Sales BOM - Components withdrawal from stock

Hi,
I'm new to Sales BOMs and would like to learn the following:
In a Sales BOM I have 3 components. At what stage should the quantity of these components be withdrawn (goods issued) from raw material stock? I have a few examples without any movements of the components, only the Sales material (header) which is shipped to the customer.
Thanks in advance for your help:-)
Br,
Lars

Hi Lars,
Sales BOM is nothing but a bundle of products to be sold together. When you deliver the sales order, it will withdrawal those components from stock.
Thanks,
Gordon

Similar Messages

  • Pick & Pack and Sales BOM components

    We have noticed that pick and pack will put sales BOM component items on the list even if all the component items are not available to complete the parent Sales Item. If we are not watchful, we can inadvertently ship a partial kit - i.e. ship only a left shoe if the right shoe to complete the pair happens not to be in stock.
    Does anyone know of a way to ensure that pick and pack only allows/recommends complete Sales BOM's? Same issue exists for Deliveries.

    Hai!
    SP_Trans is a Stored Procedure.
    Please check the Blog..
    Check this link for explanation of SP_Tranaction Notification Procedure https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e991e2b9-0901-0010-0395-ef5268b00aaf
    *Close the thread if issue solved.
    Regards,
    Thanga Raj.K

  • Sales BOM components on MD04

    Hi everyone,
    I would like to ask if it is possible to see the components of a Sales BOM on MD04? I created a scenario with a sales BOM that I explode on sales order, but only the High Level material of my BOM is visible on MD04.
    Is it possible?
    Thanks in advance...
    Jt

    Hi,
    If I am not wrong - as per the settings of the TOR(Transfer of Requirements)- the details in MD04 gets updated.
    In the Sale order TOR can be switched on/off by schedule line category.
    You can see the requirement type assigned to the item in the procurement tab of a sale order.
    For that particular requirement type - if Req. transfer is checked in the transaction OVZG, and for that particular item's schedule line category-  Req. Transfer needs to be checked in transaction VOV6.
    If this settings have done - it will transfer the requirements to MD04. Otherwise it won't.
    As of I know - Only main materials will be transferred to MD04. Because, the above mentioned settings will be maintained for main item only.
    If you want to transfer the sub item also - you need to maintain the above mentioned settings for the sub item also.
    Thanks,
    Venkatesh.S.P

  • Sales BOM components visible on forms...

    I have a client that has a wish list item, they would like the sales BOM component items to not show on Quotes, order acknowledgements and invoices but obviously need them to appear on the picking and packing documents along with the parent. Has anyone else run across this type of request? Is this something that can be accommodated in Crystal?
    Thanks much! Amy

    You can probably make it happen in Crystal.  Even in PLD, just make take those fields out from the form and only include them in the picking and packing documents.
    Regards,
    WB

  • Assigning informations in Sales Order for Sales BOM components with DI Server

    Hi,
    We are adding sales order in SAP B1 using DI Services(Order Service). In the Documents row, we are assigning only informations of the BOM parent and the child components are getting automatically added by the system, petty much the expected behaviour so far. But now, we want to assign a warehouse to the BOM parent and all of its children. How this information can be added? Is there any way to do so with the Add operation?
    Regards,
    Victor

    Dear Sanju,
    Could you please explain what you have done for the same?
    Thanks & Regards
    Piyush

  • Drop Ship processing for Sales BOM

    Hi,
    We have a requirement to have a Sales BOM drop shipped from a Vendor. Only the header material is relevant for pricing and purchase order. However, we have a business requirement to explode the sales BOM in the sales document and billing document to address statistical pricing requirements at the component level.
    Since only the header material is required in the PO, it has a billing relevance of 'F'. However, we have set the components to be relevant for order related billing. Standard SAP opens up the components for billing even though a vendor invoice for the header has not been received.
    Can copy control be used to control the components from being billed unless the header is billed AND the quantity of component materials modified based on the header material being invoiced ? Is it possible to only explode the sales BOM in the billing document using a billing document exit ?
    Would appreciate suggestions from the forum.
    Regards

    Hi
    The billing document creation can be controlled through the copying requirement in Copy Control of Billing documents.
    Transaction VOFM | Billing documents: Create a new requirement which prevents billing unless the parent item has the vendor invoice receipt.
    This requirement has to be then assigned to the respective billing and sales document type in copy control.
    Regards,
    Vinu

  • Issue of Components from Sales BOM where user warehouse is defaulted

    In 2007A, where the warehouse is different at row level for the parent item, the component items do not default to the same as the parent, and no warning message is produced. SAP say this is system behaviour as the components are shown on the form and can be changed in the form. In 2005A an Assembly BOM was used which would generate a warning, but no new Assembly BOM's can be created in 2007A. The warning is now only generated if the warehouse is changed in the table area of the form settings window.
    However, I believe they have not allowed for the use of the user defaults in this case.
    The purpose of the user defaults is to take away from the user the possibility of transacting an incorrect warehouse by accident. In order to control stock properly this is essential from a business process and a "best practice" perspective.
    The user is set to default to the warehouse they have access to, then the form settings are turned off for the warehouse so they cannot issue from other warehouses.
    If this is the case (as it is for all of our customers who have many branches) then they cannot update the child items to issue from their own location, and have no visibility that there is a problem until stock taking time.
    The purpose of a sales BOM is to allow for a sales process which requires assembly of several items at the point of sale, The most likely scenario in this instance then is that the child items will be in the same warehouse that the sale document is being recorded in, this should be the default position for the marketing document.
    The only workaround appears to be that a Sales Bom is required for each item for each warehouse, thereby increasing the size of the Item Master.

    THe issue is the same via the DI - add a sales BOM with a different warhouse to the BOM warehouse & the components are issued from the BOM warehouse, not the intended warehouse

  • How to transfer sales bom from SAP R/3 to APO?

    Hi Experts,
    I just want to ask how to transfer sales bom from R/3 to APO? if i change my bom usage to 5 and use this BOM in my Production version be enough to send it to APO?
    Also, this is my first time using sales bom, could you please help me understand how sales bom work in APO planning?
    Thanks so much.
    Mylene

    Hi Senthil,
    Thanks again for your reply. I was trying to CIF sales BOM in APO but only the header material are being created in APO. The component are not added in PDS. This is how I create it in SAP R/3:
    1. transaction cs01 -->  enter header material, plant and BOM USAGE =5
    2. inside cs01, i entered components, quantity for each components and ITEM category = L (stock item)
                            i also eneterd base quantity for header material
    3. create production version for header material with routing and this BOM
    4. create and activate material CIF model for header and components
    5. create and activate PDS CIF model for header and components.
    After doing all these steps, PDS is created in APO but I only have the header material (no components)
    I tried changing BOM to other bom usage and components were populated in PDS.
    Am i missing nay steps?  Thanks.
    Regards,
    Mylene

  • Sales BOM Header line item confirmed without components in Delivery

    Hi Experts,
    The issue is about the delivery is created with the single component for the Sales BOM where as it contains two.
    We have analyzed the issue and checked that the missing component would have not been available in the stock during the time when the delivery is created and hence is not included(Header material and single component is included in the Delivery).
    The user's concern is; when there is no stock for any one of the component, then it shouldn't have confirmed the header material. Kindly suggest.

    Hi Azam,
    It seems to me that you want to use Delivery Group for Sales BOM where If Mat A = Mat B + Mat C and Mat B Availability date is 20/07/2014 (DD/MM/YYYY) and Mat C availability is 25/07/2014 then Main line item should be confirmed with 25/07/2014.
    If any one sub Item is not available, then Any of the item from the Grouping should not be dispatched.
    If this is the requirement then, In Item Category (VOV7) for main Item update Create Delivery Group field with X and your requirement will be fulfilled.
    Do let us know the result after testing.
    Regards,
    MJ.

  • Sales BOM : Header item stock and cost

    Hello gurus,
    I'm very new for sales BOM and have one questions.
    We have material A and B (purchased from vendor).
    They will be assembled by 3PL company as C.
    Then we will sell C to the our customer.
    I want to set price/cost at the header item level.
    because we will sell material B free of charge.
    I've set C like below  
    1. Item category group. : ERLA
       Item category : TAQ
       Setting of A and B
        Item category group. : NORM
       Item category : TAE
    2. Then make BOM in tcode CS01 with C
        Material : C
        Plant: XXXX
        BOM Usage :5
        subitem : A, B
        Item category : N(Non-stock item)
    After then I tried to make a sales order
    with material C.
    I can get sub-items(A,B) successfully
    however system said there is no atp stock for C.
    How can I get stock of C from stock of A and B?
    And How can I set the cost of C with value of A+B?
    And How can I set the condition of C to calculate cost of C in header level?
    or can I set like
    price is determined in header level and cost is calculated in item level?
    Or please recommend nicer solution.
    Thank you very much.
    J.K.

    Hi Azam,
    It seems to me that you want to use Delivery Group for Sales BOM where If Mat A = Mat B + Mat C and Mat B Availability date is 20/07/2014 (DD/MM/YYYY) and Mat C availability is 25/07/2014 then Main line item should be confirmed with 25/07/2014.
    If any one sub Item is not available, then Any of the item from the Grouping should not be dispatched.
    If this is the requirement then, In Item Category (VOV7) for main Item update Create Delivery Group field with X and your requirement will be fulfilled.
    Do let us know the result after testing.
    Regards,
    MJ.

  • Sales BOM stock query

    Hello,
    I' am looking for a query wich gives me a report of the sales bom item with the total amount of stock of the salesbom item with the child items underneath it.
    Thanks
    Mark

    Sales BOM is not a stock item.  Therefore, there is no logic to count the Sales BOM stock.  However, if you like to know the virtual quantity of those quantities, you could try query like this:
    Select t1.Father, min(t2.onhand) 'On Hand'
    from dbo.oitt t0
    inner join dbo.itt1 t1 on t1.father = t0.code
    inner join dbo.oitm t2 on t2.itemcode = t1.code
    where t0.TreeType = 's' and t0.code like '[%0\]'
    group by t1.father
    Thanks,
    Gordon

  • SD Sales BOM and Stock Movement--Help please

    Hi,
    Scenario:
    Client is dealing with Value packs. i.e. He creates a finish good by using 2 finish goods as components by creating Sales BOM.
    Basic Requirement: To have component level treatment i.e. pricing delivery to be incorporated for components.
    Item cat grp selected as LUMF for BOM parent Item in material master.
    But the requirement is that stock movements should reflect for both parent as well as BOM materials upon PGI. Header stock is required to check the stock availibity.
    By this approach no movements can be seen for parent which will give a wrong picture of the stock positions for Parent Material.
    How this can be handled whereby we can see the stock movements for both Parent as well as components.
    Please suggest
    Regards,
    manOO

    Hi,
    Please Use Two Different Item Categories and Schedule Line Categories in this Scenarios and Please ensure that both should be relevant for Delivery.
    Hope this sloves your Puprose and Please Reward If Really Helpful,
    Thanks and Regards,
    Sateesh.Kandula

  • Purchase reports for components of production BOM Based on Its Sales BOM

    Hi all
    I have sales BOM and the components of Sales BOM are production items having Production BOM and the components of production BOM are purchase items
    My problem is when i create a sales order for my Sales BOM, i should be able to get a report for purchase items that is how much i have to purchase with out using MRP
    pls anyone help me with approbriate queries
    Thanks and Regards
    Boopathi.T

    Hi Boopathi,
    You may try this one:
    SELECT Distinct T1.Code, SUM(T0.Quantity * T1.Quantity) 'PO Qty', T2.DocNum
    FROM dbo.RDR1 T0
    INNER JOIN dbo.OITT T3 ON T3.TreeType = 'S' AND T3.Code = T0.ItemCode
    INNER JOIN dbo.ITT1 T1 ON T1.Father = T3.Code
    INNER JOIN dbo.ORDR T2 ON T2.DocEntry = T0.DocEntry
    WHERE T2.DocNum LIKE '[%0\]%'
    GROUP BY T1.Code, T2.DocNum
    Thanks,
    Gordon

  • Sales Order processing - Sale from stock

    Dear Gurus,
    What are the configuration steps involved in Sales Order Processing- Sales from Stock.
    Kindly let me know.
    Regards
    Prashant Ranalkar

    Go with Make To Stock scenario.  For configuration details, make a search in this forum.
    thanks
    G. Lakshmipathi

  • Switch Off rounding for BOM Components in Sales Order

    Hi all,
    We are using a multi-level sales BOM that has finished goods as components. These materials have a rounding profile attached to them. However, we want the rounding profile to be active ONLY when these materials are sold individually and not as a part of the BOM. Is there a way to switch off rounding for child level materials when they are a part of the BOM ?
    Appreciate your responses.
    Thanks and regards,
    Rohit Zalani
    Edited by: ROHIT ZALANI on Apr 21, 2008 11:15 PM

    We solved the same using the item cat configuration.

Maybe you are looking for