How to check the value in Table CDPOS

Mostly I can't see the following fields value in the table CDPOS,
(1) CDPOS-VALUE_NEW
(2) CDPOS-VALUE_OLD
In fact, it should have values, so how to check the values, is there any special method needed?
Thanks and best regards.

Ferry Lianto,
Thank you very much for your expertise.
It's helpful to get some contents via FM:CHANGEDOCUMENT_READ_POSITIONS, the problem is, to some kind of DELETION operation, the log in table CDPOS is very simple, I still don't know which contents were deleted even though I found records in table CDPOS.
Is there any other suggestions?
Thanks and best regards.

Similar Messages

How to get the values from table region and how to set

Hi,
I have a requirement as Seeded Page Having One Table Region having around 8 columns, In That Item Description field is there. My Requirement is I need add one more field for that Region and assign the value depending Item Description.
I will create one new Item in that region and will give name as Item, But how to set the values to Item Depending on Item Description.
Is it possible to through CO Extension, If yes..Pls help how to get it.
Thanks in Advance,
Hanimi

Hi Hanimi,
1. You need to extend the VO, add a new Attribute.
2. In VORowImpl of the extended VO, you can find the getter for your new attribute (example getItem())
3. In this getter method you can write some code like:
if("ABC".equals(getItemDescription())
return "XYZ" ;
-Prince
http://princekapoor82.blogspot.com

How to check the value from user input in database or not?

Hello;
I want to check the value of user input from JtextFiled in my database or not.
If it is in database, then i will pop up a window to tell us, otherwise, it will tell us it is not in database.
My problem is my code do not work properly, sometimes, it tell me correct information, sometime it tell wrong information.
Could anyone help,please.Thanks
The following code is for check whether the value in database or not, and pop up a window to tell us.
while( rs.next()) {
                System.out.println("i am testing");
                bInt=new Integer(rs.getInt("id"));
                if(aInt.equals(bInt)){ // If i find the value in data base, set flag to 1.
              flag=1; //I set a flag to check whether the id in database or not
                    break;
         System.out.println("falg" + flag);
            if(flag==1){ //?????????????????????
          String remove1 = "DELETE FROM Rental WHERE CustomerID=" + a;
          String remove2 = "DELETE FROM Revenus WHERE CustomerID=" +a;
          String remove3 = "DELETE FROM Customer WHERE id=" +a;
          s.executeUpdate(remove1);
          s.executeUpdate(remove2);
          s.executeUpdate(remove3);
                JOptionPane.showMessageDialog(null,"you have success delete the value");
          s.close();
         else//???????????????????????????????
              JOptionPane.showMessageDialog(null,"I could not found the value"); -------------------------------------------------------------------
My whole program
import java.sql.*;
import java.awt.BorderLayout;
import javax.swing.JFrame;
import javax.swing.JScrollPane;
import javax.swing.JTable;
import javax.swing.JOptionPane;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.*;
public class DeleteC extends JFrame
    public static int index=0;
    public static ResultSet rs;
    public static Statement s;
    public static Connection c;
    public static Object cols[][];
    private static JTable table;
    private static JScrollPane scroller;
    private static int flag=0;
    public DeleteC()
        //information of our connection
        //the url of the database: protocol:subprotocol:subname:computer_name:port:database_name
        String strUrl      = "jdbc:oracle:thin:@augur.scms.waikato.ac.nz:1521:teaching";
        //user name and password
        String strUser      = "xbl1";
        String strPass      = "19681978";
        //try to load the driver
        try {
            Class.forName("oracle.jdbc.driver.OracleDriver");
        catch (ClassNotFoundException e) {
            System.out.println( "Cannot load the Oracle driver. Include it in your classpath.");
            System.exit( -1);
        //a null reference to a Connection object
        c = null;
        try {
            //open a connection to the database
            c = DriverManager.getConnection( strUrl, strUser, strPass);
        catch (SQLException e) {
            System.out.println("Cannot connect to the database. Here is the error:");
            e.printStackTrace();
            System.exit( -1);
       //create a statement object to execute sql statements
    public void getData(String a){
        try {
         //create a statement object to execute sql statements
         s = c.createStatement();
            int index=0;
            Integer aInt= Integer.valueOf(a);
            Integer bInt;
              //our example query
            String strQuery = "select id from customer";
            //execute the query
            ResultSet rs = s.executeQuery( strQuery);
            //while there are rows in the result set
            while( rs.next()) {
                System.out.println("i am testing");
                bInt=new Integer(rs.getInt("id"));
                if(aInt.equals(bInt)){
              //JOptionPane.showMessageDialog(null,"I found the value");
              flag=1;
                    break;
         System.out.println("falg" + flag);
            if(flag==1){
          String remove1 = "DELETE FROM Rental WHERE CustomerID=" + a;
          String remove2 = "DELETE FROM Revenus WHERE CustomerID=" +a;
          String remove3 = "DELETE FROM Customer WHERE id=" +a;
          s.executeUpdate(remove1);
          s.executeUpdate(remove2);
          s.executeUpdate(remove3);
                JOptionPane.showMessageDialog(null,"you have success delete the value");
          s.close();
         else
              JOptionPane.showMessageDialog(null,"I could not found the value");
        catch (SQLException e) {
             JOptionPane.showMessageDialog(null,"You may enter wrong id");
My main program for user input from JTextField.
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.JOptionPane;
import java.util.*;
public class EnterID extends JFrame{
    public JTextField tF1;
    public EnterID enID;
    public String tF1Value;
    private JLabel label1, label2, label3;
    private static JButton button;
    private static ButtonHandler handler;
    private static String aString;
    private static Integer aInteger;
    private static Integer checkV=0;
    public static void main(String args[]){
     EnterID eId= new EnterID();
   public EnterID(){
      handler=new ButtonHandler();
      Container c= getContentPane();
      c.setLayout(new GridLayout(3,1));
      button= new JButton("ok");
      button.addActionListener(handler);
      label1 = new JLabel(" CustomerID, Please");
      label2 = new JLabel("Label2");
      label3 = new JLabel();
      label3.setLayout(new GridLayout(1,1));
      label3.add(button);
      label2.setLayout(new GridLayout(1,1));
      aString = "Enter Id Here";
      tF1 = new JTextField(aString);
      label2.add(tF1);
      c.add(label1);
      c.add(label2);
      c.add(label3);
      setSize(150,100);
      setVisible(true);
   private class ButtonHandler implements ActionListener{
     public void actionPerformed(ActionEvent event){
         tF1Value=tF1.getText();
        //   CheckData cData = new CheckData();
         // aInteger = Integer.valueOf(tF1Value);
         if(tF1Value.equals(aString)){
          JOptionPane.showMessageDialog(null,"You didn't type value into box");
          setVisible(false);
        else {
          DeleteC dC= new DeleteC();
          dC.getData(tF1Value);
          setVisible(false);
}

You may have working code now, but the code you posted is horrible and I'm going to tell you a much much much better approach for the JDBC part. (You should probably isolate your database code from your user interface code as well, but I'm skipping over that structural problem...)
Do this instead:
    public void getData(String a){
        PreparedStatement p;
        String strQuery = "select count(*) the_count from customer where id = ?";
        try {
         //create a prepared statement object to execute sql statements, it's better, faster, safer
         p = c.prepareStatement(strQuery);
            // bind the parameter value to the "?"
            p.setInt(1, Integer.parseInt(a) );
            //execute the query
            ResultSet rs = p.executeQuery( );
            // if the query doesn't throw an exception, it will have exactly one row
            rs.next();
            System.out.println("i am testing");
            if (rs.getInt("the_count") > 0 ) {
            // it's there, do what you need to...
         else
              JOptionPane.showMessageDialog(null,"I could not find the value");
        catch (SQLException e) {
             // JOptionPane.showMessageDialog(null,"You may enter wrong id");
             // if you get an exception, something is really wrong, and it's NOT user error
        // always, always, ALWAYS close JDBC resources in a finally block
        finally
            p.close();
    }First, this is simpler and easier to read.
Second, this retrieves just the needed information, whether or not the id is in the database. Your way will get much much slower as more data goes into the database. My way, if there is an index on the id column, more data doesn;t slow it down very much.
I've also left some important points in comments.
No guarantees that there isn't a dumb typo in there; I didn't actually compile it, much less test it. It's at least close though...

How to check the value of "The Interrupt Status Flag"?

Hi, thank you for reading this post!
Invoking Thread.interrupt() sets the value of the Interrupt Status Flag.
Just wondering if there is a Java method to check the value of this flag? Or is using isInterrupted() or interrupted() the only way to check?
http://download.oracle.com/javase/tutorial/essential/concurrency/interrupt.html
Thank you in advance for your help!
Eric

Below is the full code. As soon as the Thread.sleep() is taken out in main(), the interrupt is detected in the child thread. But if the sleep() stays, then the child thread goes into an infinite loop. It's not detected the interrupt.
//ParentInterruptChildThreadCatchedDemo.java
//Program function: This program demonstrates the parent thread (main()) interrupting a child thread (thread1).
//Threaded class
class TryThread extends Thread {
     //fields
     private String threadname;
     private long aWhile;
     //Constructor
     public TryThread(String tname, long delay) {
          threadname = tname;
          aWhile = delay;
     //run() method
     public void run() {
          while(!Thread.interrupted()) {
               //Do work
          try {
               System.out.println(Thread.currentThread().getName() + " was just interrupted!");
               throw new InterruptedException();
          } catch(InterruptedException e) {
               //System.exit(1);
               return;
public class ParentInterruptChildThreadCatchedDemo {
     public static void main(String[] args) {
          Thread thread1 = new TryThread("thread1", 2000L);
          thread1.start();
          try {
               System.out.println("main() goes to sleep for 10 second.");
               Thread.sleep(10000);
               System.out.println("Statement after main() sleep().");
          } catch(InterruptedException e) {
                e.printStackTrace();
             //Interrupt thread1
              int interruptFlag = 5;
              for(int i=0; i<11; i++) {
                   if(i == interruptFlag) {
                        System.out.println("Condition met, going to interrupt thread1 ...");
                        thread1.interrupt();
                        System.out.println("Thread1 interrupted!");
              System.out.println("Ending main()");
/*Output:
main() goes to sleep for 10 second.
Statement after main() sleep().
Condition met, going to interrupt thread1 ...
Thread1 interrupted!
Ending main()
INFINITION LOOP
*/

How to store the value in table

Hi All,
I ve a requirement where im adding a check box on a seeded supplier_create page via personalization. The seeded page contains only a root AM and a root controller.The table which stores the supplier details does not have a dff.so i have to store a yes or no value and a foreign key ref into a custom table to map both the tables. the rootAM is actually calling the underlying seededVO to create a row in the database.Now how can I insert the yes/no and the foreign key values into my custom table??
Thanks.

Isn't there any other column in the table which you can use?
Anyway you can call a PLSQL API (to create a row in the Custom Table and store the value and also to make a foreign key join therein). This PLSQL can be called from the Controller (extend the standard Controller).
Now when you come to the Page, either you substitute the standard VO, or easier still (since I assume checkbox is on the Page and not in the table), you can call a PLSQL function and get the value of the checkbox. May be you can also create a dymanic VO and get the value from the Custom table for the current standard table row.
Please do a compete thinking on the idea above and do let me know where you forsee issues. The above solution focusses more on PLSQL API invocations and thus decreases the need for Substitutions.
Thanks
Sumit

Commit not allowed in Trigger then how to store the values in table

Hi,
Database trigger not allowed to COMMIT in it (directly) or in procedure which is calling from the Trigger. it gives error.
so my question is:-
1)How Database internally store the INSERT AND UPDATE value in table which is written in procedure without COMMIT?
2) Is it necessary to write COMMIT in procedure using PRAGAMA AUTONOMOUS TRANSACTION to store inserted or updated value in table?
Thanks in advance.

Hi,
A trigger is designed to be a part of a transaction, not it's end.
It is like following these steps (not really accurate, but should give an idea):
1. programA issues INSERT statement on tableA
2. 'control' goes over to the database
3. constraint checks happen
4. the associated triggers on tableA do their work (e.g. fetching a sequence value for a primary key)
5. 'control' goes back to programA
6. programA decides if a commit (no error occurred) or a rollback (error case) has to be issued.
Did this help? Probably not, I'm not happy with what I wrote, but anyway... :)

How to justify the values in table using report generation tool kit

Hi
How can we align the values in excel table using report generation toolkit.
like left,right,center.
Regards,
hari
Attachments:
Report_excel.vi ‏34 KB
New Bitmap Image.JPG ‏134 KB

Hi,
A trigger is designed to be a part of a transaction, not it's end.
It is like following these steps (not really accurate, but should give an idea):
1. programA issues INSERT statement on tableA
2. 'control' goes over to the database
3. constraint checks happen
4. the associated triggers on tableA do their work (e.g. fetching a sequence value for a primary key)
5. 'control' goes back to programA
6. programA decides if a commit (no error occurred) or a rollback (error case) has to be issued.
Did this help? Probably not, I'm not happy with what I wrote, but anyway... :)

How to get the values from table SKB1 R/3 to SRM

Hi Gurus,
My requirement is to get all the values from the table SKB1 to SRM (i.e. in to an internal table) for doing some validation(G/L account XXXXXX requires an assignment to a CO objectXXXXXX.)
Like wise I have many tables for doing validation in SRM
Help me how to get this, suggest me any Function module with sample code.
OR
Any Standard FM which will give all the values of the fields in the table SKB1 when I pass the key fields G/L account & company code alone so that I can improve the performance.
Suggest me.
Regards
Paul

Hi,
You can use the FM 's META_READ_TABLE Or RFC_READ_TABLE
Which SRM / Backend system version are you using ?
Are you taking care of the Importing paramater - DELIMITER in this case.. ??*
See related links ->
Re: Retrieving data from R/3 into SRM
Re: Product Search TIME lag
Else you can just call the remote enabled FM "BAPI_GL_ACC_GETDETAIL" from SRM.
BR,
Disha.
Do reward points for useufl answers.

Please help..it's Urgent..How to fetch the value from table row from Page

Hi,
I have created a table with 2 LOV's , LOV2 is dependent on LOV2.
Here I can not use the general Dependent LOV concept, as these values are coming from 2 different LookUps.
I am not able to fetch the user input for LOV1 (from page) .that is why not able to set the where cluse fro 2nd LOVVO.
I have used this code:
if ("ViolationCat".equals(lovInputSourceId)) {
OAMessageLovInputBean msglov =
(OAMessageLovInputBean)webBean.findChildRecursive("ViolationCat");
// String p_violation_category = "'"+(String)msglov.getValue(pageContext)+"'";
String p_violation_category =
(String)msglov.getValue(pageContext);
// System.out.println(" p_violation_category =" +
// p_violation_category);
String v_violation_category = "";
//System.out.println("vcat=" + vCat);
OAViewObject violationVO =
(OAViewObject)am.findViewObject("SNI_Violation_DtlsVO2");
Number vcatViolationIdnum =
(Number)violationVO.getCurrentRow().getAttribute("ViolationId");
String vcatViolationId = "" + vcatViolationIdnum;
pageContext.putTransactionValue("vcatViolationId",
vcatViolationId);
pageContext.putTransactionValue("p_violation_category",
p_violation_category);
String query =
" SELECT LOOKUP_CODE, \n" + " MEANING, \n" +
" LOOKUP_TYPE \n" +
" FROM apps.fnd_lookup_values \n" +
" WHERE LOOKUP_TYPE ='SNI_VIOLATION_CATEGORY' AND MEANING=?";
PreparedStatement ps = txn.createPreparedStatement(query, 1);
try {
ps.setString(1, p_violation_category);
ResultSet rs = ps.executeQuery();
//System.out.println("before while,");
// rs.next();
// v_violation_category = rs.getString("LOOKUP_CODE");
// System.out.println("v_violation_category="+v_violation_category);
while (rs.next()) {
//System.out.println("inside while");
v_violation_category = rs.getString("LOOKUP_CODE");
// System.out.println("v_violation_category=" +
// v_violation_category);
ps.close();
} //try ends
catch (Exception e) {
e.getMessage();
//System.out.println("in catch.." + e.getMessage());
OAViewObject subCatVO =
(OAViewObject)am.findViewObject("SNI_ViolationSubCategoryVO1");
//System.out.println("get VO before where clause: subCatVO::"+subCatVO.getQuery());
subCatVO.setWhereClause("LOOKUP_TYPE like '%SNI_VIOL_SUB_CAT_" +
v_violation_category + "'");
System.out.println("after set where clause VO: subCat VO::" +
subCatVO.getQuery());
subCatVO.executeQuery();
// System.out.println("query of subCat VO::" +
// subCatVO.getQuery());
//End of sub category Validation
It is working fine only for the 1st row of teh table.
I have tried to fetch the value using :
String violationCategory = (String)violationVO.getCurrentRow().getAttribute("ViolationCategory");
String violationSubcategory = (String)violationVO.getCurrentRow().getAttribute("ViolationSubcategory");
But it is fetching null value.
Please tell me how can I able to fetch the values.

Hi
in your scenarion,first u have to identify the particular row of table where the changes is being made ,u have to use this code .when u select the lov ,first it will give the row refernce and then u have to catch the lov event
OAApplicationModule am =
(OAApplicationModule)pageContext.getApplicationModule(webBean);
String event = pageContext.getParameter("event");
if ("<ItemPPREventName>").equals(event))
// Get the identifier of the PPR event source row
String rowReference =
262
pageContext.getParameter(OAWebBeanConstants.EVENT_SOURCE_ROW_REFERENCE);
Serializable[] parameters = { rowReference };
// Pass the rowReference to a "handler" method in the application module.
am.invokeMethod("<handleSomeEvent>", parameters);
In your application module's "handler" method, add the following code to access the source row:
OARow row = (OARow)findRowByRef(rowReference);
if (row != null)
thanx
Pratap

How to check the value of a string is numeric, alphanumeric or characters?

Hi All,
I have a task to validate an employee Id. Suppose the employee Id is E121212. Now as per the validation rule I need to check "the first letter of the employee Id is a character and rest are numbers." How can I do this? Please reply.
Thanks & Regards
Bibhuprasad Soumyaranjan

>
Hi Bibhuprasad,
I have a task to validate an employee Id. Suppose the employee Id is
E121212. Now as per the validation rule I need to check "the first letter
of the employee Id is a character and rest are numbers." How can I do this? Please reply.Everyone else has proposed REGEXP_LIKE, and while it's very powerful, it is
also very CPU intensive. You should always use Oracle's string functions
instead of Regular Expressions if possible.
I played around with
WITH data
     AS (SELECT 'E11212' s FROM DUAL
         UNION ALL
         SELECT '121212' FROM DUAL
         UNION ALL
         SELECT 'EE121212' FROM DUAL
         UNION ALL
         SELECT 'É121212' FROM DUAL
         UNION ALL
         SELECT 'E1EEEEEEEE' FROM DUAL
         UNION ALL
         SELECT 'E134343444' FROM DUAL)
SELECT s,
CASE
    WHEN (SUBSTR(s, 1, 1) BETWEEN 'A' AND 'Z') -- AND (TO_NUMBER(SUBSTR(s, 2, LENGTH(s)), 999999) > 111111)
      THEN 'Correct Format'
    ELSE
      'Incorrect Format'
    END mySSN,
    SUBSTR(s, 2, LENGTH(s)) AS theNumber
FROM data;I think that this can be worked so that it willl go what you require without using
REGEXP_LIKE.
HTH,
Paul...
Bibhuprasad Soumyaranjan

How to check the value entered in one co from anethor CO

Dear All,
I have a Debrief screen in which one main region is attached to CO1 and a tab region is attached to CO2, the tab region is an independent region in the main rdebrief main RN,
Here i have a requirement if one of the field of the tab region is entered , that has to be captured in the Debrief main Region CO.
could you help in assisting this.
Regards
AK

AK,
You can get handle of any item in the page from the mainCO by getting handle of the bean. You will have to get the handle of the tabbed region and get the handle of the corresponding field.
Alternatively, you can get the value from the VO Attribute, if the field is mapped to a VO attribute.
Cheers
AJ

How to check the values of view object?

Hi all,
I created a new view object by right clicking my application module. Now when I try to retrieve values
of the attributes of the view object I am getting null pointer exception. How do I check whether the view has
some values in it or not manually using select statement ? I try to find the view in my database at database navigator
but it was not there. Kindly help me out in this.
Thanks,
Phanindra.
Edited by: 887737 on Oct 19, 2011 12:53 AM

Hi,
Right click on application module(yourAM in model project) and press Run,Then you can confirm whether your ViewObject is working or not.
Note:
Generally create viewObject using EO based or Query based how did you create viewObject
See:
http://download.oracle.com/otn_hosted_doc/jdeveloper/1012/bc4j/intro/bc_avo.html
http://www.adftips.com/2010/09/adf-model-creating-view-object-vo.html

How to check the value of the structure component at run time

Dear Friends,
Kindly, through some idea for the below query:
Step 1: I have a structure name as STRUCT with components COMP1, COMP2, COMP3,......, COMP99. At run time in this structure few components may have values and few may not have.
Step 2: Now I have a variable of type char name as LV_CHAR, at run time this variable may have value as any of the structure components given in the above step such as COMP1 or COMP2 or .....or COMP99.
Step 3: Let us assume the variable LV_CHAR have value COMP11 and now I need to check whether the strucutre componet STRUCT-COMP11 is initial or not using this variable.
Could you please give me the steps what needs to be done to handle it.
Thanks & regards,
Mallikarjuna M.

PatanGova wrote:
Hi,
Can someone help me out to divide a Hexadecimal number say"ABCD" and display
1) each value of hexadecimal number like 'A','B','C','D' in separate indicators and
2)each value of hexadecimal number like 'A','B','C','D' into their respective decimal number and to show in separate indicators.
Thanks.
That has absolutely nothing to do this thread. Start a new thread.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How to check a value for paramter query

I am passing a paramter value from my text box to my sql statement and I would like to check if the value is entered into a text box. If you have any idea please share it with me, i have been struggling with this for many days.Code below is how i try to check if the value is entered but I do not know how to check the value in the :VendorName
thanks
If Not txtVendorName.Text = "" Then
Sql = Sql & " AND (Upper(V.VNAMEL) LIKE '%' || Trim(Upper(:VendorName))|| '%') "
End If

Sorry guys english is not my first language and i will try to be clear and specific.
I have a search page where customeres can do searching either using a text box or two dropdowns i have on my page. they have the option of doing search either using a text box or dropdowns or both.Everything seems to work fine but if users does not leave the text box blank. but they leave the text box blank and do searching using the two dropdowns then the page comes up empty and i checked my query and i should get a value. Attacehed my code for you to look at it.
<pre>
Sub VendorSearch()
gvSearch.Visible = True
Dim MinPDate As String = drPur.SelectedItem.ToString
Dim MaxMDate As String = drPurM.SelectedItem.ToString
Dim liThisOne As ListItem
Dim strState As String = ""
For Each liThisOne In lstState.Items
If liThisOne.Selected Then
strState = strState & "'" & liThisOne.Value & "'" & ","
End If
Next
Dim Sql As String = " SELECT distinct V.VENDOR ""Vendor Id"",R.ADDRNUM,V.VNAMEL ""Vendor Name"",R.AADDR1,R.ACITY,R.VASST1, "
Sql = Sql & "R.ASTATE State,R.AZIPCODE, to_char(Max(P.DATEPUR),'YYYY/DD/MM') ""Plan Purchased Date"" , "
Sql = Sql & "TRIM (r.aaddr1 || decode(trim(r.aaddr2),null,'',' - ') || r.aaddr2) Address,"
Sql = Sql & " substr(decode(trim(r.vasst1),null, 'N/A','000/000-0000?','N/A','000/000-0000','N/A', r.vasst1),1,12) Fax, "
Sql = Sql & " substr(decode(trim(r.aphone),null, 'N/A','000/000-0000?','N/A', r.aphone),1,12)Phone "
Sql = Sql & "FROM VENDOR V,VENDADDR R, PLANHOLD P "
Sql = Sql & "WHERE V.VENDOR = R.VENDOR AND P.VENDOR = R.VENDOR "
Sql = Sql & " AND (P.DATEPUR >= TO_DATE('1999-01-01','YYYY-MM-DD')) "
Sql = Sql & "AND P.DATEPUR In ( select Max(P.DATEPUR) from PLANHOLD P where P.vendor = R.VENDOR) "
'If txtVendorName.Text <> "" Then
' Sql = Sql & " AND (Upper(V.VNAMEL) LIKE '%' || Trim(Upper(:VendorName))|| '%') "
'End If
If (strState.Length > 0 And lstState.SelectedIndex <> 0) Then
strState = Left(strState, strState.Length - 1)
strState = "(" & strState & ")"
Sql = Sql & "AND R.ASTATE IN " & strState
End If
If (drPur.SelectedIndex <> 0 And drPurM.SelectedIndex <> 0) Then
Sql = Sql & " AND to_number(to_char(p.datepur, 'YYYY')) between " & "'" & MinPDate & "'" & " AND " & "'" & MaxMDate & "'"
End If
' Dim Para As String
' SqlDataSource1.SelectParameters.
If Not txtVendorName.Text = "" Then
Sql = Sql & " AND (Upper(V.VNAMEL) LIKE '%' || Trim(Upper(:VendorName))|| '%') "
End If
'If Not IsDBNull(SqlDataSource1.SelectParameters(":VendorName")).val Then
' Sql = Sql & " AND (Upper(V.VNAMEL) LIKE '%' || Trim(Upper(:VendorName))|| '%') "
'End If
Sql = Sql & " AND V.VOBSOLET = 'N' "
Sql = Sql & "GROUP BY V.VENDOR, R.ADDRNUM,V.VNAMEL,R.AADDR1,R.AADDR2,R.ACITY,R.ASTATE, R.AZIPCODE, R.APHONE, R.VASST1, P.DATEPUR "
Sql = Sql & "ORDER BY V.VENDOR "
Response.Write("Sql " & "<br/>" & Sql & "<hr/>")
SqlDataSource1.SelectCommand = Sql
End Sub
</pre>

Check the Existance of Table

Hi,
How to check the Existance of table, My require ment i have two tables lets say A And B, If table B does not exist then delete records in table A.
Can any one tel me how to write a query.
Thanks in Advance

hi,
whether your requirement is to check the existence of table B in the entire database or only in your schema.
because:
the user_tables contains the tables owned by the owner of the schema,
and all_tables caontains the tables that can be access by you,
and dba_tables contains all teh tables in your database.
so based on your req query any one of the table and check as suggested earlier by others.
and the 'tab' table also shows if there is any synonym with the table name as 'B'.
so if you are going for 'tab' table then also specify the column "TABTYPE = 'TABLE' ".

How to check the value in Table CDPOS

Similar Messages

Maybe you are looking for