How to change the textarea to html editer in knowledge maintenance page ?

Hi, experts,
When we maintain the knowledge, we typed infomation into the textarea.
Now we want to use html tags to show the knowledge info, so that the text can be shown in html table.
how to change the textarea to html editer ?
Thanks.
Oliver.

closed.

Similar Messages

How to change the color for HTML words in JEditorPane?

Hi Sir,
In the JTextPane , we could change the word's color by using:
Style style = doc.addStyle("test",null);
StyleConstants.setForeground(style, Color.red);
doc.setCharacterAttributes(10,20,syle,true);
we can change the text into red color,which range is from 10 to 30.
But how to change the color for HTML words in JEditorPane?

Hi,
you can use an AttributeSet to apply the foreground color. Let's say, doc is a HTMLDocument, then SimpleAttributeSet set = new SimpleAttributeSet();
doc.getStyleSheet().addCSSAttribute(set, CSS.Attribute.COLOR, "#0D0D0D"); would apply a color to a given AttributeSet. The AttributeSet with your color then can be applied to a selected range of text in a JEditorPane by /**
   * set the attributes for a given editor. If a range of
   * text is selected, the attributes are applied to the selection.
   * If nothing is selected, the input attributes of the given
   * editor are set thus applying the given attributes to future
   * inputs.
   * @param editor the editor pane to apply the attributes to
   * @param a the set of attributes to apply
public void applyAttributes(JEditorPane editor, AttributeSet a) {
    ((HTMLDocument) editor.getDocument()).getStyleSheet().addCSSAttribute(set, CSS.Attribute.COLOR, "#0D0D0D");
    editor.requestFocus();
    int start = editor.getSelectionStart();
    int end = editor.getSelectionEnd();
    if(end != start) {
      doc.setCharacterAttributes(start, end - start, a, false);
    else {
      MutableAttributeSet inputAttributes =
        ((SHTMLEditorKit) editor.getEditorKit()).getInputAttributes();
      inputAttributes.addAttributes(a);
} Ulrich

Will someone please tell me how to change the name of a folder I created in Pages and saved to the cloud?

Will someone please tell me how to change the name of a folder I created in "Pages" and saved to the "Cloud"? Thanks.

Go to the open dialog in Pages and select iCloud.
Click on the folder that you created on iCloud to open the folder.
On the lower half of the window (the open folder) click on the name of the folder.
Once you click and select the folder's name it should be editable.

How to change the suffix for externally edited files?

Hi,
How can I change the suffix Lightroom adds to externally edited files?
If I want it to be "-E" instead of "-Edit" for example, or "-Mod" instead of the long and ugly "-Modifier" in french version.
That would help me to get shorter filenames.
Thank you!

Preferences>External Editing tab
Edit Externally File Naming: section
Change the Template

How to change the shape of an Edit in FCP6

Hi, i need to change the shape of the edit in FCP6 so it is not square, ie: grab each corner and drag to create a mis-shape, does anyone know how ?
Thanks
Paul

Hi I tried distort but entering values rather than grab the handles in the corners is tricky, also not had much luck with the 4 point GM, i need to be able to distort the sq perspective and this the 4PGM seems just change the shape around it !!
Unless I'm doing it wrong !
Paul

How to change the file main.html in catalyst?

My Web Hosting can not accept files with main.html, only with index.html. How to rename the file in Catalyst? Please do not tell me I have to go to the builder to do this.
here is the link: http://www.insight-gd.com and see what comes up.
thx
Mike

chris, I'm in open war with the people from my server hehehe, they say that it is possible to accept the domain main.html. But my question is if I return the letter M by m, will not interfere in other files?
thx
Mike

How to change the color of blog titles on blog archive page?

So while I'm waiting for apple to fix iweb's publishing problem, I might as well do a revamp of my site in the meantime.
One thing I've been itching to change, but can't is the color of the blog titles on the main blog archive page? They show up in red, even when I change the color on the actually blog entry page to blue. Can anyone please help?
http://web.mac.com/stephenjames716/iWeb/home/blog/blog.html
Thanks,
Steve

All of this style information is contained in the .css files that iWeb publishes. Here is a very informative introduction to editing these files...
http://www.rowan-cottage.co.uk/Site/CSS%20in%20iWeb.html

How to change the fonts (permanently) for new (empty) documents in pages

I am searching for a way to change the settings/preferences of Pages / Numbers and Co such, that the standard font is not Helvetic, but a font of my choice. I am used to this from the MS Office products in my job, but want to keep my Mac "clean" and "pure".
I know that I can create and save templates. But somehow I feel, it must be possible to just open an empty/blank document with the font of my choice.
Any idea?
Best regards
Diethard

--
--[SCRIPT setiWork_defaultfont]
Si vous choisissez "Pages" vous verrez:
/* ----- Font Names */
"FONT_Helvetica" = "Helvetica";
"FONT_Helvetica-Bold" = "Helvetica-Bold";
"FONT_Helvetica-Oblique" = "Helvetica-Oblique";
"FONT_LucidaGrande" = "LucidaGrande";
La police utilisée par défaut dans les textes, les notes et les tables est celle dont le descripteur est "FONT_Helvetica"
éditez la ligne correspondante comme suit:
"FONT_Helvetica" = "nomDeVotrePolice";
Par exemple, pour utiliser Palatino, remplacez nomDeVotrePolice par "Palatino-Roman"
Enregistrez le fichier ainsi modifié par (cmd + S)
Si vous choisissez "Numbers" vous verrez:
/* ----- Font Names */
"FONT_Helvetica" = "Helvetica";
"FONT_HelveticaNeue" = "HelveticaNeue";
"FONT_HelveticaNeue-Bold" = "HelveticaNeue-Bold";
"FONT_LucidaGrande" = "LucidaGrande";
"FONT_MarkerFelt-Thin" = "MarkerFelt-Thin";
La police utilisée par défaut dans les textes, les notes et les tables est celle dont le descripteur est "FONT_HelveticaNeue"
éditez la ligne correspondante comme suit:
"FONT_HelveticaNeue" = "nomDeVotrePolice";
Si vous choisissez "Keynote" vous verrez:
"STYLESeries2" = "Series_2";
"STYLE_None" = "Aucun";
"STYLESeries5" = "Series_5";
"STYLESeries3" = "Series_3";
"FONT_LucidaGrande" = "LucidaGrande";
"FONT_Helvetica" = "Helvetica";
"STYLE_Free Form" = "Format libre";
"STYLESeries1" = "Series_1";
"FONT_GillSans" = "GillSans";
"STYLE_Normal" = "Normal";
"STYLESeries0" = "Series_0";
"FONT_MarkerFelt-Thin" = "MarkerFelt-Thin";
"STYLESeries4" = "Series_4";
La police utilisée par défaut dans les textes, les notes et les tables est celle dont le descripteur est "FONT_GillSans"
éditez la ligne correspondante comme suit:
"FONT_GillSans" = "nomDeVotrePolice";
Une liste de 564 noms de polices est disponible sur mon iDisk:
<http://idisk.me.com/koenigyvan-Public?view=web>
Téléchargez:
ForiWork:despolices.numbers.zip
If you choose "Pages" you will see:
/* ----- Font Names */
"FONT_Helvetica" = "Helvetica";
"FONT_Helvetica-Bold" = "Helvetica-Bold";
"FONT_Helvetica-Oblique" = "Helvetica-Oblique";
"FONT_LucidaGrande" = "LucidaGrande";
The font used as default for tables is the one whose descriptor is "FONT_Helvetica"
edit the line as:
"FONT_Helvetica" = "yourFontName";
For instance, to use Palatino, replace "yourFontName" by "Palatino-Roman"
Save the file (cmd + S)
If you choose "Numbers" you will see:
/* ----- Font Names */
"FONT_Helvetica" = "Helvetica";
"FONT_HelveticaNeue" = "HelveticaNeue";
"FONT_HelveticaNeue-Bold" = "HelveticaNeue-Bold";
"FONT_LucidaGrande" = "LucidaGrande";
"FONT_MarkerFelt-Thin" = "MarkerFelt-Thin";
The font used as default for tables is the one whose descriptor is "FONT_HelveticaNeue"
edit the line as:
"FONT_HelveticaNeue" = "yourFontName";
If you choose "Keynote" you will see:
"STYLESeries2" = "Series_2";
"STYLE_None" = "Aucun";
"STYLESeries5" = "Series_5";
"STYLESeries3" = "Series_3";
"FONT_LucidaGrande" = "LucidaGrande";
"FONT_Helvetica" = "Helvetica";
"STYLE_Free Form" = "Format libre";
"STYLESeries1" = "Series_1";
"FONT_GillSans" = "GillSans";
"STYLE_Normal" = "Normal";
"STYLESeries0" = "Series_0";
"FONT_MarkerFelt-Thin" = "MarkerFelt-Thin";
"STYLESeries4" = "Series_4";
The font used as default for tables is the one whose descriptor is "FONT_GillSans"
edit the line as:
"FONT_GillSans" = "yourFontName";
A list of 564 names is available on my iDisk:
<http://idisk.me.com/koenigyvan-Public?view=web>
Download:
ForiWork:despolices.numbers.zip
Yvan KOENIG (Vallauris, FRANCE)
5 mars 2009
on run
if my parleFrancais() then
set prompt1 to "Choisir l'application"
set prompt2 to "Choisir un modèle"
set prompt3 to "Choisir une localisation"
else
set prompt1 to "Choose the application"
set prompt2 to "Choose a template"
set prompt3 to "Choose a localization"
end if
choose the application *)
set theApp to choose from list {"Pages", "Numbers", "Keynote"} with prompt prompt1
if theApp is false then error -128
set theApp to item 1 of theApp
define some parameters *)
if theApp is "Pages" then
set permitted to {"com.apple.iWork.Pages.template", "com.apple.iWork.Pages.sfftemplate"}
set sub to "Templates"
set theStrings to "Localizable.strings"
else if theApp is "Numbers" then
set permitted to {"com.apple.iWork.Numbers.template", "com.apple.iWork.Numbers.sfftemplate"}
set sub to "Templates"
set theStrings to "Localizable.strings"
else (* it is "Keynote" *)
set permitted to {"com.apple.iWork.Keynote.kth", "com.apple.iWork.Keynote.sffkth"}
set sub to "Themes"
set theStrings to "fontsAndText.strings"
end if
choose the template *)
set p2f to (path to applications folder as text) & "iWork '09:" & theApp & ".app:Contents:Resources:" & sub
if 5 > (system attribute "sys2") then (*
it's Mac OS X 10.4.11 *)
set allowed to permitted
else (*
it's Mac OS X 10.5.6 with a bug with Choose File *)
set allowed to {}
end if
set p2f to (choose file with prompt prompt2 default location (p2f as alias) of type allowed) as text
choose the localization folder *)
set p2f to p2f & "Contents:Resources"
set p2f to (choose folder default location (p2f as alias) with prompt3) as text
open the localizable.strings file *)
tell application "Finder"
set nb to count of (files of folder p2f whose name starts with "localizable")
if nb = 1 then duplicate file theStrings of folder p2f (* as there is no backup, duplicate "localizable.strings" for safe *)
open file theStrings of folder p2f
end tell -- Finder
end run
--=====
on parleFrancais() (* Check if Pages is running in French *)
local z
try
tell application "Pages" to set z to localized string "Cancel"
on error
set z to "Cancel"
end try
return (z = "Annuler")
end parleFrancais
--=====
--[/SCRIPT]
Yvan KOENIG (VALLAURIS, France.) mardi 11 août 2009 11:29:14

How to change the back ground colour of region and a page

Hello Gurus,
I want to change the look and feel of the page that I have created. Coul you please help me which attributes or properties needs to be updated?
Thanks in Advance.

Hi,
Please try enabling '''Allow pages to choose their own colors, instead of my selections above''' in '''Tools''' ('''Alt''' + '''T''') > '''Options''' > '''Content''' > '''Colors'''. [https://support.mozilla.org/en-US/kb/Options%20window%20-%20Content%20panel Options > Content]
If the problem persists please also check in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
[http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]

How to change the HTML/XML test data to test my_abap_proxy in SE80?

Hello,
I am trying to test my_abap_proxy in SE80 by usng a HTML/XML file of my desk top, the test data is as below
<LoadingDate>20110422</LoadingDate>
<DocumentDate>20110422</DocumentDate>
<SDDocumentCategory>G</SDDocumentCategory>
so on.......
Now, i want to change the Loading date in this test data, so, i tried after Loading file in Test Service Provider screen of my_abap_proxy of SE80, but i could not make change ANY data in this test data, pls. let me know how to change the data?
Thank you

Hello ABAP_SAP_ABAP ,
Youneed to select the option "generate template data " and then on the displaying template there you will see the option for editing in the top left corner toolbar.
Then after editing you can do a XMl syntax check and test your proxy.
Hope this helps.
Thanks,
Greetson

How to change the width of the EditForm.aspx and NewForm.aspx for both new and edited list entries?

How to change the form widths for the EditForm.aspx and NewForm.aspx files that display both new and edited list entries?

Hi ,
According to your description, my understanding is that you want to modify the width of the New Form and Edit Form of a list in SharePoint 2010 .
1.Go to your SharePoint site -> your list.
2.In top ribbon click List tab(List Tools).
3.Towards right you will see option as Form Web Parts, click on it, the three forms will be listed there [New Form, Display Form, Edit Form].
4.Select the one on which you want to increase the width/height.
5.It will open in edit mode, click on Add a Web Part.
6. Click on Forms [Categories] => HTML Form Web Part.
7.After adding the HTML Form Web Part, click on Edit WebPart.
8.Click on Source Editor, Remove all code from it and put an empty HTML table with width and height as per your requirement ex. to increase width
<TABLE WIDTH="800px">
<TR><TD></TD></TR>
</TABLE>
9.Save the form and check out your respective modal by clicking on the same in your list view.
Reference:
http://sharepoint.stackexchange.com/questions/40580/how-to-modify-width-of-standard-dialog-form-sharepoint-2010
Best Regards,
Eric
Eric Tao
TechNet Community Support

For the life of me, I can't find out what size a photo is in terms of inches or how to change the size of the photo[s] so I can print them. I think I read somewhere to click edit, then click adjust. Nothing there about sizing.

For the life of me, I can't find out what size a photo is in terms of inches or how to change the size of the photo[s] so I can print them. I think I read somewhere to click edit, then click adjust. I don't see anything about re-sizing when I click the adjust tab: only saturation and tint levels. Thank you.

With respect to digital images, there really is no size in inches. The size is given as number of pixels horizontally and vertically. In iPhoto '09 you click the little "i" inthe lower right side of the window and it will display information related to the selected photo, including the pixel dimensions. I do not have iPhoto '11 installed so I don't know if it is the same there.
In some applications, such as preview, it has something additional called Dots per Inch (DPI) which you would think would allow you to convert the pixel dimensions to inches. It is not a real thing, though. The DPI is determined by how large or small you have chosen to print your photo and the capabilities of your printer.
There is also something called Aspect Ratio, which is usually expressed in inches x inches such as 6x9 but that doesn't mean the size on the screen or when printed is 6x9. It is the ratio of the pixel dimensions. When cropping your photos, you will have several standard aspect ratios to choose from plus any custom ones you create.
In iPhoto '09, after you choose Print, in the Print Setting window are the settings for the size you want the photo printed. You want to shoose a setting with the same aspect ratio of your photo. Otherwise, iPhoto will resize and/or crop your photo to fit the size you have chosen.

How to change the color of text but only when that text is highlighted

I am NOT asking how to change the highlight color OR how to change the text color generally, but rather, how to change the text color as it shows onscreen while it is highlighted. Here's where I'm going:
Text is ordinarily black (assume) such as when the Finder is open or when viewing a list of all emails in an inbox.
Let's say I change the highlight color systemwide, in prefs > appearance > highlight color, to a custom color ("other") of black (for example).
In certain programs (mail, billings, iBank, addressbook, even the Finder), when I highlight a line of something, (like when I one-click on an email or a file name just to select it but not open it), the line will highlight in black, but the text of that line will automatically change to white so it can be seen.
However, when I highlight actual text (click and drag or double click), such as when editing a document in Pages and selecting a word, line, paragraph, editing an email, etc., the highlight is black, and the text remains black also, which means it cannot be seen (black on black).
So, how do I change it so that when I highlight the actual text the text color changes to white, then when it is de-selected, it goes back to black.
I'm not afraid to do a little terminal/command line, but only if it’s a little. Hope this gives enough detail.
Thanks.

You can use span HTML tag.
For example, if your label is "Product Name", and you want it to appear in red, you can type this:
<span style="color:red">Product Name</span>Hope it helps.
Ravi

How to change the timezone in photo metadata?

After returning from a recent trip out west, I forgot to change my camera's timezone to the local time. As a result, hundreds of photos from a long weekend trip were recorded with the wrong timezone. I imported them to Lightroom 5 and discovered the problem. Of course, I used the Edit Capture Time feature as described in the online help: https://helpx.adobe.com/lightroom/help/metadata-basics-actions.html#change_the_photo_captu re_time
But that changes the time of each photo's metadata, rather than the timezone. There's a subtle difference; the better solution would be to change the timezone so that all future interpretations and exported times would be correct. For example, here's the original metadata from a RAW image:
DateTimeOriginal                : 2014:08:23 09:13:45
Timezone                        : -07:00
and here's what appears on an exported JPG file, after the capture time was edited:
DateTimeOriginal                : 2014:08:23 11:13:45
TimeCreated                     : 11:13:45
DigitalCreationTime             : 09:13:45
DateTimeCreated                 : 2014:08:23 11:13:45
DigitalCreationDateTime         : 2014:08:23 09:13:45
[These metadata reports were produced by exiftool.] Notice how the RAW image includes Timezone (though sadly the JPG export does not). More to the point, look at the variety of timestamps produced for the JPG file, none of which mention the timezone and two of which have the wrong time (9:13am instead of 11:13am). Without the timezone information the latter is hard to interpret and looks inconsistent. Is this a bug in LR5? or is it a missing feature (to not record the timezone on export)?

There's not a simple explanation of the behavior you're observing. It's not a bug -- LR is doing a reasonable job of following imperfect industry standards.
The photo/camera industry in general does not make it easy to deal with time zones. LR's general approach is to preserve whatever time zones are present in the metadata but otherwise ignore them -- it doesn't change them, and it doesn't display them. As you discovered, the Edit Capture Time command does not let you change time zone, but it does preserve whatever time zones are present in the metadata (but see below for one exception).   LR's handling of time zones conforms with Metadata Working Group's Guidelines For Handling Image Metadata 2.0, an industry standard supported by Adobe, Apple, Canon, Microsoft, Nokia, and Sony.
The EXIF metadata inserted by cameras does not provide an official field to record time zone (folklore among metadata geeks is that one of the technical leaders of the spec, when challenged about that, asked why anyone would want time zones). Some cameras insert the non-industry-standard EXIF field TimeZoneOffset. I don't know the entire history of this field, but it's not defined in the EXIF 2.2 or 2.3 specs, nor mentioned in the Metadata Working Group's Guidelines For Handling Image Metadata 2.0. The field is not well-defined -- it only allows offsets of whole hours, whereas over a billion people live in a time zone whose offset is +5:30 (India).
LR preserves EXIF:TimeZoneOffset in your original photo, but it otherwise ignores the field, and it doesn't get copied to exported photos. This is not unreasonable, given that the field is non-standard.
The XMP metadata fields, typically inserted by software applications, do support time zones, but including a time zone is optional. LR preserves XMP time zones that are present when the image is imported, even if you change the date/time with Edit Capture Time. Your original photo did not contain any XMP fields (cameras typically don't insert XMP), so there were no time zones there for LR to preserve.
The Digital Creation date/time fields you observed are intended to record when an image was digitized. With digital cameras, that's generally the same as capture time, but with scanned images, the date/time of digitization (scanning) is different from the date/time the image was originally captured. LR's handling of these two different date/times isn't great, but it's adequate for most users. LR will insert the digitization date/time when an image is first imported (if it doesn't already exist), but Edit Capture Time changes just the capture time, not the digitization date/time. (A few years ago Adobe changed Edit Capture Time in a point release to also change digitization date/time, on the theory that LR is designed for images from digital cameras, and the two date/times should always be the same; but a number of users who also used LR to manage scanned images complained loudly that LR was overwriting precious metadata, and Adobe backed out that change in the next release.)
So Edit Capture Time will leave photos taken by digital cameras with an incorrect digitization date/time. But very few users care about that -- it's only users with scanned images who care about the difference, and at least LR will avoid overwriting digitization date/time.
A suggestion for using Exiftool to examine image metadata: Use the "-a -G" options, which causes Exiftool to show which section of the metadata the fields are coming from.   Given the complexity of the legacy metadata industry standards, this will help you better understand what your camera and software tools are doing. For example:
[EXIF]          Modify Date                     : 2014:08:31 10:01:45
[EXIF]          Date/Time Original              : 2014:08:13 11:53:44
[EXIF]          Create Date                     : 2014:08:13 08:53:44
[IPTC]          Date Created                    : 2014:08:13
[IPTC]          Digital Creation Date           : 2014:08:13
[XMP]           Modify Date                     : 2014:08:31 10:01:45-07:00
[XMP]           Create Date                     : 2014:08:13 08:53:44
[XMP]           Metadata Date                   : 2014:08:31 10:01:45-07:00
[XMP]           Date Created                    : 2014:08:13 11:53:44
[Composite]     Date/Time Created               : 2014:08:13 11:53:44
[Composite]     Digital Creation Date/Time      : 2014:08:13 08:53:44

How to change the Hello Portlet in Jetspeed2 Demo

hi ppl,
I am having a big problem..
I can't change the portlet title, hello portlet, in the jetspeed 2 demo.
The strange things is that i am able to change the title of the pickANumber portlet.
@ Portlet.xml
<portlet id="PickANumberPortlet">
<init-param>
<name>ViewPage</name>
<value>/WEB-INF/demo/simple/PickANumber.jsp</value>
</init-param>
<init-param>
<name>HelpPage</name>
<value>/WEB-INF/demo/simple/PickANumberHelp.jsp</value>
</init-param>
<init-param>
<name>EditPage</name>
<value>/WEB-INF/demo/simple/PickANumberEdit.jsp</value>
</init-param>
<portlet-name>PickANumberPortlet</portlet-name>
<display-name>Pick a number game</display-name>
<portlet-class>org.apache.jetspeed.demo.simple.PickANumberPortlet</portlet-class>
<expiration-cache>-1</expiration-cache>
<supports>
<mime-type>text/html</mime-type>
<portlet-mode>VIEW</portlet-mode>
<portlet-mode>HELP</portlet-mode>
<portlet-mode>EDIT</portlet-mode>
</supports>
<supported-locale>en</supported-locale>
<supported-locale>fr</supported-locale>
<supported-locale>ja</supported-locale>
<resource-bundle>org.apache.jetspeed.demo.simple.resources.PickANumberResources</resource-bundle>
<portlet-info>
<title>Change TITLE</title>
</portlet-info>
<portlet-preferences>
<preference>
<name>TopRange</name>
<value>100</value>
</preference>
</portlet-preferences>
</portlet>
See.. i just replace that data in the portel-info/title.. and it changes the title in the pickANumber portlet change..
But strange! i can't do the same way for the hello portlet
Can someone tell me how to change the title in the hello portlet...
Pls help.. i am running out of time!

The hello portlet uses the title string in property file, thus you may need to modify the file "demo\WEB-INF\classes\org\apache\jetspeed\portlet\helloworld\resources\HelloWorldResources_en.properties" to change its title.

How to change the textarea to html editer in knowledge maintenance page ?

Similar Messages

Maybe you are looking for