How to change the "TabIndex" of Controls?

Hello,
there are serval string/number input controls on a front panel, and I want to change the tab indics of them, because some users prefer to use "Tab"-Key than using mouse by inputing and the order of these control is really not logical. But I could not find any settings as "TabIndex", is there any way to do it?
Thanks a lot!
Le
Solved!
Go to Solution.

Hi,
Go to Edit>>Set Tabbing Order
Also if you want to skip a control right click the control and go Properties>>Key Navigation and select the skip when tabbing option
David

Similar Messages

How to change the size of control´s prompt?

No matter the size of data to be displayed in the view suface prompt, the controls have the same size.
Does anyone here know how to change the size of control in surface prompt?

HI,
In order to change the size of a radio button... one way you may consider is to Customise the Radio Button.
Place a Radio Button (RB) on the FP of a VI, Right-Click the RB > Advanced > Customise...
Click the Mode Button (most Left button) for Edit Mode
Right-click the radio button (the round image) now, you will see a list of actions i.e. Copy to clipboard, import picture ...You will see Four images under the 'Picture Item', those are the images that you will need to replace.
Prepare Four Images of the similar but larger expected size
*** Copy the 1st new image to clipboard. Back to the Picture Item and select 1st image. Then, select Import Picture (to replace the existing image)
Repeat *** for all four images.
Once done, change the mode back to original. Save the *.ctl
You are now ready to use the customised radio button!
Quick sample attached (sorry for the poor images created )
Ian F
Since LabVIEW 5.1... 7.1.1... 2009, 2010
依恩与LabVIEW
LVVILIB.blogspot.com
Attachments:
IFK_RButton_Large.ctl ‏11 KB

How to change the BP-customer Control Account for entering Opening Balance

Hi experts,
I am working on a project where I have used the segmented chart of account and segment is branch.
Project is under SAP B1 8.8 PL 05.
Customer has 2 branches. Now both the branch have different control account for debtors. Customer (BP) master is common for both the branches.
Now at the time of entering BP-Customer opening balance, I do not find the provison to select/change of control account. So all the opening balance entered will go into one control account only, which is set in business partner master for particular customer.
In SAP B1 8.8 at transaction level like Sales Invoice, there is provision to select the control account. Now I believe entering opening balance is the similar functionality as Sales Invoice and there should be provison for selection of control account to user.
Anyboady has any Idea / work around ?
Incase there is no provison then, I believe Product development team should take this in development of SAP B1 8.8.
BR
Samir Gandhi

Hi,
I suggest you to import BP opening balance by JE template of DWT in which you just put account code as your control segmented account and additional information in "shortname" field with customer/vendor code.
Hope this helps,
Son.

Change the info. in control record?

hi...
how 2 change the information in control record?Not in ALE?
bye.

you can use the various options in the IDoc adapter and change the info in the control record.
http://help.sap.com/saphelp_nw04/helpdata/en/96/791c42375d5033e10000000a155106/content.htm
The options like;
1. Apply Control Record Values from Payload
If you set the indicator, the conversion of communication parties to the IDoc partner is only possible for systems that are not logical systems.
If you do not set the indicator, all combinations of communication parties and services are handled as services without party.
If the IDoc XML structure contains a control record during outbound processing on the Integration Server, it is rejected and created again by the IDoc adapter. If you want to include additional values in the control record, set the indicator and provide an appropriate mapping for the values.
Take Sender from Payload
If you want to take the sender of the message from the payload and not from the configuration information in the Integration Directory, set this indicator.
If you do not set the indicator, the information is taken from the configuration in the Integration Directory.
Take Receiver from Payload
If you want to take the receiver of the message from the payload and not from the configuration information in the Integration Directory, set this indicator.
If you do not set the indicator, the information is taken from the configuration in the Integration Directory.
To know more abt the control records, ref: http://help.sap.com/saphelp_nw04/helpdata/en/13/95244269625633e10000000a155106/content.htm

How to change the caret/selection color of text input controls?

Hello JavaFX Community,
i'm new to JavaFX. I'm using it since i saw the huge steps forward with version 2.0.
I have the task to migrate a software from Swing to JavaFX. As a part of our corporate design, we used a special color for the caret and text selection. I couldn't find any information about changing the caret color in JavaFX 2, so i'd like to ask you and i'd be very thankful for an advise.
There is a cross-post at StackOverflow:
http://stackoverflow.com/questions/10057989/how-to-change-the-caret-color-in-javafx-2-0
Thanks and best regards.

This might be possible, but it is not trivial. You cannot do it with a standard API at this time, you will have to look into creating a skin that allows for these properties to be controlled.
For example, the color of the caret is currently controlled in the TextFieldSkin (look for the "caretPath" property). Just forcing a color change in a subclassed skin is not so hard. Something like this:
public class MyTextFieldSkin extends TextFieldSkin {
public MyTextFieldSkin() {
this.caretPath.fillProperty().unbind();
this.caretPath.fillProperty().set(Color.RED);
}However, it gets trickier if this color must be dynamic and if you want other things to be changed as well. It is a place to start though.
Many of the skins methods and properties are 'protected' though, so atleast in Skin subclasses you have a lot of options to introduce new features and behaviour.

How to change the width of a switch control?

If I set long on&off texts, they can't be fully displayed. How to change the width of this sap.m.switch control?
P.S., "width" attribute doesn't work here.

Hi Jocy,
A switch is just a simple boolean control : true/false, yes/no, on/off. Other possibilities are not possible.
If you to need to choose between, say, black/white, then a switch is *not* a good choice; nothing stops you from adding yellow/red/blue to the mix as well.
If you *do* have a strict boolean choice (again, only rue/false, yes/no, on/off) then I would suggest adding a descriptive label with the simple, short switch control.
Otherwise, I would strongly advice using a different type of control (RadioButtonGroup, DropdownBox)

How to change the font of the text in Control Editor??

How to change the font of the text in Control Editor??

Hi,
you have to create a smartstyle and acces that in So10 transaction.in change mode,menu->FORMAT->CHANGE STYLE.
here you will get all styles available.
so first you have to create a style in SE72 and activate it. and then
goto SO10-> change mode
menu->FORMAT->CHANGE STYLE.
now you will see the style you have created. select that.
now you can see the format.
Reward points
Regards

How to change the COA in the controlling area master?(tx:ox19)

I have just created a controlling area for a company,and I choose "CoCd->CO area", But I define the COA is INT ,the default COA in IDES.
Now I want to assign it a new COA which I have defined.
How can I make it?
Thanks.
Message was edited by:
sandor wang

Ok, I have changed the coa in controlling area.
1.obr1
2.okc3
3.okc5
The answers is SAP burtcher.Thank you.

How to change the Control icon in window

hi to all
this is my first post to thiss forum and im using java swing for desktop application im facing a little problem is that how to change control icon on window created by java swing example is here
http://i108.photobucket.com/albums/n15/zerocool_007/window.jpg
how to change the red circuled icon any simple code tips will help mee
zero

myJFrame.setIconImage(img);
where img is an Image object.
The easiest way to create an Image is the following:
Toolkit toolkit = Toolkit.getDefaultToolkit();
Image img = toolkit.getImage("myImage.jpg");
remember you need to import java.awt.Toolkit at the top of your class.
Good Luck,
Eugene

How to change the default currency in CJ32 and CJ33

Dear all,
As required by the user, I want to know how to change the default currency from controlling area currency to object currency in TCODE CJ32 and CJ33. Currently, the controlling area currency will be defaulted in the field "Views in".
Could any one help me? Points will be awarded.
Thank you.
Christina.
Edited by: Virendra Pal on May 5, 2010 8:34 AM

Hi Christiana ,
Once you are in tcode CJ30 / CJ32 , Enter either Project definition or WBS element and this shall take you to the Budget screen and once you are here you can find a drop down with two options .One is Controlling are currency and the other one is Object currency.
Since the Currency is set to Object currency in OPS9, System shall allow the budget values in Object currency and if the user wants to see the same values in Controlling are currency ,then the user needs to view the values in Controlling are currency using the drop down .
Regards
Judy

How to change the default structure when exporting data in CSV format?

Hello,
can some one tell us how to change the default structure in CRM when exporting lists in CSV format (with Option "Always use unformatted list format (CSV) for download" ? Because we want to add a new structure for our own -is it possible ?
If it is possible where can we find these structure ? In the blueprint customizing ?
Thank you very much,
Christian

There is a workaround to move from 1.5 version to the older 1.4 version. But this could be specific to the browser setting the JRE version.
Excerpts from sun docs:
However, a user can still run older versions. To do so, launch the Java Plug-in Control Panel for the older version, then (re)select the browser in the Browser tab.
Example:
Assume you are running on Microsoft Windows with Microsoft Internet Explorer, have first installed version 1.4.2, then version 5.0, and you want to run 1.4.2.
Go to the j2re1.4.2\bin directory where JRE 1.4.2 was installed. On a Windows default installation, this would be here: C:\Program Files\Java\j2re1.4.2\bin
Double-click the jpicpl32.exe file located there. It will launch the control panel for 1.4.2.
Select the Browser tab. Microsoft Internet Explorer might still appear to be set (checked). However, when 5.0 was installed, the registration of the 1.4.2 JRE with Internet Explorer was overwritten by the 5.0 JRE.
If Microsoft Internet Explorer is shown as checked, uncheck it and click Apply. You will see a confirmation dialog stating that browser settings have changed.
Check Microsoft Internet Explorer and click Apply. You should see a confirmation dialog.
Restart the browser. It should now use the 1.4.2 JRE for conventional APPLET tags.
Details are here
http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/jcp.html
My system (Windows XP) has the version 1.5_09 set as the default. However i just installed JRE 1.5_06 and would like to revert back to _06 as the default JRE..
Will update if i find more information

How to change the default date in Person assignment tab?

Hi experts,
Does anyone know how to change the default date in person assignment tab in cj20n? Currently, the system always take the scheduled finish date to the date of the person assignment tab. Can I change it to the start date?
Thanks and rgs,
Michelle

Hi Michelle,
Goto SPRO->Project system->Dates->Scheduling->Specify Parameters for Network Scheduling, Here you can control the workforce planning dates.
Hope this is useful...
Regards
Aatish

How to change the default JRE when there are several version of JRE in Sys

How to change the default JRE when there are several version of JRE in System?
i have installed j2sdk1.5.0 then installed j2ee1.4,then installed Weblogic6.1 which use jdk1.3
Now the JRE is jdk1.3\bin
When run class that was compiled with jdk1.5,throw:
java.lang.UnsupportedClassVersionError
How can i change the jre to 1.5?

There is a workaround to move from 1.5 version to the older 1.4 version. But this could be specific to the browser setting the JRE version.
Excerpts from sun docs:
However, a user can still run older versions. To do so, launch the Java Plug-in Control Panel for the older version, then (re)select the browser in the Browser tab.
Example:
Assume you are running on Microsoft Windows with Microsoft Internet Explorer, have first installed version 1.4.2, then version 5.0, and you want to run 1.4.2.
Go to the j2re1.4.2\bin directory where JRE 1.4.2 was installed. On a Windows default installation, this would be here: C:\Program Files\Java\j2re1.4.2\bin
Double-click the jpicpl32.exe file located there. It will launch the control panel for 1.4.2.
Select the Browser tab. Microsoft Internet Explorer might still appear to be set (checked). However, when 5.0 was installed, the registration of the 1.4.2 JRE with Internet Explorer was overwritten by the 5.0 JRE.
If Microsoft Internet Explorer is shown as checked, uncheck it and click Apply. You will see a confirmation dialog stating that browser settings have changed.
Check Microsoft Internet Explorer and click Apply. You should see a confirmation dialog.
Restart the browser. It should now use the 1.4.2 JRE for conventional APPLET tags.
Details are here
http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/jcp.html
My system (Windows XP) has the version 1.5_09 set as the default. However i just installed JRE 1.5_06 and would like to revert back to _06 as the default JRE..
Will update if i find more information

How to change the default save encoding of the dvm files when create dvm???

When I creating a DVM(domain-value mapping) in Chinese on the ESB control and confirm it, then restarted the SOA service, the DVM that I created in Chinese disappeared from ESB control. All the maps(both English and Chinese ) are in DVM Repository.
After I updated the encoding from ‘UTF-8’ to ‘GB2312’ in the three files below, and restarted the SOA service, the DVM in Chinese appeared on ESB control.
But when I adding the second row in Chinese and save it, then restart the SOA service, the DVM in Chinese disappeared from ESB Control once again. Because the encoding in the three files below is updated from ‘GB2312’ to ‘UTF-8’ .
Files:
C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\store\metadata\files\dvm.def.xml
C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\store\metadata\files\dvm\Chinese.xml.def.xml
C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\store\content\files\dvm\Chinese.xml_1.0
How to change the default save encoding of the dvm files when create dvm in ESB control ???

I have the same problem. When I updated to Mavericks now the bookmarks bar font is huge. I liked it the way it was before. I liked the smaller font. Also wish I could change the color of the sidebar and font/folders too.
I tried to see in preferences if there was anyway to change it, but I don't see anything there.

How to change the initial page without open safari

Hi everybody,
I have problems opening my safari because of the plugin silverlight. I defined a tvair.swisscom.ch page as initial and it makes an error open it. it means that my safari doesn't work at all.
i want to know if somebody knows how to change the initial page from safari without open safari and solve this problem.
thx
cheers
nun

Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
~/Library/Preferences/com.apple.Safari.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test. Optionally, restore the file from a backup that predates the problem.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

How to change the "TabIndex" of Controls?

Similar Messages

Maybe you are looking for