How to check connectivity of OCFS2 nodes?

Hi,
I was trying to setup OCFS2 over ISCSI on OVM server 2.3. By a mistake I didn't setup iptable of one node correctly, however, "service o2cb status" reported everything well on each node.
I was wondering if there are any tools can detect such issue? I finally found this issue by checking iptable rules before that mount worked except changes I made on one node was not visible to another. I went through various OCFS2 documents, no luck. thanks.

Frank wrote:
I was trying to setup OCFS2 over ISCSI on OVM server 2.3. By a mistake I didn't setup iptable of one node correctly, however, "service o2cb status" reported everything well on each node. There is no OVM 2.3. The latest is 2.2.2. Also, iptables is configured properly on installation for ocfs2, so I'm assuming you're changing the default iptables rules?
I was wondering if there are any tools can detect such issue? I finally found this issue by checking iptable rules before that mount worked except changes I made on one node was not visible to another. I went through various OCFS2 documents, no luck. thanks.o2cb is the cluster heartbeat tool, not the cluster filesystem itself. Oracle VM is designed to self-configure the cluster as servers join/leave the pool, so changing the iptables rules is not recommended.

Similar Messages

  • How to check connection from SAP to reservation system?

    Dear Experts,
    May I know how to check whether the connection between SAP and the reservation system has been set up and ready to use?
    Thanks.

    Hi
    You need to check the identification code issued to the enterprise by AMADEUS must be entered in the R/3 Customizing for Travel Planning under Master Data u2192 Control Parameters for Travel Planning u2192 Define sales offices and Define API access parameters.
    External reservation system In the Travel Planning subcomponent Travel Management accesses an external reservation system connected to R/3 to carry out the queries on available travel services and to book the selected services. The reservation system currently available is the AMADEUS Global Travel Distribution system.
    For more information, see Technical Prerequisites for Travel Planning--
    Technical Prerequisites for Travel Planning
    Before you can use Travel Planning fully, a number of internal R/3 and external prerequisites or settings must be fulfilled.
    Connection to an External Reservation System
    The online booking function in Travel Planning is based on the cooperation with external reservation systems that are used to communicate with the service providers. The R/3 user has access to the following functions via the connection to an external reservation system:
    u2022 Availability query of travel services
    u2022 Transfer of additional information about selected travel services
    u2022 Price information
    u2022 Processing of reservation by the respective provider
    u2022 Synchronization of the data in SAP Travel Planning if external booking changes have been made
    In the current release the external reservation system in use is AMADEUS Global Travel Distribution. AMADEUS is a subsidiary of Lufthansa, Air France, Continental Airlines and Iberia. The reservation system it provides is in worldwide use and 160,000 terminals in 37,000 travel agencies and ticket sales centers in over 130 countries are connected to it.
    In order to carry out online booking via AMADEUS the following must have been carried out:
    u2022 Your enterprise must have signed an agreement with AMADEUS for the use of the interface and be registered at AMADEUS with a user ID
    u2022 A network connection to the AMADEUS computer center must have been opened
    u2022 The identification code issued to the enterprise by AMADEUS must be entered in the R/3 Customizing for Travel Planning under Master Data u2192 Control Parameters for Travel Planning u2192 Define sales offices and Define API access parameters.
    For questions about registration, contact the SAP & AMADEUS Competence Center:
    SAP & AMADEUS Competence Center ACC 02 Neurottstrasse 16 69185 Walldorf Germany
    Cheers
    Mukta

  • How to check Connectivity between ECC 6.0 and AS2

    Hi all
    We are having a scenario of  connecting an ECC 6.0 with an MDM GDS system through XI .Can we check the settings without doing a proper scenario?As we don't have the details of the Idocs as yet.

    Hi,
    Check with these
    /people/harrison.holland5/blog/2006/12/20/xi-configuration-for-mdm-integration--sample-scenario
    /people/balas.gorla/blog/2006/09/27/mdm-xi-r3-integration
    /people/balas.gorla/blog/2007/02/05/r3-xi-mdm-outbound-scenario
    /people/sriram.vasudevan3/blog/2005/09/01/mdm-55-data-distribution-using-sap-xi
    /people/kamaljeet.kharbanda/blog/2005/09/14/sap-netweavercomplete-information-integration-platform
    Regards
    Seshagiri

  • How to check maximum number of connection ?

    Hi Guru's,
    How to check maximum number of connections for sender/receiver interface and for RFC's?
    regards
    Vinay

    Hello Vinay,
    I am not sure if your answer is as simple and straight forward as i think it is. Please see my Reply as below and let me know if you need any further details:
    1. How to check connections for RFC in sap pi: Goto the RFC Communication Channel that you are using and there is an option that says "Maximum Connections" that will tell you the max connections allowed .
    2. Max connection to service interface: I did not get which exact component or object you are asking about  (in context to PI) ?
    Regards,
    Tarik Parkar

  • Check whether there is nodes inside a xml node

    I am trying a few different way, but i can't get the point,
    hope some expert can help me on this.
    eg:
    <product>
    <item>
    </item>
    </product>
    <cfscript>
    <!--- after xml parse to xmlElement --->
    if (xmlElement.product.item neq ""){
    writeOutput(xmlElement.product.item[1]);
    But this wont work for me, anyone know how to check whether a
    xml node contains child nodes or not?

    xmlSearch()?
    Adam

  • How to check the load balancing in Oracle 11gR2 2 node RAC

    Dear All,
    Can any one please assist me how to check whether the incoming connections are evenly distributing across the nodes..?
    We have two nodes, when we check the sessions counts in both nodes, Most of the time we could see node -1 has more no of sessions than node-2..? So just wanted to know whether load balancing is happening or not ...? If not how to enable it and distribute the incoming connections evenly..?
    Oracle 11gR2 / RHEL5

    SQL> select inst_id,count(*) from gv$session where username is not null group by inst_id;
    INST_ID COUNT(*)
    1 43
    2 40
    Not sure how to check the users are connecting through scan or not ..? But below are scan setttings...
    SQL> !srvctl config scan_listener
    SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1521
    SCAN Listener LISTENER_SCAN2 exists. Port: TCP:1521
    SCAN Listener LISTENER_SCAN3 exists. Port: TCP:1521
    SQL> !srvctl status scan_listener
    SCAN Listener LISTENER_SCAN1 is enabled
    SCAN listener LISTENER_SCAN1 is running on node za-rac-prd-02
    SCAN Listener LISTENER_SCAN2 is enabled
    SCAN listener LISTENER_SCAN2 is running on node za-rac-prd-01
    SCAN Listener LISTENER_SCAN3 is enabled
    SCAN listener LISTENER_SCAN3 is running on node za-rac-prd-01
    SQL> !srvctl config scan
    SCAN name: rac_prd.abc.local, Network: 1/10.100.130.0/255.255.255.192/eth6.64
    SCAN VIP name: scan1, IP: /rac_prd.abc.local/10.100.130.55
    SCAN VIP name: scan2, IP: /rac_prd.abc.local/10.100.130.54
    SCAN VIP name: scan3, IP: /rac_prd.abc.local/10.100.130.53
    SQL>

  • How to check R3 system connected to BI system

    Hi to all,
    I am installing BI contents , But before installing the Contents , in need to check which source system (R3)  is connected to BI.
    Please can any body tell me .
    How to check it.
    Regards
    Pavneet Rana

    Hi Rana,
    In RSA1 screen select source system option in the modelling area.
    Right click on the source system(for ex: D10client100) --> select "Check" from the context menu.
    It will display message if there is any thing wrong.
    second method
    If you have authorizations you can goto SM59 Tcode: drill down the ABAP connections ->check for your source system
    double click on it
    it will take you to "RFC destination screen" here you need to click on connection test.
    IT will display the test results.
    Regards
    KP
    Edited by: prashanthk on Aug 10, 2010 6:05 AM

  • How to check whether java.sql.Connection has been dropped or not

    Hi,
    How can i check whether the connection is dropped from the database or not by using java.sql.Connection API.
    Thanks

    There's a few ways to check Connections, each with a different use:
    (1) conn.isOpen()
    (2) conn == null
    (3) the last one is a little more involved and adds some overhead. You can run SELECT 1 FROM dual; (Oracle) or SELECT 1 (MSSQL) and check for exceptions.
    The only way to check a connection, as far as I know, is to use it. That said, there must be a better way???

  • How To check in Ironport log which is server is giving bad response to SMTP connection?

    How To check in Ironport log which is server is giving bad response to SMTP connection?

    You probably want to create a new log subscription for "SMTP Logs"
    Go to System Administration/Log Subcriptions.
    Click Add Log Subscription
    Pick SMTP Conversation Logs.
    Pick a log name (will be the folder name that gets created for the log files)
    The defaults for the rest should be fine... maybe tweak rollover...
    Make sure to remove it after you're done, its going to eat space and probably a little proc... its VERY verbose, but it should show you what you need.

  • How to check how many source systems are connected to my BW system?

    Hi friends
    how to check how many source systems are connected to my BW system?
    Regards
    BN

    Hi All,
    Thanks a lot for your help. its resolved now with your help.
    Regards
    BN

  • How to Check source systems in RSA1 and verify that connections are working

    How to Check source systems in RSA1 and verify that connections are working ok and how to Check Planning Area have green status.................

    Hi,
    In rsa1, go to 'Tools' and option 'Manage Source System' - the screens are self explanatory there after. To check the planning areas, go to transaction /SAPAPO/MSDP_ADMIN anc check the status of the relevant planning areas.
    Regards
    Vinod

  • How to check a network connected system is in power on?

    How to check whether a network connected system is in power on through its ip address? Is there a simple way in java to check that?
    Thanks

    How to check whether a network connected system is in
    power on through its ip address? Is there a simple
    way in java to check that?If you know that it normally has a server listening on a given port, then you can try to establish a connection on that port.
    If the connection succeeds, it's powered on.
    If the connection fails, you cannot know whether it's powered on or not. It may be on, but the server isn't running. It may be on with server running but the network path to that host may have a problem. It may be on, server running, good network path, etc., but the server may be very busy and the connection attempt may timeout. etc.

  • How to check whether a node exist in a Particular Level. (xmltype)

    hi,
    please help me to check whether a particular node exists in one level.
    for eg
    I have the following xml
    <map>
         <entry>
              <key>
                   heading1
                   </key>
              <map>
                   <entry>
                        <key> sub1 heading1</key>
                        <value> sub1 heading1 value  </value>
                   </entry>
                   <entry>
                        <key> sub2 heading1 </key>
                        <value> sub2 heading1 value  </value>
                   </entry>
              </map>
         </entry>
         <entry>
              <key>
                   heading2
                   </key>
              <map>
                   <entry>
                        <key> sub1 heading2</key>
                        <value> sub1 heading2 value  </value>
                   </entry>
                   <entry>
                        <key> sub2 heading2 </key>
                        <value> sub2 heading2 value  </value>
                   </entry>
              </map>
         </entry>
    </map>i need to check how many heading exists in this xml.
    I am checking like
            i:=1;
         l_section := ip_xml.extract('//map/entry');
         WHILE l_section.existsnode('entry[' || i|| ']') = 1 LOOP
              // extract the key name within entry tag
                  // print the key name.
    i:=i+1;
         end loop;but iam getting all the key name like
    heading1
    sub1 heading1
    sub2 heading1
    heading2
    sub1 heading2
    sub2 heading2
    I need only heading1 and heading2. how can I check whether a particular node exist in particular level.
    first level , second level etc. Please help

    but iam getting all the key nameThat's because you're using a descendant axis : //map/entry
    SQL> DECLARE
      2 
      3   ip_xml  xmltype := xmltype('<map>
      4       <entry>
      5            <key>
      6                 heading1
      7                 </key>
      8            <map>
      9                 <entry>
    10                      <key> sub1 heading1</key>
    11                      <value> sub1 heading1 value  </value>
    12                 </entry>
    13                 <entry>
    14                      <key> sub2 heading1 </key>
    15                      <value> sub2 heading1 value  </value>
    16                 </entry>
    17            </map>
    18       </entry>
    19       <entry>
    20            <key>
    21                 heading2
    22                 </key>
    23            <map>
    24                 <entry>
    25                      <key> sub1 heading2</key>
    26                      <value> sub1 heading2 value  </value>
    27                 </entry>
    28                 <entry>
    29                      <key> sub2 heading2 </key>
    30                      <value> sub2 heading2 value  </value>
    31                 </entry>
    32            </map>
    33       </entry>
    34  </map>');
    35 
    36  BEGIN
    37 
    38    for r in (
    39      select heading, headno
    40      from xmltable( '/map/entry/key'
    41                     passing ip_xml
    42                     columns heading varchar2(30) path '.'
    43                           , headno  for ordinality )
    44    )
    45    loop
    46      dbms_output.put_line('Heading '||r.headno||' = '||r.heading);
    47    end loop
    48    ;
    49 
    50  END;
    51  /
    Heading 1 =
                   heading1
    Heading 2 =
                   heading2
    PL/SQL procedure successfully completed

  • How to check connector connectivity in OIM 11g

    Hi All,
    How to check connector connectivity in OIM 11g. In erlier version we have XIMDD from where we can test connectivity. But I dont see anything in 11g.
    Thanks.

    Noway ! !
    Go to:
    *<Oracle-Weblogic-Middleware-Home>\Oracle_IDM\server\features\Xellerate.zip* & you can find the XIMDD.war

  • How to Check when the user is connected to different desktop.

    How to Check when the user is connected to different desktop.Sometimes the user maynot see the theme in the personalize theme list. In that case the person must be using different kind of desktop.How to check, I need a path.And how to apply the theme to that user?
    Thanks,
    Paturi

    Hi,
    you can create the new portal desktop from
    System Administration => Portal display => Desktop and Display Themes
    Select your folder from Portal Content and from its context create new Desktop.
    Add The Framework page and the theme to this desktop page.
    Go to your folder from Portal Content and from the context of the framework page select add framework page to portal desktop.
    Adding Theme to desktop
    From Portal content select Theme folder and select the theme right click it and select Add theme to Portal Desktop.
    Create rule for the Desktop.
    Navigate to System Administration => Portal Display => Desktop and Display Themes Portal Content => Portal Administrators => Super Administrators =>main_rules.
    Click Add IF Expression.
    create the expression if user = xyz then click on apply
    Select the then clause of the if and navigate to your folder where Desktop is created ,Add it and Click Apply.
    Save the Changes to the rule.
    Hope it helps you.
    (reward points if its helpful)
    Thanks,
    Gunjan

Maybe you are looking for

  • The best way to insert values in a Nested Table

    Hi! I want to insert values from a SQL-query in a Nested Table.What's the best way to do it? In addition,the only way that I've found is doing a query and when I've got the query result I insert it into the Nested Table.For instance: FOR cur_row IN (

  • RMBP HDMI PORT

    I just recently bought a Samsung 3D tv 2013 model. I tried connecting my rMBP to the Samsung via HDMI 1.4. Questions: 1. Why does the refresh rate in the rMBP is only 60hz? There is no option for 120hz? Why is that? 2. Is this the tv or is it a probl

  • Can't write to desktop. I get Error Code -36.

    I recently had a battery problem where my black MacBook unexpected powered off in the middle what I was doing. After restart, I noticed right away that the desktop image was different, and I couldn't change it. A call to Apple got my battery replaced

  • Emailing photos as an attachment issue with yahoo

    First off new to the forum and I apologize if this has been covered somewhere, however I have searched for the last two hours through tons of posts and haven't found any solution. I am using yahoo mail and when I tap on the email picture, it places t

  • Oute Join and Inner Join

    Hi, I need to join three tables, based on some conditions (EKPO, EKBE and EKKN Note: All PO line items from EKPO will have a movement associated in the EKBE Table. Capture all PO line items where no matches found in the EKPO-EKBE join) for the above