Embedding an applet full size in a browser window ?

Does anyone know if it is possible to embed an applet in a browser, so that it can stay maximized ?
I wrote an application wich I would also like to run inside a browser but in way, similar like 'pdf-viewer' for example, allways full size even after a resize of the browser-window.

Yes, it seems to work this way !
Sometimes the solution is so close that you are overlooking it.
Thanks !

Similar Messages

How do I stop text from resizing to the size of the browser window

Hello there,
I am using a DW CS3 template that has a sidebar div and a
main content div - the text in the main content div keeps resizing
to the size of the browser window - I don't want the text to resize
if I make the browser window smaller - I want it to remain the
same. I am trying to float the text right and input a width but
this is not working for me. What am I doing wrong?
HELP!
Many thanks!

>>What am I doing wrong?
Not giving us a link to the uploaded page so we can see the
page, how it
behaves and the actual code.
Until we see that you are unlikely to get a definitive
answer. The problem
is unlikely as you state it because text itself is never
dependant on the
browser viewport size.
Walt
"Fun Leprechaun" <[email protected]> wrote
in message
news:g9f7rq$ie4$[email protected]..
> Hello there,
>
> I am using a DW CS3 template that has a sidebar div and
a main content
> div -
> the text in the main content div keeps resizing to the
size of the browser
> window - I don't want the text to resize if I make the
browser window
> smaller -
> I want it to remain the same. I am trying to float the
text right and
> input a
> width but this is not working for me. What am I doing
wrong?
>
> HELP!
>
> Many thanks!
>

Can you change the design to adjust with the size of the browser window?

I am creating my first site in iWeb, and would like the image in the background to adjust as someone adjusts the size of their browser window. In other words, no matter what size their window is, the entire page fits. I would like it to accomodate small to large computers and windows without them having to scroll up/down or sideways.
Any ideas on how to do that?
Thanks!

Thanks Wyodor,
I apologize, but apparently I typed "background" image instead of just an image. I have an image on the page that I would like to size to do the same thing. There are layered images on top of it, and I need those images to remain in the same place because they are hyperlinked images that take them to another page. I have attached a photo of what it looks like here.
The agree and disagree buttons are the hyperlinks, and I want them to stay static with the image underneath them. I know that if I put the larger green image as a background image, to have it dynamic, the agree and disagree buttons would not stay in the correct spot when the browser size is adjusted. Thus, it brings me back to my question (but phrased correctly this time)... is there a way to have the entire site, images and all, be dynamic with the size of the browser? No matter what the size of the browser window, I would like the whole page to show so the hyperlink images stay with the image they are on top of.
Thanks!

Default size of new browser window launched from community links portlet

Does anyone know of a way to control the size of the new browser window that is launched when the user clicks a link in a Community Links portlet (or any other links that launch a new browser window)?
We default all users to open links in a new browser window and I can't seem to find any rhyme or reason to how it sizes the resulting window. Some community links come out really skinny and un-user friendly, while others are nicely sized to near full screen.
Is there some way to control this?
Thank you.
Darla

Darla,
Which version of the portal are you guys running? We are currently using 6.5 and all the links/Documents/ExternalLinks/Pages open up in a new browser window with the same sizes.
Its basically controlled by javascript.
G

How to reduce the size of the browser window

My firefox browser window is a full screen view. My monitor is a 24" flat-screen. When I first downloaded firefox the browser window was half the size it is now. How can I re-size the browser window back to the way it was? I think I clicked the full screen button in the top right hand corner - not sure; but now I can't reduce the browser window back to half size so I can see the rest of my desktop. Help!

If you run Firefox in full screen mode then press F11 or Fn + F11 to toggle (Mac: command+Shift+F).
If you are in full screen mode then hover the mouse to the top to make the Navigation Toolbar and Tab bar appear.
You can click the Maximize button at the top right to leave full screen mode or right click empty space on a toolbar and use "Exit Full Screen Mode" or press F11.

Can I specify (or find out) the size of a browser window?

I've noticed that when I resize a browser window that any new window also comes up at that same size.
Is there a way to see what the actual dimensions are for any given window?

javascript:alert(self.outerWidth"x"self.outerHeight)
to read,
javascript:self.resizeTo(800,600)
for one tab,
tell application "Safari"
set bounds of window 1 to {0, 0, 800, 600}
end tell
in script editor for any window.

SetCookie Javascript call from applet pops up the launcher browser window

Hi,
With Jre 1.5 we started seeing a strange problem.
From our applet code at the end of loading the applet we call a setcookie on our parent browser window (Browser window used to access our html/applet page).
Once we make this call the browser window comes on top of our applet window.
This was working fine earlier, with jre 1.5 we started seeing this issue. Any thoughts?
A workaround is to call the toFront() function on the applet window's mainframe and set it in the front again. I was wondering if any one have seen similar problem.
It happens only with IE on windows, no issue on netscape/mozilla.
Thanks
RT

this is now resolved. My call to the transaction was slightly incorrect. This is now the working code:
CONCATENATE 'http'
'://' host ':' port
'/sap/bc/gui/sap/its/webgui/?~transaction=*MIR4 RBKP-BELNR=5105600751' ';DYNP_OKCODE=SHOW'
into url.

How to set a fixed size for the browser window on startup?

so the browser window has the same size and location on the desktop every time i open a new window???

In a 2D coordinate system the horizontal values are represented by some letter, usually x. In the same coordinate system the vertical values are classically represented by y.
Note: In your code, if you wish, you can replace x and y with anything you desire--p and q or perhaps jeff and alice or any variable name you wish, but for simplicity, and usually ease of understanding because almost everyone has had 100's of math problems drilled into their head with (x, y), x and y are used as convention.
In Java the screen coordinates run from 0 to the width-1 for x and 0 to height-1 for y of the component you are using to display.
So logically when you have a value of x or y that goes beyond the addressable bounds of your display, then you have to make some type of adjustment--when your value dips below 0, you reset it to 0, when your value goes above what ever width-1 or height-1 then you have to set that value to width-1 or height-1.
This all assumes that when you hit the wall, floor, or ceiling you stick there until you change directions--if you wish to wrap then you set your value to the opposite bound--so if you go below 0, you would then pop out back in on the right side--your appropriate x would be set to width-1 instead of 0 and in the case of y going below 0 your y would be set to height-1. This is also to say that when you descend below your minimum, then you would pop back out on the opposite side you went out on--so x greater then width-1 would get set to 0 and y greater than height-1 would get set to 0.
That is not even a start on if you want to include elastic collisions, angle of impact, any type of deceleration force, or anything else.
In any case... I would recommend that you add more math to your studies, I've never met an engineer or computer science grad that said: "Wow, I really regret taking all that math in college (or HS), I never use it."

Can't work out how to get timeline footage to play full size in the Program Window...

I'm using Premiere Pro CS3. The footage I import plays fine in the Source Window, but is at a more reduced, "boxed-in" size in the Program Window when I put it onto the timeline.
I know that i can stretch the image to fit the frame, but I'm worried about losing quality if I do that.. The Zoom Level is set to "Fit", so I'm not completely sure what else to do... Any help would be much appreciated...

Hi Bill, thanks for the welcome!
The Frame Size of my original Source Footage is 720 X 404
I've set my Project Preset to DV-PAL - Widescreen 48kHZ, which upon inspection, is 720 X 576, so I'm guessing that's what the problem is..?
I've tried going into Custom Settings to change the Frame Size, but the boxes are "greyed out", not allowing me to change them..
Any ideas on how to best move forward? Cheers.

Is it possible to make an iframe full size to the browser inside muse , if using insert htm

using iframe code , it is coming in a small box want to use it to full browser

Hi,
You can use :
<iframe src="enter page link here" style="position:fixed; top:0px; left:0px; bottom:0px; right:0px; width:100%; height:100%; border:none; margin:0; padding:0; overflow:hidden; z-index:999999;">
Your browser doesn't support IFrames
</iframe>`
Enjoy working with MUSE !
Thanks
Prabhakar Kumar

Video for browser window help needed

Hi,
I have an idea for a website where it starts with a short
video that plays at what ever size the users window is at, then the
clip stops to a stand still and the user interface then pops up or
it may appear along with the video. . . but I'm a bit worried as
I'm kinda new to flash and I have no idea how I can get a video to
play to the full size of a browser window (not full screen) , I
think I can do the interface popup bit at the end though. Here is
an example of the sort thing I'm taking about
http://www.uniqlo.jp/uniqlock/
though their video goes on and on =] but it's roughly the same idea
with an interface built on top of it. Vision skate website has the
same thing too
http://www.visionstreetwear.com/
If any one has any ideas on how this can be done or maybe a
tutorial link that would great thanks.

The way that a flash file will display and stretch, or not,
is defined in the HTML options tab of the Publish Settings window.
You need to use both the Dimensions option and the Scale
option.

White border around full-size applet

I try to display an applet which spreads over the complete size of the browser window using a script element like this:
<body>
<script src="http://www.java.com/js/deployJava.js"></script>
<script>
var attributes = { code:'MyApplet.class', width:'100%', height:'100%' } ;
var parameters = {jnlp_href: 'my.jnlp'} ;
deployJava.runApplet(attributes, parameters, '1.4');
</script>
</body>
However, the applet still shows up a little smaller as the browser window so that it appears to be displayed within an approximately 5 pixel white border. Does anybody know how to get rid of this border?

Ups, my fault. It was simply the margin from the HTML body ;-)

Closing browser window from an Applet?

I've written a series of applets that perform different functions. I placed a button on each applet with the purpose to close the window in which that applet is running. However I don't even know where to start looking to find out how to make my applet close it's own browser window. I know how to open a new browser window from an applet but not vice versa.
Can anyone help please?
Mark.

Right, I sort of tracked down some code that uses getMethods to allow me to invoke a Javascript command. It is not pretty and took a little bit of editing to get to work but it does the job without putting JS stuff into my HTML.
However it is causing some problems. If I open one of my other applets it will only let me close that window and the previous applets ceases to respond at all. I think this may be because the invoke gets the JSObject which is the window and somehow having more than one applet open in different windows is causing it to get confused and is locking the first window and only responding to the second.
I have seen a much simpler method that uses:
import netscape.javascript.*;
and JSObject to get the window but my compiler complains about the import. Any further suggestions or an example would be welcome as my current solution is a bit limited as you can effectively only have one window open at a time which doesn't suit my needs.
Many thanks.
Mark.

Photo Gallery w/ Images adjusting size based on Browser size.

I'm new to web design but I'm trying to create a photo gallery with images that dynamically size based on the size of the browser window. Similar to this http://pageduke.com/#/Residential/Colonial%20Revival-Nashville1/1. I know th is a flsh site, but is there a way yo do it in HTML in Dreamweaver, maybe using Spry. I don't know Jquery, but is it possible that way.
Thanks

Nancy,
Woo is not a gallery. It's just a slider - a panel widget, which should
be adaptive/responsive by default. The problem is that for years, the
typical jQuery plugin writer simply copies stuff done by others so
someone finally realized you don't have to fix a width and a height if
you know how to write a stub script
Galleries are totally different. To do a responsive gallery is not so
easy and the only ones that come remotely close - using open source
scripts - do require an initial width. They will not scale both up and down.
I gusess it depends on what the original poster wants and/or cares about
in terms of efficiencies and functionality.
[External commercial link removed]
Message was edited by: Sudarshan Thiagarajan. Please refrain from posting external links advertising/ promoting products & services.

Set browser window size?

Is it possible to set the browser window - specifically IE - when opening my form when using seperateFrame=false?
I am developing a single window app that is lost in the IE window when it starts up. I would like to size the IE window in relation to my app when it opens.
Also, can I display something other than the dark grey background surrounding my form - perhaps replace it with a nice jpg?
Thanks
Richard

Richard,
- only if you start the browser window from another using javascript (window.open()) you can define the size of the browser window.
- set background = <image name> in the formsweb.cfg file
Frank

Embedding an applet full size in a browser window ?

Similar Messages

Maybe you are looking for