How to change the fonts of in the EP input field?

We have a requirement to be able to change the fonts
of the user typed letters in the EP7 input fields.
We explored the entire configuration area but did not see
anything helpful.
Could anyone advise? Thanks! Points guaranteed.

Thanks!
However the input field is on the transaction iView, i.e. the input field
from the R/3 backend.
If we can enlarge above input fields, it's also acceptable.
Any idea? Regards.

Similar Messages

Outbound Plain HTML Adapter how to change the html-header field "host"?

Hello,
I'm using XI 3.0 SP11 and want to transmit a message to a business partner using the Plain HTML Adapter.
My problem is now that I need to change the default Html-Header field "host" because it seems that the adapter engine is converting it to lower case and is attaching the port-number which is causing trouble with the loadbalancer/applicationserver of our business partner.
I tried to set the appropriate http-header value in the communication channel configuration, but the adapter engine is ignoring this value.
Thanks in advance for any ideas.
Sascha Fuchs
Message was edited by: Sascha Fuchs

Hi Sascha,
unfortunately the Plain HTTP adapter is not running in the J2EE, therefore you cannot extend the functionality with an adapter module.
I am not sure to understand the problem right. Why do you need to change the HTTP header? What is in it in your case and what should be?
Regards
Stefan

Re:How to change the RBKP-BKTXT field after MIRO invoice is saved

Hi ALL
i forgot to fill doc header text for several invoices. Is there any way to edit RBKP-BKTXT field.
Thanks
Steve

Daer Anup,
Check the below link where you can capture the current transaction in MIRO.
http://forums.sdn.sap.com/thread.jspa?threadID=1416227&tstart=0
CONSTANTS: c_vorgang(23) TYPE c VALUE '(SAPLMR1M)RM08M-VORGANG'.
FIELD-SYMBOLS: <fs_vorgang> TYPE ANY.
ASSIGN (c_vorgang) TO <fs_vorgang>.
CASE <fs_vorgang>.
WHEN '1'.
WHEN '3'.
WHEN OTHERS.
ENDCASE.
Based on the value of field symbol you can differentiate.
Thanks to Pablo who has given this solution in the above mentioned thread.
The BADI you can use is INVOICE_UPDATE and method AT SAVE .
Regards,
Deepak.

How to change the argument input in a jnlp file?

A question associated with the following few lines of jnlp codes:
<application-desc main-class="Main">
<argument>arg</argument>
</application-desc>
My question is: "How can 'arg' be changed dynamically?
Thanks for help.

Thank Dietz for help.
I tried the following jsp code. But it can launch the application only when "test2.jnlp" file exists. "argument to change" can't be passed to the application.
Thanks.
<% response.setContentType("application/x-java-jnlp-file");
out.println("<?xml version=\"1.0\" encoding=\"utf-8\"?>");
out.println("<jnlp ");
out.println("spec=\"1.0+\" ");
out.println("codebase=\"http://tang:8080/examples/rtla/\"");
out.println("href=\"test2.jnlp\">");
out.println("<information> ");
out.println("<title>RTLAFrame viewer</title> ");
out.println("<vendor>XXX, Inc.</vendor> ");
out.println("<description>RTLAviewer Application Demo</description>");
out.println("<description kind=\"short\">A viewer.</description> ");
out.println("<offline-allowed/> ");
out.println("</information> ");
out.println("<security> ");
out.println("<all-permissions/>");
out.println("</security> ");
out.println("<resources> ");
out.println("<j2se version=\"1.3+\"/>");
out.println("<jar href=\"test.jar\"/> ");
out.println("</resources> ");
out.println("<application-desc main-class=\"RTLAFrame\">");
out.println("<argument>argument to change</argument>");
out.println("</application-desc> ");
out.println("</jnlp> ");
%>

How to change the select-options fields length to long

Dear friends:
   I had develop a program for sent email,and it have a field for fill mail address as below:
   data: lmail like adr6-smtp_addr.
   select-options: mailadd for lmail no intervals.
   my customer complain that the field is too short,but I can not change it to longer,the select-options component limit the visible length , how can i do for this problem!

Dear All:
I had realized this function.
I defined a parameter and a pushbutton to replace the select-option componet,
the code share as below.
data: lmail like adr6-smtp_addr.
SELECTION-SCREEN BEGIN OF LINE.
parameters: mailCopy like lmail.
selection-screen:pushbutton 64(5) pubu user-command mailButt.
SELECTION-SCREEN END OF LINE.
select-options: mailadd for lmail NO INTERVALS no-display.
at selection-screen output.
CLEAR l_count.
DESCRIBE TABLE mailadd LINES l_count.
IF l_count > 1.
    write ICON_DISPLAY_MORE as icon to pubu.
ELSE.
    write ICON_ENTER_MORE as icon to pubu.
ENDIF.
at selection-screen.
CLEAR l_count.
DESCRIBE TABLE mailadd LINES l_count.
IF NOT mailCopy IS INITIAL AND mailadd[] IS INITIAL.
    MailAdd-low = mailCopy.
    Append mailadd.
ENDIF.
IF l_count = 1 and mailCopy IS INITIAL.
    refresh mailadd.
    clear mailadd.
endif.
if sy-ucomm = 'MAILBUTT'.
    perform show_box.
endif.
*       FORM show_box                                                 *
FORM show_box.
TYPE-POOLS aqadh .
DATA: tab_and_field TYPE rstabfield.
tab_and_field-tablename = 'ADR6'.
tab_and_field-fieldname = 'SMTP_ADDR'.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
       EXPORTING
            TEXT           = 'SET E-Mail To '
            tab_and_field = tab_and_field
       TABLES
            range          = MAILADD
       EXCEPTIONS
            no_range_tab   = 1
            cancelled      = 2
            internal_error = 3
            OTHERS         = 4.
IF NOT MAILADD[] IS INITIAL.
    READ TABLE MAILADD INDEX 1.
    MAILCopy = MAILADD-LOW.
ELSE.
    CLEAR MAILCopy.
ENDIF.
ENDFORM.

How to change the order of fields when exported to csv

I am using LiveCycle Designer 8 and have created a great form with the correct tab order.
However, when the form is filled in and returned to me, the fields in the CSV file are all over the place. How can I make sure the fields in the CSV file are displayed in the same order as the tab order?

The actual requirment is to re-arrange the elements of the queryoutput node, to look more organised
say for ex.
Seq 1:
c code company name g/l ac g/l ac description
Seq2 :
g/l ac description c code g/l ac company name
Seq 1 way of representation is more organised that Seq2. How can we achieve this re-arranging of ordering in the queryoutputnode.

Report Painter-How to change the order of fields on selectn screen.

I have a custom Report Painter report that has 2 fiscal years 1 current FY and 1 Comparison FY. This also includes 2 sets of periods. I want the period fields to group together by Fiscal Year and Comparison Year. As shown below.
Fiscal Year From Period___
Fiscal Year To Period____
Comparison Year From Period____
Comparison Year To Period____
Instead it displays as follows:
Fiscal Year From Period___
Comparison Year From Period____
Fiscal Year To Period____
Comparison Year To Period____
Any assistance would be greatly appreciated.

I have a custom Report Painter report that has 2 fiscal years 1 current FY and 1 Comparison FY. This also includes 2 sets of periods. I want the period fields to group together by Fiscal Year and Comparison Year. As shown below.
Fiscal Year From Period___
Fiscal Year To Period____
Comparison Year From Period____
Comparison Year To Period____
Instead it displays as follows:
Fiscal Year From Period___
Comparison Year From Period____
Fiscal Year To Period____
Comparison Year To Period____
Any assistance would be greatly appreciated.

How to change the text of a field in organisational assignment.

hi gurus,
how to change the text of field MSTBR (super visor) to a differnt name in info type pa0001.
i have changed the field name in cmod , changed name appears in table.but it is not appearing in the info type screen 0001.
how to resolve this pls help me..

hi,
The Field showing in the infotype 1 is FORPR.
Change the text of this Field in CMOD.
CMOD ->Go to ->tect Enhancements->keywords-> Change ->FORPR
Change the text and check again.
Regards,
Manoj.

How to change the fields order by pushing the TAB button?

Hello.
I have 4 input fields on a screen that i have build.
When i'm running the screen, I can move from one field to
another by the TAB button.
I need to set a different moving order that is performed by the TAB button.
For example: the fields are 1,2,3,4. if I use the TAB button to move from one field to another- the order is 1->2->3->4.
I want it to be 1->3->2->4.
Is it possible??
Thanks, Barak.

Hi Barak Sahar,
a) set the initial cursor at dynpro level
b) set the cursor positions dynamically using codeSET CURSOR[/code]
Here are the online help links I found:
http://help.sap.com/saphelp_470/helpdata/EN/9f/dbac0b35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_470/helpdata/EN/9f/dba47e35c111d1829f0000e829fbfe/frameset.htm
Go through below thread...
How to change the sequence of fields accessed with the tab key on a dynpro;&#56907;
Hope it will solve your problem
<REMOVED BY MODERATOR>
Thanks & Regards
ilesh 24x7
Edited by: Alvaro Tejada Galindo on Dec 25, 2007 9:13 AM

How to change the default window size display font size on Lync 2013 main window?

Hi champs,
Just a simple non-technical question: How to change the default window size display font size on Lync 2013 main window on Windows 7 desktop?
Thanks,

Hi,
Did you mean change the Lync: Change the Default Font and Color of Instant Messages just as Edwin said above?
If not, as I know, there is no natural way to change it.
If yes, on the latest version of Lync 2013 client, there is a new option “IM” on Lync client “Options” list. And you need to change the default Font and Color of IM in the interface of “IM”.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

How to Change the Default Font in Firefox 4 ?

How to Change the Default Font in Firefox 4 , for this >>
http://store2.up-00.com/Mar11/AJG18655.png << ?

Go to properties first: and set before typing anything in as shown here:
http://screencast.com/t/ZTgzOTM3Y
Then right click bring up this menu while inside active field and click on item with arrrow:
http://screencast.com/t/ZTRjMWRkMzk
Now what ever you typed should reflect the new Font setting.
we may be as you say. But then again other people act like whats on the other side.
We do our best. And if we fall short, well we gave it our best shot.
Okay. In the interests of being completely clear:
I have already tried this. Several times. This procedure will change the default for any of the fields that I place by hand. It does not change the default for any of the fields placed by the Wizard. I was unable to find a solution to the problem in any of the manuals, books, or on-line forums, which is why I posted here as a last resort. This leads to two conclusions:
A. Your advice is incorrect
B. There is a problem with my installation of Acrobat
I will assume that A is not the correct conclusion. I will therefore try a re-install of my software to see if this clears up the problem. There have been other issues with other Adobe software on my machine that a re-installed has fixed nicely. Luckily, I don't have to do this at all often.

How to change the default font (Noteworthy) in Preview Annotation Note ?

How to change the default font (Noteworthy) in Preview > Annotation > Note ?
Thanks for any help guys. Noteworthy is horrible, in my view. But this does not matter. I simply do not want to use it, and woudl be fine with having helvetica back as the annotation typeface.
Neither is Preview responding to changes I attempt in the type menu, nor did I find an entry when using “defaults read com.apple.Preview” in the Terminal.
Any idea? Cheers.

Sorry if this doesn't apply in Mountain Lion (no way to look at ML right now), but I see this in Preview under Mavericks:
I click the annotation button (circled in red) and draw a box. I can then change the text to any active font using the drop down menu (circled in green).

How to change the font size and style on run time

dear all
i try to change the font style and font size on runtime. I did the following:
1- i created an item(:font_size) in which i will write the size of the font for the the other item ('customer_name')
2 on the post_change trigger for 'font_size' i write this code
SET_ITEM_PROPERTY('customer_name',FONT_size,(:font_size);
i write 12 then then font size changed , then i write 18 , the size does not change. and when i write any value , no change happens. I do not know why
the second problem is how to change the font style
i made three checkbooks (bold,italic,underline)
on the trugger when_checkbox_checked i write
     IF :BOLD = 'B' THEN
     SET_ITEM_PROPERTY('N_SAMPLE',FONT_STYLE,'BOLD');
     ELSE
SET_ITEM_PROPERTY('N_SAMPLE',FONT_STYLE,'REGULAR');
     END IF;
no change happend at all.
please help

Hi friend,
it's a really really strange tip... May be it's a Forms bug? I've tried with set_item_property..and.. you're right, it doesn't work..
So.. you can try making this:
- create a visual attribute with an specific font size....
- use the
SET_ITEM_INSTANCE_PROPERTY('block.item',CURRENT_RECORD,VISUAL_ATTRIBUTE,'you_visual_attribute');
and call it from psot-change....
It works
Hope it helps,
Jose.

Anyone know how to change the default font for the new pages? Apparently it does not even come up when I search the 'Help' section of Pages. The level of incompetence in this new version seems breathtaking

I cannot find how to change the default font in the new Pages. It does not appear in the Help area when I search for it. I am never sing Helvetica for my standard documents and cannot seem to change it. What am I missing? And why does Pages help not have an easy answer?
dan

You open a blank template and change the font to you liking. Remember to also get all the styles changed with new font. Then Save As Template. Now you have a template with the font you like.

How to change the Size of the font of the JDeveloper IDE

First of all, this question does not concern the code editor.
How to change the font for the editor is clear, well documented in the documentation as well as in many of this forums threads.
My question is how the font of all the IDE components can be increased.
Is some threads I found to change the font size in the ide.properties file.
I tried that solution but it does not bring any solution.
I'm a person with low vision, using a MB Pro with OS X lion just for overall better visibility.
Talking to a lot of people, who have good vision capabilities, it seems that even a lot of people suffer from the fonts which are to small.
So ... is it possible to document clearly where to do what and in what versions of JDeveloper.
I've not yet discovered if any kind of skin settings can be applied ... but this would be great, surely if some kind of predefined bigger fonts would be available.
Currently I'm using version 11.1.2 and 11.1.1.5.
Help would be dearly appreciated.
Greetings,
Jan.

Did you close JDeveloper and re-open again after making the changes in ide.properties?
If changing the ide.properties does not work.
Try this:
Go to 'Tools' Menu and select 'Preferences' Sub menu:
Select ''Code Editor" and select "Fonts"
Set the options for font-size as in screenshot:
http://adfsampleapplications.googlecode.com/svn/trunk/images/FontChange.png
Thanks,
Navaneeth

How to change the font and colour of the PL/SQL Editor in forms

Hi All,
I am fed of viewing the small fonts in the PL/SQL Editor. I am feeling stress
in my eyes daily...Please any body help me how to change the color and font
of the PL./SQL editor in oracle forms 6i..Thanks in Advance...

Hi
Thanks for the reply..
But I personally feel that Oracle people should have done this since
any editor should allow us to change the font and colour...any way lets
hope that in the future releases that may happen...
Raghu

How to change the fonts of in the EP input field?

Similar Messages

Maybe you are looking for