The project cannot be checked out because the server is in read-only mode.

Receiving the message "The project cannot be checked out because the server is in read-only mode." when a project manager is trying to access a project. He is a backup PM, and I'm wondering if that's why he is getting the message (since he is
not the Owner or Status Manager of the project he is trying to access). We are using SharePoint permissions in Project Server 2013.

Hi,
I have a solution that might work for you, please follow steps below:
1) Go to your project schedule, make a small modification to any task on schedule and 'Publish' the project.
2) While your project is being published and saved, open another window
Server Settings -> Manage Queue Jobs
3) Here you can view the progress of your current Project Publishing update, check if all goes smooth and your project is published successfully without indicating any errors :
( to view any error look at the last column of
table on Manage Queue Job page)
4) Also in your Project window see if the project is published and not saved as Draft.
Basically this will give you a fair idea of your project being published or not.
Regards

Similar Messages

The Index Server is in Read Only Mode

Hi,
In our test environment ALL of our jobs are failing. The message in every failed Job Log is:
11/18/05 10:25:15- Starting to run operations (1 total) for job 'Search Update 2 - Run Once'. Will stop on errors. (PID=14064)11/18/05 10:25:16- *** Job Operation #1 of 1: System Agent 'Search Update Agent' [Run as owner 'Administrator']11/18/05 10:25:16- The index server is in read-only mode.11/18/05 10:25:16- The index Server is inaccessible. Search Update cannot continue and will terminate.11/18/05 10:25:16- *** Job Operation #1 failed: Call to perform operation #1 failed with error (0x80044301): (null) (0x4)11/18/05 10:25:16- Call to perform operation #1 failed with error (0x80044301): (null)
has anybody seen this before, and how can I correct it?
Thanks,Shawn

The search server goes into read only mode in response to certain error conditions. Simply restart the service to put the search server back into R/W mode. The server will attempt to self repair on startup. You should review your recent search server logs to see if there are errors that may have caused the transition to read only mode. If problems persist, contact tech support for further assistance in troubleshooting.

Opening the file in read only mode

hi all,
i am using
i want to open any type of files in read only mode using host command.so first i am setting the attribute to read only and then opening the file. But still the opened file is editable. i have written like below
Host( 'cmd /c attrib +r "\test_folder\testing\PURCHASE_ORDER\'||:PO_FILE_NAME||'"',NO_SCREEN);
Host( 'cmd /c "\test_folder\testing\PURCHASE_ORDER\'||:PO_FILE_NAME||'"',NO_SCREEN);is this is the way to open the file in readonly mode?
Along with the above the files which i opened with the help of above said code those files i am not able to delete also.(i have to delete the selected file)
i thing when i am setting the attribute something is going for a mess!
Please help.
Thanks..
Edited by: GD on Jun 23, 2011 2:25 AM

hi,
Read only means you cannot mofiy the file. This also includes that you cannot delete a readonly-file yes,
what i am doing is i have three button in my layout 'save','view' and 'delete'.
1.so when user press 'save' button after selecting the file then the file gets saved into the specified.
2. when user press 'view' button the file has to open in read only mode.
for this i have written above mentioned code(but still i am able to edit the file)
3.when user press 'delete' button the file has to be deleted from the specified location.
so my problem is after setting file to read only mode, i am able to edit but i am not able to delete it.
What i am using to set the file to read only mode is right?
Please help.
Thanks..

Shop told me that i cannot change my iphone4s because The warranty is out from Humidity..

My problem is the power button cannot press...
but I went to the shop
Shop told me that i cannot change my iphone4s because The warranty is out from Humidity..
I think it's not fair for me,
My iPhone never been soak the water before..
I think I used it in Thailand ,, it's tropical weather...
that's not my false ..
so why i cannot change?
Please tell me the good reasons.
Thanks

Here is the article about it:
iPhone and iPod: Liquid damage is not covered by warranty
Since we are all users here just like you, we can't do anything about decisions made by Apple.
You'll have to pay for a replacement:
Out-of-Warranty Service
If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
iPhone model
Out-of-Warranty Service
iPhone 5
$229
iPhone 4S
$199
iPhone 4, iPhone 3GS,
iPhone 3G, Original iPhone
$149
A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in U.S. dollars and are subject to local tax.
When setting up out-of-warranty service, Apple will request credit card pre-authorization for the maximum service fee listed above. This amount will be deducted from your credit limit. The final service fee we charge will be determined during testing and may be less than the service fee listed above.
Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPhone that has failed due to contact with liquid may be eligible for out-of-warranty service.
Apple reserves the right to determine whether or not your iPhone is eligible for Out-of-Warranty service. iPhones that are repaired or replaced have a 90-day limited hardware warranty or assume the remainder of your standard warranty or AppleCare service contract coverage, whichever is longer. Please see Apple's Repair Terms And Conditions for further details.
Message was edited by: Ingo2711

Memory gates checking failed because the free memory is less than 5% of total memory

·         Business
Goal: Achieve a stable environment
·         Repro
Steps: n/a
·         Expected
Results: I expect the MSCRM Async services to use a relatively static amount of RAM
·         Actual
Results: Over the weekend, the memory hit critical mass and CRM failed
·         Environment:
Windows Server 2008, SQL Server 2008, CRM 2013 On Premise - both on the same box, Email Router is installed on the same box. We have not yet applied either of the two new UR for 2013.
I'm currently experiencing a memory leak in our production environment. I will fill out the details shortly.
Here's the error:
Log Name:      Application
Source:        System.ServiceModel 4.0.0.0
Date:          4/20/2014 11:39:14 PM
Event ID:      3
Task Category: WebHost
Level:         Error
Keywords:      Classic
User:          NETWORK SERVICE
Computer: server.domain.com
Description:
WebHost failed to process a request.
Sender Information: System.ServiceModel.ServiceHostingEnvironment+HostingManager/58366981
Exception: System.ServiceModel.ServiceActivationException: The service '/VisualWorkplace/XRMServices/2011/Organization.svc' cannot be activated due to an exception during compilation.
The exception message is:Memory gates checking failed because the free memory (1240145920 bytes) is less than
5% of total memory. As a result, the service will not be available for incoming requests. To resolve this, either reduce the load on the machine or adjust the value of minFreeMemoryPercentageToActivateService on the serviceHostingEnvironment config
element.. ---> System.InsufficientMemoryException: Memory gates checking failed because the free memory (1240145920 bytes) is less than 5% of total memory. As a result, the service will not be available for incoming requests. To resolve
this, either reduce the load on the machine or adjust the value of minFreeMemoryPercentageToActivateService on the serviceHostingEnvironment config element.
   at System.ServiceModel.Activation.ServiceMemoryGates.Check(Int32 minFreeMemoryPercentage, Boolean throwOnLowMemory, UInt64& availableMemoryBytes)
   at System.ServiceModel.ServiceHostingEnvironment.HostingManager.CheckMemoryCloseIdleServices(EventTraceActivity eventTraceActivity)
   at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath, EventTraceActivity eventTraceActivity)
We just recently increased the available memory from 8GB to 24GB to help ensure that there is enough memory. This error never happened on CRM v4. According to the resource monitor, SQL is only reserving 20.7GB of RAM and there is 694MB of RAM in Standby.
The main Async service is using 660MB and the maintenance Async service is using 265MB.
To resolve the issue temporarily, I restarted both Async services this morning. Shortly after everything came back, they were holding fairly steady around 350MB and 200MB. It's been six hours since then.
The last time I spoke with Microsoft about a similar problem, they suggested increasing the amount of RAM.

It became more and more of a problem. It was impacting the users in a more subtle way at first. You couldn't configure the CRM for Outlook client. After a while, they couldn't use CRM in Outlook at all and users reporting not being able to complete phone
call activities. I opened a ticket with MS and they suggested the same as Wilson Lou did. The organization error had nothing to do with the creep on the async services usage of RAM. It was indeed caused by SQL stealing all of the memory. Limiting the max usage
to 24GB RAM has resolved that error.
My Async processes are still using a LOT of RAM, but now that I have more than enough RAM, it doesn't seem to be a problem anymore. They are currently using about 700MB RAM each.
Also, I have upgraded to SP1, UR2.
Eric Hula - CRM Administrator

DAG 2010 Cluster IP address resource 'Cluster IP Address' cannot be brought online because the cluster network replication

Hello,
DAG Exchange 2010 SP3 RU6 with MAPI network and Replication network. All works correctly.
But, when the DAG member restarts , the cluster goes offline and i can't bring it online.
The message error:
Cluster IP address resource 'Cluster IP Address' cannot be brought online because the cluster network 'Cluster Network 1' is not configured to allow client access.
Cluster Network 1 is the replication network and it is normal that allow client access is unchecked
I already tried to check, apply then uncheck apply. it does anything.
Could you please help me to figure out the issue ?
Best regards

Hi,
Check below link.
http://forums.msexchange.org/Cluster_network_name_is_not_online/m_1800552315/tm.htm
I was able to resolve the issue without taking down any resources.
First, I noticed that the Failover Cluster Manager "Cluster Name" had the IP address of the replication network only..
After going back through the guide @
http://technet.microsoft.com/en-us/library/dd638104.aspx I changed the properties on the NICs for file sharing, etc..I then adjusted windows firewall rules to block traffic from my MAPI network destined for the replication network.
I then removed the IP from the replication network on the DAG leaving only the 1 MAPI network IP.
After an hour or so, I ran Get-DatabaseAvailabilityGroupNetwork and seen that the MAPIAccess property was finally set to true on my MAPI network. I went back to Failover Cluster Manager and my Cluster Core Resource Cluster Name dropped the IP address that was
associated (IP from the replication network) I added a new IP from my Mapi network range, updated the DAG IP in Exchange and the DNS record for the DAG and my cluster resource came online.

I saved my Form Central spreadsheet file once as a excel file but it will not allow me to save it a second time as an excel file. It says that I cannot complete this action because the file me be open in another application, but it is not open in another

I saved my Form Central spreadsheet file once as a excel file but Forms Central will not allow me to save the file a second time as an excel file. I am informed that I cannot complete this action because the file me be open in another application, but it is not open in another application. What is the problem, and how do I solve the problem. Thank you. Jeff

First check the version of the document with Jongware's script "Identify.jsx" (ExtendScript/JavaScript).
You can find it here:
[Ann] Identify Your InDesign File
If it is CS 5.5 or above, you need someone to open it in the version the script says and export an IDML representation from that. Another way would be to install a 30days version of CS6 or above (CC) and do it yourself.
In regards of the script showing a result for InDesign files higher than CS6:
CS7 = CC v9
CS8 = CC v10 = CC-2014 or CC2014.1
Uwe

Cannot delete exe files - The action can't be completed because the file is open in Windows Explorer

We have received 3 new computers with Windows 8.1. All of us 3 have the same problem: we cannot delete exe files with message "The action can't be completed because the file is open in Windows Explorer"
For example, I download skypeinstall.exe on desktop, install the program correctly and then try to delete the file: file is in use by Windows Explorer, cannot be delete.
We reboot computer, we are able to delete the file. But, if I restore the file from the recycle bin on the desktop, I cannot delete it again until I reboot the PC. I used ProcessExplorer to see what is locking it and I can see 5 instances of explorer.exe
locking the file.
I can always reproduce the same way:
1-Reboot
2-Delete exe file
3-Restore file
4-Delete stop working and 5 explorer.exe handle are locking it.
I have tried the following so far after reading multiple threads:
- De-activating Windows Search service
- Activating User Experience service
- Deleting from command prompt (no success)
- In folder options: inactivate display icon on thumbnail and activate always display icons, never thumbnail
- Changing folder view (contents, detail, small icons...)
- Using Lock Hunter - not working until reboot
None of these worked.
We all have Windows 8.1 with Crucial SSD drive, could the problem be linked with the SSD drive incompatibility?
Any help would be appreciated.

Hi,
Please try to make a clean boot for your system, then check if this problem resolved.
Clean Boot: http://support.microsoft.com/kb/929135
If problem persists, try to open Resource Monitor to check handle of Explorer.exe, if there any exception, end them for test.
Roger Lu
TechNet Community Support

Certificate issues Active Directory Certificate Services could not process request 3699 due to an error: The revocation function was unable to check revocation because the revocation server was offline. 0x80092013

Hi,
We have some problems with our Root CA. I can se a lot of failed requests. with the event id 22: in the logs. The description is: Active Directory Certificate Services could not process request 3686 due to an error: The revocation function was unable to
check revocation because the revocation server was offline. 0x80092013 (-2146885613). The request was for CN=xxxxx.ourdomain.com. Additional information: Error Verifying Request Signature or Signing Certificate
A couple of months ago we decomissioned one of our old 2003 DCs and it looks like this server might have had something to do with the CA structure but I am not sure whether this was in use or not since I could find the role but I wasn't able to see any existing
configuration.
Let's say that this server was previously responsible for the certificates and was the server that should have revoked the old certs, what can I do know to try and correct the problem?
Thank you for your help
//Cris

hello,
let me recap first:
you see these errors on a ROOT CA. so it seems like the ROOT CA is also operating as an ISSUING CA. Some clients try to issue a new certificate from the ROOT CA and this fails with your error mentioned.
do you say that you had a PREVIOUS CA which you decomissioned, and you now have a brand NEW CA, that was built as a clean install? When you decommissioned the PREVIOUS CA, that was your design decision to don't bother with the current certificates that it
issued and which are still valid, right?
The error says, that the REQUEST signature cannot be validated. REQUESTs are signed either by itself (self-signed) or if they are renewal requests, they would be signed with the previous certificate which the client tries to renew. The self-signed REQUESTs
do not contain CRL paths at all.
So this implies to me as these requests that are failing are renewal requests. Renewal requests would contain CRL paths of the previous certificates that are nearing their expiration.
As there are many such REQUEST and failures, it probably means that the clients use AUTOENROLLMENT, which tries to renew their current, but shortly expiring, certificates during (by default) their last 6 weeks of lifetime.
As you decommissioned your PREVIOUS CA, it does not issue CRL anymore and the current certificates cannot be checked for validity.
Thus, if the renewal tries to renew them by using the NEW CA, your NEW CA cannot validate CRL of the PREVIOUS CA and will not issue new certificates.
But it would not issue new certificates anyway even if it was able to verify the PREVIOUS CA's CRL, as it seems your NEW CA is completely brand new, without being restored from the PREVIOUS CA's database. Right?
So simply don't bother :-) As long as it was your design to decommission the PREVIOUS CA without bothering with its already issued certificates.
The current certificates which autoenrollment tries to renew cannot be checked for validity. They will also slowly expire over the next 6 weeks or so. After that, autoenrollment will ask your NEW CA to issue a brand new certificate without trying to renew.
Just a clean self-signed REQUEST.
That will succeed.
You can also verify this by trying to issue a certificate on an affected machine manually from Certificates MMC.
ondrej.

Logout has timed out because the application Mail failed to quit.

Hello world... (Mac world that is)
The message says more "Logout has timed out because the application Mail failed to quit. To try again, quit Mail and choose Log Out from the Apple menu."
I tried everything. Still does not let me shut down.
Other programs will not shut down at this time, including Finder. I also know that the Time Machine icon has been spinning for over an hour. So I imagine we are in a loop of sorts.
Unfortunately, I have had similar troubles before that I did not record. So I figure I start now and see if somebody out there can help me.
Peace!
Chopo

I'm having the same problem (can't logout, shut down or restart), but the referenced solution doesn't seem to apply. I do not get a "Cannot connect to server" message, I just get a "Logout has timed out" message. It seemed to happen after an automatic software update that was supposed to involve a restart, but it hasn't been able to restart since.
Can you please clarify, what is meant by "delete the AutoLaunchedApplicationDictionary, which is located under the root node" (with reference to file loginwindow.plist)?
This is what the loginwindow.plist file looks like now:
bplist00Ñ!AutoLaunchedApplicationDictionary¢ÒTPathTHide-/Library/Printers/hp/hpio/HPEventHandler.app/Ò _N/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app//27
I was at the genius bar earlier, and they said I need to 'archive and install' in order to 'reset the OS'... but there's got to be a better answer than that, no? Perhaps this plist thing? I'm surprised that even powering off the imac doesn't reset anything... it just comes back the way it was. I'm supposed to bring the 25 inch imac in to the mac store for surgery (archive and install), but seeing several similar cases on this discussion forum, without archive and install identified as the clear solution, I'm in search of a second opinion... or any suggestion for how to simply make this work the way it was before? Is it 10.5.4 that is causing this? Should I go back to 10.5.3?
Any suggestions are appreciated. Thank you.

I have plenty of space on my hard drive (500GB), but when I plug in my iPhone there is a window stating the pone cannot be backed up because of lack of disk space. The same occurs with attempting to import CD's into iTunes.

I have plenty of space on my hard drive (500GB), but when I plug in my iPhone there is a window stating the pone cannot be backed up because of lack of disk space. The same occurs with attempting to import CD's into iTunes. The hard disk was replaced recently in order to gain extra memory. Is there some sort of limit set up from the original hard drive causing this problem?

Boot up from your Snow Leopard Install DVD while holding down the "c" key.
Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
If Disk First aid is unable to complete the repair you will need to use a stronger 3rd party utility like DiskWarrior or TechTool Pro.
Once this process has been completed restart your computer.
Utilities & info regarding checking your HD space:
Where did my Disk Space go?
Slimming your hard drive
Seven ways to free up drive space
OmniDiskSweeper is a free utility that checks HD space.
FreeSpace cost $1 or is a free utility that checks HD space.
SpaceControl is a free utility that checks HD space.
Disk Inventory X
WhatSize
SpaceControl

The workflow could not check out the list item.

Hi Guys,
I have a workflow enabled on document library and it needs to started manually.
Whenever user starts workflow manually, gets following error:
"the workflow could not check out the list item. Make sure the list item is not checked out." list item is not checked out & this workflow was working smoothly earlier.
OutCome: The workflow operation failed because the workflow lookup found no matching item.
I have gone through below links:
https://christopherclementen.wordpress.com/2014/05/23/oob-approval-workflow-error/
https://social.msdn.microsoft.com/Forums/office/en-US/f673d0f6-92eb-4057-95ff-ed3cb7790360/the-workflow-operation-failed-because-the-workflow-lookup-found-no-matching-item?forum=sharepointcustomizationprevious
Any clue on this?
Thanks, Nilesh

maybe check out for editing documents setting is turned on so wokrflow needs doc to ce cheked out before proceding and user might not have permission to do that.
please refer below link:
http://sharepoint.stackexchange.com/questions/32399/workflow-error-the-workflow-could-not-update-the-item-possibly-because-one-or
http://community.office365.com/en-us/f/154/t/243062.aspx
http://stackoverflow.com/questions/1272957/document-checked-out-in-sharepoint-when-workflow-starts
Please mark as answer if you find it useful else vote for it if it is close to answer..happy sharepointing

Cannot install Muse trial because the installation package says it is corrupt

Cannot install Muse trial because the installation package says it is corrupt. I tried to download the Englisch and the Dutch versions both, but both with the same message: contact the 'maker' of te program. So here I am, big 'maker'... pleas help.
My computer with my Muse licence was stolen last week so I need the trial to finish an important project, aaaaarrrrrgggg!
The message I got: Sorry, er is een fout optgetreden. De toepassing kon niet worden geïnstalleerd, omdat het installatiebestand beschadigd is. Probeer een nieuw installatiebestand te krijgen van de toepassingsauteur.
In English: Sorry, an error has occurred. The program cannot be installed because it is damaged. Try to get a new one.
HELP!

How do I find this activity monitor on my Mac? | Apple Support Communities

*The operation cannot be carried out with this node type*

Hi Friends,
My requirement is :
PO in IS retail system--(IDOC ORDERS)--Sales Order processing-->Sales order in AFS system
where AFS is apparel footwear solution used in retail industries.
Now I have created PO in IS-retail system , and IDOC is successfully generated .
After this I am checking this IDOC in AFS system thru tcode BD87 for processing but getting error mesage in next screen when I am executing BD87 after putting the IDOC number.
The operation cannot be carried out with this node type
Message no. B1891
Diagnosis
Node types such as logical system, inbound and outbound IDocs or filter nodes are used only for the structure and for information. They cannot
be used for processing and display functions.
Any pointers .
Regards
Ashu

a

Cannot start VM - IDE Emulator Failed to Power on with Error 'The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.'

HI all.
New install of 2008R2 on HP DL-380 G6. I have created (several) VM's none of which will start. If I remove the IDE Hard Disk and add a DVD of the OS ISO, it will boot and start the install (although with no HDD).
It seems like the IDE controller is working ok - it is what the DVD drive is using, but it cannot mount a VHD. The error indicates a driver is not working (although the DVD on IDE works fine) so something to do with VHD? I can attach the VHD
in disk management, so it does not seem corrupt - again I have tried with both dynamic and fixed VHDs.
Full error is:
'Test1' failed to start. (Virtual machine ID 4320D2D6-DF7E-40D2-BD0F-9562CBB9F052)
'Test1' Microsoft Emulated IDE Controller (Instance ID {83F8638B-8DCA-4152-9EDA-2CA8B33039B4}): Failed to Power on with Error 'The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.' (0x80070422).
(Virtual machine ID 4320D2D6-DF7E-40D2-BD0F-9562CBB9F052)
'Test1': Failed to open attachment 'C:\Users\Public\Documents\Hyper-V\Virtual hard disks\New Virtual Hard Disk.vhd'. Error: 'The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.' (0x80070422).
(Virtual machine ID 4320D2D6-DF7E-40D2-BD0F-9562CBB9F052)
Any Ideas?

Hi ,
Did you try to disable the services , if they are exsit :
HP Smart Array SAS/SATAEvent notification
HP Insight storage agents
Then restart your server .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

The project cannot be checked out because the server is in read-only mode.

Similar Messages

Maybe you are looking for