How to change the logon language in module pool program?

Hello All,
I had created a module pool program and had desiged a screen.
When i am logged in English language i am able to see them in english as per the requirement it is working fine.
But the requirement is wen i am logged in DE then the selection-screen texts should show in English and not in German.
Kindly give me a solution for this.
Thanks & Regards,
Rajesh Kumar

Hi Rajesh,
This problem is because you have maintained a standard dictionary fields on selection screen and all the standard dictionary fields are maintained in DE language, on the screen layout, go to the attributes of that particular text field, there is a option MODIFIZ for dictionary fields (it is a drop down), selection F TEXT, now whatever the text u will define, it will remain same for all the languages, once u do this then u again login in DE,l u will see the text maintained by u and not the DE text.
Do reply if problem still persist.
point if useful.
Rohit G
Edited by: Rohit Gaharwar on Aug 11, 2009 1:24 PM
Edited by: Rohit Gaharwar on Aug 11, 2009 1:30 PM
Edited by: Rohit Gaharwar on Aug 11, 2009 1:36 PM
Edited by: Rohit Gaharwar on Aug 11, 2009 1:36 PM
Edited by: Rohit Gaharwar on Aug 11, 2009 1:37 PM
Edited by: Rohit Gaharwar on Aug 11, 2009 1:38 PM

Similar Messages

How to validate the field values in module pool program?

Hi Guys
     I am working with module pool programming.
     Here I want to validate the fields like below.
     with out filling all the fields if I click SAVE option it has to show a message that all fields has to be filled. This can be done by checking all the fields individually.
     I think it can be done through <b>LOOP AT SCREEN ......ENDLOOP</b>. sequence.
     If it is possible, can anyone help me?

You need to write the Module in between the CHAIN and ENDCHAIN statment in SE51
If you send a warning or error message from a module <mod> that you called using a FIELD statement as follows:
CHAIN.
FIELD: <f1>, <f 2>,...
MODULE <mod1>.
FIELD: <g1>, <g 2>,...
MODULE <mod2>.
ENDCHAIN.
all of the fields on the screen that belong to the processing chain (all of the fields listed in the field statements) are made ready for input again. Other fields are not ready for input. Whenever the MODULE statement appears within a processing chain, even if there is only one FIELD attached to it, all of the fields in the chain (not only the affected field) are made ready for input again, allowing the user to enter new values. If the fields in the processing chain are only checked once, the PAI processing continues directly after the FIELD statement, and the preceding modules are not called again.
Look at the DEMO program DEMO_DYNPRO_FIELD_CHAIN.
ashish

How to Change the Font Size in Module Pool Selection Screen?

Hi,
There is a module pool, and I need to change the font size mentioned in the selection screen. Could you plaese tell me, how will I be able to do that?

Hi ,
If you are asking for text field , then check the options avaliable in Display tab of Attributes.
Hope this helps you.

How to pass the field value from module pool program to smartform using submit?

// AT pai of module pool pgm i entered the following: here gv_orderid is my value to be available at smart form(driver pgm) & zmusic_store_smf is the driver program of my smartform.
gv_orderid= wa-itemid./
SUBMIT ZMUSIC_STORE_SMF VIA SELECTION-SCREEN
                              WITH p_order = gv_orderid
                              AND RETURN.
//AT driver pgm(zmusic_store_smf):
START-OF-SELECTION.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      formname                 = 'ZMUSIC_SMARTFORM1'
*   VARIANT                  = ' '
*   DIRECT_CALL              = ' '
   IMPORTING
     fm_name                  = lv_form
   EXCEPTIONS
     no_form                  = 1
     no_function_module       = 2
     OTHERS                   = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION lv_form
   EXPORTING
*      iv_orderid = is_purchase_item-zorder_id.
iv_orderid = gv_orderid.
// here i'm trying to call my smartform('ZMUSIC_SMARTFORM1') from this driver pgm but unable to access the value of gv_orderid please help me out with this.

Declare the gv_orderid in modulepool program.
And Declare the parameter as import parameter in smartform.
CALL FUNCTION lv_form
   EXPORTING
*   ARCHIVE_INDEX              =
*   ARCHIVE_INDEX_TAB          =
*   ARCHIVE_PARAMETERS         =
*   CONTROL_PARAMETERS         =
*   MAIL_APPL_OBJ              =
*   MAIL_RECIPIENT             =
*   MAIL_SENDER                =
*   OUTPUT_OPTIONS             =
*   USER_SETTINGS              = 'X'
   i_input                    = gv_orderid
* IMPORTING
*   DOCUMENT_OUTPUT_INFO       =
*   JOB_OUTPUT_INFO            =
*   JOB_OUTPUT_OPTIONS         =
* EXCEPTIONS
*   FORMATTING_ERROR           = 1
*   INTERNAL_ERROR             = 2
*   SEND_ERROR                 = 3
*   USER_CANCELED              = 4
*   OTHERS                     = 5

How to change the input language ?

Hello,
I am writing an Add-on that needs to change the input language when the user
clicks on the Item Code field ("5") in the "Item Master Data" form.
I can perform the change when I am out side of the SAP application (for example if I create a Windows Form), however I cannot control the input language of the SAP itself through code.
I even tried using Application.Sendkeys, however I was unable to send a combination of ALT+SHIFT, or at least it did not have any affect
Here is the code on how to change the input language on a Windows Form:
For Each Lng As system.Windows.Forms.InputLanguage In system.Windows.Forms.InputLanguage.InstalledInputLanguages
   sValue = Lng.Culture.DisplayName.ToUpper()
   If sValue.StartsWith("ENGLISH") Then
                    system.Windows.Forms.InputLanguage.CurrentInputLanguage = Lng
                    Exit For
    End If
Next
Any ideas ?

I am not sure I understand the problem. Anyway in B1 you change the language by
changing it from the Administration module. This raises a Application event that
is sent to all the add-ons. The event is aet_LanguageChanged and you should
then change the language handled by your add-on when you receive it.

How to change the default language?

How to change the default language of the Ubuntu desktop and of the Firefox program to Norwegian or Danish?

While this isn't the appropriate venue to ask about changing the default language in Ubuntu, the snide forum link above lazily fails to address the Firefox language issue, and unfortunately this link now comes up on the first page of google searches about the default language in firefox.
To change Firefox's default language, go to Edit -> Preferences -> Content, and click the "Choose" button under the Languages heading.
To change the default language of your spell checker, right click on any text area and find the "Languages" entry in the menu, then select the language of your choice.

How to change the default language of form9i?

How to change the default language of form9i? For example, change the language from Spanish to English.
Regards!
Gerald

Hi,
set the NLS_LANG parameter and make sure the language supplement classes got installed when installing the deesigntime or server. If you need to change the language for runtime, set the value in the default.env file - assuming its a web based appication
Frank

How to get the Grand Total in Module pool Screen

Hi Frds.
     How to get the Grand Total in Module pool Screen
Example i have 10 different materials
for each matarial has different moving . But in my case matarials is doesnt matter here
10 material Moving Average price to do Frand total and display in one column...
Please Help me out Frds.
Regards,
Kabil

Hi
You need to calculate the total in a module of PAI (or PBO) event:
PROCESS PAI.
   LOOP.....
   ENDLOOP.
MODULE CALCULATE_TOTAL.
MODULE CALCULATE_TOTAL.
    GRAND_TOTAL = 0.
     LOOP AT ITAB,
        GRAND_TOTAL = GRAND_TOTAL + ITAB-PWB.
    ENDLOOP.
ENDMODULE.
In this way the grand total will be calculated as soon as the user presses enter or another command.
You can't insert the calculation in the loop of table control, because this loop runs the visible lines only, so it's better to calculate the total out of those loop,

How to change the field length in standard sap program.

Hi All,
How to change the field length in standard sap program.
Urgent
Example:
Text1 type c length 75,
To change :
Text1 type c length 150,
Point will be rewarded..
Thank you,
Vikram.C

If the only solution is to change the sap standard program, simply change the program, it will prompt for an access key. This key can be retrieved in the SAP support portal (service.sap.com) at keys and requests, sccr keys, register object.
Sometimes these actions are outsourced to a competence center, so maybe youre not entitled to do this, in any case ask a resident senior developer for support.
regards, Rob

F4 help for the screen fields in module pool program

Hi All,
I have a requirement that, i want to provide F4 help for the 2 fields in module pool program. the fields are document number and fiscal year from rbkp table.
i could provide search help for two fields.
but how to select matching fiscal year for that document number.
problem: i am getting fiscal year as first four digits of document number.
please help me to solve this problem.
Thanks & Regards,
Namratha.V

Hi,
If your requirement is after selecting the document no from f4 help then the corresponding year should be updated in the document year field then use FM --> DYNP_VALUES_UPDATE
In this function module pass the screen no program & field for which u want to update value

How to save Custom control records through module pool program ?

Hi guru ,
1. How to save Custom control records through module pool program ?
I wrote multiple lines of record in custom control
Who to save that records ?
thanking you.
Regards,
Subash.

Hi,
can refer following code -
IN PAI , CODE is as follows-
*&      Form editor_output
FORM editor_output .
NARRATION1 is name of custom controller
IF v_editor IS INITIAL.
Create obejct for custom container
    CREATE OBJECT v_custom_container
      EXPORTING
        container_name              = 'NARRATION1'
      EXCEPTIONS
        cntl_error                  = 1
        cntl_system_error           = 2
        create_error                = 3
        lifetime_error              = 4
        lifetime_dynpro_dynpro_link = 5
        OTHERS                      = 6.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
Create obejct for the TextEditor control
    CREATE OBJECT v_editor
      EXPORTING
        wordwrap_mode              = cl_gui_textedit=>wordwrap_at_fixed_position
        wordwrap_position          = line_length
        wordwrap_to_linebreak_mode = cl_gui_textedit=>true
        parent                     = v_custom_container
      EXCEPTIONS
        error_cntl_create          = 1
        error_cntl_init            = 2
        error_cntl_link            = 3
        error_dp_create            = 4
        gui_type_not_supported     = 5
        OTHERS                     = 6.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
ENDIF.
ENDFORM.                    " editor_output
getting textdata in internal table as follows
*&      Form create_text
FORM create_text .
REFRESH : it_texttable,
            it_text.
IF v_doc_number IS NOT INITIAL.
    IF v_editor IS NOT INITIAL.
      CALL METHOD v_editor->get_text_as_r3table
        IMPORTING
          table                  = it_texttable
        EXCEPTIONS
          error_dp               = 1
          error_cntl_call_method = 2
          error_dp_create        = 3
          potential_data_loss    = 4
          OTHERS                 = 5.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                   WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
Now, our final text data is in internal table it_texttable.
pls, Reward if found helpful.

Is it possible to print the current screen in Module pool program(Dynpro)?

Is it possible to print the current screen in Module pool program(Dynpro)?
I create a Module pool program , and customer hope can print the screen when they click print button, Is it possible?

Does the customer want a screen shot or what? Please elaborate on your requirement.
Maybe you should create a smartform first, which is called when one clicks on print button. But in fact, we need a bit more info than this.

How can change the system language on my S4 to Italian?

I would like to change the system language on my S4 to Italian but that is not an option. In fact, there are only about six choices of language, which is ridiculous for the type of phone. How can I add languages? I know people with the same phone on other carriers that can do this very easily from system settings.

I know Italian is not currently an option. That is the reason for my question. I would like to change the system language to Italian. Any third party apps, as you recommend, require the phone to be rooted and I do not want to do that. Why is it that the same phone on other carriers has a wide selection of languages to choose from but Verizon's version only has six options to choose from? You have the ability to change the keyboard language, which I did, but not the system language.

How to change the UI language to Italian?

I am trying to make a small plugin/script for Italian langauge, It is supposed to work and be used when the system locale is Italian.
Currently, I am doing my development on my WIndows 7 machine, that has locale set as English. How do I change the UI language to Italian or as a matter of fact - chinese/russian and so on, such that I can test/verify my plugin.
Any help would be greatly appreciated - I am stuck with the testing part and not sure how a language change should work.

Ah, yes, CS6 is the odd one out, I had heard that. I haven't change the UI language since CS5 by the looks of it. CS6 does have a field for a language setting:
HKEY_LOCAL_MACHINE\SOFTWARE\Adobe\DefaultLanguage\CS6\AdobeProductLanguage
but changing it doesn't have any effect (not that I can see, anyway). What that key does is a mystery to me. The value I see is en_US, but my CS6 installation is en_GB (which I see in the folder structure).
Peter

How to change the keyboard language by code

I'm building a user interface for my application, some of the fields are in arabic and others are in English, I want to change the keyboard language according to the fields the cursor in, I tried to send KeyEvent once the cursor entered the text field. [[ KeyEvent ev = new KeyEvent(this, KeyEvent.KEY_RELEASED, 1, KeyEvent.ALT_DOWN_MASK, KeyEvent.VK_SHIFT, KeyEvent.CHAR_UNDEFINED,KeyEvent.KEY_LOCATION_RIGHT); ]] but it didn't work! could any body help me please?

Locale is already setted.
Keyboard has toggle button(key) to switch input-mode between english and
native languge(korean). So I'd like to set input-mode per text-field when get focus for user convenient by programing code . But I can't find the toggle key code.
Is there any idea to do this?

How to change the logon language in module pool program?

Similar Messages

Maybe you are looking for