How to change the CORE-id/ Access server audit time from GMT to local

When we enabled the auditing for CORE-Id and Access server, we noticed a mismatch on the time stamp. The ‘eventDateAndTime’ field for CORE-id server has audited the event in local time while the same for Access server is audited as GMT time. We wanted to make it consistent for both the servers; preferably to the local time.
Any idea, How to do it?

Hello,
Try using this
rd = new ReportDocument();
        rd.Load(Server.MapPath("CrystalReport1.rpt"));
        cninfo = new ConnectionInfo();
        //Name of server to which you want to change to runtime
        cninfo.ServerName = "D-3206";
        //Name of database to which you are changing
        cninfo.DatabaseName = "tempdb";
        //username
        cninfo.UserID = "sa";
        //password
        cninfo.Password = "sa";
        crDatabase = rd.Database;
        crTables = crDatabase.Tables;
        foreach (CrystalDecisions.CrystalReports.Engine.Table crTable in rd.Database.Tables)
            // Get the TableLogOnInfo from the Table and then set the new
            // ConnectionInfo values.
            TableLogOnInfo crLogOnInfo = crTable.LogOnInfo;
            crLogOnInfo.ConnectionInfo = cninfo;
            // Apply the TableLogOnInfo
            crTable.ApplyLogOnInfo(crLogOnInfo);
            // Set the location of the database. This value will vary from          // database to database.
            crTable.Location = crTable.Location; //"DATABASE.OWNER.TABLENAME";
CrystalReportViewer1.ReportSource = rd;
Thanks,
Bhushan.

Similar Messages

How to change the language setting in Adobe Flash CS6, from Chinese to English?

How to change the language setting in Adobe Flash CS6, from Chinese to English?

Unless you have a multilanguage serial/ installer, you are on Creative Cloud or care to run through language swap you can't. Retail serial numbers are language specific and most Adobe apps cannot be coerced or switched on the fly since without the proper language resources installed, this won't work...
Mylenium

How to change the primary outgoing mail server in iphone

I am trying to change the primary outgoing mail server from Yahoo to another mail which is my internet provider. I do not know the steps to complete this in my iphone thanks

If you have more than one email account on your phone, you can change the default account under Settings>Mail, Contacts, Calendar>Default Account. Note that this setting does not appear unless you have more than one account on your phone. So, you'll need to add the email account from your ISP under Settings>Mail, Contacts, Calendars>Add New Account if you have not already done so.

How to change Host of Oracle Access Server

Hello guys,
Could you help me about on doubt?
I configured Access Server in Access Administration and installed it in the server. But i saw now i forgotted about the correct hostname of this configuration. Is not a machine name and i need to change to the LBR name. Can i delete this access server , create another one with the same name without install again the File Systems?
best regards,
Thiago Leôncio.

It's not clear from your question which components of OAM you are referring to.
I'll presume you are talking about the aaa server process and it's LDAP connection, you can handle this by reconfiguring the product. Look in /access/oblix/tools/ for a setup or configure folder containing an executable. Running that will allow you to reset the bootstrap configuration information.
Not knowing much about your installation, I'll offer a caution that it is unusual to point an Access Server to a lb for configuration information. You can get away with it for RACed OID LDAP platforms but otherwise, I'm pretty sure it's not a supported path.
Mark

How can change the hair to an image every time and how can save the edit image into albums give me code

HI, I am small iphone developer,i have one problem in my app,please give the guidence to me.
THIS IS MY PROBLEM:
          I HAVE SELECTED ONE PICTURE FROM ALBUMS OR TAKE PICTURE FROM CAM SO I WANT TO CHANGE THE HAIR STYLES PART WITH ANOTHER HAIR STYELS AND SAVE THE PICTURE INTO ALBUMS HOW CAN GENRATE THE CODE OR LOGIC TO ME......I AM TRYING IT FROM 3WEEKS SO COULD YOU PLEASE GIVE ME GUIDENCE TO ME.................

HI, I am small iphone developer,i have one problem in my app,please give the guidence to me.
THIS IS MY PROBLEM:
          I HAVE SELECTED ONE PICTURE FROM ALBUMS OR TAKE PICTURE FROM CAM SO I WANT TO CHANGE THE HAIR STYLES PART WITH ANOTHER HAIR STYELS AND SAVE THE PICTURE INTO ALBUMS HOW CAN GENRATE THE CODE OR LOGIC TO ME......I AM TRYING IT FROM 3WEEKS SO COULD YOU PLEASE GIVE ME GUIDENCE TO ME.................
Sir I am did it by using Objcetive-C code in iphone as fallows
demoprojectViewController.h
#import <UIKit/UIKit.h>
@interface demoprojectViewController : UIViewController<UIImagePickerControllerDelegate,UINavigationControllerDelegate >
    UIImageView *imageView,*editingimage,*maskimage;
     UIButton *takePictureButton;
    UIButton *selectFromCameraRollButton;
    UIView *myview;
@property(nonatomic,retain)IBOutlet UIImageView *imageView;
@property(nonatomic,retain)IBOutlet UIImageView *maskimage;
@property(nonatomic,retain)IBOutlet UIImageView *editingimage;
@property(nonatomic,retain)IBOutlet UIButton *takePictureButton;
@property(nonatomic,retain)IBOutlet UIButton *selectFromCameraRollButton;
@property(nonatomic,retain )IBOutlet UIView *myview;
- (IBAction)getCameraPicture:(id)sender;
- (IBAction)selectExistingPicture;
-(IBAction)pickHair:(id)sender;
-(IBAction)done;
-(IBAction)back;
@end
demoprojectViewController.m
#import "demoprojectViewController.h"
@implementation demoprojectViewController
@synthesize imageView,editingimage,maskimage;
@synthesize takePictureButton;
@synthesize selectFromCameraRollButton;
@synthesize myview;
CGFloat lastScaleFactor = 1;
CGFloat netRotation;
CGPoint netTranslation;
NSArray *images;
int imageIndex = 0;
- (void)didReceiveMemoryWarning
    // Releases the view if it doesn't have a superview.
    [super didReceiveMemoryWarning];
    // Release any cached data, images, etc that aren't in use.
#pragma mark - View lifecycle
// Implement viewDidLoad to do additional setup after loading the view, typically from a nib.
- (void)viewDidLoad
   // maskimage=[[UIImageView alloc]initWithFrame:CGRectMake(50, 50, 150, 150)];
    //maskimage.image=[UIImage imageNamed:@"1.png"];
    if ([UIImagePickerController isSourceTypeAvailable:
          UIImagePickerControllerSourceTypeCamera]) {
        takePictureButton.hidden = NO;
        selectFromCameraRollButton.hidden = NO;
       UITapGestureRecognizer *tapGesture =
        [[UITapGestureRecognizer alloc]
         initWithTarget:self
         action:@selector(handleTapGesture:)];
        tapGesture.numberOfTapsRequired = 1;
        [maskimage addGestureRecognizer:tapGesture];
        [tapGesture release];
        UIPinchGestureRecognizer *pinchGesture =
        [[UIPinchGestureRecognizer alloc]
         initWithTarget:self
         action:@selector(handlePinchGesture:)];
        [maskimage addGestureRecognizer:pinchGesture];
        [pinchGesture release];
        ///---rotate gesture---
        UIRotationGestureRecognizer *rotateGesture =
        [[UIRotationGestureRecognizer alloc]
         initWithTarget:self
         action:@selector(handleRotateGesture:)];
        [maskimage addGestureRecognizer:rotateGesture];
        [rotateGesture release];
        //---pan gesture---
        UIPanGestureRecognizer *panGesture =
        [[UIPanGestureRecognizer alloc]
         initWithTarget:self
         action:@selector(handlePanGesture:)];
        [maskimage addGestureRecognizer:panGesture];
        [panGesture release];
        //---swipe gesture---
        images = [[NSArray alloc] initWithObjects:
                  @"1.png",
                  @"2.png",
                  @"3.png", nil];
        //---right swipe (default)---
        UISwipeGestureRecognizer *swipeGesture =
        [[UISwipeGestureRecognizer alloc]
         initWithTarget:self
         action:@selector(handleSwipeGesture:)];
        [maskimage addGestureRecognizer:swipeGesture];
        [swipeGesture release];
        //---left swipe---
        UISwipeGestureRecognizer *swipeLeftGesture =
        [[UISwipeGestureRecognizer alloc]
         initWithTarget:self
         action:@selector(handleSwipeGesture:)];
        swipeLeftGesture.direction = UISwipeGestureRecognizerDirectionLeft;
        [maskimage addGestureRecognizer:swipeLeftGesture];
        [swipeLeftGesture release];
    [super viewDidLoad];
-(IBAction) handleTapGesture:(UIGestureRecognizer *) sender {
    if (sender.view.contentMode == UIViewContentModeScaleAspectFit)
        sender.view.contentMode = UIViewContentModeCenter;
    else
        sender.view.contentMode = UIViewContentModeScaleAspectFit;
-(IBAction) handlePinchGesture:(UIGestureRecognizer *) sender {
    CGFloat factor = [(UIPinchGestureRecognizer *) sender scale];
    if (factor > 1) {
        //---zooming in---
        sender.view.transform = CGAffineTransformMakeScale(
                                                           lastScaleFactor + (factor-1),
                                                           lastScaleFactor + (factor-1));
    } else {
        //---zooming out---
        sender.view.transform = CGAffineTransformMakeScale(
                                                           lastScaleFactor * factor,
                                                           lastScaleFactor * factor);
    if (sender.state == UIGestureRecognizerStateEnded){
        if (factor > 1) {
            lastScaleFactor += (factor-1);
        } else {
            lastScaleFactor *= factor;
//---handle rotate gesture---
-(IBAction) handleRotateGesture:(UIGestureRecognizer *) sender {
    CGFloat rotation = [(UIRotationGestureRecognizer *) sender rotation];
    CGAffineTransform transform = CGAffineTransformMakeRotation(
                                                                rotation + netRotation);
    sender.view.transform = transform;
    if (sender.state == UIGestureRecognizerStateEnded){
        netRotation += rotation;
//---handle pan gesture---
-(IBAction) handlePanGesture:(UIGestureRecognizer *) sender {
    CGPoint translation =
    [(UIPanGestureRecognizer *) sender translationInView:maskimage];
    sender.view.transform = CGAffineTransformMakeTranslation(
                                                             netTranslation.x + translation.x,
                                                             netTranslation.y + translation.y);
    if (sender.state == UIGestureRecognizerStateEnded){
        netTranslation.x += translation.x;
        netTranslation.y += translation.y;
-(IBAction) handleSwipeGesture:(UIGestureRecognizer *) sender {
    UISwipeGestureRecognizerDirection direction =
    [(UISwipeGestureRecognizer *) sender direction];
    switch (direction) {
        case UISwipeGestureRecognizerDirectionUp:
            NSLog(@"up");
            break;
        case UISwipeGestureRecognizerDirectionDown:
            NSLog(@"down");
            break;
        case UISwipeGestureRecognizerDirectionLeft:
            imageIndex++;
            break;
        case UISwipeGestureRecognizerDirectionRight:
            imageIndex -- ;
            break;
        default:
            break;
    imageIndex = (imageIndex < 0) ? ([images count] - 1):
    imageIndex % [images count];
    imageView.image = [UIImage imageNamed:
                       [images objectAtIndex:imageIndex]];
#pragma mark -
- (IBAction)getCameraPicture:(id)sender {
    UIImagePickerController *picker =
    [[UIImagePickerController alloc] init];
    picker.delegate = self;
    //picker.allowsImageEditing = YES;
    picker.sourceType = (sender == takePictureButton) ?
    UIImagePickerControllerSourceTypeCamera :
    UIImagePickerControllerSourceTypeSavedPhotosAlbum;
    [self presentModalViewController:picker animated:YES];
    [maskimage removeFromSuperview];
    [picker release];
- (IBAction)selectExistingPicture {
    if ([UIImagePickerController isSourceTypeAvailable:
         UIImagePickerControllerSourceTypePhotoLibrary]) {
        UIImagePickerController *picker =
        [[UIImagePickerController alloc] init];
        picker.delegate = self;
        picker.sourceType = UIImagePickerControllerSourceTypePhotoLibrary;
        [self presentModalViewController:picker animated:YES];
        [maskimage removeFromSuperview];
        [picker release];
    else {
        UIAlertView *alert = [[UIAlertView alloc]
                              initWithTitle:@"Error accessing photo library"
                              message:@"Device does not support a photo library"
                              delegate:nil
                              cancelButtonTitle:@"Drat!"
                              otherButtonTitles:nil];
        [alert show];
        [alert release];
#pragma mark -
- (void)imagePickerController:(UIImagePickerController *)picker
        didFinishPickingImage:(UIImage *)image
                  editingInfo:(NSDictionary *)editingInfo {
    imageView.image = image;
    [picker dismissModalViewControllerAnimated:YES];
- (void)imagePickerControllerDidCancel:(UIImagePickerController *)picker {
    [picker dismissModalViewControllerAnimated:YES];
- (IBAction)btnSave_Clicked:(id)sender;
    UIImageWriteToSavedPhotosAlbum(editingimage.image, nil, nil, nil);
    //UIImageWriteToSavedPhotosAlbum(imageView.image, nil, nil, nil);
    UIAlertView *alert = [[UIAlertView alloc]initWithTitle:@"Success" message:@"Image saved successfully to iPhone photo albums..." delegate:nil cancelButtonTitle:@"Ok" otherButtonTitles:nil];
    [alert show];
    [alert release];
-(IBAction)pickHair:(id)sender;
       //[maskimage setMultipleTouchEnabled:YES];
   // [maskimage setUserInteractionEnabled:YES];
    //[maskimage setContentMode:UIViewContentModeScaleAspectFit];
    maskimage.image=[UIImage imageNamed:@"1.png"];
    [imageView addSubview:maskimage];
-(IBAction)done
    NSLog(@"hiafjdkfj");
    UIGraphicsBeginImageContext(imageView.image.size);
    CGRect rect1 = CGRectMake(netTranslation.x,netTranslation.y,maskimage.image.size.width , maskimage.image.size.height);
    CGRect rect = CGRectMake(0, 0, imageView.image.size.width, imageView.image.size.height);
    [imageView.image drawInRect:rect];
    [maskimage.image drawInRect:rect1];
    UIImage *resultingImage = UIGraphicsGetImageFromCurrentImageContext();
    UIGraphicsEndImageContext();
    [editingimage setImage:resultingImage];
    [myview addSubview:editingimage];
    [self.view addSubview:myview];
-(IBAction)back
    [myview removeFromSuperview];
    //[editingimage removeFromSuperview];
-(void) touchesBegan:(NSSet *)touches withEvent:(UIEvent *)event {
    UITouch *touch = [[event allTouches] anyObject];
    CGPoint location = [touch locationInView:touch.view];
    maskimage.center = location;
-(void)touchesMoved:(NSSet *)touches withEvent:(UIEvent *)event {
    [self touchesBegan:touches withEvent:event];
- (void)viewDidUnload
    self.imageView = nil;
    self.maskimage=nil;
    self.takePictureButton = nil;
    self.selectFromCameraRollButton = nil;
    [super viewDidUnload];
    // Release any retained subviews of the main view.
    // e.g. self.myOutlet = nil;
- (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceO rientation
    // Return YES for supported orientations
    return (interfaceOrientation == UIInterfaceOrientationPortrait);
- (void)dealloc {
    [imageView release];
    [images release];
    [takePictureButton release];
    [selectFromCameraRollButton release];
    [super dealloc];
@end
but i can not put the hair to the proper place means on edit image when am saving the image please help meee

How can change the home page to iExplorer with scripts from all profiles

iMac PPC Mac OS X (10.4.8) G5 Tower PPC, G4
iMac PPC Mac OS X (10.4.8) G5 Tower PPC, G4

Set up a realm for your entire webserver/documents directory or for your index page.

How to change the default port of webdispatcher

Hello Everyone,
We wish to know to how to change the default port of SAP webpatcher port from 81$$ to 80.
Appreciate your response.
Thanks,
Vadi

Hello Vadi
you have to change the PORT value in your profile parameter from 81$$ to 80
icm/server_port_0 = PROT=HTTP,PORT=81$$ to
icm/server_port_0 = PROT=HTTP,PORT=80
Also, in SMICM, then change http service port and activate it and above parameter will require SAP restart
$$ is used generally to accomodate multiple port services running in SMICM and so as to avoid the parameter setting according to instance number of any system.
thanks
Bhudev

How to change the Icon for a JFileChooser ?

Has anyone figured out how to change the icon for an instance of JFileChooser from the coffee cup to something else?
I'm on 1.4
Thanks,
Ken

Never mind. I figured it out.
You have to use an instance of JFrame in the call to showXxxxDialog(Component c). Set the icon of the JFrame to what you want the JFileChooser's icon to be.

How to change the transaction isolation level of a CMP?

How to change the transaction isolation level of a CMP from SUN's Deployment Tool? So far I can't find any entry for this setting.

Anuradha W wrote:
That means, currently the only way tospecify the transaction level is through
weblogic-ejb-jar.xml deployment descriptor?
for WLS-generated code, yes.Somewhat related to this question, we have written a standalone testcase to reproduce this issue we have been having. Basically, the issue is that even though we configure the isolation level to a non-default one in the deployment descriptor, the connections returned by the datasource seem to be having the default (which is Read Committed). The DBMS is DB2.
weblogic-ejb-jar.xml has the following set:
<isolation-level>TransactionRepeatableRead</isolation-level>
And we printed the isolation level of the connection returned from a method in the EJB, but the isolation level is still the default. I can share the code to reproduce the problem if you want to take a look at it. Please let me know how I can get that across to you.
Thanks,
AnuradhaIf you are using our JDBC driver for DB2, or can switch to it,
just for a test, there is some debug I'd like from you.
Joe

How do I change the URL to the Remote Web Access server in Windows Server 2012?

Hallo!
I have set up a Remote Dexktop Service using the "Quick" deployment method in Server Manager and everything is working greate internally, but I cannot start an app published in Remote Web Access from outside our network.
The problem is that it wants to start the using the internal URL, for example, server.domain.local, instead of the external one, for example remote.server.com.
I therefore want to know how I can change the default URL for the Remote Web Access server and all the Remote Web Apps in Windows Server 2012?
I have allready looked in Server Manager and I can change some of the deployment settings in server manager, but there is no way to alter the URL of the Remote Web Access server. See below images:
Pressing the internal URL only results in opening the internal URL.
This was very simple to do in Windows Server 2008 R2 using the tsconfig tool, but it does not seam to be any way of solving this in server manager.
A possible sollution would be to alter the registry someware in HKLM->Software->Microsoft->Windows NT->Terminal Services. But this can easaly lead to problems due to wrong format, etc. and is probably not supported.
Is there a simpler and supported way?

That option can be used to connect to any machine that you want. The error message indicates that the client machine cannot resolve the name "server.domain.local" to an IP address that it can connect to.
You have several options for configuring that tab on the RDweb site. You can even remove it entirely.
Customization of RD Web Site
RD Web provides a number of customization options for the RD Web interface, including the ability to control default Gateway server settings and redirection settings. These settings
are controlled by editing the web.config file located in %SYSTEMROOT%\Web\RDWeb\Pages.
Displaying Local Help
To display local help for users instead of the web-based help, edit the LocalHelp value and change the value from false to true.

<add key="LocalHelp" value="false" />
When this value is changed, a user that clicks on Help in the upper right corner of the RD Web login page will open the local help file instead of web-based help.
Hiding the Connect to a Remote PC Tab
The RDWeb page
Connect to a Remote PC tab can be hidden from users to prevent connections to any servers through RD Web other than the servers configured in a collection. By default, this setting is set to true and the
Remote Desktops tab is displayed. To hide the tab, set the value to false.

<add key="ShowDesktops" value="true" />
When the value is set to false, a user will not see the Connect to a Remote PC tab when logged on to the RD Web page
RD Gateway Settings
If the Connect to a Remote PC tab is enabled, an administrator can configure RD Web to use a Gateway server when connecting to remote computers. To specify a gateway, edit the below
value with the name of the RD Gateway server:

<add key="DefaultTSGateway" value="" />
The default authentication method for the RD Gateway server can also be configured by editing the following section of the web.config:

<add key="GatewayCredentialsSource" value="0" />
Devices and Resources
By default, only Printers and Clipboard are redirected on connections made using the Connect to a Remote PC tab. If the user clicks the
Options << button, the redirection settings for a specific connection can be modified
To configure each specified redirection option to be enabled or disabled by default, edit the following section in the web.config file:

<add key="xPrinterRedirection" value="true" />
<add key="xClipboard" value="true" />
<add key="xDriveRedirection" value="false" />
<add key="xPnPRedirection" value="false" />
<add key="xPortRedirection" value="false" />
LAN Experience Defaults
Windows Server 2012 RD Web Access can display a new user selectable option for optimizing the connection for a LAN experience. This option is displayed at the bottom of the RD Web
page and can be controlled by the administrator using the following section of the web.config file:

<add key="ShowOptimizeExperience" value="false" />
<add key="OptimizeExperienceState" value="false" />
This value is set to false by default, but when changed to true, the following checkbox will display at the bottom of the webpage. The LAN experience
checkbox can also be set as enabled by default.
Each setting can also be modified using the IIS Manager user interface:
Don Geddes - SR Support Escalation Engineer - Remote Desktop Services - Printing and Imaging

How to change the QueryRowSet in early access 2?

hi everybody,
I do know how to change the query but I want to add a condition on a variable got from a text field, and use by button action.
I don't know where to initialize this variable exactly?
provided that the query is created in the session bean.
please, reply as soon as possible.
thanx.

Hi,
The tutorials under the section Access Databases will answer your question. In particular the tutorial "Using Databound Components to Access Databases". These tutorials can be found at:
http://developers.sun.com/prodtech/javatools/jscreator/ea/jsc2/learning/tutorials/index.html
Please post any further Creator 2 EA 2 related queries at:
https://feedbackprograms.sun.com/login.html
Cheers
Giri

How to change the look and feel for Heading of quick launch menu in project server 2010

Hi
can someone tell me how to change the look and feel of Header names in quick launch.
I want the header to be displayed in Bold with Underline to it.
could this be possible for just header in quick launch in project server 2010.

Hi Rohan
It does not work this way. You have to use a content editor webpart.
See references below that might help you starting with this customisation:
Http://go4answers.webhost4life.com/Example/sharepoint-2010-quick-launch-look-feel-78379.aspx
Http://m.sharepointpromag.com/sharepoint/four-ways-add-or-remove-quick-launch-menu-control
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

How to change the web server??

How to change the web server in the details of the mobile application component in the MI webconsole??

hello irene,
had your tried checking on the "Use IP instead of host
name" checkbox?
to edit your registered application info, go to
"Upload Mobile Component" tab and click on the Edit icon
on the left part of the record list which corresponds to
the application you had just uploaded.
your application is uploaded to the same host as your
web console application is running on. if you like to
point it to a different server where you have your
archive accessible, you have to change your mcd
deployment attributes on your middleware. try the ff:
1)run tcode: mi_mcd
2)click on Create Mobile Component
3)Enter Mobile Solution Name and Version
4)Click on Display MCD
5)Select Deployment Tab
6)Click on Edit
7)Change the values of WEBSERVER and WEBPATH location eg.
if your archive is located at
http://myotherserver:80/archive/myapplication.war
your entry will be:
WEBSERVER: http://myotherserver:80
WEBPATH: /archive/myapplication.war
where you myotherserver is the name of your http host
server and myapplication.war is the name of your archive.
the archive directory is just a virtual directory where
your application archive is.
you might need to change the port number depending on
your http server port.
regards
jo

HT1918 Created an apple I'd using a wrong e-mail address. Can't access the e-mail to varify the Apple ID in order to be able to change the account settings. Any idea how can change the account information without having to varify the account through the e

Created an apple I'd using a wrong e-mail address. Can't access the e-mail to varify the Apple ID in order to be able to change the account settings. Any idea how can change the account information without having to varify the account through the e-mail?

You are trying to find a loophole to circumvent a basic rule that prohibits the transfer of purchased content from one Apple ID to another.
Content tied to an Apple ID are bound to that Apple ID forever. You can not merge or trade accounts. Well, not (officially) anyway...

How to change the Oracle Server Hostname

Good Day every one,
Am working on Oracle Application 12.1.3
And Database 11.2.0.3
And OS RedHat linux 6.1
I want to change the Server host name how can I do this in simple steps ?
Is there is any pad impact on my server or application ?
Regards

Please also see:
How to change the hostname and/or port of the Database Tier using AutoConfig (Doc ID 338003.1)
How to change the hostname of an Applications Tier using AutoConfig (Doc ID 341322.1)
Or, use Rapid Clone.
Rapid Clone Documentation Resources For Release 11i and 12 (Doc ID 799735.1)
Cloning Oracle Applications Release 12 with Rapid Clone (Doc ID 406982.1)
Thanks,
Hussein

How to change the CORE-id/ Access server audit time from GMT to local

Similar Messages

Maybe you are looking for