How to check databases in the server

how can i check the databases that are available in the oracle using sql commands

Madhu, you cannot get list of all databases using sql.
Because when you use sql , you connect to only one database at that time.
And using sql you can only get the name of the database to which you are connected.
One solution is to look at the services on the control panel of the database server.
it will list you all the instance available on the server.

Similar Messages

The security database on the server does not have a computer account for this workstation trust relationship

When I try to log on to my DC it says "The security database on the server does not have a computer account for this workstation trust relationship". It won't let me log on. I installed another server server 2012r2 (its virtual )
and I can get to ADSI edit.
I think what happened was I had a pc that could not connect without unplugging the network cable. So I found this fix
FIX: “The security database on the server does not have a computer account for this workstation trust relationship”2032011
I’ve seen a lot of solutions, or suggestions rather, with regard to the error in the title of this post. In my experience, the problem can almost always be resolved without extra domain add/removes and reboots, which is the most prevalent solution I have
seen around. Usually, this issue is due to a mismatch between attributes of the computer account in Active Directory and those values on the system itself. Here are the steps I take to fix this issue when it crops up:
Open up Active Directory Users & Computers pointed to the domain the computer account resides in
From the “View” pull-down menu, make sure that “Advanced Features” is checked
Navigate to the part of your organizational unit (OU) structure where the computer account for this server resides
Open the Properties for the computer object
Choose the “Attribute Editor” tab on the Properties dialog box
Check the Attributes dNSHostName & servicePrincipalName – anywhere that a fully qualified hostname is specified (e.g. myserver.mydomainname.com), make sure that the entry matches the hostname
you have configured when you go here on your server: Start -> Computer -> Right-Click, Properties -> Change Settings (under “Computer name, domain… settings”) -> Full Computer Name
As an example, for a fictitious W2K8 R2 server whose Full Computer Name is “srv1.mydomainname.com”, these attribute/value pairs should be in Active Directory:
dNSHostName:
srv1.mydomainname.com
servicePrincipalName:
HOST/SRV1
HOST/srv1.mydomainname.com
RestrictedKrbHost/SRV1
RestrictedKrbHost/srv1.mydomainname.com
TERMSRV/SRV1
TERMSRV/srv1.mydomainname.com"
Not reading it carefully I add a computer with the same name as the pc having the issue and followed the above. The problem is that I did not notice that the spn did not want the name of my server (serv1) but the name of the trouble
pc.
dcdiag output
PS C:\Users\administrator.TOM> dcdiag.exe
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
***Error: DC3 is not a Directory Server. Must specify /s:<Directory Server> or /n:<Naming Context> or nothing to
use the local machine.
ERROR: Could not find home server.
PS C:\Users\administrator.TOM> dcdiag.exe /s:DC2
Directory Server Diagnosis
Performing initial setup:
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site\DC2
Starting test: Connectivity
The host 9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM could not be resolved to an IP address. Check the DN
server, DHCP, server name, etc.
Neither the the server name (DC2.TOM) nor the Guid DNS name (9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM)
could be resolved by DNS. Check that the server is up and is registered correctly with the DNS server.
Got error while checking LDAP and RPC connectivity. Please check your firewall settings.
......................... DC2 failed test Connectivity
Doing primary tests
Testing server: Default-First-Site\DC2
Skipping all tests, because server DC2 is not responding to directory service requests.
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : TOM
Starting test: CheckSDRefDom
......................... TOM passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... TOM passed test CrossRefValidation
Running enterprise tests on : TOM
Starting test: LocatorCheck
......................... TOM passed test LocatorCheck
Starting test: Intersite
......................... TOM passed test Intersite
PS C:\Users\administrator.TOM> regsvr32 schmmgmt.dll
PS C:\Users\administrator.TOM> netdig /fix
netdig : The term 'netdig' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ netdig /fix
+ ~~~~~~
+ CategoryInfo : ObjectNotFound: (netdig:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> Setup /PrepareSchema
Setup : The term 'Setup' is not recognized as the name of a cmdlet, function, script file, or operable program. Check
the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ Setup /PrepareSchema
+ ~~~~~
+ CategoryInfo : ObjectNotFound: (Setup:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> netdiag /test
netdiag : The term 'netdiag' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ netdiag /test
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (netdiag:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> nslooup
nslooup : The term 'nslooup' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ nslooup
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (nslooup:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM>

Ok fixed.
At a elevated cmd prompt run ;
C:\Users\administrator.TOM>setspn -x
As you can see the DC serv1 had duplicate SPNs.
Checking domain DC=TOM
Processing entry 1
HOST/serv1.TOM is registered on these accounts:
CN=SERV1,OU=Domain Controllers,DC=TOM
CN=C00049,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/TOWN-HBWJ29ZOQC is registered on these ac
counts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/town-hbwj29zoqc.TOM is registered on thes
e accounts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
RestrictedKrbHost/serv1 is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
RestrictedKrbHost/serv1.TOM is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
found 5 groups of duplicate SPNs.
Went to the computers OU and changed computer c00049 to the correct SPN. Now I have a new issues, I'll start a new thread.

How to repair database using SQL server 2008 and C#

How to repair database in SQL server 2008 using C#
Musakkhir Sayyed.

Unfortunately your post is off topic as it's not specific to SQL Server Samples and Community Projects.
This is a standard response I’ve written in advance to help the many people who post their question in this forum in error, but please don’t ignore it. The links I provide below will help you determine the right forum to ask your
question in.
For technical issues with Microsoft products that you would run into as an end user, please visit the Microsoft Answers forum ( http://answers.microsoft.com ) which has sections for Windows, Hotmail,
Office, IE, and other products.
For Technical issues with Microsoft products that you might have as an IT professional (like technical installation issues, or other IT issues), please head to the TechNet Discussion forums at http://social.technet.microsoft.com/forums/en-us, and
search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), please head to the MSDN discussion forums at http://social.msdn.microsoft.com/forums/en-us, and
search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here: http://community.dynamics.com/
If you think your issue is related to SQL Server Samples and Community Projects and I've flagged it as Off-topic, I apologise. Please repost your question and include as much detail as possible about your problem so that someone can assist you further.
If you really have no idea where to post your question please visit the Where is the forum for…? forum http://social.msdn.microsoft.com/forums/en-us/whatforum/
When you see answers and helpful posts, please click Vote As Helpful,
Propose As Answer, and/or Mark As Answer
Jeff Wharton
MSysDev (C.Sturt), MDbDsgnMgt (C.Sturt), MCT, MCPD, MCSD, MCSA, MCITP, MCDBA
Blog: Mr. Wharty's Ramblings
Twitter: @Mr_Wharty
MC ID:
Microsoft Transcript

How to change language of the server monitor ?

hi all,
How to change language of the server monitor ? i got it in japanese and would like to turn it into English.
Thx for your help,

We use japanese strings only when your server locale has "jp": FindNoCase("Japan", GetLocale()) NEQ 0. So you may not be able to individually change server monitor's flash client, but there are two ways to change it back to english on server level
1) Check your server locale and change it to anything but japanese.
2) Rename smresource_en.xml to smresource_jp.xml in CFIDE\administrator\monitor (take a back up).
Thanks,
Chandan Kumar

Security database on the server doesn't have a computer account for this workstation trust relationship

Hi,
in our windows server 2008 R2 standard , we are facing this error "Security database on the server doesn't have a computer account for this workstation trust relationship " on an regular basis. we have did below mentioned teps to solve the issue
1. Disjoin the system from Domain & joined it again.
2. tested the computer secure channel connection.
3. checked the DNS settings of server
4.checked the computer account in AD which disabled or not.
Everything was ok but after doing changes again after 2 - 3 days we are facing same error message.
Please help to sort the issue on an urgent basis.

When the error happen, can you check the computer account in your AD's console (with advanced feature at on), to check the date it was updated and if the SID is the same ? (objectSID and pwdLastset)
I guess someone try to domain join a computer with the same name, and flush your computer account at the same time.
Regards, Philippe
Don't forget to mark as answer or vote as helpful to help identify good information. ( linkedin endorsement never hurt too :o) )
Answer an interesting question ? Create a
wiki article about it!

Need to know how to calculate and allocate the server side bandwidth between two exchange sites for DAG replication

Hi All,
Please have a look in to the below mentioned environment.
primary site :SITE 1
server 1
server 2
secondary site :SITE 2
server 3
Note : All the above three servers are in single DAG .All the database are mounted on the server (server 1) which is located in the primary site (I.E SITE 1).
On that 5 databases we are having 3500 users .Based on the user designation we have allocated the mailbox size.
Query : Each and every day we are having the large no copy queue length for all the five databases to the server located in SITE 2.
Please help me out on this and also tell me is there any tool available to exactly get the required bandwidth for the exchange servers located between the active directory sites.
Thanks & Regards S.Nithyanandham

I don't know of any tool that can calculate things for you but latency is the biggest thing you have to worry about. The other issues is looking at the network gear between the 2 sites. I have seen many times were switches get maxed out if they are set to
1 GB or even ports getting maxed out and need to bonded for more throughput. Test your latency from the edge of each site then test it within to see if there is a difference.
Regardless of their geographic location relative to other DAG members, each member of the DAG must have round trip network latency no greater than 500 milliseconds between each other member.
As the round trip latency between two Mailbox servers hosting copies of a database increases, the potential for replication not being up to date also increases. Regardless of the latency of the solution, customers should validate that the networks between
all DAG members is capable of satisfying the data protection and availability goals of the deployment. Configurations with higher latency values may require special tuning of DAG, replication, and network parameters, such as increasing the number of databases
or decreasing the number of mailboxes per database, to achieve the desired goals.
Round trip latency requirements may not be the most stringent network bandwidth and latency requirement for a multi-datacenter configuration. You must evaluate the total network load, which
includes client access, Active Directory, transport, continuous replication, and other application traffic, to determine the necessary network requirements for your environment.
http://technet.microsoft.com/en-us/library/dd638104(v=exchg.150).aspx
DJ Grijalva | MCITP: EMA 2007/2010 SPA 2010 | www.persistentcerebro.com

How to check what is the full name of the installer is used?

Hi,
how to check what is the full name of the installer is used?
Thanks,

Very nice, but assuming you did deliberately fire the installer, don't you remember the command? Apart from that your question has (as usual) no version and no platform and no context. If you are still in the installer and using any variant of Unix you can very easily run 'ps' to see the exact command.
You would have needed to provide platform and version information when submitting the SR. Can you explain why you have this forum guess at it?
Sybrand Bakker
Senior Oracle DBA

How to check what are the enhancement done for MIRO transaction

Hi Experts,
Please help me out, how to check what are the enhancement done for MIRO transaction.
Thanks in advance.
Thanks,
Basanagouda

Hi
Use the BADI
Please refer these documents: [Enhancements required in MIGO|Enhancements required in MIGO; and
[Enhancement in MIGO for Goods Movement|Enhancement in MIGO for Goods Movement;
Hope this helps!!
Regards
Vijay

The content database on the server is temporarily unavailable while deploying a app

HI,
I got the following error while deploying a app. I have not added any logic in App.
What i have tried yet:
1. Configured Server for Using App
2. Added permission to user2 (app developer account by which i open VS 2012) as mentioned in following URL
http://community.zevenseas.com/Blogs/Akhilesh/Lists/Posts/Post.aspx?ID=10
Please let me know if anyone have faced and resolved it before....
Here we go .............................
Active Deployment Configuration: Deploy App for SharePoint
Skipping deployment step because a pre-deployment command is not specified.
Skipping the uninstall step because the app for SharePoint is not installed on the server.
Install app for SharePoint:
Uploading the app for SharePoint...
Installation is in progress (00:00:00)
Installation is in progress (00:00:01)
Installation is in progress (00:00:02)
Installation is in progress (00:00:03)
Installation is in progress (00:00:04)
Installation is in progress (00:00:05)
App failed to install, cleaning up...
App installation cleanup failed due to errors. Please see the app on the SharePoint site’s “Site Contents” page for details.
App installation encountered the following errors:
11/19/2013 2:42:13 PM
@"Error 1
CorrelationId: e6d878ab-ae8b-442c-90c1-ee989f5e719b
ErrorDetail: The content database on the server is temporarily unavailable.
ErrorType: Transient
ErrorTypeName: Intermittent
ExceptionMessage: System.IO.FileNotFoundException: <nativehr>0x80070002</nativehr><nativestack></nativestack>
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetMetadataForUrl(String bstrUrl, Int32 METADATAFLAGS, Guid& pgListId, Int32& plItemId, Int32& plType, Object& pvarFileOrFolder)
at Microsoft.SharePoint.Library.SPRequest.GetMetadataForUrl(String bstrUrl, Int32 METADATAFLAGS, Guid& pgListId, Int32& plItemId, Int32& plType, Object& pvarFileOrFolder)
at Microsoft.SharePoint.SPWeb.GetList(String strUrl)
at Microsoft.SharePoint.Administration.SPDeveloperData.AddToDraftApps(Guid appInstanceId)
at Microsoft.SharePoint.Lifecycle.FinalFixupTask.Deploy()
at Microsoft.SharePoint.Administration.SPAppTask.DeployOperation()
at Microsoft.SharePoint.Lifecycle.MonitoredTaskExecution.DoTask()
Source: Finalization
SourceName: App Deployment Finalization
@"Error 2
CorrelationId: e6d878ab-ae8b-442c-90c1-ee989f5e719b
ErrorDetail: The content database on the server is temporarily unavailable.
ErrorType: Transient
ErrorTypeName: Intermittent
ExceptionMessage: System.IO.FileNotFoundException: <nativehr>0x80070002</nativehr><nativestack></nativestack>
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetMetadataForUrl(String bstrUrl, Int32 METADATAFLAGS, Guid& pgListId, Int32& plItemId, Int32& plType, Object& pvarFileOrFolder)
at Microsoft.SharePoint.Library.SPRequest.GetMetadataForUrl(String bstrUrl, Int32 METADATAFLAGS, Guid& pgListId, Int32& plItemId, Int32& plType, Object& pvarFileOrFolder)
at Microsoft.SharePoint.SPWeb.GetList(String strUrl)
at Microsoft.SharePoint.Administration.SPDeveloperData.RemoveFromDraftApps(SPSite site, Guid appInstanceId)
at Microsoft.SharePoint.Lifecycle.FinalFixupTask.Rollback()
at Microsoft.SharePoint.Administration.SPAppTask.DeployOperation()
at Microsoft.SharePoint.Lifecycle.MonitoredTaskExecution.DoTask()
Source: Finalization
SourceName: App Deployment Finalization
Harsh

no ,it does has db permissions , this whole thing I think is related with weird and strange new condition of havinng sub-domains for apps ? by some changes I found it gos to my website and find outs that no resource available there , sometime 404 sometimes
502 error.
The whole idea of office team about app deployment is crazy , no proper documentation or knowledge base available for people using on-prem sharepoint, this may because of the idea using cloud more ,why should we use cloud for our enterprise data ?
btw links you gave not working either
Tech Learner

The project cannot be checked out because the server is in read-only mode.

Receiving the message "The project cannot be checked out because the server is in read-only mode." when a project manager is trying to access a project. He is a backup PM, and I'm wondering if that's why he is getting the message (since he is
not the Owner or Status Manager of the project he is trying to access). We are using SharePoint permissions in Project Server 2013.

Hi,
I have a solution that might work for you, please follow steps below:
1) Go to your project schedule, make a small modification to any task on schedule and 'Publish' the project.
2) While your project is being published and saved, open another window
Server Settings -> Manage Queue Jobs
3) Here you can view the progress of your current Project Publishing update, check if all goes smooth and your project is published successfully without indicating any errors :
( to view any error look at the last column of
table on Manage Queue Job page)
4) Also in your Project window see if the project is published and not saved as Draft.
Basically this will give you a fair idea of your project being published or not.
Regards

How to 'move' databases from one server to another

Hi there
Here is a brief description of my assignment.
We have two Redhat Linux 4 64-bit server where two Oracle 10.2.0.4 64-bit database are running (one on each server).
<li>DB on server1 is using Filesystem for storage.
<li>DB on 2nd server is using ASM.
<li>Size of both is between 75-80GB.
<li>I have to move both the databases to new servers (same platform) with minimum downtime.
<li>There is no upgrade required during this move/migration. Both DBs have to be brought over as-is.
<li>The new servers may be on VMWare - I am not sure it at the moment. But please let me know if that will make any difference.
I would highly appreciate if someone could please provide me with some high-level guidelines to perform this move.
Best regards

Hi Srini
Thank you so much for sharing the valuable URLs.
I am reading through "Cloning An Existing Oracle10g Release 2 (10.2.0.x) RDBMS Installation Using OUI [ID 559304.1]" and I have few questions.
<li> This MOS says:
NOTE: This note should only be used for cloning single-instance (non-RAC) homes. It should not be used for cloning RAC, CRS or ASM homes.If that is the case, how should I clone ASM-Home?
One of the environments that I have to migrate to a new server has ASM installed as well. And couple of oracle databases (10.2.0.5) on that server are using ASM for storage.
<li>If were to do a fresh installation of 10gR2 RDBMS and ASM homes (on Redhat Linux 64-bit), I guess I need to contact Oracle Support (open an SR) to access the software, right?
<li>How to check from existing installation which patches I need to download and apply to this fresh installation in order to make it same as the existing installation? "opatch lsinventory" gives me a long list of number/fixes - I don't know which patch(es) to download.
Please advise!
Best regards
Edited by: user130038 on May 22, 2013 3:48 AM
Edited by: user130038 on May 22, 2013 3:55 AM

How to check whether a Oracle server is installed or not ?

Hi,
How cani check whether a Machine has oracle server installed or not ?
I have a machine where i have the client tools installed but not server. In that case how can i check whether this machine has oracle server is installed or not?
Thanks in Advance..

user11000236 wrote:
Hi,
How cani check whether a Machine has oracle server installed or not ?
I have a machine where i have the client tools installed but not server. In that case how can i check whether this machine has oracle server is installed or not?
Thanks in Advance..http://tinyurl.com/ngunhv
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com
[Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

How to save files on the server?

I want to save a log on the server, how can I do this using Oracle?
In SQL Server I used the "bcp" command.
Thanks.

as forbrich suggested you can use the UTL_FILE built-in package. here is an example code to read and write to a file.
CREATE OR REPLACE PROCEDURE Read_Write_File (pvInFile Varchar2,
                                             pOutFile Varchar2) IS
vInFile   utl_file.file_type;
vOutFile utl_file.file_type;
vNewLine VARCHAR2(4000);
x         PLS_INTEGER;
vFlag BOOLEAN := TRUE;
BEGIN
-- assuming Your_Directory is $HOME/myTxtFiles in a Unix Platform
-- to check if definition is existing Select Directory_Name, Directory_Path From All_Directories;
vInFile := utl_file.fopen('Your_Directory',pInFile,'r');
vOutFile := utl_file.fopen('Your_Directory',pOutFile, 'w');
IF utl_file.is_open(vInFile) THEN
    LOOP
      BEGIN
        utl_file.get_line(vInFile, vNewLine);
        x := utl_file.fgetpos(vInFile);
        dbms_output.put_line(TO_CHAR(x));
        utl_file.put_line(vOutFile, vNewLine, FALSE);
        utl_file.fflush(vOutFile);
        IF vFlag = TRUE THEN
          utl_file.fseek(vInFile, NULL, -30);
          vFlag := FALSE;
        END IF;
      EXCEPTION
        WHEN NO_DATA_FOUND THEN
          EXIT;
      END;
    END LOOP;
    COMMIT;
END IF;
utl_file.fclose(vInFile);
utl_file.fclose(vOutFile);
EXCEPTION
WHEN others THEN
    RAISE_APPLICATION_ERROR (-20099, 'Unknown UTL_FILE Error');
END;
/

How to stop caching on the server

Hello,
Can anyone please guide me as to how do we disable caching on the
portal server since the changes i am making in the JSP pages are not
reflected immediately. I have already cleared the browser cache but now i
want to clear the cache on the portalserver. I have also cleared all the
class files created when the jsp was compiled but still there is no change.
If anyone has faced similar problems and can throw some light on it.
akshay

Akshay
I faced the same problem as you did.I went thru what Adrian advisesd and it works.Did
you update teh correct XML file?.In my case,the weblogic.xml file is whawt holds
this property and resides in
D:\wlportal4.0\applications\portal\dp2\WEB-INF\weblogic.xml
where 'dp2' is the sample portal iam working on.
I hope this helps.
- Logesh
"akshay" <[email protected]> wrote:
Hi Adrian,
Thanks again for the quick reply but even this setting
did not
work.
This has created a major development problem and the only way out i found
was either to restart the server or change the name of the file which
i am
accessing. Please suggest some other way to achieve this no caching state
on
the server i even cleared the browser cache.
Thanks in advance
akshay
"Adrian Fletcher" <[email protected]> wrote in message
news:[email protected]...
Akshay,
Ok, now I understand your problem. What you need to do is to changethe
JSP
operating parameters for this webapp. These parameters are found inthe
weblogic.xml file associated with your webapp. The reference for thejsp
descriptor element can be found here:
http://edocs/wls/docs61/webapp/weblogic_xml.html#1012195
I think the parameter you need to change is pageCheckSeconds. Ifyou set
this to 0 then the page is checked every request.
Hope this helps,
Sincerely,
Adrian.
Adrian Fletcher.
Senior Software Engineer,
BEA Systems, Inc.
Boulder, CO.
email: [email protected]
"akshay" <[email protected]> wrote in message
news:[email protected]...
Hi adrian,
Thanks for your quick reply I am not aware about theclustered
environment but here i have created a jsp page (named first.sjp)
to
check
a
connection pool i have created which i have placed it along with
the
index.jsp page of stockportal and using the following URl i havemade a
request http://<myportalserver>:7501/stockportal/first.jsp the first
time
when i request for this page it works fine -- the data flows perfectlybut
after making any changes say for example if i change the table name
from
where the data is to be fetched
it does not show me the new data it shows me the data from the previous
table. whereas if i change the name of the jsp page and request itworks
fine. I want to disable this caching
at the server to make this thing work i cleared all the cache ofthe
browser
but still could not achieve no cache state.
thanks in advance
akshay
"Adrian Fletcher" <[email protected]> wrote in message
news:[email protected]...
Akshay,
The design of the caching in portal is such that all changes should
be
reflected immediately, even across a cluster. However there isone
outstanding issue around a performance enhancement for the anonymoususer
case, where this cache is not updated unless the associated .portal
file
is
datasynced. So for changes to the default group either test with
a
logged
in
user of this group or do a datasync to clear the cache.
If this does not solve your problem please let us know.
Sincerely,
Adrian.
Adrian Fletcher.
Senior Software Engineer,
BEA Systems, Inc.
Boulder, CO.
email: [email protected]
"akshay" <[email protected]> wrote in message
news:[email protected]...
Hello,
Can anyone please guide me as to how do we disable caching
on
the
portal server since the changes i am making in the JSP pages
are not
reflected immediately. I have already cleared the browser cachebut
now
i
want to clear the cache on the portalserver. I have also cleared
all
the
class files created when the jsp was compiled but still there
is no
change.
If anyone has faced similar problems and can throw some light
on it.
akshay

Problems found after checking database configuration of server

Hello all,
Though this problem has been addressed before. .
I couldnt get a clear idea.
I get the error. .
"Wrong Server Collation; J2EE installation requires
SQL Latin 1 General CP850 Bin 2 Collation.
MS SQL Server Patch is too low; please read the note 62988;
These problems must be fixed before continuing installation."
https://www.sdn.sap.com/sdn/collaboration.sdn?contenttype=url
&content=http%3A//forums.sdn.sap.com/thread.jspa%3FthreadID%3
D18855
I installed SQL Server 2000 SP3. And in type radio button,
Choose Custom and then proceeded to choose the collation
designator latin1_General and sort order as Binary as advised
in the note (service.sap.com).
Now I am trying to install SAPinst for netweaver Installation.
Then the above error is repeated again and again and again and
again. I have been trying it since quite some time going through
service.sap.com/SDN,have gone through various notes and even
installed the hot fix provided at (service.sap.com) still
I get the following error:
"Wrong Server Collation; J2EE installation requires
SQL Latin 1 General CP850 Bin 2 Collation.
These problems must be fixed before continuing installation."
When i try to connect to. .It says
The current collation is Latin1_General1_BIN,
Not SQL_Latin1_General1_Cp850_BIN
Then install the Unicode hotfix(QFE)
Any inputs in this regard would be appreciated
Thanks in advance.
Mohan.

Hi Mohan,
the note 62988 is not that helpful in your case. You will need to read carefully the note 600027 and download the ZIP-file attached to the note.
After unpacking the ZIP-file just execute INSTCOLL.EXE from a local directory.
In the note is also described how to check that after executing INSTCOLL.EXE the collation has changed to SQL_Latin1_General_CP850_BIN2.
Hope this helps,
Robert

How to check databases in the server

Similar Messages

Maybe you are looking for