How to check Authentication or WI-FI wireless headset MW600

Hi, please assist me how to check authentication for the headset MW600

There is really no good way to check this either for me or by yourself. I think the best way to find out if it's a authentic MW600 is to have it checked by a repair tech, they should be able to see this. Check with your local support team where your can find your nearest repair center and give them a call.
http://www.sonyericsson.com/cws/corporate/common/contact/phonelist
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

Wireless Headset CECHYA-0086

Hello All,
I have a Sony Wireless Headset model CECHYA-0086. It was designed and bought for use with my PS3, however I have been able to use it with windows. I have not had any luck finding driver or product support for Linux and was wondering if anyone has used this headset/similar headsets and know how I could install it. The wireless headset adapter is a usb stick model CECHYA-0085. Any help would be appreciated. Thank you.

The CECHYA-0086 is the wireless stereo headset for PlayStation 3. PlayStation has a separate community which can be found here. Please visit it for further assistance. Thanks!
If my post answers your question, please mark it as "Accept as Solution"

How do I view the list of wireless routers my ipad has successfully authenticated with, and if possible when the last connection to each was made?

How do I view the list of wireless routers my ipad has successfully authenticated with, and if possible when the last connection to each was made?

The information is of course stored on the device, but currently thee is no way to get to it. It is unknown whether iOS stores the date info for each connection.
As to whether a program can be written, its likely it can, but unlikely it can be done by anyone other than Apple, as by design, 3rd party Apps are not allowed to core system functions like that so its unlikely any App could list your connection history.
As has been said to remove a single connection from the iPad you need to be in range of it, tap the circle on the right side of the router name, and then tap on Forget this network.

I want to run down how dissatisfied I currently am with Verizon Wireless

I want to run down how dissatisfied I currently am with Verizon Wireless; this stated with the pre-order of the iPhones on Friday I like many other customers received the "ecdp" error on the web site and it took 45 minutes to actually be able to place the order. I got the order in and had a 09/19/2014 ship date; spoke with a few Customer Service Reps in various areas such as 611, on many of the 800 numbers available, Internet Orders (including a Supervisor) and even a Social Media Service Rep all who have confirmed this ship date to be accurate.
Well today (09/17/2014) I check the Pre-Order Status page and my date has been changed to 10/14/2014 so I call in to speak to Internet Orders and the Rep advises me that yes my date was pushed back but no reason is supplied, I asked to speak to a Supervisor and was transferred to Howard, Operator # 2431235, who stated that yes the prior rep was accurate and that there was no reason available as to why my ship date changed. Howard continues by stating that as per upper management, Apple reported to Verizon that no iPhone 6+'s would be available at launch for Verizon to ship and that this has been common knowledge, within the company, that the 6+'s were not shipping until 10/14/2014, and that prior Verizon employee's to include supervisors were misinforming me of my shipping date. Howard continued to state that the reason I got the "ecdp" error was because of the company that I work for as Verizon offers a discount so the 'ecdp" error is not something Verizon is currently addressing. Howard then tells me not to worry that with the 10/14 date is a guaranteed delivery date and not to worry, if the phones come in early the order will be filled, I at this point ask Howard to note my account with our conversation to include the fact that he stated the 10/14 was a guaranteed date, at this point he states that while he is telling me this he will not put it in writing as at that point Verizon would be obligated to meet that date at minimum and he was not willing to put his position on the line if the phone is not shipped by that date(this can be confirmed by reviewing the recording of the call as I was advised that I was on a recorded line). I then asked to speak to his supervisor and was told his supervisor went home for the day and that he was the highest level supervisor on at this time. When I then asked for his supervisors contact information to lodge a complaint he said that I would need to call back in on 611 from my handset as Customer Service handles complaints not supervisors.
I did call back and speak with a Representative on 611 who tried to assist but was not able to do much, this rep took my information and is having their supervisor call me to try addressing the way Howard handled the call however this has not occurred at the time of this writing. I did tell this rep that I was honestly considering going to another carrier, (I have been with Verizon 7-8 years and currently have 10 lines of service on my account) I know I will not get the iPhone 6+ on launch day with another carrier which was not the driving factor but rather the way Howard dealt with the situation and the lack of respect that as a customer of Verizon I have always got from other representatives, as you know it takes one person to sour someone on a whole company, Howard even stated that if I want to go to another carrier that was fine with him. However, the Customer Service Rep I spoke with after Howard (I wish I could remember his name) calmed me down not to leave Verizon but did agree that a complaint needed to be filed, personally I would like to file it directly with an Associate Vice President or higher but do understand that there is a “Chain of Command” that needs to be filed
Let this be a warning to anyone who call internet sale and gets Howard, operator #2431235, I would suggest you immediately request a different supervisor that will treat you with respect. As stated above Howard will tell you that the iPhone 6+ was not and has never been available to ship on launch day due to Apple purposely not providing enough units to meet the demand and that Verizon knew this while taking our pre-orders.

I feel your pain Robert. I do believe VZW and Apple knew all along the I6 Plus would not be available on 19 Sep and that it was a way to bolster new contracts, renewed contracts and apple sales stats. It's unfortunate the company wasn't more clairvoyant, most of us would have still pre-ordered but been a little less frustrated.

How to check whether there r new txt files in a folder n file creation date

How to check whether there r new text files in a specified folder and what is the date of creation of the text file.........?

Hi
I have been searching for a solution to find the date of creation of a file for over 6 months now but haven't found it. So I presume that it is not possible though I havent found any authentication of my assumption in any document.
Cheers!
Shailesh

How to check if the user has only the display authority of a message

hi,
How to check if the user has only the display authority of a message but does not have the change authority for a certain message?
Best regards,

hi blake
though i am an application consultant and for authorisation u need to have help of BASIS person if u r not the one but still i can guide u regarding the same,
Basically Authorization Management
Use
You can use the following authorization objects to control the authorizations for maintaining business partner data:
        Authorization objects for the Business Partner:
             B_BUPA_GRP
             B_BUPA_ATT
             B_BUPA_FDG
             B_BUPA_RLT
Authorization objects for relationships:
             B_BUPR_BZT
             B_BUPR_FDG
In addition, you can assign an authorization group to a business partner in the dialog. The authorization group controls which users may maintain data for this business partner.
You can also define authorizations for fields and field groups using the Business Data Toolset (BDT). Depending on the settings you have made, the system carries out the relevant authorization checks.
In the dialog in the SAP GUI, you can display an overview of the authorizations assigned to you by pressing the button Settings.
For more information on authorization management, see the Implementation Guide (IMG) of the Business Partner, as well as in the Developers Handbook for the BDT under Authorizations.
IntegrationAuthorization management for the Business Partner forms part of the SAP authorization concept.
Prerequisites
You have made the necessary settings in Customizing of the Business Partner under Basic Settings--> -Address Management.
Moving over
AS ABAP Authorization Concept
The ABAP authorization concept protects transactions, programs, and services in SAP systems from unauthorized access. On the basis of the authorization concept, the administrator assigns authorizations to the users that determine which actions a user can execute in the SAP system, after he or she has logged on to the system and authenticated himself or herself.
To access business objects or execute SAP transactions, a user requires corresponding authorizations, as business objects or transactions are protected by authorization objects. The authorizations represent instances of generic authorization objects and are defined depending on the activity and responsibilities of the employee. The authorizations are combined in an authorization profile that is associated with a role. The user administrators then assign the corresponding roles using the user master record, so that the user can use the appropriate transactions for his or her tasks.
Authorization Checks
To ensure that a user has the appropriate authorizations when he or she performs an action, users are subject to authorization checks.
The following actions are subject to authorization checks that are performed before the start of a program or table maintenance and which the SAP applications cannot avoid:
        Starting SAP transactions (authorization object S_TCODE)
        Starting reports (authorization object S_PROGRAM)
        Calling RFC function modules (authorization object S_RFC)
        Table maintenance with generic tools (S_TABU_DIS)
Checking at Program Level with AUTHORITY-CHECK
Applications use the ABAP statement AUTHORITY-CHECK, which is inserted in the source code of the program, to check whether users have the appropriate authorization and whether these authorizations are suitably defined; that is, whether the user administrator has assigned the values required for the fields by the programmer. In this way, you can also protect transactions that are called indirectly by other programs.
AUTHORITY-CHECK searches profiles specified in the user master record to see whether the user has authorization for the authorization object specified in the AUTHORITY-CHECK. If one of the authorizations found matches the required values, the check is successful.
Starting SAP Transactions
When a user starts a transaction, the system performs the following checks:
        The system checks in table TSTC whether the transaction code is valid and whether the system administrator has locked the transaction.
        The system then checks whether the user has authorization to start the transaction.
The SAP system performs the authorization checks every time a user starts a transaction from the menu or by entering a command. Indirectly called transactions are not included in this authorization check. For more complex transactions, which call other transactions, there are additional authorization checks.
             The authorization object S_TCODE (transaction start) contains the field TCD (transaction code). The user must have an authorization with a value for the selected transaction code.
             If an additional authorization is entered using transaction SE93 for the transaction to be started, the user also requires the suitable defined authorization object (TSTA, table TSTCA).
If you create a transaction in transaction SE93, you can assign an additional authorization to this transaction. This is useful, if you want to be able to protect a transaction with a separate authorization. If this is not the case, you should consider using other methods to protect the transaction (such as AUTHORITY-CHECK at program level).
        The system checks whether the transaction code is assigned an authorization object. If so, a check is made that the user has authorization for this authorization object.
The check is not performed in the following cases:
You have deactivated the check of the authorization objects for the transaction (with transaction SU24) using check indicators, that is, you have removed an authorization object entered using transaction SE93. You cannot deactivate the check for objects from the SAP NetWeaver and HR areas.
This can be useful, as a large number of authorization objects are often checked when transactions are executed, since the transaction calls other work areas in the background. In order for these checks to be executed successfully, the user in question must have the appropriate authorizations. This results in some users having more authorization than they strictly need. It also leads to an increased maintenance workload. You can therefore deactivate authorization checks of this type in a targeted manner using transaction SU24.
             You have globally deactivated authorization objects for all transactions with transaction SU24 or transaction SU25.
             So that the entries that you have made with transactions SU24 and SU25 become effective, you must set the profile parameter AUTH/NO_CHECK_IN_SOME_CASES to Y (using transaction RZ10).
All of the above checks must be successful so that the user can start the transaction. Otherwise, the transaction is not called and the system displays an appropriate message.
Starting Report Classes
You can perform additional authorization checks by assigning reports to authorization classes (using report RSCSAUTH). You can, for example, assign all PA* reports to an authorization class for PA (such as PAxxx). If a user wants to start a PA report, he or she requires the appropriate authorization to execute reports in this class.
We do not deliver any predefined report classes. You must decide yourself which reports you want to protect in this way. You can also enter the authorization classes for reports with the maintenance functions for report trees. This method provides a hierarchical approach for assigning authorizations for reports. You can, for example, assign an authorization class to a report node, meaning that all reports at this node automatically belong to this class. This means that you have a more transparent overview of the authorization classes to which the various reports are transported.
You must consider the following:
              After you have assigned reports to authorization classes or have changed assignments, you may have to adjust objects in your authorization concept (such as roles (activity groups), profiles, or user master records).
              There are certain system reports that you cannot assign to any authorization class. These include:
              RSRZLLG0
              STARTMEN (as of SAP R/3 4.0)
              Reports that are called using SUBMIT in a customer exit at logon (such as SUSR0001, ZXUSRU01).
              Authorization assignments for reports are overwritten during an upgrade. After an upgrade, you must therefore restore your customer-specific report authorizations.
Calling RFC Function Modules
When RFC function modules are called by an RFC client program or another system, an authorization check is performed for the authorization object S_RFC in the called system. This check uses the name of the function group to which the function module belongs. You can deactivate this check with parameter auth/rfc_authority_check.
Checking Assignment of Authorization Groups to Tables
You can also assign authorization groups to tables to avoid users accessing tables using general access tools (such as transaction SE16). A user requires not only authorization to execute the tool, but must also have authorization to be permitted to access tables with the relevant group assignments. For this case, we deliver tables with predefined assignments to authorization groups. The assignments are defined in table TDDAT; the checked authorization object is S_TABU_DIS.
You can assign a table to authorization group Z000. (Use transaction SM30 for table TDDAT) A user that wants to access this table must have authorization object S_TABU_DIS in his or her profile with the value Z000 in the field DICBERCLS (authorization group for ABAP Dictionary objects).
please See also:
        SAP Notes 7642, 20534, 23342, 33154, and 67766
guess this info will help you,there is one graphic which actually explain the hierarchy of authorisation,i will find some time out to let u know more info about the authorisation
but if u sit with ur BASIS guy then u can learn lot of things in PFCG
i guess u r a basis guy,then its not a problem
best regards
ashish

In my macbookpro airport showing as uninstalled. How do I install and will belkin wireless USB adaptor support in macbokpro software version 10.6.8. Where do I download driver for the same

In my macbookpro airport showing as uninstalled. How do I install and will belkin wireless USB adaptor support in macbokpro software version 10.6.8. Where do I download driver for the same

jeanfromisle-arné wrote:
I'm new to MacBook Pro.
My system is Mac OS X v.10.6.8.
I used to work on my 3000 photos with GIMP on a P.C, but since I had a breakdown, I would like to carry on on my Mac as soon as possible.
Figuring out unaided a new OS after a breakdown is the best prescription for another breakdown.
Before going back to editing your photos, I suggest you need to familiarise yourself with your new OS. Get a book (eg, David Pogue's "Missing Manual…") -- now, that Lion's been out and about for some time, you can probably get the Snow Leopard (aka Mac OS X v10.6) edition at a discount. Take the time to read it and understand it, and you'll spare yourself a mountain of frustration. There are enough similarities between Mac OS X and Windows to fool you into believing almost everything works the same way, when, of course, it doesn't -- many similarities are only skin-deep.
Once you've done that, you'll be in a better position to install and use GIMP or look for alternatives.
where do I find the exact version (in french)
For French issues, you are probably better off checking the forums on MacBidouille or MacGeneration.

How to check cisco CCX version on WRT610N?

I would like to know if my wireless router belong to CCX which version.
Anybody here know how to check?

Well, your router set-up will not tell you the CCX version information...However, if you give some more details, I could be helpful...

How many web authentication users do 2125 support?

when 2125 use local database for web authentication. how many web authentication users do 2125 support?

thank you very much!!
醉生梦死谁成气,拓马长枪定乾坤
Date: Fri, 19 Aug 2011 01:10:43 -0600
From: [email protected]
To: [email protected]
Subject: - Re: how many web authentication users do 2125 support?
Cisco Support Community
Re: how many web authentication users do 2125 support? created by pcroak in Getting Started with Wireless - View the full discussion
Hello Yuliang,
The maximum number of local database accounts that could be created is 2048. You can configure the size of the local database with the command:
config database size <512-2048>
NOTE: This local database count is shared between the following entries:
MAC filters (clients)
AP MIC/SSC (AP authorization list)
Dynamic Interfaces
Management users
Local net users
Excluded Clients
If you are asking about the number of simultaneous wireless clients, I believe the 2125 supports 350 active wireless clients.
-Patrick Croak
Wireless TAC
Reply to this message by going to Cisco Support Community
Start a new discussion in Getting Started with Wireless at Cisco Support Community

The database structure has been modified - how to check if it happend?

Hello,
I have a question. How to check if the database structure has been modified? I know that there is shown a messagebox after creating table and adding some fields, but sometimes this message appear after some seconds. The problem is that I want to create table and UDO for this table, and until database structure is not modified I got an error message. If I wait and DB strucuture modifies then UDO is creating correctly.
My question is - does anyone know how to check if database structure has been modified?
Regards,
Hmg

Hi Szymon,
I guess you are stuck up in a kinda scenario, where in, you will be populating a form with values, before the structure modifies, if this is going to be your problem, I can help you out with a work around.
In the beginning of the process, before the creation of the UDO or tables, set a boolean value to false, and once all UDO's and Tables are created, only then, should you make it true and only after the boolean becomes true, you should proceed with populating the values from the screen.
I really ament sure what your problem is, but one of my guys faced this problem, I then, thought even you might have a similar problem.
Satish.

How to check connection from SAP to reservation system?

Dear Experts,
May I know how to check whether the connection between SAP and the reservation system has been set up and ready to use?
Thanks.

Hi
You need to check the identification code issued to the enterprise by AMADEUS must be entered in the R/3 Customizing for Travel Planning under Master Data u2192 Control Parameters for Travel Planning u2192 Define sales offices and Define API access parameters.
External reservation system In the Travel Planning subcomponent Travel Management accesses an external reservation system connected to R/3 to carry out the queries on available travel services and to book the selected services. The reservation system currently available is the AMADEUS Global Travel Distribution system.
For more information, see Technical Prerequisites for Travel Planning--
Technical Prerequisites for Travel Planning
Before you can use Travel Planning fully, a number of internal R/3 and external prerequisites or settings must be fulfilled.
Connection to an External Reservation System
The online booking function in Travel Planning is based on the cooperation with external reservation systems that are used to communicate with the service providers. The R/3 user has access to the following functions via the connection to an external reservation system:
u2022 Availability query of travel services
u2022 Transfer of additional information about selected travel services
u2022 Price information
u2022 Processing of reservation by the respective provider
u2022 Synchronization of the data in SAP Travel Planning if external booking changes have been made
In the current release the external reservation system in use is AMADEUS Global Travel Distribution. AMADEUS is a subsidiary of Lufthansa, Air France, Continental Airlines and Iberia. The reservation system it provides is in worldwide use and 160,000 terminals in 37,000 travel agencies and ticket sales centers in over 130 countries are connected to it.
In order to carry out online booking via AMADEUS the following must have been carried out:
u2022 Your enterprise must have signed an agreement with AMADEUS for the use of the interface and be registered at AMADEUS with a user ID
u2022 A network connection to the AMADEUS computer center must have been opened
u2022 The identification code issued to the enterprise by AMADEUS must be entered in the R/3 Customizing for Travel Planning under Master Data u2192 Control Parameters for Travel Planning u2192 Define sales offices and Define API access parameters.
For questions about registration, contact the SAP & AMADEUS Competence Center:
SAP & AMADEUS Competence Center ACC 02 Neurottstrasse 16 69185 Walldorf Germany
Cheers
Mukta

How to check SSO user from database?

Hi:
I've posted this topic in Forms forum:
How to check SSO user from database?
then as I've been told, it's better to post it here, so ...... here is the question:
I'm writing a "before delete trigger" to insert into log table before delete. Is there a way that I know from database the current SSO user when SSO users share one database user?
Just like in Oracle Application Express there is v('APP_USER') to know the current user.
Saad,

End users are manipulating data through Oracle Forms(and SSO through portal) and the thing I need is to trace the SSO username from database without modifying forms, I mean purely from database taking into consideration that SSO users are sharing one database user. Is it possible?
Saad,

How to check if all values from a dataset has come to an internal table

How to check if all values from a dataset has come to an internal table ?

Hi,
After OPEN DATASET statement check if sy-subrc = 0 if its success then proceed with split statement and save the dataset values into a internal table and while debugging the internal table you will find that whether all values get into internal table.
Checking sy-subrc after OPEN DATASET statement is must to fill up the values in the internal table.
For e.g.
OPEN DATASET p_inpfile FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
    WRITE :/ 'No such input file' .
    EXIT.
ELSE.
READ DATASET p_inpfile INTO loc_string.
      IF sy-subrc NE 0.
        EXIT.
      ELSE.
        CLEAR loc2.
*Spliting fields in the file-
        REPLACE ALL OCCURRENCES OF '#' IN wa_string WITH ' '.
       SPLIT wa_string AT const INTO loc2-pernr
                                       loc2-werks
                                       loc2-persk
                                       loc2-vdsk1.
Hope you get some idea.
Thanks,
Sakthi C

How to connect my iphone to a wireless speaker

how to connect my iphone to a wireless speaker logitech Z515

Are you trying to connect over Bluetooth?
Matt
Message was edited by: Matthew Morgan

How to connect my i phone to wireless printer

how to connect my i phone to wireless printer

You would have to have one of the few HP printers that support airprint:
iOS: AirPrint 101
Or you could find an app that provides this feature.

How to check Authentication or WI-FI wireless headset MW600

Similar Messages

Maybe you are looking for