How to change the limitation of Table name's length?
The length of table's name or field's name is limited to 30 characters.
Can I change it? If I want to create a long name table,then how can I do?
Thanks in advance!
This is a duplicate of another question
How to change Table name's length?
The short answer is no, you cannot.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC
Similar Messages
-
LabWindows / CVI: how to change the output executable file name
For example, I have an A project a.prj, I do not want to compile the output file is a.exe, but b.exe.
I will try to save as a.prj b.prj, a.cws save as b.cws
eg:a.prj ---->(output)--->b.exe
Solved!
Go to Solution.You can go to Build >> Target Settings menu item, select Release (or Release 64) in the Configuration filed and set the name of the executable to create in Application FIle field, withouyt need to change the prj or cws filename.
See the complete description of available options here.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos? -
How to change the fully qualified host name
Hi,
how can I change the fully qualiied host name?
Regards
MarcHi Michal,
I'm doing the FlightSeatAvailabilityCheck-Scenarion of the demo example and get an error. To get more details about the error I had a look in the XI Runtime Workbench. There I can see, that the wrong url is called (without the hostname) and that the access is forbidden (403). Therefore I want to change the fully qualified host name. I knew that I have to change icm/host_name_full but I don't know where I can do it (which transaction)?
Regards
Marc -
How-To Find the R/3 Table Name for a BW Data Source
Hi there,
Please advice how can I find the respective table name in R/3 for a particular BW DataSource ?
P/S : I would like a technical how-to instead of referring the table names at HELP.SAP.COM
For instance, for my Standard Business Content Info Cube 0CCA_C03(CO-OM-CCA: Statistical Key Figures) which extracts from BW Data Source: 0CO_OM_CCA_4
My question is, how can I find out which specific tables in SAP R/3 is this Data Source pulling the data from ?Hi Dinesh,
Data Source: 0CO_OM_CCA_4
1) In my R/3, I ran SE16 : Table -> ROOSOURCE
2) OLTPSOURCE -> 0CO_OM_CCA_4
3) EXMETHOD = F1
(Hence, I assume the Extraction Method is a Function Module)
4) So, Function Module = BWOM_RS_GET_CTRSTA
5) Run SE37 in R/3
How do I find out the specific tables in this Function Module ?
Would you please list them for me, so I can further refer to the individual tables ? -
How to change the column header/channel name in an LVM file?
Hi all,
I made a VI (see attached JPG) that reads 2 voltages, but after calculations and other processes, ends up writing 6 columns of data to an LVM file (7 if you count the time).
I have read in other posts that you can change the name of each signal so that the header of each column in the LVM files doesn't just say "untitled". However, as you see in my code, some signals are numeric (double) and one is a logic (1 or 0), so there is no way to edit the waveform properties of those signals (since they are not waveforms).
Any ideas?
Thanks!
Attachments:
untitled3.JPG 40 KBI would suggest looking at this existing post:
http://forums.ni.com/ni/board/message?board.id=170&message.id=175554
I'll further mention that in the loop, for each channel you want to set the name of, the attribute name for the name of the channel is "NI_ChannelName". The example in the thread above takes advantage of the fact that "NI_ChannelName" happens to be the first one defined. I think it would be more robust to not bother reading the existing attributes, and instead just write the "NI_ChannelName" attribute with whatever new value you want. -
How to change the limitations of columns?
Here's a screenshot of what I mean:
http://img408.imageshack.us/my.php?image=sarake0al.jpg
This is an album column. The album's name is "The Cream of Female Vocal Trance". iTunes cuts of the name after 30 marks.
Is it possible to change this, so iTunes wouldn't cut these lines after 30 marks?I have iTunes 5.0.1.4
I tried to manually type the album name and now it shows it correctly.
On the other program (Foobar) the names are shown correctly, over 30 marks. When I changed to iTunes it limits the number of marks in every column to 30. So could the problem be in the ID3 version or somewhere?
I won't start to change thousands of songs informations, if they are shown correctly on another program -
How to change the Admin's short name?
I just got my Powerbook G4 back from repair and when they loaded on OSX they made the short name just "a." Not that it is a very big deal but I get frusterated when in the finder it says "a's computer" I really wish I could change my short name for the admin but I'm not sure if i can without reinstalling OSX.
Michael Conniff's link will show how difficult it is to change your short name. Here is a further discussion and an AppleScript to help:
http://homepage.mac.com/frakes/MOSXPT/content/shortusername.html
However, when the system refers to "a's computer" that is not the short name. It is the Computer Name, to be used if you are on a local network. This can easily be changed in System Preferences > Sharing. -
How to change the order of albums iOS 8?
I recently upgraded from an iPhone 5 to a 6 Plus. Everything is fine except for the fact that some of my music is in the wrong order. There are some groups that released multiple albums in the same year, and I would like them to be in the order of when they were released. On my 5 I was able to put them in the right order by going on a computer, changing the sorting, then update iTunes Match to have it change on my phone as well. (example; group came out with album "1" and "2" same year and it defaults to "2" first, then "1." I was able to change it on the iPhone 5 to be in the right order by changing how they are sorted from my computer but that doesn't work on the 6 Plus.) I would like to order it where it goes top to bottom, with the newest on top going down. How would I do this?
ThanksHi Jason,
How to change the order of tables within sheets
Make a table active by clicking in it once to select that table, then drag it by the 'bullseye' (top left, I have placed a red circle to show the bullseye):
After dragging the table down:
Table 1 is now below Table 2.
The blue line is an Alignment Guide
Two types of Guide:
1. Menu > View >Show Rulers. Drag Alignment Guides from a ruler to where you want them.
2. Menu > Numbers > Preferences > Rulers > Alignment Guides. Turn on (tick) both guides. That allows you to align objects with *each other* (as well as with the ruler guides). These guides help to align objects left, middle, right, top, bottom.
Alignment Guides do not show unless you are moving an object.
to drag/move table to another sheet in the one file
Not possible in Numbers 3. The Sheets Pane has gone. Instead, select the entire table (click once in the table to make it active, then click on the bullseye). Copy (or Cut if you are brave). Go to another Sheet and Paste.
Also can you change the size of sheet tab width on tab toolbar, so I can see more sheets at once??
No. Let's hope this will be added in future updates. However, you can drag a Sheet tab left or right to reorder them.
Another tip: each Sheet tab shows the contents of that Sheet, with some options such as Duplicate and Delete:
Regards,
Ian. -
Changing the pricing condition table
Hi Gurus,
As there is a shortage free tables I want to change the existing condtion table and to add new field to fulfill the requirement.Currently we have the table sales area/PH1-PH6 and I need to change it to sales area/PH1-PH6/material group2.While i am trying to change in V/04 system is not allowing and its showing the following messages "Carry out repairs in non-original system only if they are urgen" andt "function code not allowed". Please let me know how to change the existing condition table.
Regards,
Hari CHalla.Hi
I think you need to get the acces key to change the standard table from SAP in service market place.
Regards
Yatin Thakkar -
How to change the "name of column" property of an text item in runtime?
How to change the "name of column" property of an text item in runtime?
I look the properties of items in help and found nothing about this!
It's possible?Hi,
an other solution is change the block property QUERY_DATA_SOURCE_TYPE from "Table" to "Sub-query" , than change at run time the property QUERY_DATA_SOURCE_NAME.
First create block and add items
The QUERY_DATA_SOURCE_NAME will be for ex. "Select 'A' as col1, 'B' AS col2, 'C' as col3 from dual"
Set into items the column name property to col1 , col2 ...
At run time change the query to "Select 'Z' as col1, 'X' as col2 , 'Y' as col3 from dual"
in this way you can change the source of column value.
Caution because if you change value type from varchar2 to date you must cast date into varchar2.
May be that this way is valid only for view data not for insert-update, i don't remember.
bye
Message was edited by:
Killernero -
How to change the Field Symbol, so Adobe Forms takes it as a Table?
Hi guys,
I created an Field Symbol, in a Interface which I use for Adobe Forms. The type of the Field Symbol is STANDARD TABLE, and this field symbol I fill with data from another program.
But the problem is that in adobe forms, this Field Symbol is taken as TEXT FIELD and not as Table... and this shows me a Dump because it can't convert Internal Table to type C (the dump is like that).
What I need, is how to change the Field Symbol, so Adobe Forms takes it as a Table?
I looked at Adobe Form, and found this:
The Type Category of the Field Symbol is DICTIONARY TYPE and I think I need to change it to Internal Table as shown in the right picture.
Does someone have any idea?Hello Taly,
To what i understand your requirement, you need to pass data from Field symbol to internal table in Adobe form.
You have done it correct partially. I have replicated your scenario and steps are below -
1) Create a Z structure
2) Create Z Table Type
3) Create Adobe Interface with Table & Field Symbol. Also do coding as shown to assign the internal table populated in driver program to filed symbol.
4) Design Form as -
5) Code driver as -
*& Report ZR_AF_FS_1
REPORT zr_af_fs_1.
DATA: fm_name TYPE rs38l_fnam,
fp_docparams TYPE sfpdocparams,
fp_outputparams TYPE sfpoutputparams,
it_kna1 TYPE ztt_fs_1.
* Sets the output parameters and opens the spool job
CALL FUNCTION 'FP_JOB_OPEN' "& Form Processing: Call Form
CHANGING
ie_outputparams = fp_outputparams
EXCEPTIONS
cancel = 1
usage_error = 2
system_error = 3
internal_error = 4
OTHERS = 5.
IF sy-subrc <> 0.
* <error handling>
ENDIF.
*&---- Get the name of the generated function module
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME' "& Form Processing Generation
EXPORTING
i_name = 'ZAF_FS_1'
IMPORTING
e_funcname = fm_name.
IF sy-subrc <> 0.
* <error handling>
ENDIF.
*-- Fetch the Data and store it in the Internal Table
SELECT kunnr name1 name2 adrnr FROM kna1 INTO TABLE it_kna1 UP TO 15 ROWS.
* Language and country setting (here US as an example)
fp_docparams-langu = 'E'.
fp_docparams-country = 'US'.
*&--- Call the generated function module
CALL FUNCTION fm_name
EXPORTING
/1bcdwb/docparams = fp_docparams
it_data = it_kna1
* IMPORTING
* /1BCDWB/FORMOUTPUT =
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3.
IF sy-subrc <> 0.
* <error handling>
ENDIF.
*&---- Close the spool job
CALL FUNCTION 'FP_JOB_CLOSE'
* IMPORTING
* E_RESULT =
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
* <error handling>
ENDIF.
6) Output -
BR. -
How to change the domain in zee table
hi
how to change the domain in zee table
the domain is activated , i want to change the length.
can anyone help meGo to SE11.
Give the name of the z-table. Click change.
double click on the data element name and over there again double click on the domain name. So you are in the domain.
There change the length of the domain as per your requirement. -
How to change the tooltip names for my navbar
Hi,
Does anyone know how to change the tooltop names on the navbar as i need it to say "Next" instead of "Forward"
Thank guysFor SWF you'll need to edit the applicable playbar.fla
C:\Program Files\Adobe\Adobe Captivate 7 x64\Templates\PlaybackFLA\AS3\
In the Localization MovieClip:
var pbcBtnTips_ENU:Array = new Array("Rewind ",
"Back ",
"Play ",
"Pause ",
"Forward ",
"Closed Captioning ",
"Audio On ",
"Audio Off ",
"Exit ",
"Information ",
"dummy for scratch bar ",
"Table of Contents ",
"2x Fast Forward Speed ",
"4x Fast Forward Speed ",
"Normal Speed ",
"Print");
For HTML 5 you'll need to edit the playbarScript.js file:
C:\Program Files\Adobe\Adobe Captivate 7 x64\Templates\PlaybackFLA\HTML\
cp.playbarTooltips =
AudioOff : 'Audio Off',
AudioOn : 'Audio On',
BackGround : 'BackGround',
Backward : 'Backward',
Color : 'Color',
CC : 'CC',
Exit : 'Exit',
FastForward : '2x Fast Forward Speed',
FastForward1 : '4x Fast Forward Speed',
FastForward2 : 'Normal Speed',
Forward : 'Forward',
Glow : 'Glow',
Height : 'Height',
InnerStroke : 'InnerStroke',
Play : 'Play',
Pause : 'Pause',
Progress : 'Progress',
Rewind : 'Rewind',
Shade : 'Shade',
Stroke : 'Stroke',
Thumb : 'Thumb',
ThumbBase : 'ThumbBase',
TOC : 'TOC' -
How to change the default text title of Detached table/treetable
Hi,
Is anybody know How to change the default text title of Detached table/treetable.
I have already read the post on "http://vtkrishn.com/2010/07/28/how-to-change-the-default-text-title-of-detached-tabletreetable/"
as per this post It will change the title throughout the application.
I wanted to change only for one particular table.
Thanks,
Charu
Edited by: Charu on Sep 13, 2012 4:14 AMHi,
please don't double post and instead continue with your original threat. In the previous post you got the correct answer to use skinning. You did not like the solution as it doesn't allow per-instance titles. I agree with this and a logical consequence is to file an enhancement request instead of re-posting the question. I'll file the ER, so no need to follow up for you anymore
Frank -
How to ... change the default for "patch name" when doing the assemlby?
Hi all,
how to change the default settings for the "patch name" in the assembly step?
By default the name will be set to <trackID>.<timestamp> and I would like to have something else ...
Best regards
and thanks for any help
MichaelI don't think you can - there's nothing in the documentation indicating how you can change the default. I wouldn't be surprised if there was a configuration file somewhere that contained an assembly name template, but altering it (assuming it exists) would certainly be at your own risk.
You could always open an OSS note against BC-CTS-CMS and ask.
Maybe you are looking for
-
I installed a new 1tb WD hardrive in my mid 2009 macbook pro along with upgrading from 4gb to 8 gb. My start up disk is still almost full, booting up is extremely slow, and programs open up by themselves once booted up ex:word, excel. New TB drive sh
-
ITunes won't open automatically after connecting iPhone
Maybe I missed the discussion on this but I did search first. I just bought an iPhone 4s and had already upgraded to iTunes 10.5. iTunes will not open when the iPhone is initially plugged in. I can manually open iTunes and it works fine. 'Open iT
-
How to get paired Auvio wireless speakers to connect and play on 2008 Macbook Pro
How do I get wireless speakers to play after successfully paired in system preferences of 2008 macbook pro? When both turned on they will not connect.
-
Error while mapping UICust & View.......
Hello all, Need ur urgent help!!
-
Hi all, I have a requirement to send IDoc to external system. When there is no corresponding data, IDoc fields are not filling. I need to fill blant value to the IDoc fields and send to external system. I don't have permissions to change the standard