How to change the status of the system programmatically with Function Module

I Was trying to change the status of the notification through STATUS_CHANGE_INTERN function module . But It is not changing the status of the notification.
Can any one help to understand what is going wrong ... or any other function module to change status of Customer complaint notification ..

Hi KK,
Please can you take clues form the below discussion thread -
http://scn.sap.com/thread/775169
Thanks to all original contributors of this thread!!
NOTE: Please note that the main point explain here is that, if you are willing to change to a status Ex, NOPR, NOCO, etc then you will need to pass on the value 'I0070', 'I0072', etc. I will also go ahead and like to add one more point here to make the language check as well like "EN", 'DE', etc as these statuses are language dependent too.
Thanks,
Arijit

Similar Messages

How to change Vendor text in shopping cart using BADI/Function module

Hi
If any could help me out that i want to change vendor text using BADI/FMs.
Using BADI" bbp_catalog_transfer" i dint find any parameter for vendor text. please let me know if there any idea to resolve the problem

Hi,
you should find the vendor text within the BAdi
BBP_DOC_CHANGE
Method for shopping carts
BBP_SC_CHANGE
Here you could use the Changing Parameter
CT_LONGTEXT
The table contains 2 important fields:
TDID, where you can identify the type of text, in your case this should be ITXT for standard shopping carts (vendor text within positions)
TDLINE: which contains the text
You are now able to change the vendor text directly within this BAdi with standard ABAP methods.
Best regards
Andreas

How to create a new business partner for notification with function module?

Hello,
I got a problem when I want to create a new Notification with its businiss partner (BAPI_ALM_NOTIF_CREATE). I can't find the proper way to create the new business partner. Anyone offer some help?
Thanks a lot!
Morgan

when I look at the function you can transfer the partner in NOTIFPARTNR table.
You must already have defined the appropiate partnerroll in customizing for you're businesspartner
or do you have another problem with this function ?

How can I change the status of the fileupload UI from disable to enable?

Hi, experts,
The Version of my Netweaver studio is 7.0.11.
I create a view with fileupload UI element in WebDynpro for Java application, but the fileupload UI element is disabled so that I don't select file when I click the button in the fileupload UI element after I run the application.
How can I change the status of the fileupload UI element from disable to enable?
Best regards,
tao

Hi
look at this thread [HI Masters , I need information for file upload program in web dynpro java|HI Masters , I need information for file upload program in web dynpro java]
and check if u bind each file upload element to binary property in the context

RE: Mail notification on changing the status of the spport desk messages

Hi,
I am facing problem with the automatic mail notification in service desk configuration.
When i create a support desk message in the satellite system, the message appears in crn_dno_monitor in solution manager. When i change the status of the message from new to in process, i get a mail only with the subject line "MESSAGE IN PROCESS STATUS' and the pdf attachement (sapscript) is missing. I have checked all the configurations in SPPFCADM but i am not able to figure out the problem. Please help me out of this problem.
Regards,
Sowmya

Hi,
there is a SAP Note with a tutor for send_mail via action. See Note 691303 and the attached .zip-file.
It shows step by step how to set it up and is a very good tutorial. You'll need additional (free) software to let it run.
Regards,
Dirk
@Sowmya: what content does the mail have? None? There is a possibility in SolMan where you can choose whether you want the content as a .PDF-Attachment (which, in my eyes, isn't that sparkling) or as regular mail text.
It is located in TA SCOT. Double klick on "SMTP", then klick on "Internet" and there choose in the Drop Down Menu of Sapscript. When you have trouble, look at my [screenshot|http://home.arcor.de/dirk.malas/solman/Mail_TXT_PDF.JPG].

How to change a setting in the Java Control Panel with command line

Hi,
I am trying to figure out how to change a setting in the Java Control Panel with command line or with a script. I want to enable "Use SSL 2.0 compatible ClientHello format"
I can't seem to find any documentation on how to change settings in the Java Control Panel via the command line
Edited by: 897133 on Nov 14, 2011 7:15 AM

OK figured it out. This is for the next person seeking the same solution.
When you click on the Java Control Panel (found in the Control panel) in any version of Windows, it first looks for a System Wide Java Configuration (found here: C:\Windows\Sun\Java\Deployment). At this point you must be wondering why you don't have this folder (C:\Windows\Sun\Java\Deployment) or why its empty. Well, for an enterprise environment, you have to create it and place something in it - it doesn't exist by default. So you'll need a script (I used Autoit) to create the directory structure and place the the two files into it. The two files are "deployment.properties" and "deployment.config".
Example: When you click on the Java Control Panel it first checks to see if this directory exists (C:\Windows\Sun\Java\Deployment) and then checks if there is a "deployment.config". If there is one it opens it and reads it. If it doesn't exist, Java creates user settings found here C:\Users\USERNAME\AppData\LocalLow\Sun\Java\Deployment on Windows 7.
__deployment.config__
It should look like this inside:
*#deployment.config*
*#Mon Nov 14 13:06:38 AST 2011*
*# The First line below specifies if this config is mandatory which is simple enough*
*# The second line just tells Java where to the properties of your Java Configuration*
*# NOTE: These java settings will be applied to each user file and will overwrite existing ones*
deployment.system.config.mandatory=True
deployment.system.config=file\:C\:/WINDOWS/Sun/Java/Deployment/deployment.properties
If you look in C:\Users\USERNAME\AppData\LocalLow\Sun\Java\Deployment on Windows 7 for example you will find "deployment.properties". You can use this as your default example and add your settings to it.
How?
Easy. If you want to add *"Use SSL 2.0 compatible ClientHello format"*
Add this line:
deployment.security.SSLv2Hello=true
Maybe you want to disable Java update (which is a big problem for enterprises)
Add these lines:
deployment.javaws.autodownload=NEVER
deployment.javaws.autodownload.locked=
Below is a basic AutoIt script you could use (It compiles the files into the executable. When you compile the script the two Java files must be in the directory you specify in the FileInstall line, which can be anything you choose. It will also create your directory structure):
#NoTrayIcon
#RequireAdmin
#Region ;**** Directives created by AutoIt3Wrapper_GUI ****
#AutoIt3Wrapper_UseX64=n
#EndRegion ;**** Directives created by AutoIt3Wrapper_GUI ****
Func _JavaConfig()
     $ConfigFile_1 = @TempDir & "\deployment.properties"
     $ConfigFile_2 = @TempDir & "\deployment.config"
     FileInstall ("D:\My Documents\Autoit\Java config\deployment.properties", $ConfigFile_1)
FileInstall ("D:\My Documents\Autoit\Java config\deployment.config", $ConfigFile_2)
     FileCopy($ConfigFile_1, @WindowsDir & "\Sun\Java\Deployment\", 9)
     FileCopy($ConfigFile_2, @WindowsDir & "\Sun\Java\Deployment\", 9)
     Sleep(10000)
     FileDelete(@TempDir & "\deployment.properties")
     FileDelete(@TempDir & "\deployment.config")
EndFunc
_JavaConfig()
Now if you have SCUP and have setup Self Cert for your organization, you just need to create a SCUP update for JRE.
Edited by: 897133 on Nov 16, 2011 4:53 AM

To change the status of the KANBAN

Hello Experts,
Please let me know how to change the status of the KANBAN from empty to full.
Thanks in advance
Best Regards,
zubera

Hi zubera,
As quantum has suggested we can change the status of the Kanban in Kanban board...... in additon to that the GR of the replenishment object created through kanban (PO , Production order , STO) etc changes the status of the Kanban.
Regards
Kaushik

How to update user status in the QM notifications

Dear Experts,
PLz tell how to update/change user status in the QM notifications..I have maintained the user status profile and assigned the same to the notification type,but user status are not getting updated in the notifications..
Thanks in advance
Ankush

Hi,
SPRO - Quality Management - Quality Notifications - Overview of Notification Type.
In that select the concerned notification and click on the status profile and there you can assign the status profile for the concerned notification Type.
There will be two types,
status profile for notifications and status profile for tasks, assign as per the requirement.
Regards,
Naveen.

Change the status of the bank statement posting

Hi,
Happy new year.
A bank statement was posted to the sub ledgers but it was not posted to the General Ledger, even though it has an * as the document number.
Consequently, the G/L is not reporting the correct balance, and for year end reporting we need the correct figures.
I have tried to post it via FEBP, (with "suppress subsequent postings" & "Bk posting only" selected), but no data was selected.
How can I post the statement to the G/L?
Can I change the status of the bank statemetn from "posted" into "to be posted" and try it again?
Thank you for your feedback.
Kind regards,
Linda

Hello srikanth.
Thank you.
How can I check that?
Kind regards,
Linda

As an update, I installed an update 5.7on my Mac laptop, now the Lightroom 5.0 has become a "Lightroom Mobile" version. How can change it back to the laptop version?

As an update, I installed an update 5.7on my Mac laptop, now the Lightroom 5.0 has become a "Lightroom Mobile" version. How can change it back to the laptop version 5.7?
Thanks for any help you can provide.

LR on your laptop is still a desktop version. It is just now able to upload to the cloud to replicate photos to either http://lightroom.adobe.com/ or an iPad that has LR Mobile installed.
I think you probably just want to change the LR 5 identity plate back so it doesn’t mention LR Mobile all the time. Hover over the identity-plate area, and click on the little triangle that appears, then choose Change Identity Plate.

How do i find out the status of the ink in the HP 5510 machine?

Please can you advise how i find out what the status of the ink is in the "HP 5510" machine?

Hi,
Please use this:
From the Printer Home screen, touch the right directional key, and then touch the Ink icon to display the estimated ink
levels.
Regards,
Note: The ink icon is similar to a drp\op of water.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Changing the status of the sales order item based on reason for rejection

Hi All,
When a Sales order item is rejected then the status at the item level is changed as 'TECO'.When the reason for rejection is removed the status 'Teco' is reset.This status change can be achieved using the user exit 'MV45AFZZ'.But the exit does not allow re-atp calculation whenver a blocked item is release.I have use the exit 'MV45AFZB' ,through this the status change as well as re-atp calculation takes place.But the status changed(Based on reason of rejection) does not appear in the same screen.The change gets reflected only when the sakes order is saved and i open it again.
I want the status change to appear in the same screen.I am doing my code in the form 'userexit_check_vbap' of the exit 'MV45AFZB'. Please let me know if there are any user exits or BADI's available for the same(Changing the status of the sales order item based on reason for rejection ).
Regards,
S.Subasree

Hi subburamaiah
If you want the report you can create a separate SIS report . In that take the input field as a Reason for rejection.. and ask for the output the list of sales orders .Now when you check this user defined report you will give the reason for rejection and check what all orders got rejected on that reason for rejection.
Regards
Srinath

Attachment Downloading in Mail - How do you know the status of the download

Hi,
I'm trying to send a keynote presentation from my iMac to my MacBook and it doesn't seem to be working. The attachment shows up in my email, I click on it, and it doesn't really do anything. Is there a way to check the status of the download, or clear all the downloads for mail? I think it's just the size of the file, because pages files work, and even very small keynote files, but not a 3 slide keynote presentation.
Any help with this would be much appreciated.
Brandon

Hi Brandon
If you want to know quite a lot: http://en.wikipedia.org/wiki/LAN
In short a Local Area Network is your network at home. Both your computers are somehow conncted to the internet. Most people don't want to afford seperate internet lines for each computer they own, so they build a LAN.
Many internet providers will give you a modem with more than one network port so you can plug in more than one computers. If there's only one port, most people connect a router to get more ports. If you have wireless at home, you also have a LAN.
Now to the better options: On both copmuters: Go to system preferences > Sharing. Enable File Sharing. To learn more about it, just click on the question mark button at the lower right.
After you did this, open a Finder window. In the sidebar there will be a new item: Shared. If you open the triangle you'll see the computer name of your other computer. This can take a few seconds to show up.
Now you just place the files you want to share in your Public folder so the other Mac can access it.
Regards,
--greg

Is it possible for me to transfer my downloaded games from my itouch to my ipad? If yes, how? Will the status of the games be the same?

is it possible for me to transfer my downloaded games from my itouch to my ipad? If yes, how? Will the status of the games be the same?

As long as the apps are still available in the store, and you use the same iTunes account as you originally used to buy them, then you should be able to re-download them for free : http://support.apple.com/kb/HT2519
If you want to copy over your progress then you will need to try backin up the iPod and restoring that backup onto the iPad - you can't just restore individual apps, it's all or nothing.

How to maintain the status of the Thread ?

How to maintain the status of the Thread ?
namanc

I want to know whether a particular thread (java
application) is completed successfully or not ...
If the thread is not completed successfully then I
want to restart the Thread.
Actually this is the Task Scheduler Application ...
If the particular task is not running successfully
then I want to start the Task again ...
namancThen it could look something like this: // loading the queue
for each task
    add task to list of incomplete tasks
    enqueue task in work queue
// dispatcher
while !done()
    task = workQueue.dequeue();
    New Thread(task).start();When a task finishes, it can call a callback method on the dispatcher. The dispatcher looks at the task's status. If it finished successfully, the task gets removed from the list of incomplete tasks. Else it goes back on the work queue.
There will be some syncing issues involved. You'll have to use wait() and notify()/notifyAll() to handle the situation where the work queue is empty, and all incomplete tasks are being worked on. And the case where the dispatcher wakes up after the notifyAll() and there's nothing to dequeue and nothing in the list of incomplete tasks.
Clearly it needs some fine tuning, but I hope you get the idea.

How to change the status of the system programmatically with Function Module

Similar Messages

Maybe you are looking for