Can't use Canon iR C4580i to print after upgrading to Mavericks

Can anyone help to solve the problem?
I have tried to download the driver version 10.2.0 but still cannot use canon iR C4580i to print.
Thanks

Hey WKWF,
Thanks for the question, and welcome to Apple Support Communities.
The following article provides relevant troubleshooting information for your issue:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/TS3147
USB printers and Bonjour-enabled network printers
Follow these steps until the issue is addressed:
1. Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
2. Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
3. Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
4. Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
5. Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
1. Reset the printing system, then add the printer again.
2. If the issue still persists, reset the printing system again.  Download and install your printer's drivers. Then, add the printer again.
3. Contact the printer vendor or visit their website for further assistance.
Thanks,
Matt M.

Similar Messages

  • HT4623 Can I use lightning SD camera card reader after upgrading my iPad 4 to iOS. 7?

    Hi! All,
    I am using lightning SD camera reader with my iPad 4 running with iOS 6 without any problem. But I would like to upgrade to iOS 7. I saw some reviews
    after upgrading the card reader is not working. I contacted apple support community people for the above issue recently through chat. They said the device should work even after upgrading. I have not yet upgraded. But iOS 7 is tempting with its amazing look. What do I do? If I upgrade and my SD card reader wont work then I will be in great disapppointment. Please help if any body has answer for my problem..
    Message was edited by: hemanthkumar.narsetti
    Message was edited by: hemanthkumar.narsetti

    If your SD card reader is from Apple, you shouldn't have any problems. If your card reader is from a 3rd party source, it's possible to have a problem. Do the update.
     Cheers, Tom

  • Very slow printing after upgrading to Mavericks and reinstalli​ng HP s/w for an Officejet 8600?

    Before upgrading to Mavericks, my HP 8600s (have 2) would zing at printing.  Now they are incredibly slow.  I had to do a Restore after my operating system upgrade and after that, the HP folder was not in the Applications Folder.  That caused me to reiinstall the HP s/w for the 8600  which I downloaded from the HP website taking care to download and install exactly as was prescribed for the Mavericks scenario.  I'm wondering if the problem is that I chose the bonjour versions of each printer when I reinstalled to each printer.  
    An idea of what I mean by slow is a one and half page letter is taking over 5 minutes to print whereas it used to print at about 30 seconds.
    I need some help on this ASAP because my home-office is at a standstill.  Many thanks.
    Tulsa Lawyer

    Hi BerniePiel,
    Choosing the Bonjour version means you have chosen the wireless option. Bonjour is a technology that is built into Mac OS and iOS. This technology discovers devices such as printers that are installed on the same network as a Mac or Apple mobile device. Bonjour is the default method for discovering devices on a network.
    I can certainly help you with this. When you added the printer, did you add the printer with the 'AirPrint' driver or are you using the HP driver? Us the screenshot below to help you check.
    If you do not see AirPrint next to your printer name as shown above, delete the printer and re-add it. When you click the plus symbol you need to choose 'add another printer or scanner', then select your printer and choose the HP driver next to 'Use'.
    If the issue persists, or you were already using the HP driver, try the following steps.
    Reset Printing System
    Click the Apple icon (   ), and then click  System Preferences.
    In the Hardware section, click  Print & Fax/Scan. The Print & Fax/Scan  dialog box opens.
    Right-click (or  Ctrl  +click) in the left panel, and then click Reset printing system…
    Click OKto confirm the reset.
    Type the correct  Name and Password.
    Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
    Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
    Repair Disk Permissions 
    On the Dock, click Applications, and then click  Utilities.
    Double-clickDisk Utility.
    Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
    Click the Repair Disk Permissions  button at the bottom of the window.
    Once the repair is complete, restart the computer.
    Restart the computer
    Once these steps have been complete, re-add the printer again, and print. Please let me know if this resolves the issue. If the issue persists I will gladly follow up and continue to work with you.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • HP p1006 won't print after upgrade to Mavericks

    After upgrading from 10.8 to 10.9 my computer won't print anymore.  It says "Pages not found!" 
    The printer is attached to a Mac server running 10.8 which is printing fine, but my computer (running 10.9) won't print unless I boot it from the 10.8 partition which still works.
    What I've already tried:  (on my computer & server)
    Reset the printing system
    updated drivers to HPPrinterDriver2.16.1
    Repaired permissions

    Hi zmogy,
    Welcome to the HP Forums, I hope you enjoy your experience!
    I understand you are unable to print on the 10.9.
    I will be happy to help you.
    The HPPrinterDriver2.16.1 is the latest HP printing and scanning software for OS X Mountain Lion, OS X Lion and Mac OS X v10.6 Snow Leopard.
    Plug the printer directly into the 10.9 computer and run the Apple Updates to install the Apple drivers.
    OS X v10.9 Mavericks: Installing and Using the Printer on a Mac.
    Test the printing.
    I can't guarantee it will print over the server.
    Hope this helps.
    Thank you for posting on the HP Forums.
    Have a nice day!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Why can't I get an external HDMI display after upgrading to Maverick?

    I've been hunting all over for an answer to this problem.  I upgraded to Maverick in the fall and recently discovered that I can no longer get a picture on an external TV via Thuderbolt + HDMI.  I've used new connectors and cords.  Apparently others are having similar issues after upgrading.
    I've tried the SMC reset option, but it has not rectified anything.  I've unchecked the "display as separate spaces" option.  Nothing seems to work and I've searched all over the support community for the answer, which can be extremely daunting.
    Allen

    You said you have a workstation with 4 drives, not a notebook.
    And you have not reformatted in years.
    Just clone Mac OS X Lion (and Lion Recovery) to anotehr hard drive with Carbon Copy Cloner.
    Cloning as a Backup Strategy
    Or backup and erase the DRIVE, like WDxxxxx and not your "Macintosh HD" volume and restore.
    Reformatting is a good idea when moving to a new OS and lot of changes to partition structure go on each time, sometimes even mid-stream of a version.

  • Do I need to download drivers for an HP 8600 all in one printer after upgrading to Mavericks from Mountain Lion?

    I am about to upgrade my Mac's OS from Mountain Lion to Mavericks.   I recently networked to my Mac on our home wireless network an HP 8600 all in one printer/scanner and an HP LaserPro 127.   I saw a note posted in a non-Apple forum stating that the Mavericks upgrade should include the drivers needed to run these products on Mavericks.   Is that correct or will I need to download a new set of drivers from HP after I upgrade to Mavericks?
    Any guidance would be appreciated.

    Hi mcubed33,
    Welcome to the Support Communities!
    The article below may be able to help you with this.  Click on the link below for more information:
    OS X: Printer and scanner software available for download
    http://support.apple.com/kb/HT3669
    Apple delivers third-party software for scanners and printers using Software Update. To set up your printer or scanner, just connect it to your Mac. If software is needed and available, OS X automatically downloads and installs it.
    This article is a comprehensive list of currently supported printer and scanner models and associated software provided by third-party vendors as of 23 January 2014.
    OS X Mavericks: Set up a printer
    http://support.apple.com/kb/PH14143
    Cheers,
    - Judy

  • Problem with Hp printer after upgrade to Maverick OS

    Scan pages, when saved to computer when click to save the pages and try to open saved documents their all black and have lines on them.( upgraded to mavericks OS) , before upgrade, the printer was working fine.
    Mac 27-inch, Late 2009
    HP Photosmart Premium Fax e-All-in-One Printer - C410a

    Try a reset  >  OS X Mavericks: Reset the printing system

  • My cannon MF8350 will no longer print after upgrading to mavericks

    My printer is on a network that was running fine with Mountain Lion.  Yesterday I upgraded to OS X and now when I go to print I get the message, "printer is not responding."  I've tried restarting the computer, the printer, reloading the printer to the network using bonjure.  It finds the printer on the network but I still get the message when I go to print a document.

    I suspect that an old driver is in use. Try Resetting Print System and then add again and try printing.
    http://support.apple.com/kb/ht1341

  • Problem with shared printer after upgrade to Maverick

    Hi Guys,
    I have one iMac and two windows PC which connect to the same WiFi router.
    The iMac has a HP LaserJet CP2025 attached to its USB port and shared with other windows PCs with no problem.
    Until I upgrade my iMac to Maverick recently, now those PCs cannot see the shared printer anymore.
    Do you have any ideas what configuration is changed in the Maverick which could cause this please?
    I have been searching through Apple communities and other tech forums and have tried many solution, but still cannot solve this. (I have also tried setting up LDP, but no luck so far)
    PS ... Shared files seems to work fine. I can access (read/write) the shared files/folders from windows with no problem (SMB and AFP enable).
    Any ideas, pointers or links would be appreciated.
    Cheers,
    ChaaPru

    Try a reset  >  OS X Mavericks: Reset the printing system

  • No printing after upgrade to Mavericks

    I updated to Mavericks today. Lost my printer and scanner.
    Pixma MP130 and CanoScan LIDE 25
    I am sure with my previous OSX version that I just plugged these devices into my usb and they were recognised immediatly
    But not with Mavericks. And no drivers available either.

    This worked for me:
    uninstall all printer manufacturer software apps.
    go to system preferences > printers & scannerscontrol click on your printer in the column on the left, and select reset print system, and in the next dialog, reset.
    do a factory reset on your printer
    go back to printers & scanners and let it download the drivers from Apple.
    printer will probably work.
    do the same with Image Capture, let it download the driver.
    In my case, after the factory reset on the printer, I also had to reset my wifi, and enter my wifi password to get my printer/scanner back on my wifi network.
    I find that except for the drivers, the printer manufacturer software is often problematic. When I buy a new printer I leave that shiny new CD that comes with it in the envelope.

  • Can't get Canon iR-ADV C5250 printer to work on Yosemite

    Can't get Canon iR-ADV C5250 printer to work on Yosemite; keep getting "printer is not responding."
    I did try and install the driver for Mavericks first. I *have* deleted printer and appropriate /Library files. And re-installed using "UFRII_v10.06.00_Mac.dmg" which is the equivalent of what worked on the previous Macbook Air.
    We do use Dept. ID Management. I know how to set that up.  Although we do not use a PIN.  Again in other macs and computers that's not an issue.
    PAHU? :-)
    Thanks!
    David

    Hi David,
    Sorry for the late reply. Printer not responding is typically an issue with the protocol or the wrong network address. Easiest way to check that the correct IP address has been used is to enter the IPv4 address into a web browser on the Mac. This should result in you connecting to the internal web page of the C5250. If this does happen, then you know the IP address used to create the printer was correct.
    As for the protocol, the UFR2 driver supports LPD and HP Jetdirect-Socket. It does not support IPP. And there have been some users who have found even the LPD protocol will not communicate with the printer, so check that you are using HP Jetdirect-Socket. If you cannot remember what protocol was used when creating the queue, then you can open System Information (Applications > Utilities) and then select Printers in the left column. If you have more than one printer on this Mac, the top right pane will list them. Select the C5250 to see its information in the bottom right pane. Then look for the entry of URI. This is the print queue. It should show socket://ip-address, indicating the HP Jetdirect-Socket was used. If it shows lpd or ipp then you know one of the other protocols was used.
    Hope this helps. Reply if you need more assistance.
    PaHu

  • How can I use my Dell photo 924 printer with my iMac

    How can I use my Dell photo 924 printer with my iMac, I have tons of ink and don't want to buy a new printer right now.

    People who need to SCAN & PRINT without a compatible driver from their manufacturer can use Apple's very basic "PRINT & SCAN" utility in System Preferences:
    Click the Apple menu ( ), and then click System Preferences .
    Click Print & Scan ( ).
    Click Scan , and then click Open Scanner .
    Click Show Details . The details of the scan display, including options to modify scan settings such as output type.Figure 2: Example of the Show Details scanning screen
    Change any settings as necessary, and then click Scan .
    Hope this helps

  • Canon Printer LBP 3050 can't print after updated to Mavericks

    Hi Sir,
    Canon LBP 3050 can't print after updated to Mavericks.OS X 10.9.1
    Have tried updated the printer to the lastest Driver " Mac_CAPT_V365_uk_EN"
    http://support-sg.canon-asia.com/P/search?model=LBP3050&menu=download&filter=0&t agname=g_os&g_os=OS%20X%20v10%2E9
    Problem still can't be solve,
    Printing state - Apple - Support -Check Your Service and Support Coverage.
    Neep help in this problem solving, anyway to solve ?
    Thank you!.
    Will Appreciate your Help.
    Best Regards
    Esther

    Try resetting the printing system.
    Reset Printing System

  • Can i use my iphone 4 to print from my brother mfc660cn?

    can i use my iphone 4 to print. I have a Brother MFC660CN printer.
    When i try and print form the brother iprint&scan the phone say nocompatible device found.

    Hi,
    You may print using the HP ePrint Home & Biz app.
    You may find the installation and usage instructions below:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02775166&cc=us&dlc=en&lc=en&product=391194&tmp_...
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Can you use Time Capsule as a print server for printers connected via Ethernet or wirelessly?

    Can you use Time Capsule as a print server for printers connected via Ethernet or wirelessly?
    I know that it works marvelous for printers connected via USB, but I'd like to know if you can use it as a more general print server.

    No, you can't, but what do you expect to gain by doing so?
    The main advantage of the print server is to provide multi-user network access to a printer that typically only supports a single connection. Since, by definition, your printer already has a network connection and can be used by multiple users.

Maybe you are looking for

  • Opening stock on date wise

    Hi SD Gurus, To prepare a Customized report on Stock statement, I need the opening stock  of each material on date wise. In MB5B, I am getting the opening stock. I have to give input to my ABAPer where to pick this value. Pl give your valuable inputs

  • User license query while integrating with SAP HR system

    One of our clients wants to develop  web based employee self service applications (web enabled modules) on their existing SAP HR suite. Currently they are on SAP HR , ECC 5.0 Would they need to buy extra licenses for integration with the existing sys

  • Import Product Price and Condition using LSMW IDoc method

    Hi Friends, I am working on the Product Import to CRM from flat file using LSMW IDoc method using the "CRMXIF_PRODUCT_MATERIAL_SAVE" message type. I am able to import the entire product with its required details except the Price and its conditions. C

  • Is there a manual for the EE Harrier Mini?

    I am not used to android phones and would like help in making calls etc

  • T CODE OF DIVISION AND DISTRIBUTION cHANNEL

    Hi All, I want to know the T code of division and distribution channel. Rgds Abhishek