How to change primary ADFS server (3.0) on a hybrid deployment of Office365?

Hi,
We have a hybrid deployment of Office 365 and on-premises services. I need to change my primary standalone ADFS 2.0 for a new deployment of ADFS Farm 3.0 with ADFS Proxy.
Do you have a step by step with the WAAD commands to achieve this task?
How much time does it take to apply the changes?
Thank you very much.

Once you deploy the new farm, make sure it works as expected (check
https://sts.domain.com/adfs/ls/idpinitiatedsignon.aspx). When ready,
change your firewall/LB to point to the new farm. If you have imported also the token signing/decrypting certificates, you should be all set. If you have generated new self-signed ones, you will have to run Update-MsolFederatedDomain cmdlet from
the new farm.
Or do you mean step-by-step instructions for the actual ADFS install?

Similar Messages

How to change your Administration Server password when you're locked out

How to change your Administration Server password when you're locked out
The Netscape server products are all managed by a single administration
server, which gives you a web forms-based interface you can use to
configure them, start/stop them, check their logs, and so forth.

There are three levels of protection that keep the general public from
being able to get into your administration server and mess up the
configuration of any Netscape servers you have installed:

<OL>
<LI> Obscurity: Your administration server can run on any port you'd
like (usually something between 81 and 30,000), so if an attacker
doesn't know what port to find your admin server on, he can't get
into it.
<LI> Host restrictions: You can tell your admin server to only allow
connections from specific hosts, and to reject all other hosts.

<LI> Password protection: Even if a user connects to your admin server
from a valid host, he won't be allowed to get into even the first
page unless he presents a valid username and password.
</OL>

If you, the legitimate administrator of your web server, are unable to
access the administration server (if you forgot your password or the
admin port number or if you accidentally locked your own site out),
then here is how to get past each of these levels of protection:

<OL>
<LI> If you don't remember what port your administration server is
running on, just look in your "ns-admin.conf" file, which is in
the "admserv" directory under your Netscape server directory.
(For 1.x web servers on Windows NT, run "regedt32" and go to the
"HKEY_LOCAL_MACHINE\SOFTWARE\Netscape\Administration" section).
You will see a "Port" entry there that specifies what port your
admin server is on. You can change this value if you want your
admin server to run on a different port, but make sure you restart
the admin server after you change the value.

<LI> If your admin server is complaining "Unauthorized host" when you
try to connect to it, then you can open it up to all sites by
going into the "ns-admin.conf" file or the "Administration"
section of your NT registry, as described above, and deleting the
lines for "Hosts" and "Addresses" (either one of those might not
be present) then restarting your admin server (on Unix run
"stop-admin" then "start-admin"; on NT go into the Services
control panel and stop/start the "Netscape Administration" or
"Netscape Admin Server" service). You will then be able to get
back into the admin server, where you can then try new settings
for your host and address restrictions if you wish.

<LI> If you have forgotten the password to your admin server and now
you can't log into your admin pages, all is not lost! Go into
your "ns-home" directory, and into the "admserv" directory under
that. You should find an "admpw" text file containing a simgle
line of text, something like this:
admin:lnOVeixulqkmU
The first part of that line is the name of your admin account
(usually just "admin"), and the second part is your admin
password, encrypted. Edit this file to remove the encrypted
password so that your file looks like this:
admin:
Then shut down your admin server, bring it back up again, and log
into your admin server but don't give any password. It should let
you in, at which point you can then go to the appropriate
configuration page to set a new admin password, and then you're
back in business.
</OL>
Note that because it is so easy to change the admin password this
way, it's good to periodically make certain that your admin
password file and your web server's configuration files are not
left world-writable, and that only trusted people have access to
them. (By default they're not world-writable, but it's good to
make sure of this from time to time.)

If you mean that yu forgo the password for yur encrypted backup then you can only:
Warning: If you encrypt an iPhone backup in iTunes and then forget your password, you will not be able to restore from backup and your data will be unrecoverable. If you forget the password, you can continue to back up and use the device, however you will not be able to restore the encrypted backup to any device without the password. You do not need to enter the password for your backup each time you back up or sync.
If you cannot remember the password and want to start again, you must perform a full software restore and when iTunes prompts you to select the backup from which to restore, choose set up as a new device.
Above from:
http://support.apple.com/kb/HT4946

How to Change Analysis Services Server for Power View

I can't seem to figure out how to change what SSAS server/instance that is used to build the cubes for Power View items uploaded to SharePoint. I tried changed the trusted servers listed in the Excel Services service application but if I remove the original
SSAS server (which of course is a test server, not to be used for production) and have only the prod SSAS instance listed the reports fail to load with the generic 400 error. Is there another setting that I'm missing?
Thanks,
Kyle

Hi ,
Since this issue is related to SQL Server, I will move this thread to SQL Server forum. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

How to change the web server??

How to change the web server in the details of the mobile application component in the MI webconsole??

hello irene,
had your tried checking on the "Use IP instead of host
name" checkbox?
to edit your registered application info, go to
"Upload Mobile Component" tab and click on the Edit icon
on the left part of the record list which corresponds to
the application you had just uploaded.
your application is uploaded to the same host as your
web console application is running on. if you like to
point it to a different server where you have your
archive accessible, you have to change your mcd
deployment attributes on your middleware. try the ff:
1)run tcode: mi_mcd
2)click on Create Mobile Component
3)Enter Mobile Solution Name and Version
4)Click on Display MCD
5)Select Deployment Tab
6)Click on Edit
7)Change the values of WEBSERVER and WEBPATH location eg.
if your archive is located at
http://myotherserver:80/archive/myapplication.war
your entry will be:
WEBSERVER: http://myotherserver:80
WEBPATH: /archive/myapplication.war
where you myotherserver is the name of your http host
server and myapplication.war is the name of your archive.
the archive directory is just a virtual directory where
your application archive is.
you might need to change the port number depending on
your http server port.
regards
jo

How do i change primary smtp server?

How do I change my primary smtp server? I can delete all the old accounts I no longer use as email accounts, but the primary smtp server for the accounts I still use is still set as that for the old server. Not only is there nowhere to delete it, I can't even change it! There should at least be a button to take you to that page in the iOS6 settings somewhere easy to find, like IN the same place as where it is listed.
Very annoying.

What did not work? You could not add an additional SMTP server? It does not matter what the primary is listed as....turn it off. Then turn on the additional server you added.
Better yet remove your .mac account and add it back as .me account.
.Mac to MobileMe transition FAQ
http://support.apple.com/kb/HT1932
Message was edited by: iphone3Gguy

How to change primary keys of existing InfoCube.

Greetings everyone!
Im trying to change the Key Fields in my reporting architecture as per our new company mandate. Ive been able to successfully change the primary keys for DS, DSO and InfoSource. Can any kind soul out there please tell me how to change the primary keys on an existing InfoCube? I will surely appreciate all the assistance I can get. Its kinda urgent!
Regards,
Philips

Hi,
Check the possibility with Remodelling option . If it is not possible with Remodelling, then you can only change the cube deleting the Data.
With rgds,
Anil Kumar Sharma .P

How to change the Oracle Server Hostname

Good Day every one,
Am working on Oracle Application 12.1.3
And Database 11.2.0.3
And OS RedHat linux 6.1
I want to change the Server host name how can I do this in simple steps ?
Is there is any pad impact on my server or application ?
Regards

Please also see:
How to change the hostname and/or port of the Database Tier using AutoConfig (Doc ID 338003.1)
How to change the hostname of an Applications Tier using AutoConfig (Doc ID 341322.1)
Or, use Rapid Clone.
Rapid Clone Documentation Resources For Release 11i and 12 (Doc ID 799735.1)
Cloning Oracle Applications Release 12 with Rapid Clone (Doc ID 406982.1)
Thanks,
Hussein

How to change primary email address

how do I change primary email address. Of course I won.t be able to receive any responses because my primary email address no longer exist. I.m curious why Paypal will not let me change my address on the profile page.

I found a resolution to this problem. I had been using Chrome when I had the same problem as you. I had to go to the Paypal website from Internet Explorer. Then you can go into your account settings and add a new e-mail address and go through the process of confirming it. At that point you can click on the edit button for the NON-primary email address and it will take you to the edit page where there is a box you can check to make it your primary address. Click on that box and then you can go back and delete the old primary address. Hope this helps. Worked for me.

How To change the ADF View Object query where-clause at RunTime?

I am trying to create a simple display page which will display user data (username, assoc_dist_id, assoc_agent_id, status , etc). The User data is stored in a database table and i am using an ADF Read Only table based on the View Object to display the data on the JSF page.
However, i want to display only the users that a particular person accessing the page has the AUTH LEVEL to see. e.g. If the person accessing the page is an 'ApplicationAdministrator' then the page should display all users in the table, If its a 'DistributorAdministrator' then the page should display only users associated with that Distributor (i.e. assoc_dist_id = :p_Dist_id ) and If its an 'AgentAdministrator' , then the page should display only users associated with that Agent ( i.e. assoc_agent_id = :p_Agent_id).
Currently my af:table component displays all the users in the table because the query for the view object is (select * from users) . However, i want to use the same viewobject and just set the where-clause at runtime with the appropriate parameter to restrict the dataset returned.
Do anyone knows how to accomplish this ?

David,
See the custom method initializeDynamicVariableDefaults() in the SRViewObjectImpl.java class in the FrameworkExtentions project in the SRDemoSampleADFBC sample application. You can find out how to install the demo if you haven't already from the ADF Learning Center at:
http://www.oracle.com/technology/products/adf/learnadf.html
This class is a framework extension class for view objects that adds a neat, generic feature to be able to dynamic default the value of named bind variables. You can read more about what framework extension classes are and how to use them in Chapter 25, "Advanced Business Components Techniques" of the ADF Developer's Guide for Forms/4GL Developers, also available at the learning center above.
It is an example of generic framework functionality that "kicks in" based on the presence of custom metadata properties on a named bind variable. See section 25.3.3 "Implementing Generic Functionality Driven by Custom Properties" in the dev guide for more details. Using this sample code, if you add a bind variable to a view object, and define a custom metadata property named "DynamicDefaultValue" on that bind variable, and set this custom metadata property to the value "CurrentUser", then that bind variable will have its value dynamically defaulted to the name of the authenticated user logged in. If instead you set this custom property to the value "UserRole", then the bind variable will be set to the comma-separated string containing the list of roles that the authenticated user is part of.
Once you've created a framework extension class for view objects like this, you can have the view objects you create inherit this generic functionality.See section 25.1.4 "How to Base an ADF Component on a Framework Extension Class" in the dev guide for more info on this.
By adapting a technique like this (or some idea similar that better suits your needs) you can have your view object query contain bind variables whose values automatically take on the defaults based on something in the user-session environment.

How to change Final Cut Server's time zone?

Hello all:
Is there a way to change Final Cut Server's time zone? It seems the software uses the GMT time zone as its reference. Therefore, whenever it runs on a computer located in another time zone, it still uses the GMT based timestamp.
So, for example, as my time zone is GMT less 3 hours, my FCSvr is always stamping the time as 3 hours in advance. Sometimes, this is really annoying.
My best regards,
JP.

I tried resetting Mac OS X's time zone directly in the terminal. Didn't work. After trying several times to set up another time zone, FCSvr suddenly was able to work with the PST time zone.
I was able to have a workaround by setting GMT (or PST) as my time zone, turning off the automatic date&time setting and manually setting the time, all at the date&time System Preferences.
Anyway, I don't think this is a "best practices" procedure, as FCSvr should be able to work normally with the server machine's time.
Any insights on this will be highly appreciated.
JP.

How do change my software server?

I seem to can not change my software server. It needed to be updated years ago. The laptop was not running for years. I finally got it up and running.

In rethinking your question, it seems that you have an old laptop that you once had gotten upgrades from a server rather than from Apple. If so and you didn't make a backup of the original copy of the /Library/Preferences/com.apple.SoftwareUpdate.plist file, apply the following command in Terminal:
sudo defaults delete /Library/Preferences/com.apple.SoftwareUpdate CatalogURL
Of course, you'll need the password to execute as well as the URL of the server...good luck!

Changing primary DNS server in Unity 10.5

We have a Unity server that has a DNS setting that is no longer valid. I was wondering if it would change the license MAC and invalidate the licenses if I were to change that primary and secondary DNS setting.
Thanks,
Jordan

I believe you only need to delete and add again in PLM if you do that, and you're using co-res PLM where you're changing that

How to change primary external editor

How do I change the primary external editor to Elements 11? It was an old version of PS which I removed and had hoped that since it was no longer available, LR would look for a new one as primary. I already have my Topaz products for the additional external editor. Is it possible to have more than one? If the default choice of LR is unavailable, how do i get LR to look for new one?

Removal of Photoshop has probably left settings in the Registry (if Windows). You can set up as many external editors as you like, so if you can't get it to work as the primary editor, just set it up as another extenal editor. Adobe does have a Cleaner utility to remove old stuff after uninstall. I think there is one for CS3/4 and another for CS5/6. Why uninstallers don't do this in the first place has always puzzled me!
Bob Frost

How to change primary from me to wife

how do i change the i pad from me as primary to my wife as the primary?

What do you mean change as 'primary' ?
You can log out of the account that is being used for the stores by tapping on it in Settings > iTunes & App Store and log in with a different account (any content downloaded by the currently logged in account will remain tied to that account), and for the cloud via Settings > iCloud > Sign Out

One apple tv and 2 macs:how to change primary for atv

I have an ibook g4 with an almost full memory and a new iMac. Currently the ibook G4 is the primary computer for my apple tv. I want to make my newer iMac the primary computer for synching with my apple tv so all new content will go to it and not to the ibook. My system is totaly wireless and there are no problems other than a full memory (on ibook) and unsure of messing things up badly. The iMac is already acting as second and shares files to the ibook and apple tv. How do I Switch this? I do have ipods however I don't want to do downloads ect.
I want to use the ibook for my kids so as soon as I can get this switched, they can use it for their itunes and iphoto, therefore I don't want to just eliminate all the itunes/iphoto/apple parts. The ibook's itunes also has movies and music purchase from Apple tv that I don't want to lose. It will just stay on the ibook.
Thank you for any help

Welcome to the  Discussion Forums.
From the tv select settings/computers and select the primary library at the top of the list, you can remove the existing primary library from there, use the same option (now - 'connect to itunes library'
to register a new primary library.
You can add the original primary library as a secondary library by selecting 'connect to shared library'

How to change primary ADFS server (3.0) on a hybrid deployment of Office365?

Similar Messages

Maybe you are looking for