How to change qty field as change mode to display mode in VL32N

Hi Guru's,
My requirement is for particular users quantity field in VL32N to display mode remaining users it should be in change mode.
We are already created a Security Object for this.
Can you please anyone help how to approach this requiremnt. Is there any standard BAdI for this.
Thanks in Advance.
Regards,
Sai Rama

Hi
There are Badi for this T-code
VMDE0004                                Shipping Interface: Message SDPACK (Packing, Inbound)
VMDE0003                                Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0002                                Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0001                                Shipping Interface: Error Handling - Inbound IDoc
V53W0001                                User exits for creating picking waves
V53C0002                                W&S: RWE enhancement - shipping material type/time slot
V53C0001                                Rough workload calculation in time per item
V50S0001                                User Exits for Delivery Processing
V50R0004                                Calculation of Stock for POs for Shipping Due Date List
V50R0002                                Collective processing for delivery creation
V50R0001                                Collective processing for delivery creation
V50Q0001                                Delivery Monitor: User Exits for Filling Display Fields
V50PSTAT                                Delivery: Item Status Calculation
V02V0004                                User Exit for Staging Area Determination (Item)
V02V0003                                User exit for gate + matl staging area determination (headr)
V02V0002                                User exit for storage location determination
V02V0001                                Sales area determination for stock transport
You can try with any one of them V53W0001, V50S0001, V50Q0001, V02V0004, also you can proceed with table auhtorization as there is need to check one table before entring in T-code as if user id is there then not able to edit.
Here don't make code like need to maintain all id's, if id is there then not able to edit, so to whom you don't want to allow maintain their id's in that.
Thanks
Bhupinder Singh Arora

Similar Messages

How to make the Business Area field from Change Mod to Display Mode in AS02

Hi Gurus,
I created a Customized T-code YAS02 for making the Business Area in Display mode with the help of SHD0.
But my client wants to do the same in standard T-code of AS02 and they don't like to use the customized T-code.
Kindly advise to make the Business Area from Change Mode to Display Mode in AS02.
Thanks in advance...
regs / Devi Aparna

Hi Devi,
check the following customization
asset accounting -> Integration with the General Ledger> Additional Account Assignment Objects-> Activate Account Assignment Objects---
Regards,
Ranjith

Change from edit mode to display mode

Hi ppl
In transaction CO11N , I want to change the quantity (COWB-ERFME) column of a table control
from edit mode to display mode. I created a badi implementation for WORKORDER_GOODSMVT.
This gets triggered before the screen with quantity (COWB-ERFME) is displayed. How to code, to change the column from edit mode to display mode.
I tried using transaction variant and it is working , but I want it to be plant specific. So I m trying badi.
Need ur help to go abt the coding

Hi
U make sure a method of the BADI WORKORDER_GOODSMV is called in PBO while looping table control, if it's so u can use the statament LOOP AT SCREEN.ENDLOOP:
LOOP AT SCREEN.
IF SCREEN-NAME = ....
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Max

How to Change the Fields from Input mode to display mode

Hi experts,
Here is my business requirement. I need to show certain fields in the PRICING TAB OF SALES ORDER in display mode. Now for this i am using the BADI definition CRM_PRICING_BADI.
   Now, can anybody tell me how to change the field type from input mode to change mode?

Hi Karan,
In your BADI has a parameter CT_INPUT_FIELD_NAMES with one field called CHANGEABLE with values:
     Field Can Be Changed
A     Field Cannot Be Changed
   Assing this values to your fields according with your requirements.
Regards.
Manuel

How to made Qty field as non editable in MIRO

Hi SAP Gurus,
While Post a Goods Receipt (MIRO) for Receive the Material from Job
Worker, the Qty of Raw Material which needs to Issue or consume from
Stock will propose as per PO BOM. The Qty field of Raw Material is in
Editable Mode. Business wants that Qty Field to be Non-editable and not
to allow user to Change the Proposed Qty. As per PO BOM and based on
Material Received from Job Worker, Raw Material has to Issue or Consume
from Stock. If any Under Consumption or Over Consumption will be
adjusted thru MB04.
Pls let me know is there any setting to make Raw Material Qty field as
non editable.
Thanks & Regards
Sathish
Ph:9940518715

Hi,
There is no field selection in MIRO.
USE SHD0 and create a screen variant
Thanks & regards,
Kiran

Why not all fields dimmed or show in display mode after system status TECO and CLSD for Project

Dear All,
When Sets the system status TECO or even CLSD all fields for WBS Elements are not goes to Display mode. User can still edit them or change then.
The fields are:
1. WBS Element Description, technical name: PRPS-POST1
2. Person responsible number, technical name: PRPS-VERNR
Other Progress and Customer enhancement tab pages for WBS Element all fields there also editable in TECO and CLSD system status.
The client do not want to set LOCK system status for master data option.
Is there any enhancement or standard way of doing that?
Regards
Saqib Usman

Dear Saqib,
Its a standard behavior of the system. In CLSD status, transactional data like Procurement gets restricted along with WBSE no and its scheduling details. But it allows to you change like WBSE desc./Responsible person.
Also go thru the below link for clarification of WBSE system status:
http://help.sap.com/saphelp_470/helpdata/en/ee/41f82246ee11d189470000e829fbbd/content.htm
For locking all master data, as above experts suggest, you should use MDLK/LKD.
Regards
Shishir

Project Profile Field in CJ20n is in display mode

Dear All,
When we click on create a new Project in CJ20n transaction code, the field Project profile will be in display mode. Even though i can see all my project profiles in drop down list, I am not able to select any one, as its in display mode. Where can we do the changes to make it as editable.
Regds,
CB

Hi CB,
Please check setting in OPUJ. May be project profile in display mode.
thanks
Sunil

How to make a field in custom screen as display field in screen exit

Hi ,
I have created a screen exit for CO02 with a field for item text in header level as input field , when value is given and save button is cliked it gets updated in database but the problem is same field shows as input field in CO03 ( display mode ) .
Code which i have used .
in PBO
if sy-tcode = 'CO03'.
loop at screen .
if screen-name cs 'SUBSCREEN' or screen-name cs 'RESB-POTX1'.
( subscreen - screen name given in screen editor and resb-potx1 field name given in screen editor )
SCREEN-INPUT = '0'.
modify screen.
endif.
endloop.
endif.
and even i tried in PAI too .....
if sy-tcode = 'CO01' or sy-tcode = 'CO02'.
update resb set POTX1 = RESB-POTX1
where aufnr = i_aufnr.
elseif sy-tcode = 'CO03'.
*oop at screen .
*f screen-name cs 'SUBSCREEN' or screen-name cs 'RESBD-SORTF'.
SCREEN-INPUT = '0'.
modify screen.
endif.
endloop.
endif.
but itshows as input field only ........how to make that custom field as display field in CO03

HI Andy,
Try this out.
FIrst check the sy-dynnr, if it is same as your custom screen number
in PBO of your custom screen
if sy-dynnr = 'YOUR_NUMBER' and sy-tcode = 'CS03'.
loop at screen
if screen-name = 'YOUR_SCREEN_NAME'
screen-input = 0.
modify screen
endif
endloop.
endif.
if it wont work they try using Tcode SHD0
Hope this will serve your purpose.
Regards
Ramchander Rao.K

Fields not greyed out in display mode in screen exit

Hi all,
i am working on an screen exit for CJ02 transaction. the values in the customer subscreen are getting updated in database and even it is reflecting in fields when viewed again. the problem is that in display mode (CJ03) the fields are still editable. though there is no save button, but the fields should be greyed out.
i have tried to modify screen using LOOP AT SCREEN in the function exit provided in PBO.....but it is not picking the subscreen.
please provide any solution as soon as possible.
thanks in advance

In the PBO in your screen exit:
IF sy-tcode EQ 'CJ03'.
LOOP AT SCREEN .
if screen-name 'your field'
screen-input = 0.
screen-output = 1.
MODIFY SCREEN.
ENDIF.
endif.
what enhancement are you using?
bye

Exit for CJO2, Some fields should me only in display mode

Hi Experts,
I have to do certain field of CJ02 IN non EDITABLE MODE( Only Display) .
Please suggest me which user exit can be used ?
Rgds
Mohit

Done, Using Enhancment Points

How to Set Checkbox of ALV Grid Dark on Display Mode

    ABAP experts, I want to switch between display mode and edit mode for some columns of ALV Grid. So I set "LVC_S_FCAT-EDIT" "X" for the columns which need to switch mode, and use method "SET_READY_FOR_INPUT" to switch.
    Currently, the function of switch mode has been achieved. But icons of checkbox columns are light but not dark when display mode, although the columns can't be edited. (Please refer to the image below.) I want to make checkbox columns dark as other columns on display mode.
    I tried to use "CL_GUI_ALV_GRID=>MC_STYLE_ENABLED" and "CL_GUI_ALV_GRID=>MC_STYLE_DISABLED", but failed. I also studied sample program "BCALV_EDIT_05" which is related to checkbox in ALV Grid, and compared my program with this program. But I still have not found problems.
    Help me solve this problem, please.
    Part of my codes are as follows.
    Part 1:
IF iv_is_create_group = abap_true OR iv_is_edit_group = abap_true.
       set_enable( iv_flag = 1 ).
       LOOP AT gt_acct_group_item ASSIGNING <lfs_acct_group_item>.
         CLEAR ls_celltab.
         IF <lfs_acct_group_item>-celltab IS INITIAL.
           CLEAR ls_celltab.
           ls_celltab-fieldname = 'CHECK_BOX'.
           ls_celltab-style = cl_gui_alv_grid=>mc_style_enabled.
           APPEND ls_celltab TO <lfs_acct_group_item>-celltab.
           CLEAR ls_celltab.
           ls_celltab-fieldname = 'XPORE'.
           ls_celltab-style = cl_gui_alv_grid=>mc_style_enabled.
           APPEND ls_celltab TO <lfs_acct_group_item>-celltab.
         ELSE.
           LOOP AT <lfs_acct_group_item>-celltab ASSIGNING <lfs_celltab>.
             <lfs_celltab>-style = cl_gui_alv_grid=>mc_style_enabled.
           ENDLOOP.
         ENDIF.
       ENDLOOP.
     ELSE.
       set_enable( iv_flag = 0 ).
       LOOP AT gt_acct_group_item ASSIGNING <lfs_acct_group_item>.
         IF <lfs_acct_group_item>-celltab IS INITIAL.
           CLEAR ls_celltab.
           ls_celltab-fieldname = 'CHECK_BOX'.
           ls_celltab-style = cl_gui_alv_grid=>mc_style_disabled.
           APPEND ls_celltab TO <lfs_acct_group_item>-celltab.
           CLEAR ls_celltab.
           ls_celltab-fieldname = 'XPORE'.
           ls_celltab-style = cl_gui_alv_grid=>mc_style_disabled.
           APPEND ls_celltab TO <lfs_acct_group_item>-celltab.
         ELSE.
           LOOP AT <lfs_acct_group_item>-celltab ASSIGNING <lfs_celltab>.
             <lfs_celltab>-style = cl_gui_alv_grid=>mc_style_disabled.
           ENDLOOP.
         ENDIF.
       ENDLOOP.
     ENDIF.
     CALL METHOD gr_grid->refresh_table_display
*      EXPORTING
*        is_stable      =
*        i_soft_refresh =
       EXCEPTIONS
         finished       = 1
         OTHERS         = 2
     IF sy-subrc <> 0.
*     Implement suitable error handling here
     ENDIF.
    Part 2:
METHOD set_enable.
     gr_grid->set_ready_for_input(
         i_ready_for_input = iv_flag
ENDMETHOD.

Hi Liu,
    Please go through the below code.
*& Report YEDIT_DISPLAY
REPORT YEDIT_DISPLAY.
TABLES : VBAK.
TYPE-POOLS SLIS.
TYPES : BEGIN OF TY_VBAK,
          VBELN TYPE VBAK-VBELN,
         END OF TY_VBAK,
         BEGIN OF TY_FINAL,
           BOX TYPE C,
           VBELN TYPE VBAK-VBELN,
         END OF TY_FINAL.
DATA : IT_VBAK TYPE TABLE OF TY_VBAK,
        WA_VBAK TYPE TY_VBAK,
        IT_FINAL TYPE TABLE OF TY_FINAL,
        WA_FINAL TYPE TY_FINAL,
        IT_FCAT TYPE TABLE OF SLIS_FIELDCAT_ALV,
        WA_FCAT TYPE SLIS_FIELDCAT_ALV.
START-OF-SELECTION.
   PERFORM FETCH_DATA.
   PERFORM FCAT_DATA.
   PERFORM DISPLAY.
*&      Form FETCH_DATA
*       text
* --> p1        text
* <-- p2        text
FORM FETCH_DATA .
   SELECT VBELN INTO TABLE IT_VBAK FROM VBAK UP TO 10 ROWS.
   LOOP AT IT_VBAK INTO WA_VBAK.
     WA_FINAL-VBELN = WA_VBAK-VBELN.
     APPEND WA_FINAL TO IT_FINAL.
     CLEAR : WA_FINAL , WA_VBAK.
   ENDLOOP.
ENDFORM.                    " FETCH_DATA
*&      Form FCAT_DATA
*       text
* --> p1        text
* <-- p2        text
FORM FCAT_DATA .
   WA_FCAT-COL_POS = 1.
   WA_FCAT-FIELDNAME = 'BOX'.
   WA_FCAT-TABNAME = 'IT_FINAL'.
   WA_FCAT-OUTPUTLEN = '3'.
   WA_FCAT-SELTEXT_M = 'BOX'.
   wa_fcat-checkbox = 'X'.
   WA_FCAT-EDIT = 'X'.
   APPEND WA_FCAT TO IT_FCAT.
   CLEAR WA_FCAT.
   WA_FCAT-COL_POS = 2.
   WA_FCAT-FIELDNAME = 'VBELN'.
   WA_FCAT-TABNAME = 'IT_FINAL'.
   WA_FCAT-OUTPUTLEN = '3'.
   WA_FCAT-SELTEXT_M = 'Sales Document'.
   APPEND WA_FCAT TO IT_FCAT.
   CLEAR WA_FCAT.
ENDFORM.                    " FCAT_DATA
*&      Form DISPLAY
*       text
* --> p1        text
* <-- p2        text
FORM DISPLAY .
   CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
*   I_INTERFACE_CHECK                 = ' '
*   I_BYPASSING_BUFFER                = ' '
*   I_BUFFER_ACTIVE                   = ' '
      I_CALLBACK_PROGRAM                = SY-REPID
*   I_CALLBACK_PF_STATUS_SET          = ' '
    I_CALLBACK_USER_COMMAND           = 'USER_COMMAND'
*   I_CALLBACK_TOP_OF_PAGE            = ' '
      IT_FIELDCAT                       = IT_FCAT
*   I_DEFAULT                         = 'X'
*   I_SAVE                            = ' '
     TABLES
       T_OUTTAB                          = IT_FINAL
* EXCEPTIONS
*   PROGRAM_ERROR                     = 1
*   OTHERS                            = 2
   IF SY-SUBRC <> 0.
* Implement suitable error handling here
   ENDIF.
ENDFORM.                    " DISPLAY
FORM USER_COMMAND USING UCOMM TYPE SY-UCOMM
                         RTAB TYPE slis_selfield.
   CASE UCOMM.
     WHEN '&IC1'.
       MESSAGE 'SUCESSFUL' TYPE 'S'.
     WHEN '&DATA_SAVE'.
       PERFORM FIL_FCAT.
       PERFORM DISPLAY1.
     WHEN 'BACK'.
       LEAVE TO SCREEN 0.
     WHEN OTHERS.
       LEAVE TO SCREEN 0.
   ENDCASE.
ENDFORM.
*&      Form FIL_FCAT
*       text
* --> p1        text
* <-- p2        text
FORM FIL_FCAT .
CLEAR IT_FCAT.
   WA_FCAT-COL_POS = 1.
   WA_FCAT-FIELDNAME = 'BOX'.
   WA_FCAT-TABNAME = 'IT_FINAL'.
   WA_FCAT-OUTPUTLEN = '3'.
   WA_FCAT-SELTEXT_M = 'BOX'.
   wa_fcat-checkbox = 'X'.
** WA_FCAT-EDIT = 'X'.
   APPEND WA_FCAT TO IT_FCAT.
   CLEAR WA_FCAT.
   WA_FCAT-COL_POS = 2.
   WA_FCAT-FIELDNAME = 'VBELN'.
   WA_FCAT-TABNAME = 'IT_FINAL'.
   WA_FCAT-OUTPUTLEN = '3'.
   WA_FCAT-SELTEXT_M = 'Sales Document'.
   APPEND WA_FCAT TO IT_FCAT.
   CLEAR WA_FCAT.
ENDFORM.                    " FIL_FCAT
*&      Form DISPLAY1
*       text
* --> p1        text
* <-- p2        text
FORM DISPLAY1 .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
*   I_INTERFACE_CHECK                 = ' '
*   I_BYPASSING_BUFFER                = ' '
*   I_BUFFER_ACTIVE                   = ' '
      I_CALLBACK_PROGRAM                = SY-REPID
*   I_CALLBACK_TOP_OF_PAGE            = ' '
      IT_FIELDCAT                       = IT_FCAT
*   I_DEFAULT                         = 'X'
*   I_SAVE                            = ' '
     TABLES
       T_OUTTAB                          = IT_FINAL
* EXCEPTIONS
*   PROGRAM_ERROR                     = 1
*   OTHERS                            = 2
   IF SY-SUBRC <> 0.
* Implement suitable error handling here
   ENDIF.
ENDFORM.                    " DISPLAY1
Here i written code under the SAVE button , if requires you create your own status and apply.
Regards,
Krishna

Views in MM03, how can I add fields and changes fields labels

Hi !!
I need to change some labels that appear on Sales: Sales Org 2 (view on MM03, MM02..MM01)...
Im not sure what I can do this.. Im an ABAP Programmer(beginner) and I know how I can change labels of fields in programs(reports) that I did...but in This case. I don't know what I can do...
example: when I enter on MM03..I select differents views(including Sales: Sales Org 2), later I specify sales Org and distribution Channel (I need to specify this information for see these fields on this TAB Sales: Sales Org 2).
When I access in tab: Sales: Sales Org 2, I can see one Group that it's called
Material Groups that contain two fields called MVKE.MVGR1 AND MVKE.MVGR5... I saw in the screen these fields with the description from each field..example: Material Group 1 (MVKE.MVGR1 )... I would like to know :
1.- How Can I change the description Material Group 1 (in this screen) by other description (example: material test)...
2.- How can I add more fields in this group...example..If I need to add MVKE.MVGR2 ..??
I will appreciate your help!!!
I will give you points for your answer
Alice

Hi Alice,
And do I need to change in this section too.... SPRO -> SAP Reference IMG -> Logistics general -> Material master -> configuring the material master -> ...
If I need to add some values???
After you made label changes on custom screen then you need to go configuration (Define Structure of Data Screens for Each Screen Sequence) to replace the standard SAP screen with custom screen. You can also do testing for custom subscreen as well. Give it try.
And how about If I move this screen??...is it dangerous??...or how can I know if this screen affect other section of programs?
I do not understand your questions. Can you elaborate more?
Regards,
Ferry Lianto

How change standard field lable in alv grid display

Hi Experts,
    How are you doing! I am having some doubts in the alv grid display, I am new to this concepts.
I want to display field lable manually, actually its taking from table field discription but I want to display one field name manually.
example code.
ls_fldcat-fieldname = 'BPKIND'.
ls_fldcat-ref_tabname = 'BUT000'.
ls_fldcat-ref_fieldname = 'BPKIND'.
APPEND ls_fldcat TO lt_fldcat.
ls_fldcat-fieldname = 'PARTNER2'.
ls_fldcat-ref_tabname = 'BUT051'.
ls_fldcat-ref_fieldname = 'PARTNER2'.
Here I dont want to display 'PARTNER2' I need 'KEY ACCOUNT MANAGER'.
Please send me how to do this.
Surya Ramireddy.

Hi
Please check out this program.
Type-pools: slis.
Tables: likp.
Data: Begin of i_likp occurs 0,
        vbeln like likp-vbeln,
        ernam like likp-ernam,
        erzet like likp-erzet,
        erdat like likp-erdat,
      End of i_likp.
Data: it_fieldcat type slis_t_fieldcat_alv,
      wa_fieldcat type SLIS_FIELDCAT_ALV,
      it_events type slis_t_event.
Selection-screen: Begin of block b1 with frame title text-001.
select-options: s_vbeln for likp-vbeln.
Selection-screen: End of block b1.
start-of-selection.
perform get_sales_header_data.
end-of-selection.
perform field_catalogue.
perform modify_field_catalogue.
perform display_alv_grid_display.
*&      Form get_sales_header_data
      text
--> p1        text
<-- p2        text
form get_sales_header_data .
select vbeln
       ernam
       erzet
       erdat
       into table i_likp
       from likp
       where vbeln in s_vbeln.
endform.                    " get_sales_header_data
*&      Form field_catalogue
      text
--> p1        text
<-- p2        text
form field_catalogue .
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
   I_PROGRAM_NAME               = sy-repid
   I_INTERNAL_TABNAME           = 'I_LIKP'
   I_INCLNAME                   = sy-repid
CHANGING
    ct_fieldcat                  = it_fieldcat
EXCEPTIONS
   INCONSISTENT_INTERFACE       = 1
   PROGRAM_ERROR                = 2
   OTHERS                       = 3
endform.                    " field_catalogue
*&      Form modify_field_catalogue
      text
--> p1        text
<-- p2        text
form modify_field_catalogue .
loop at it_fieldcat into wa_fieldcat.
case wa_fieldcat-fieldname.
when 'VBELN'.
   wa_fieldcat-col_pos = 1.
   wa_fieldcat-seltext_l = 'Sales Doc Header No'.
   wa_fieldcat-emphasize = 'C100'.
when 'ERNAM'.
   wa_fieldcat-col_pos = 2.
   wa_fieldcat-seltext_l = 'Created By'.
   wa_fieldcat-emphasize = 'C200'.
when 'ERZET'.
   wa_fieldcat-col_pos = 3.
   wa_fieldcat-seltext_l = 'Entry Time'.
   wa_fieldcat-emphasize = 'C300'.
when 'ERDAT'.
   wa_fieldcat-col_pos = 4.
   wa_fieldcat-seltext_l = 'Created On'.
   wa_fieldcat-emphasize = 'C400'.
endcase.
modify it_fieldcat from wa_fieldcat.
endloop.
endform.                    " modify_field_catalogue
*&      Form display_alv_grid_display
      text
--> p1        text
<-- p2        text
form display_alv_grid_display .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   I_CALLBACK_PROGRAM                = sy-repid
   IT_FIELDCAT                       = IT_FIELDCAT
TABLES
    t_outtab                          = i_likp
EXCEPTIONS
   PROGRAM_ERROR                     = 1
   OTHERS                            = 2
endform.                    " display_alv_grid_display
Regards
Haritha.

Change on process chain not visible in display mode after transport

All,
We have changed a process chain where message notification was active in development.
We have deleted the notification and created a transport. This has been released and implemented into the QA system without a problem.
When displaying the new process chain in QA the change was not visible. But in change mode it is.
Can anyone tell us what might be a cause/solution for this? Also for future changes.
Gui error??
Thanks in advance.

hi,
Try activating the PC again in the QA.
if still it does reflect the message notification, then try creating the request again
in DEV and transport.
make sure you r out of the Process chains in DEV nad QA when transport happens.
This is just a practice.
Regards,
Dhanya.

How to get back fields from INSERT statement in batch mode(getGeneratedKeys

Hi,
I wanted to insert records to database and get back some fields.
I create prepared statement:
preparedStatement = connection.prepareStatement(sqlQuery, columnIndexes);
then I set parameters.
Following code works properly:
preparedStatement.executeUpdate();
generatedKeys = preparedStatement.getGeneratedKeys();
if (generatedKeys.next()) {
doSomething();
But when I try to do this by batch I get exception:
Caused by: java.lang.ArrayIndexOutOfBoundsException: 22
     at oracle.jdbc.driver.T4CNumberAccessor.unmarshalOneRow(T4CNumberAccessor.java:190)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:612)
     at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:216)
     at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:966)
     at oracle.jdbc.driver.OraclePreparedStatement.executeBatch(OraclePreparedStatement.java:10644)
     at org.jetel.component.DBOutputTable.runInBatchMode(DBOutputTable.java:619)
My "batch" code:
for(...){
setParameters(preparedStatement);
preparedStatement.addBatch();
preparedStatement.executeBatch();
Isn't it a bug?
Can I get back fields (eg. from last insert added to batch)?
I hope somebody can help me.
Agata

This code works for me but only inserting one row. More than one causes an ArrayIndexOutOfBoundsException once sendBatch is called.

How to change qty field as change mode to display mode in VL32N

Similar Messages

Maybe you are looking for