How to change the valution category of the existing material

Dears
Here is one problem I am facing for material selection in refurbishment process
The sap pm is already implemented 2 years back ,Now I want to implement the refurbishment process
Now the say 5 pumps are in stock with material code say xyz
Now I want to bring this material xyz under refurbishment process
When I go to change material in accounting view to make it valution category C based on condition it is now allowing then how to brought thease material under refrubishment process for valuation category c
Unless we change material it will not allow us for refurbishment process
Regards
chandrashekhar

hi chandra
do the following activities
create refurbishment order for 5 pumps
goods issue against the order
make the valuation category in the material(MM02)
create valuation type E1,E2,E3 in accounting view of material master (MM01)
cancel the goods issue using MB1A and MVT type 262 now specify the batch as E3
lock the refurbishment order for further prociessing
Create new refubishment order and do the remaining process
this process i have worked out and find successful .just try it
since for activating the split valuation the stock should be ZERO you have to use this awkard way
regards
thyagarajan

Similar Messages

HT2204 how to change the existing ID form App Store

how to change the existing ID form App Store

You can tap on the id in Settings > iTunes & App Stores and log out of the account and you can then log in with a different account. But any content that was downloaded via the currently logged in account will remain tied to that account (so only that account can download updates to its apps), and if you turn on automatic downloads for an account, use iTunes match or re-download past purchases then you risk tying the device to that account for 90 days : http://support.apple.com/kb/HT4627

How to change the existing sap logon ticket

HI
I did the System copy from my production server to Quality server.
Now everthing is working except Single Sign On. This is due to SAPlogon ticket.
the SAPlogon ticket show the PRD sid. I am not able to change the existing sid in ticket.
Tell me how to chage the old saplogon ticket with new one.
Workaround i did in my server.
generated the new certificate for Quality server and try to import in R/3 000 client. but not successful.

Hello Lee,
You dont have to import the certificate from R/3 into portal
we have to generate the certificate in portal and then import in R/3
To generate the portal certificate in quality Portal system and uploading in R/3,please find the method:
Log on to the Visual Admin of Portal with administrator id and password. Go to the following node: Server 0 1_34158->services and then Key Storage
In Key Storage, go to TicketKeyStorage
Under Entry, choose Create.
The Key and Certificate Generation dialog appears
Enter the Subject Properties in the corresponding fields
CN=<Common Name>, OU=<Organization Unit Name>, O=<Organization Name>, L=< Locality Name >, ST=<State/Province>, C=DE. give SID of portal in CN
Give the Entry name as SAPLogonTicketKeypair.
Select Algorithm as DSA,also click on store certificate and then generate
You will see along with SAPLogonTicketKeypair, SAPLogonTicketKeypair-cert will also get generated.
Now we will have to import this SAPLogonTicketKeypair-cert in the ABAP systems
First we will have to download the certificate from the portal.
Now logon to the SAP Netweaver Portal with user administrator
Go to System Administration->System Configuration and then Keystore Administration.
In the Content tab you will find the list of certificates
We have to download SAPLogonTicketKeypair-cert .Click on Download verify.der file
To your desktop
Now we have to import the certificate in ABAP system.
Log on to the ABAP system 000 client and use T-Code STRUSTSSO2
Under Certificate, click on Import certificate
Give the path of verify.der file. The file format should be Binary
And upload it.
Now you can see the certificate has been uploaded. Check for the validity
Now click on Add to certificate to add this.
Now click on Add to ACL.
Enter System ID as the portal SID(i.e is SPQ) and client as 000 and click on Ok
Then save your entries
Hope this makes it clear
Rohit

How to change the Existing alias with new alias name...MAXL SCRIPT

HI Experts
I need to change alias name of the existing member with new alias name.
please send me maxl code to change the alias name .
My thought is
1) Old alias should be replaced with new alias name .
2)There is one account that should be rolled out to another parent..these parents are already exsist
3) I need a MAXL Script to change the new alias name .
please suggest ASAP.
Thanks
USER

John
I heard that we can replace existing alias name with new alias thru MAXL
i.e replace alias name XXXX member with YYYY ;
please correct me if iam wrong ,might be Maxl command is wrong but this is the idea.
Thanks
USER

How to change the existing constraint for the table.

hi my table having the check constraint. but now i want to change the values in that constraint.
is it possible to change the check constraint values. and with out disable or drop my constraint. i dont want to change the constraint name also.
now i will give you my existing constraint and proposed constraint syntax.
my existing constraint Syntax is :
CONSTRAINT CONS_MRANTYPE
CHECK (MRAN_TYPE IN ('SP','JW','SD','SC','OT')
my proposed constraint syntax is :
CONSTRAINT CONS_MRANTYPE
CHECK (MRAN_TYPE IN ('SP','JW','SD','SC','OT','JR')
Thanks
Indra

Hi Indra,
this forum is for problems related to Oracle SQL Developer Data Modeler.
Philip

How to Change the Existing Sales Order Transaction

Hi all,
I am trying to change some of the fields in Existing Sales Order Transaction.
Fields which i am trying to change are Ext. Reference number and Net Value.
I am using CRM_ORDER_MAINTAIN to do so but its not working. I dont know if some BADI can solve my purpose.
If anyone of you have done something like this please share with me and suggest me the solution for that.
Thanks in Advance.
Regards,
Manoj Tiwari

That you should be able to do in ORDER_SAVE badi.
You will be able to find lots of discussions on usage of this badi here in this forum.
You need to call ORDER_READ, then call ORDER_MAINTAIN to change the values according to your requirement.
Regards,
Kaushal

How to change the email of the existing nokia acco...

I have forgotten the password of my existing nokia account password...and can't open the email which is associated with that account because I have forgotten that password too...how to change the existing account email id as I couldn't use the nokia music subscription because of this

If you have included a verified phone number, you can reset the password of your nokia account by entering your registered mobile number on the Forgot Password site. Once you have reset the password and access your Nokia account, you can now change the primary/associated e-mail address.
go to account.nokia.com>Sign in account>Personal Information>E-mail address>Edit>Input your password and email address (new email address)> Add.
To make it your primary email, under E-mail, click on Edit , select the new email address as your primary email and click on Set as primary.

How to change the layout of a category view

I don't know how to change the layout of a category. I want to put 3 image's behind each other followed by some text, like a table with 4 columns. Instead of puting then in 4 rows

larsprevo
The category 'view' of items/folders uses the default style of the content area it is defined in (shared categories use the default shared style). Edit the default style to change the font/color of the items/folders returned within the category 'view'. Unfortunately, you don't have the ability to control the layout(like folder regions) - they always display in rows.
Added an enhancement request for a feature that would allow you to control the display of items/folders in a category/perspective: 1828423

How to change the drop down list "Category" in the Risk page (PWA 2013)

Hello,
How to change the drop down list "Category" in the Risk page of a Project Site. I need to change the list of elements.
Thanks

Hi Robert,
You actually cannot edit the current template.
The process is as follow:
create a brand new project site from the existing template,
edit the site configuration (list, column, webparts, image, logo, theme...),
save it as a template,
associate it to an EPT.
See reference below:
http://blogs.msdn.com/b/brismith/archive/2010/03/15/customizing-the-project-site-in-project-server-2010.aspx
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

How to change the product category on the item level of a Sales order

1) For each product there are Basic Product Hierarchy and Sales Product
Hierarchy.
2) when creating sales order, system gets the Sales Product Hierarchy
on the Item level with the default logic.
So our question is: how to change the logic to let system get the Basic
Product Hierarchy on the Item Level.

Hi,
I believe the POSTING DATE will appear on the accounting document
In the Accounting document, the posting date will be based on the Billing date.
Please let me know if you need any more details
santosh

I modified the budget categories on the numbers template so now the transaction tab does not communicate with the budget tab. I figured out how to change the drop down options but how do I get it to reflect on my budget sheet? Please help.

If you are familar with the Numbers Budget Template it has two tabs 'Budget' and 'Transactions'. If you use the template as it is designed when you input expenses on the transaction tab it will automatically add that amount into the selected category on the budget tab. I have madified my budget tab to reflect the caegories that I need, which included adding several to the template. I also added to the table so it reflects my income and expenses so I can track where I am at with a glance. Since I did this, I can't get my transactions tab to communicate with the budget tab. I figured out how to change the options in the drop down box for category but I con't figure out how to get it to reflect onto my budget tab. I'm sure that it is an easy fix, however, I am just not well versed in Numbers. I appreciate your time in helping me with this issue.
Respectfully,
Jon

My guess is that while you added catetories to your Budget Sheet by adding new lines and filling in the category column, you didn't also add the formulas to these new budget lines.
The proper way to add those lines would have been to select a cell in the line just above where you want to add a line and type Option/Alt-DownArrow. This would have copied the formulas into the new line. Maybe you did this, and maybe not. You didn't give details on how you added the lines.
Select C2 and D2 and Command-C to copy them to the Clipboard.
Select all the cells of Columns C and D except for the top and bottom rows and Command-V to Paste.
If I have properly guessed the problem, you should be in business. This assumes that your Categories are exaclty the same as the entries in your Pop-up menus. Spelling counts, as does case.
Jerry

How to change the Field Symbol, so Adobe Forms takes it as a Table?

Hi guys,
I created an Field Symbol, in a Interface which I use for Adobe Forms. The type of the Field Symbol is STANDARD TABLE, and this field symbol I fill with data from another program.
But the problem is that in adobe forms, this Field Symbol is taken as TEXT FIELD and not as Table... and this shows me a Dump because it can't convert Internal Table to type C (the dump is like that).
What I need, is how to change the Field Symbol, so Adobe Forms takes it as a Table?
I looked at Adobe Form, and found this:
The Type Category of the Field Symbol is DICTIONARY TYPE and I think I need to change it to Internal Table as shown in the right picture.
Does someone have any idea?

Hello Taly,
To what i understand your requirement, you need to pass data from Field symbol to internal table in Adobe form.
You have done it correct partially. I have replicated your scenario and steps are below -
1) Create a Z structure
2) Create Z Table Type
3) Create Adobe Interface with Table & Field Symbol. Also do coding as shown to assign the internal table populated in driver program to filed symbol.
4) Design Form as -
5) Code driver as -
*& Report ZR_AF_FS_1
REPORT zr_af_fs_1.
DATA: fm_name TYPE rs38l_fnam,
 fp_docparams TYPE sfpdocparams,
 fp_outputparams TYPE sfpoutputparams,
 it_kna1 TYPE ztt_fs_1.
* Sets the output parameters and opens the spool job
CALL FUNCTION 'FP_JOB_OPEN' "& Form Processing: Call Form
 CHANGING
 ie_outputparams = fp_outputparams
 EXCEPTIONS
 cancel = 1
 usage_error = 2
 system_error = 3
 internal_error = 4
 OTHERS = 5.
IF sy-subrc <> 0.
* <error handling>
ENDIF.
*&---- Get the name of the generated function module
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME' "& Form Processing Generation
 EXPORTING
 i_name = 'ZAF_FS_1'
 IMPORTING
 e_funcname = fm_name.
IF sy-subrc <> 0.
* <error handling>
ENDIF.
*-- Fetch the Data and store it in the Internal Table
SELECT kunnr name1 name2 adrnr FROM kna1 INTO TABLE it_kna1 UP TO 15 ROWS.
* Language and country setting (here US as an example)
fp_docparams-langu = 'E'.
fp_docparams-country = 'US'.
*&--- Call the generated function module
CALL FUNCTION fm_name
 EXPORTING
 /1bcdwb/docparams = fp_docparams
 it_data = it_kna1
* IMPORTING
* /1BCDWB/FORMOUTPUT =
 EXCEPTIONS
 usage_error = 1
 system_error = 2
 internal_error = 3.
IF sy-subrc <> 0.
* <error handling>
ENDIF.
*&---- Close the spool job
CALL FUNCTION 'FP_JOB_CLOSE'
* IMPORTING
* E_RESULT =
 EXCEPTIONS
 usage_error = 1
 system_error = 2
 internal_error = 3
 OTHERS = 4.
IF sy-subrc <> 0.
* <error handling>
ENDIF.
6) Output -
BR.

How to change the Org Data depending on the Person Responsible?

Hi Group,
I have a requirement relating to Org data changing as :
while creating the activities in CRM, by default I was getting the Org data for the person responsible ( whoever has created the Activity ).
there is a provision that, we can change the Person Responsible for the Activity.
and when the Person Resp is changed, the Org data also to be changed accordingly....
But, this was not happening due to some technical reasons....
So please give me some inputs as how to change the Org data according to the changes to the Person Resp.
Thanks in advance.
Regards,
Vishnu.

for this u have to maintain the rules profiles and attach this to transaction type for header or item category
documentaion is there
spro ->MD->org managment ->org data deter -->change rules and profiles

How to change the OraSSO login link in webcache/load balance

Hi
we have 10gAsR1 installed as a Portal instance. We have 6-server
load balancer => webcache as loadbalancer (listening port 80)
Wb ch1 and wb ch2 => webcache (listening port 7777)
portal1 and portal2 => Portal listening 7778
infra =>Infrastruture with repository Portal/Oracle SSO (listening 7777)
This set up is working fine for our intranet setup, now we need to open this for couple of external clients. Well initially we need to open on the load balancer server on port 80 for external team to access, it works fine when we make it publc access.
Now when we need to make it SSO (siteminder) enables, when users click on login link it first goes oracle sso then it internally redirects the page to site minder sso.
Well, I have noted that the sso server details are mentioned in global setting sso/oid details. Since we need to open this for external client we have to add a DNS entry for this so that we can allow its access over firewall..
Now I have made DNS name change at my infrserver level, now I need to update the change at the load balancer server (where wheb chache is running).
Any one know how to chang the URL at load balancer.
I am struck at this point please suggest how should i proceed..
Thanks,

Extract from Personalization Guide - Page Footer - Personalization Considerations
* If you wish to personalize the URL that points to the Privacy Statement for a page that displays a standard Copyright and Privacy (that is, its Auto Footer property is set to true), set the Scope to OA Footer, in the Choose Personalization Context page of the Personalization UI.
* If you wish to personalize the URL that points to the Privacy Statement for a page that displays a custom Copyright and Privacy (that is, its Auto Footer property is set to false), set the Scope to Page in the Choose Personalization Context page of the Personalization UI. In the following Page Hierarchy Personalization page , identify and personalize the Privacy page element.

How to change the privacy statement link url

I looked into the previous threads , could not find the answer to "Changing the privacy statement url to clients privacy statement url".
I am talking about the privacy statement URL in the page that user see it as soon as user logs into the e-business suite.
I have read the previous theads and developers guide regading how to show or hide this autofooter thing. but could not find any thing about how to change the one in the login page.I even looked ino personalization but could not find a place to change this url. please HELP.
Another question is " is it ok to show privacy statement in just the first page and hide it in rest of the application pages?"
Thanks
karan

Extract from Personalization Guide - Page Footer - Personalization Considerations
* If you wish to personalize the URL that points to the Privacy Statement for a page that displays a standard Copyright and Privacy (that is, its Auto Footer property is set to true), set the Scope to OA Footer, in the Choose Personalization Context page of the Personalization UI.
* If you wish to personalize the URL that points to the Privacy Statement for a page that displays a custom Copyright and Privacy (that is, its Auto Footer property is set to false), set the Scope to Page in the Choose Personalization Context page of the Personalization UI. In the following Page Hierarchy Personalization page , identify and personalize the Privacy page element.

How to change the default apex port

hi,
i am installed apex4.0 in EBS R12 DB with HTTP Server method. my apex is running from application server 10g and default port is 7777.
URl: http://hostname:7777/pls/apex
My EBS R12 running on http://hostname:8007.
is it possible to change the apex port to EBS Apache port(8007) in R12 and finally i want to change above URL like this
Before change : http://hostname:7777/pls/apex
After Change : http://hostname:8007/pls/apex
Thanks in advanace....

How to Change the Default SSH Port from Terminal ?
now showing default SSH Port 22 i need change it pls help me how can do

How to change the valution category of the existing material

Similar Messages

Maybe you are looking for