one which will give me the correct pricing procedure(RVVVV8) in the sales order. But I can see that the sales order still has old Pricing Procedure even after updating the cust master data with the correct CUST PRICING PROCEDURE.
I have maintained the pricing procedure determination correctly.
would appreciate your quick response.
//VenkatHave you checked "Assign document pricing procedures to order types"?
check also ovkk, there is a combination of sales org, distrubtion chanel, division, document pricing procedure and customer pricing procedure. Make sure you have make the right combination.
Regards,
Gunadi -
Excise duty in the Pricing Procedure for Local Purchase / Importation
Hi,
I'd like to know how to set up the pricing procedure for the purchase of an IS Oil Material; for local purchase and importation, especially with regards to the excise duty posting.
Local purchase: the vendor will bill us inclusive of the ED tax he previously paid, so the tax is just passed on to us.. My receiving location has ED paid status. In the PO item, we need to see this price (inclusive of tax) in the net price field.
Importation: the vendor only bills us the cost of the material. When we received the fuel, we paid ED tax to local tax authorities.
I know that both in these scenarios, the system has to determine the excise duty.
My questions are (1) how do you set up the excise duty condition type in the pricing procedure(or do they have to be maintained in the pricing procedure?) ? and (2) how do you set up this condition type in the config?
Thank you and hoping for your immediate feedback.
zccrHi,
You can use same pricing procedure
put 4 in subtotal in pricing procedure against the Discounr or freight cond
and in taxinn
BASb ALTCBV 362 and for jmop 363
But this will work only if same discount or freight value is in IV as that given in PO
if freing value changes in IV then its a problem
This is SAP bug, and SAP workes in that way only, freight value should be same in PO and IV
other solution
in taxinn create tax code like v8 vat 4% for 003 tax clasification
in ftxp create tax code V8 desc vat 4%
in fv11 for jvrd put 4
and at the time of IV put this tax code for freight amount
and for regular material value V1 tax code
this will work only if u have used acess seq MWST instead of JTAX pr JST1
hope this helps
Vipin -
How to change pricing Conditions in Sales order in change sales order bapi
Hi Experts,
How to change pricing Conditions in Sales order in change sales order bapi.
I have used the 2 function modules bapi-changesalesorder and sd salesdocument change, But it is creating the new record , instead of changing the existing one, Could please assist regarding the same
Thanks in Advance .
NLNHI NLN
I have just tried on my system and managed to overwrite the existing price by passing the following parameters.
<b>Import Paramters:</b>
SALESDOCUMENT - Sales Document Number
ORDER_HEADER_INX - UPDATEFLAG as <b>'U'</b>.
LOGIC_SWITCH - Import Structure - Pass 'X' to LOGIC_SWITCH-COND_HANDL.
<b>Tables:</b>
CONDITIONS_IN - ITM_NUMBER,
COND_COUNT, -> Condition counter same as KONV-ZAEHK generally it is <b>'01'</b>
COND_TYPE,
COND_VALUE,
CURRENCY.
CONDITIONS_INX - ITM_NUMBER,
COND_COUNT,
COND_TYPE,
UPDATEFLAG as <b>'U'</b>,
CURRENCY.
Hope i have clarified your query.
Kind Regards
Eswar -
Is it possible to change pricing procedure in sales order VA02
Hi,
My client need to change the pricing procedure in their RETURN order because they implemented a new pricing procedure for the specific distribution channel. However, since the return order was created with reference to invoice, the old pricing procedure was copied instead of the new that was implemented. Is there a way that they can still change the pricing procedure in the return order? Here is the scenario for better understanding.
1. Sub-distributor sales order created (distribution channel = 60) on 5/24/2014. The pricing procedure maintained was ZRVB01.
2. Delivery and Billing was created on the same date with pricing procedure ZRVB01.
3. A new pricing procedure ZRVB12 was created for distribution channel 60 on 6/2/2014.
3. Return order was created with reference to the billing document in step 2 on 6/24/2014. The pricing procedure of the return order was still ZRVB01, instead of ZRVB12.
4. In VA02, the field pricing procedure is not modifiable.
Need advice how my client can proceed in correcting the pricing procedure on their return order.
Appreciate your response.
Thank you.
EmilSince your requirement is to calculate the different price for the returned qty, please check for the return order if you can make any manually change the price as required.
Please note you can not change the pricing procedure in document, but you can change the price of the material as suggested above.
I assume you already knew the pricing procedure determination, how it is determined.(Sales area+DPP+CPP).
If you want to have different pricing procedure to be determined for the same customer in return sales , you must have the following determination so that it would be determined the 2nd pricing procedure during return order.
Example :
For standard sales : Sales area + DPP in OR(A- standard)+ CPP( 1 standard) =ZRVB01
For return Sales : Sales area + Dpp in RE (B- return)+CPP(1 standard) =ZRVB12.
thanks,
Srinu. -
How to configured pricing procedure to sales order type
Dear Sir,
Please tale me how to configure / change pricing procedure to sales order type. we have required to change pricing procedure from a to b for particular sales document type.
Regards
BK GAIKWADHI
Create a new document pricing pricedure
SPRO>sales & distribution>basic functions>Pricing>Pricing Control-->Define And Assign Pricing Procedures
and in the same path assign to your document
and assign it to your document and also then to your Pricing procedure determination in OVKK
regards
Prashanth
Edited by: Prashanth@SD on Jan 29, 2011 11:00 AM -
How can we change pricing procedure in VA02 ?
regds
JKS> Hi Jithesh,
> Were you able to find way to change the pricing
> procedure in va02? if yes please let me know.
>
> When I create RE with reference to F2, i do not want
> the pricing procedure of F2 to be copied in RE. even
> if I already assigned different pricing procedure for
> RE, still F2's is copied.
>
> Please somebody shed light on this.
>
> Best regards,
Hi,
As per your above querry the copy controls VTaf controls it, and u cannot have a new pricing procedure as desired by you since returns bussiness transaction needs the price at which the goods were supplied and may be the price might have increased now and was less when the company actually supplied so credit memo to be for original price and not the present increased price (If price increased), except taxes get redetermined. In the copy control - VTAF (Pricing type : G assigned).
I hope it can lead to more thoughts.
Regards
Reward points if i made sense
krishna -
Change Pricing procedure in sales order create
Hi,i need to create a return with reference to an billing document by using FM BAPI_CUSTOMERRETURN_CREATE. I can able to create Return sales order with reference to billing document. But i am not able to copy pricing as per billing document item. It is getting created correctly when i do manual.
Or Can i change Pricing procedure when i create sales order by using any enhancement ?
Kindly help.Hi,
Please try using the below EXITS:
USEREXIT_PRICING_RULE (module pool SAPLV61A, program RV61AFZA)
In the standard SAP system, it is predefined which condition categories and classes can be copied or recalculated per pricing type. You can change the predefined standard procedure for each pricing type.
USEREXIT_CHANGE_PRICING_RULE (module pool SAPMV61A, program MV61AFZA)
You can use this user exit to change the pricing type that has been predefined in the copying control table in billing.
Hope this might be helpful.
Regards,
Shashwath -
Change pricing procedure in Sales order based on SHIP-TO Location..
HI SAP Friends,
Based on the SHIP-TO location of the sales order, we want to have tax calculated including Freight Amt. I was thinking to come up with 2 pricing procedure; one that calculates tax including Freight amt AND the other procedure that does not calculate tax including freight amt. Hence, We want to dynamically change 'Pricing procedure' based on Ship-To location. DO we have any user exits for this ?Nirnjan
Tax calculation is based on the simple logic:
Region of Shipping Plant - region of Ship to Customer location.
In case of freight apply the acces sequence using the ship to party location field as part of condition type aqccess.
cheers
nandu -
How to change the lenth of existing field in sap standard table
Hi all,
can anybody help,my requirement is, how to change the length of existing field in sap standard table....
thanks in advance..Which field are you thinking of in particular? Are you wanting to increase or decrease the length?
Some fields are used so extensively that a change to their length will mean adjusting many tables, some of them potentially very large, and hence taking a long time to adjust.
Some standard SAP programs expect certain fields to be of specific lengths and won't work if the length is changed.
Some screens could cease to work.
If you decrease length, then you could lose data.
matt -
How to change background image in existing template?
Hi
Current website needs overall change in background image which is already set in template. Is there anyone who knows how to change background image in existing templates?Make a friend with firebug & you could find yourself from where it is getting applied.
For the website you have given the background image it is using is [1] and it is getting set in css of body tag [2]. So Find the css at [3] and modify it OR replace [1] with other image with same file name.
[1] www.hanwha.com/etc/designs/hanwha/images/bg-body.jpg
[2]
body {
background: url("images/bg-body.jpg") repeat-x scroll 50% 0 #FFFFFF;
color: #757373;
font: 14px/18px Arial,Verdana,Helvetica,sans-serif;
margin: 0;
min-width: 979px;
[3]
/etc/designs/hanwha/...../*.css
Maybe you are looking for
-
How to apply Qos in the precedence of cache server
m in an isp and iwant to apply the QOS to enhance my network internet performance actually i have two requests , i will start with showing brief topology about my network and start asking the questions . here is the topology below : from the topolo
-
Creation of SIP Configuration fails on E52
There are no SIP profiles in the at Connections->SIP. And Options->New->Standard doesn't create one. What can I do?
-
How to use custom function.
i write a custom funciton contain a sql sentence like this: SELECT sum(QTY) INTO SUM_OUTPUTQTY FROM V_DW_SALE_INVOICE WHERE V_DW_SALE_INVOICE.INVOICEDATE LIKE 'aaa%' AND P2=MENUFACTURER_ID AND P3=METERIELNAME AND P4 =SPEC AND P5=ORG_ID; the table V_D
-
Tcode to post a vendor payment reference a PO/Inocice
Hi, can anybody know how to pay for a PO/invoice? F-53 not referece to a PO/Invoice Thanks! Long
-
Hi, I have a workbook which was working fine earlier. Today I changed the underlying query by adding a new characteristic and its attributes. Since then the query does not reflect the new fields in the workbook. When executed in the query, it is work