How to change the order of the columns in the Message List in Mail?

In Mail, in the Message List, is it possible to rearrange the column order of Subject, From, Date, Attachments, etc?
The upgrade to Snow Leopard changed the order of the above and I want to keep the old order that I had with Leopard.
Also, there is a column which has a black circle in it. What does it mean? I don't mean the smaller black circle, because that shows which emails been read and which are not yet read.
Thank you.
Lorna

To arrange columns, click on column title (To or From) and drag right or left.
The black dot column shows the type of message. There will be a counterclockwise arrow if the email is a response to a previous email or there will be an icon of a note if the message is a note

Similar Messages

  • How to create Remainder email workflow in share point 2010 designer without creating the remainder date (calculated) column in the list

    Hi,<o:p></o:p>
    I have task to create remainder email notification 3 days before by comparing with End
    date (my list item) so i created one calculated column in the list as remainder date by using that remainder date
    i created, but my project manager told me create same remainder notification work flow without create that remainder date i tried to write calculation in work flow
    but it is not working if any one knows how to do this please help me<o:p></o:p>
    Thanking you,<o:p></o:p>
    ArunDarly <o:p></o:p>

    Hi,
    For reminder type requirements, I tend to use the ‘Information Management Policy’ SPD method as described in
    this blog article by Laura Rogers (it’s for MOSS and WSS but works in SP2010 also).
    This method avoids the use of calculated columns; rather the workflow does the calculation and outputs information into a ‘reminder’ field. Also, I don’t like the idea of ‘paused workflows’, so this method works for me.
    Cheers
    Matt

  • How to change display order

    All,
    I had created a Line chart graph with three measures (Total Employees, Total Promotion and Total Hires) for last 12 months. Chart legend is displaying this order, Total Employees, Total Promotions and Total Hires. But my requirement is , Legend supposed to be display this order, Total Hires, Total Employees and Total Promotions. How to change this order in Graph?

    Hi
    Pull up a Column and click in the fx and there write the below formula
    Case when column Type ="Total Hire' then '1'
    when column Type = 'Total Employee' then '2'
    when column Type ='Total Promotion' then '3'
    else null end
    Then sort the column in asc order and then hide the column
    You will find that the original measure column is sorted as required
    Regards
    Debo
    Edited by: Debo Roy on Sep 8, 2010 8:03 PM
    Edited by: Debo Roy on Sep 8, 2010 8:21 PM

  • How to change purchase order's cost center in batch

    Dear all :
    how to change purchase order's cost center in batch?

    Dear Manish :
    thanks so much for you reply.
    the filed which i wanted to change it's content is cost center (KOSTL) in table EKKN.
    i couldn't find it in this t-code when i select fields.

  • How to change page order in Acrobat Porfolio?

    How to change page order in Acrobat Porfolio? In older versions it use to be much easier to drag and drop the page order. I don't see any menu options on arranging the pag order. Any ideas? Thanks.
    I would post a screenshot but they have been disabled on these forums.

    You should ask in the Reader forum. But my guess is that Reader there is nothing you can do. Acrobat allows you to move pages around, but not Reader.

  • I created an album in iPhoto 11 and I have placed photos in a certain order for her graduation party slideshow. I want to place that album or photos on a thumbdrive, but when I do I lose the order I placed them in the folder.

    I created an album in iPhoto 11 and I have placed photos in a certain order for her graduation party slideshow. I want to place that album or photos on a thumbdrive, but when I do I lose the order I placed them in the folder.  renamed the photos starting with 1 and ending 262. thinking that would save the photos in order. Each time I try to export them that are placed in original folder names and descriptions need help.

    This is a two part process. First we title the photos, then we export them, using the title as filename.
    To title them
    Once you have then in the order you want select them all and go
    Photos -> Batch Change. Select set 'Title' to 'Text'
    Choose a Title -> Graduation 2013 or whatever, then check the box at 'Append number to each photo.
    Now, in the Album all your photos are named... Graduation 001, 002, 003 etc
    Next Export them:
    File -> Export, and in the Name option, choose 'Title as Filename' and complete the export.
    Regards
    TD

  • The number of display columns in the report reached the limit. Help!!!

    Hello Everyone,
    This might be dumb question. But why do get this error with a IR report? and what is the solution for this. Please help me with this.
    Error
    The number of display columns in the report reached the limit. Please click Select Columns under Actions menu to minimize the report display column list.
    Oh.. And also i have a blob column.. if the format is not given, then the table is fine.. but happen to get this error only when the blob download format is given.
    Thanks and regards
    John
    Edited by: JB on Mar 30, 2012 11:08 AM

    Hi,
    i have set up a small test case on apex.oracle.com and I receive the same error if I use download format.
    I have a table
    test_blob (id number, name varchar2(10), blobcont blob)
    If I create IR like
      select
        id,
        name,
        blobcont
      from test_bloband then I define download format I hit the error.
    If you want this to work you have to change your query to
      select
        id,
        name,
        dbms_lob.getlength(blobcont) blobcont
      from test_blobAnd then again define download format for blob on blobcont column.
    Regards,
    Aljaz

  • The number of display columns in the report reached the limit" Interactive Report

    I get the error message of "The number of display columns in the report reached the limit" when trying to display less than 100 (100 is limit) columns when an aggregate has been created.   This does not happen when an aggregate has not been added to the IR report.  It seems to happen because I have a control break on as well.  When I turn off the control break it works but is not the result that we want.  Interesting enough, if I filter the results down to 500 rows it works just fine.  Does oracle treat aggregates as columns!?  This is a really odd issue that I really need to clear up.
    Oracle 11g
    apex 4.1.0.33
    Thanks in advance,
    Shawn.

    Hi,
    i have set up a small test case on apex.oracle.com and I receive the same error if I use download format.
    I have a table
    test_blob (id number, name varchar2(10), blobcont blob)
    If I create IR like
      select
        id,
        name,
        blobcont
      from test_bloband then I define download format I hit the error.
    If you want this to work you have to change your query to
      select
        id,
        name,
        dbms_lob.getlength(blobcont) blobcont
      from test_blobAnd then again define download format for blob on blobcont column.
    Regards,
    Aljaz

  • Restrict the Order no Whe we select the Taxable asset in account assignment

    Hi Gurus,
    In the BADI BBP_DOC_CHANGE_BADI I have implemented a code to populate the default Asset in the et_account table and it is getting reflected in the portal,
    But my issue is the Order no also gets populated based on the default Asset which is happening after the BADI get triggered.
    Please help me how to restrict the Order no getting populated since it is picking up from the table ANLA (R/3), suggest me any BADI to restrict the same.
    Regards
    Paul

    Hi Dave,
    But I need to restrict the Order no getting populated in the portal when we clear the field ET_ACCOUNT-ORDER_NO within the BADI (BBP_DOC_CHANGE_BADI) then also the Order is getting populated in the portal, suggest us any OSS notes or any other way of doing it.
    Regards
    Dhanoo

  • What is the meaning of this column in the pricing  procedure?

    Dear Gurus,
    What is the meaning of this column in the pricing procedure?
    thanks..

    subtotal field : Subtotal field is used to pass the value to some other field in PO .
    for ex: using value 9 you pass the value to field komp-brtwr. so that this can be used in  any other routine in the pricing procedure.
    requirement field: if there is a scenario that condition type should come in pricing on some condition like vendor country is india. in that case use create the requirment and attached this requirement.in this requirment you put logic and set the sy-subrc value 4 or 0.

  • I just bought an ipad 2, it has not arrived but i would like to cancel the order because that was not the one I wanted. Do I get my money back if I make a return?

    I just bought an ipad 2, it has not arrived but i would like to cancel the order because that was not the one I wanted. Do I get my money back if I make a return?

    You will need to talk to Apple, they would be the only ones who can tell you. We are just a user to user forum here.

  • I want to create a book using the photos in the order I have them in the album I created, but book has them all mixed up

    I want to create a book using the photos in the order I have them in the album I created, but book has them all mixed up

    the only reported way is to redo the dates in the album and then start the book since books use date order
    LN

  • How do I change the length of a column in the metadata?

    A very simple package, reads data from SQL Server and FTPs it to a destination. I have zero experience with SSIS.
    I had to add a new column (HEA_ID) to the input and output. The output record has a filler at the end (I hope you know what a filler is) and the new column has to go before the filler and the filler length reduced accordingly.
    Problem: there is no apparent way to place the new column anywhere but after the Filler. The filler in the metadata is the wrong length and there is no way that I can see to change the length.
    There is a yellow exclamation mark on the Flat File destination (where the filler is wrong length)
    I get these erros when I run the updated package.
    "The external metadata column is out of sync with the data source column. The column 'HEA_ID' needs to be updated in the external metadata column collection".
    "The column filler needs to be updated in the external metadata column collection"
    I have no idea how to fix these errors. Help needed.

    Hi AllTheGoodNamesWereTaken,
    According to your description, you add a new column HEA_ID and make some changes in filler column in the External Columns, so those two columns are out of sync with the data source column.
    Please note that columns are created based on the data source columns. So we couldn’t directly change them in the Flat File Destination Advanced Editor.
    To avoid this error message, just as Visakh said, just review mappings once again in the Flat File Destination. If we want to change the columns in the Flat File Destination, we need change the source columns.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • How to change the width of a column in the web templete

    hai
       can anyone pl help me to solve the issue
    here is the issue
        " how to change the width of the column in web templete?" is there any chance  to change
    thanx in advance
    syam

    First use the Active Cell property and set the row value to -2 to change an entire column. The attached image shows how to set the background color of column 3 to green. I don't understand your comment about column size. It doesn't matter how wide or narrow a column is. Using the Cell Background Color property, the entire cell is colored. If you are having difficulty keeping track of the number of columns, thats a different issue.
    Attachments:
    Background_Color_of_Table.jpg ‏5 KB

  • How to change the order of cascading prompt?[The prompt at higher level appears at TOP]

    Hi Guys,
    I have one doubt in cascading prompt without Hierarchy view in UNIVERSE 3.1
    While running a report with it.
    The prompt at higher level appears below the prompt at lower level.How can we change the order,i.e, I want Level 2 Account Code as top and then Level 3 Account Code ?
    It can achieve in hierarchy view,but i don't want to set it as hierarchy view,because there are huge number of Level 2 Account code[Search pattern is not available too]
    Thanks in Advance
    Shenbu

    Hi Sathish,
    Thanks for your reply.
    I created Cascading list of value as you said only.please find below screenshot for your refefrence.
    I think,its tool  limitation as "The prompt at higher level appears below the prompt at lower level in report".Can any other way is there to achieve?

Maybe you are looking for