How to change the internal order type when it has been created?

There is an internal order, when it being created, the user chose the incorrect order type and save it. but the internal order number is useful. so we just want to change the order type or delete the order to release the number.  so can you give me some solutions to solve it. I can not find the way neither change the order type nor delete it.  thanks very much.

You are unable to change the internal order type once an internal order has been created, however you can delete the IO if there haven't been any postings made.
In change mode (tcode KO02), go into the internal order.  Go into the following menu:  Edit > Deletion Flag > Set.    Before you exit the IO, save the master record.
Depending upon your archiving settings, you should then be able to select the menu path:  Edit > Set Deletion Indicator.
If the IO isn't deleted, you can "clobber" it by going into the IMG and deleting the IO using the function "Delete Test Data".  This should only be done by a technical person to ensure that a mass-delete doesn't occur.
Please note that if the IO was an internally assigned number, you might just want to block it and re-use it later.
Hope this helps.
Kylie

Similar Messages

  • How to change the requested delivery date when approval has been done

    Hi
    We use SRM5.0 and we want to implement SC, now we want to make it possible to change the delivery date in the shopping cart when we approve.
    This is needed if we request today but the approver didn't approve same day, therefore the requested day has to move the same number of days, that the approver has spend. Or else the deliver date will not be correct.
    Do any of you know how to do this??
    Best regards
    Jakob

    Hi Jakob,
    What scenario do you use? Classic, Extended Classic, Standalone?
    So depending on your scenario you can have differente types of follow-on documents (PR/PO only in ERP in case of Classic, or PO in SRMand ERP in case of Extended Classic).
    Do you use Sourcing Cockpit?
    I've tested this scenario in SRM 7.0 Standalone and if the follow-on document (in my case, a PO) is not "Ordered" yet then I can change the SC. But if it is already "Ordered", I can't change the SC. This is standard behavior.
    You could use Sourcing Cocking to solve this issue, in this you don't use it yet.
    Best regards,
    Christian Zeuch

  • How to change the tabbing order of an array of clusters?

    How to change the tabbing order of an array of clusters?  I have the cluster arranged in table in the front panel.   The cluster element goes horizontal and array element goes vertically.   When I press the tab key, the cursor goes to the next array element instead of the next cluster item (down instead across).
    Solved!
    Go to Solution.

    Broken Arrow wrote:
    Harold asked a perfectly reasonable and necessary question, but how is that a Solution ???
    I believe it is called the Socratic Method.
    Sea-Story time
    I had the privledge of working for Ron Davis when he managed the Allegheny District of DEC. He was an ex-WO4 (Highest possilbe rank for non-commisioned officer in US Navy, required act of congress to confirm).
    Ron never answered any question I ever saw presented to him. I remember a group of managers in a frenzy over some issue  running to him to to see what he thought. He asked them a series of questions that lead them to the solution and soon they were smiling and slapping each other on the back as they walked away.
    Who is that has a signature that read "it is the questions that guide us"?
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • How to identify which Internal order type is relevant for Budget manager

    Hi,
        How to identify which Internal order type is relevant for Budgeting i.e Budget Manager.
    regards,
    Rajesh

    controlling-internal orders-budegeting and availability control -define tolerance limits for availabilty control
       in which it is defined whether mail be sent to budget manager against the budget profile(budget profile is assigned to order type).
    controlling-internal orders-budegeting and availability control -define tolerance limits for availabilty control-maintain budget manager
    here budget manager is assigned to  order type
    assign me points if it is useful

  • I have three email accounts and want to know how to change the display order.

    I have three email accounts and want to know how to change the display order.

    Install this add on.
    https://addons.mozilla.org/en-US/thunderbird/addon/manually-sort-folders/?src=search

  • How to change the page order in Microsoft word 2008

    Hi, can you tell me how to change the page order in Microsoft word 2008, thanks

    http://answers.microsoft.com/en-us/mac

  • How to change the font and type in the front panel

    Can you tell me how to change the font and type in the front panel if i want to make it looks more beautiful.
    1110340040

    Hi there,
    You can change the font size and type as shown below:
    - Ee Lim -
    See that button on the left side of this post...
    If you feel my post is helpful, all you need is just (at most) 2 seconds to click that button, to show your appreciation. Thank you~~

  • HT2470 Why does this not explain how to change the sort order?

    Why does this (i.e. support at Apple.com) not explain how to change the sort order? I can "arrange" by Date Modified for example but it won't let me switch to use most recent dates first. Also, what is Apple-speak for arrange versus sort anyway? It seems I used to be able to click on a column heading in finder and get a drop down arrow allowing me to change the sort sequence.

    Arrange roughly translates to "group the items in the folder." Sort is how each group is ordered. If you have arrange set to none, you can sort by anything. However, there is no way in the Arrange/Sort menu to choose the direction. The only way to do that is in the List View, and you must have Arrangement set to None.
    I've submitted an Enhancement Request to allow choosing sort direction from the Arrange/Sort menu, but I haven't ever gotten a response, which is good and bad. Good because they will often respond that they have considered it and don't plan on implementing. Bad in that they've haven't implemented it.

  • How do I unlock my iPod touch when it has been disabled?

    How do I unlock my iPod touch when it has been disabled? My children can't remember the four digit pass code they entered and it is now disabled.

    Recovery mode...
    http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    But... if the Device has been Modified... this will Not necessarily work.

  • Get the rows in the same order in which it has been inserted.

    Hi,
    I have a table with four columns(All varchars)...and there are no primary keys
    i have inserted 15 rows where col1="xyz"
    Now while retrieving the same...i dont get the same in the order i ahve inserted..
    What is the way to get the rows in the same order in which it has been inserted..?
    Regards

    I have a table with four columns(All varchars)...and
    there are no primary keys
    i have inserted 15 rows where col1="xyz"
    Now while retrieving the same...i dont get the same
    in the order i ahve inserted..
    What is the way to get the rows in the same order in
    which it has been inserted..?
    RegardsWhy? What is your business case behind this?
    In my experience an "order by" is used way too much without any real need to do it. Are your users interested to know in what order a few records from two years ago have been inserted? What about updates since that time?

  • Can we change customer account name once a quote has been created ?

    Can we change customer account name once a quote has been created ? Currently the customer account number becomes read only when the quote header has been created. This is true for both Forms Quoting and HTML Quoting.

    Presently the feature of changing customer name for Quote is not supported.

  • Sale orders for which invoice has been created

    is there any table in sd module from which we can find out the list of all sales order for which invoice has been created.

    Hi
    Kindly Table VBFA.It is sales document flow table containing data from the begining of sales order till the invoice.
    VBTYP_N = 'M'  invoice
    Thanks
    Subha

  • How can I save a file in CS5 that has been created by a newer version?

    How can I save a file in CS5 that has been created by a newer version?

    Elaborate on what you are going to do.
    Provide details.

  • How to change the manual condition type value in change sales order BAPI

    Hi All,
    My scenario here is, i want to either add/change the manual condition type value during change of SO.
    When i'm trying to pass the  order_conditions_in and  order_conditions_inx tables in  'BAPI_SALESORDER_CHANGE'.
    Condition type is coming at item level but the value is setting to zero. Pls. help if anyone has any idea how to handle this.

    Siva,
       I guess you posted in Wrong Thread. You need to post in WAS section.
       check for any BAPI's available in CRM.
    Nagesh Ganisetti.

  • How to change the fields order by pushing the TAB button?

    Hello.
    I have 4 input fields on a screen that i have build.
    When i'm running the screen, I can move from one field to
    another by the TAB button.
    I need to set a different moving order that is performed by the TAB button.
    For example: the fields are 1,2,3,4. if I use the TAB button to move from one field to another- the order is 1->2->3->4.
    I want it to be 1->3->2->4.
    Is it possible??
    Thanks, Barak.

    Hi Barak Sahar,
    a) set the initial cursor at dynpro level
    b) set the cursor positions dynamically using codeSET CURSOR[/code]
    Here are the online help links I found:
    http://help.sap.com/saphelp_470/helpdata/EN/9f/dbac0b35c111d1829f0000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_470/helpdata/EN/9f/dba47e35c111d1829f0000e829fbfe/frameset.htm
    Go through below thread...
    How to change the sequence of fields accessed with the tab key on a dynpro;�
    Hope it will solve your problem
    <REMOVED BY MODERATOR>
    Thanks & Regards
    ilesh 24x7
    Edited by: Alvaro Tejada Galindo on Dec 25, 2007 9:13 AM

Maybe you are looking for

  • How to pop new window in running main window

    i have to popup a sub windopw in main window....and i need to plot common data to be printed on front panal... i am usind daq ...can i share same daq in main and sub window...hao??or can i share some calculated value in main and sub window of labview

  • Looking for test demo of new 21/27 iMac in-house in Carmel, IN

    Hi all. I am looking for someone that might be willing to let my parents see and use their 21"/27" iMac at there house for a little while. They absolutely DETEST the new glossy screens, at least how they look when they are the store. But their house

  • Previewing site design in other browsers.

    How does one go about previewing  the site design in other browsers as one is working / building it?. ie. Is the Muse Browser the best and only way with out full publishing or uploading the site?

  • I can't transfer my SMS from Iphone 4 to Iphone 4S?

    Hi, I can't transfer my SMS from Iphone 4 to Iphone 4S, how do I go about it. I have restore alot of times but I still can't restore my SMS. Is my mac or itune having problem? Pls help Thanks!

  • Restricting Length of Output in Smartforms

    Hi All, I am trying to restrict the lenght of an output to just show nine numbers, decimal point and then two numbers. I have tried &GV_VAL(9.2)& but I am getting an error back. Is there anyway I can do this?? Many thanks, Points awarded, Colm