How to choose data in file adapter?

create a xml file in source folder in local source location and pick it up using file adapter in BPEL and deliver it to Target location.

Similar Messages

How to handle large data in file adapter

We have a scenario Proxy -> PI -> File Sever using File adapter.
File adapter is using FCC for conversion.
recently we had wave 2 products live and suddenly for this interface we have increase in volume of messages, due to which File adapter is not performing well, PI goes slow or frequent disconnect from file server problem. Due to which either we will have duplicate records in file or file format created is wrong.
File size is somewhere around 4.07 GB which I also think quite high for PI to handle.
Can anybody suggest how we can handle such large data.
Regards,
Vikrant

Check this Blog for Huge File Processing:
Night Mare-Processing huge files in SAP XI
However, you can take a look also to this Blog, about High Volume Messages:
Step-by-Step Guide in Processing High-Volume Messages Using PI 7.1's Message Packaging
PI Performance Tuning Best Practice:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2016a0b1-1780-2b10-97bd-be3ac62214c7?QuickLink=index&overridelayout=true&45896020746271

Empty file picked although file have lot of data in file adapter SAP PI

Hello All,
We are facing the weired behaviour of SAP PI file adapter channel.
In without mapping Scenario of 7.31
At some time whole file is archived properly in archive folder but in SAP PI log we can see the file size 0 bytes.
And at received side empty file will be sent.
But in actual there is lot of data in the file.
The same file triggered next time then it working fine.archived and sent as it is.
So can anybody help me for this ?what is the issue why sometime file with no data is picked by PI?
If file is pick up by PI before it is written completely by third party then is it possible that archived file will have all data as it although processed empty ?
Thanks in advance,
Anant

Hi,
Thanks for reply.
I know this is common issue of file picking before completing the process of file writting and also i can use Msec to wait before modification check for avoiding this but
my question is how the archived folder have the file with all data that sender is sending.
So is it possible that empty file (before compete writting )is picked up by sap pi and then after completing the picking process it will archive the file that is completely written by third party in source folder.
In other way file picking & File archiving is separate process means file that is picked is not archived but once pi processed the file then it will again check the source folder and archive and delete the same file.
Thanks
Anant

How to set "lastFieldsOptional" in File Adapter

Hy,
somebody could tell me how can set the parameter "lastFieldsOptional" in FilesAdapter. have the problem that my last two fileds in incoming files sometimes are not insert and the "endlines" character also insert.
Thank's
Mati

Hi Mattia,
Please go thru these links for the step by step procedure to do content conversion:
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/sap.user72/blog/2005/01/06/how-to-process-csv-data-with-xi-file-adapter
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
http://help.sap.com/saphelp_erp2005/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
While doing content conversion you have to mention the field names in header of data type: fieldNames. Hence if the key field is not present it will throw an error in adapter monitoring, FIELD NOT FOUND.
To make note mapping cannot be performed with a flat file as XI understands only XML. Hence content conversion required.
I hope the links provided will help you set the parameter "lastFieldsOptional" in the File Adapter.
Regards,
Abhy
PS: AWARD POINTS FOR HELPFUL ANSWERS.

Wrting zip Data using File adapter

Did any one tried or implemented writing zip/gz file using File adapter.
I know how to write opaque data using Base64Binary. But i am not getting on how to use file adapter for writing zip file.
Any help / suggestions are greatly appreciated.
Thanks !!

Thanks for the reply, have been using opaque for a while now and know the read & write for that.
My problem is i am not able to get how i can write compressed data , writing binary data is fine i can use string->encode->base64binary->opaque and can write that.
But that will not be the compressed form.
Thanks !!

How to create Headervariable for File adapter in 11g SOA Suite?

Hi All
My process in reading file and I wanted to know the exact name of the File.
In 10g, we have fileAdapterInboundHeader.wsdl and create HeaderVariable using message type used in this wsdl and can get file and directory name in this variable But in 11g we dont have any wsdl like this.
Can anybody give me some idea how to create Headervariable for Inbound file adapter to get file name?
Thanks
Vibzz

Hi,
Look at this document : [Oracle JCA Adapter for Files/FTP|http://download.oracle.com/docs/cd/E12839_01/integration.1111/e10231/adptr_file.htm#CIAFJCCE]
Romain.

How to transformed data from File to DB but the data to be insert two tables parallel?

Hi friends ,I am new to Oracle SOA ,I have one requirement for the project
actually in these project
1.I have to read three different types of files (Employee info,Purchase Order Info,Salaes Order Info) through file adapter these records are to be store in data base
transaction table.In these transaction table contains WHO columns and payload with clob data type which contains each record in xml form.
2. Now I have to take these payload data which is in xml form and store in the respective table(employee or PO or SO) .I have to call these in dynamically.
so please give me ideas and suggesstions ,,
thanks in advance

Roger,
I don't know about simple way to load data from file into a table using button from your application,
Maybe some piece of PL/SQL code with UTL_FILE or DBMS_LOB, or you can try to upload file to database using Apex "File browse" item, and then do some processing with DBMS_LOB... but it will require some work...
Maybe someone else could advice with some simple method I don't know...
However loading files using Apex Load Utility is quite easy.
You can use something like this to load data to views created on remote tables:
CREATE TABLE local_tmp_table AS SELECT * FROM view_on_remote_table WHERE 1=0;
--load data from file to created table using Apex Load utility
INSERT INTO view_on_remote_table SELECT * FROM local_tmp_table;
COMMIT;
DROP local_tmp_table;Or without views:
CREATE TABLE local_tmp_table AS SELECT * FROM remote_table@dblink WHERE 1=0;
--load data from file to created table using Apex Load utility
INSERT INTO remote_table@dblink SELECT * FROM local_tmp_table;
DROP local_tmp_table;Regards
Tomasz
Message was edited by:
Tomasz K.

How to write data to file Java ME cldc 1.1 midp 2.0?

I newly in java me, please help me.
I make project in NetBeans 7.0.1. and use cldc 1.1 midp 2.0.
I want to write data to the file.
How can I do it?
I try to use FileOutputStream. But it don't exists in java.io
NetBeans shows me only this list of classes and interfaces in java.io:
ByteArrayInputStream, ByteArrayOutputStream, DataInput, DataInputStream, DataOutput, DataOutputStream, InputStream, InputStreamReader, OutputStream, OutputStreamWriter, PrintStream, Reader, Writer.
Why it so short?
And how I can write data to file?
Data can be array of bytes (byte[]) or Object it better.

You must use JSR 75: FileConnection. Please check the following article "Getting Started with the FileConnection APIs":
http://developers.sun.com/mobility/apis/articles/fileconnection/
Be sure to use FileSystemRegistry.listRoots().
And welcome to Java ME development. :)

Interpreting Multibyte data with File Adapter in BPEL Process

Hi all,
I am trying to interpret multibyte data file using native schema file.The file is defined as below:-
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
targetNamespace="http://TargetNamespace.com/ftpinbound"
xmlns:tns="http://TargetNamespace.com/ftpinbound"
elementFormDefault="qualified"
attributeFormDefault="unqualified" nxsd:encoding="MS932" nxsd:stream="bytes" nxsd:version="NXSD">
<xsd:element name="root">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="Header" minOccurs="1" maxOccurs="1">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="RecType" type="xsd:string" nxsd:style="fixedLength" nxsd:length="5"/>
<xsd:element name="OperMode" type="xsd:string" nxsd:style="fixedLength" nxsd:length="1"/>
<xsd:element name="SendSideCompCode" type="xsd:string" nxsd:style="fixedLength" nxsd:length="12"/>
<xsd:element name="RecvSideCompCode" type="xsd:string" nxsd:style="fixedLength" nxsd:length="12"/>
<xsd:element name="BPID" type="xsd:string" nxsd:style="fixedLength" nxsd:length="8"/>
<xsd:element name="InfoTypeCode" type="xsd:string" nxsd:style="fixedLength" nxsd:length="4"/>
     <xsd:element name="CreateDate" type="xsd:string" nxsd:style="fixedLength" nxsd:length="12"/>
<xsd:element name="SendSideSysCode" type="xsd:string" nxsd:style="fixedLength" nxsd:length="12"/>
<xsd:element name="RecvSideSysCode" type="xsd:string" nxsd:style="fixedLength" nxsd:length="12"/>
<xsd:element name="Preliminary" type="xsd:string" nxsd:style="fixedLength" nxsd:length="458"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="Lines" minOccurs="1" maxOccurs="unbounded" nxsd:style="array" nxsd:arrayTerminatedBy="(">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="DataProcessNo" type="xsd:string" nxsd:style="fixedLength" nxsd:length="5"/>
<xsd:element name="InfoClassCode" type="xsd:string" nxsd:style="fixedLength" nxsd:length="4"/>
<xsd:element name="DataCreateDate" type="xsd:string" nxsd:style="fixedLength" nxsd:length="6"/>
<xsd:element name="SellerCode" type="xsd:string" nxsd:style="fixedLength" nxsd:length="12"/>
<xsd:element name="OrderRecvPartyCode" type="xsd:string" nxsd:style="fixedLength" nxsd:length="12"/>
<xsd:element name="PODeptCode" type="xsd:string" nxsd:style="fixedLength" nxsd:length="8"/>
<xsd:element name="ProductNo" type="xsd:string" nxsd:style="fixedLength" nxsd:length="19"/>
<xsd:element name="CorrectionCode" type="xsd:string" nxsd:style="fixedLength" nxsd:length="1"/>
<xsd:element name="SupplyClass" type="xsd:string" nxsd:style="fixedLength" nxsd:length="1"/>
<xsd:element name="Buyer" type="xsd:string" nxsd:style="fixedLength" nxsd:length="7"/>
<xsd:element name="MatStdDimension" type="xsd:string" nxsd:style="fixedLength" nxsd:length="20"/>
<xsd:element name="Package" type="xsd:string" nxsd:style="fixedLength" nxsd:length="7"/>
<xsd:element name="Remarks" type="xsd:string" nxsd:style="fixedLength" nxsd:length="30"/>
<xsd:element name="ConTaxClass" type="xsd:string" nxsd:style="fixedLength" nxsd:length="1"/>
<xsd:element name="SuppDeptCode" type="xsd:string" nxsd:style="fixedLength" nxsd:length="8"/>
<xsd:element name="SuppProdName" type="xsd:string" nxsd:style="fixedLength" nxsd:length="30"/>
<xsd:element name="SuppProdNameCode" type="xsd:string" nxsd:style="fixedLength" nxsd:length="25"/>
<xsd:element name="SuppUnit" type="xsd:string" nxsd:style="fixedLength" nxsd:length="3"/>
<xsd:element name="SuppUnitPrice" type="xsd:string" nxsd:style="fixedLength" nxsd:length="13"/>
<xsd:element name="PODeptName" type="xsd:string" nxsd:style="fixedLength" nxsd:length="20"/>
<xsd:element name="Buyer_K" type="xsd:string" nxsd:style="fixedLength" nxsd:length="14"/>
<xsd:element name="MatStdDim_K" type="xsd:string" nxsd:style="fixedLength" nxsd:length="40"/>
<xsd:element name="Remarks_K" type="xsd:string" nxsd:style="fixedLength" nxsd:length="60"/>
<xsd:element name="SuppDeptName_K" type="xsd:string" nxsd:style="fixedLength" nxsd:length="40"/>
<xsd:element name="SuppProdName_K" type="xsd:string" nxsd:style="fixedLength" nxsd:length="60"/>
<xsd:element name="PODeptName_K" type="xsd:string" nxsd:style="fixedLength" nxsd:length="40"/>
<xsd:element name="CountingMTHs" type="xsd:string" nxsd:style="fixedLength" nxsd:length="4"/>
<xsd:element name="SuppProdNvAmount" type="xsd:string" nxsd:style="fixedLength" nxsd:length="10"/>
<xsd:element name="SupProdSingleItem" type="xsd:string" nxsd:style="fixedLength" nxsd:length="12"/>
<xsd:element name="SupProdWIP" type="xsd:string" nxsd:style="fixedLength" nxsd:length="12"/>
<xsd:element name="SupProdSpoiledQnty" type="xsd:string" nxsd:style="fixedLength" nxsd:length="12"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="Trailer" minOccurs="1" maxOccurs="1">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="RecType" type="xsd:string" nxsd:style="fixedLength" nxsd:length="4"/>
<xsd:element name="NoOfRec" type="xsd:string" nxsd:style="fixedLength" nxsd:length="5"/>
<xsd:element name="Preliminary" type="xsd:string" nxsd:style="fixedLength" nxsd:length="526"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
This schema works fine and data is produced as expected when I am using "chars" as the stream option.However I can't use "chars" as the stream option and need "bytes" as the stream option. However when mentinong "bytes" option the following exception is generated:
Charset "MS932" not supported.
Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable.
     at oracle.tip.pc.services.translation.xlators.nxsd.ByteReader.<init>(ByteReader.java:87)
     at oracle.tip.pc.services.translation.xlators.nxsd.NXSDTranslatorImpl.createScanner(NXSDTranslatorImpl.java:800)
     at oracle.tip.pc.services.translation.xlators.nxsd.NXSDTranslatorImpl.translateFromNative(NXSDTranslatorImpl.java:440)
     at oracle.tip.adapter.file.inbound.ProcessWork.doTranslation(ProcessWork.java:504)
     at oracle.tip.adapter.file.inbound.ProcessWork.processMessages(ProcessWork.java:266)
     at oracle.tip.adapter.file.inbound.ProcessWork.run(ProcessWork.java:179)
     at oracle.tip.adapter.fw.jca.work.WorkerJob.go(WorkerJob.java:51)
     at oracle.tip.adapter.fw.common.ThreadPool.run(ThreadPool.java:272)
     at java.lang.Thread.run(Thread.java:595)
Please let me know can I at all read a file in byte format with File adapter using a desired encoding style?This is littile urgent.
Thanks

Hi James,
Yeah I tried that too and it gave the same error. And I need to encode with MS932 only since the data will contain Japanese characters and this encoding is identified both by windows and non-windows OS.
Please can you advice what can I do since the requirement is urgent.
Thanks

How to insert data from file into matlab script node

I have interfaced input data from file to be processed using matlab script node. But the problem is that I could not capture the multiple data into matlab script node and to convert it into matrix. Further to this I need to process the data by plotting graphs from it. Thank you in advance for the advice

Zarina,
To clarify your problem, you have a script node contaning your Matlab code. Are you then using the standard LV functions to load in your data from a file and pass it into the script node?
Regards
Tristan

Need how to configuration on Receiver File adapter

Hi,
I am working on File to File scenario. I need to create a file in output directory with time stamp.
I am also need to create File output directory.
I used create target directory. But the file is not creating in the directory.
Please help me on this issue.
Thanks,
Swathi

Hi Swathi,
1. To have the file with the Timestamp, use the option "Add Timestamp" in File construction mode.
2. Check the receiver communication channel and in MONI. If the file is not created and is successful in MONI, then the message might stuck in Queue. Check the queues.
Ensure the provide target directory path is correct.
Check this: /people/shabarish.vijayakumar/blog/2007/07/26/troubleshooting-the-file-adapter-last-updated-on-02-july10
Thanks,

How to dump configuration of File adapter

Hello,
Can any body help me out for preparing configuration dump (no screenshot) of the
respective communication channel, esp. with Sender FILE Adapter.
Best regards,
Jilan Bhasha

Hi Jilan -
For the file adapter, you can get a text dump of the configuration at the following location:
<i><sapmnt>/<SID>/DVEBMGS<XX>/j2ee/cluster/server<X>\log\services\com.sap.aii.adapter.file.svc</i>
<sapmnt> is usually <i>/usr/sap</i>
Obviously, you need file system access. If you don't have it, ask your basis team.
You can do this for the JDBC adapter as well.
See Note 824236 for more details.
Regards,
Jin

How to insert data from file to table??

I need to know that how can i insert data in multiple column through file. I can simply insert data in one column table but couldnt find out the way to put data in all column.
My data store in a file
************************************************text.txt***************
133, shailendra, nagina, 14/H, 45637, 9156729863
**************************************************************my_data(table)**********
trying to insert into below table...
id, name, last_name, add, pin. mob
Let me know if anything else needed..:)

Hi Shailendra,
Actually, in SQL Developer, you can open a connection to the target schema, right-click on the Tables node in the navigator tree view, select Import Data, then use the Data Import Wizard. It is extremely flexible. It looks like you have a comma separated variable file, so if you select Format: csv and Import Method: insert it will probably work just fine.
To minimize the chance of errors during import, pick a preview limit value so the wizard can examine the size and data type of all columns in as many data rows as possible, then review the data type/size for each column in the next wizard page and override as necessary. For date columns it is also important to choose the appropriate format mask.
Hope this helps,
Gary
SQL Developer Team

Oracle Business Intelligence How to choose data set based on a condition

Hi,
I am using Oracle Business Intelligence for creating reports, i am facing a situation where i have two quries (data sets in BI), one to display a Failure message and other to fetch data from the table to be displayed in the report.
The problem is i am unable to choose which data set to run based on a condition. How to use a condition based on which the dataset will be run
For example : i will read a table column value if it is 'S' means success, then i have to run the dataset to fetch the data from the table.
If the column value has 'F' then i have to run the dataset which will display failure message
Please let me know if any of you have any idea on this
Thanks in advance
Muthukumaran

Hi Chinna,
You have to use some scripting as well as coding to perform the tasks listed by you. First of all make your form Dynamic, In your Adobe lifecycle Designer, open your form,
Goto, File --> Form Properties,
Goto the Defaults tab,
Select "Dynamic PDF" for the XDP Preview Format:
Click OK.
This setting will now allow dynamicity in your Form, when you view it in PDF Preview tab.
For Hiding/Unhiding the fields/SF, you can use the presence property and set it based on the conditions. like:
if (this.rawValue == null)
TextField1.presence = "hidden";
For your second task, you may map a method corresponding to onSubmit event of the IF and write the code to create the workflow and make RFC call here.
For third one, you need to convert the PDFObject from Binary context into a byte array and save it at appropriate location.
Hope I have answered all your queries.
Cheers,
Arafat

How to get data from file and save it in my DB

Hi for all,
my problem is :
i have file in text format and this file have
data .
i want to insert this data into my database
using forms .
how i can do this .

Hello,
You can do this by :
1. Command Host and u excecute SqlLoader
Or
2. Read the text file sequentially with text.io and insert data while not eof.
Hope help u with this.
null

How to choose data in file adapter?

Similar Messages

Maybe you are looking for