How to clean the keyboard/mousepad and surrounding areas

Hi, does anyone have any suggestions as to how to clean the white plastic interface(keypad, mousepad etc.) of the macbook, the **** thing is a magnet for dirt and oils

http://docs.info.apple.com/article.html?artnum=30889

Similar Messages

How to clean the keyboard of my MacBook?

What would be the best way to clean/sanitize the keys to my keyboard. I had a nasty case of strep throat and I want to make sure that the keys are not infected.

You will not get re-infected as your body has built up its immune system to counter it.
As for cleaning your keyboard i would do nothing other than wiping it with a lightly moistened cloth.
Also wash your hands before and after using your Macbook if you are that concerned about hygiene.

How to create the Check box and Text Area inside the Assignment block

Dear all,
        I am new to web UI development. my requirement is to create the Check box and Text box in the Assignment block. Can anyone help me to do this requirement.
Thanks & Regards,
Ashok.

Hi,
Please place the below code in the GET_P methods of the fields.
For Text Area
CASE iv_property.
    WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
      rv_value = cl_bsp_dlc_view_descriptor=>field_type_textarea.
ENDCASE.
For Check Box
CASE iv_property.
    WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
      rv_value = cl_bsp_dlc_view_descriptor=>field_type_checkbox.
ENDCASE.
Regards,
Lakshmi.Y

How to clean the paper paths and rollers in the Laserjet 4 plus?

The printer has not been used for awhile and now while printing, the paper comes out with a gray tone to in making the print hard to read.

Hello Lacie4,
The Laserjet 4 Plus is a commercial printer. I suggest posting in the forum for HP Business Support for a better chance at finding a solution.
Here is the link to the Commercial Laserjet board:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

How to clean the keyboard on yoga 2 13

it gathers dust but i don't know how to open it

er, a vacuum with a brush attachment?

How to clean the PC of QT and reinstall qt7.6?

1) QT-7.6 loads on XP-prof_sp3 OS PC with DirectX-9, but on running gives error as follows:
DLL server window: QTplayer.exe - Application error:
The exception unknown software exception (0xc0000409) occurred in the application at location 0x0040130d.
2) After repeated trials in installation the QT-7.x, it is neither running nor de-installing from start-up or control panel. It rolls back de-installation after almost completing it.
3) Also tried QT removal from system as given in the qt-support site i.e delete folders and qt files from win/system32 and recycle bin after de-installing using regcleaner>qt de-install using qt uninstall start-up menu>run regclean>shutdown>restart>reinstall qt-7.6>gives installation error now....???
4) How to clean the PC of QT.
Please help
as

Please refer to the below shown link as I feel this might be helpful to you
http://www.instructables.com/id/Clean-Your-Sticky-Laptop-Keyboard/?ALLSTEPS
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

Recently i have been getting the color wheel a lot and it is screwing with my happiness. Any thoughts on how to clean the computer up so this stops?

Recently i have been getting the color wheel a lot and it is screwing with my happiness. Any thoughts on how to clean the computer up so this stops?

Back up all data immediately as your boot drive may be failing.
If you have more than one user account, these instructions must be carried out as an administrator.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|Previous Sh' | tail | open -ef
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. The title of the window doesn't matter, and you don't need to post that.

How do you clean the keyboard

I was wondering if there was some way to clean the keyboard cos mine is full of dust. I didn't really know what category to put this in, so sorry if its in the wrong place. Thanks

Jia Wers-
Compressed air works.
If it is really dirty it can be cleaned in a dishwasher, top rack, no soap or rinse aid and no dishes. Just hot water.
Run it through a cycle, take it out and let it dry for a few days and that should do it.
And for all of you nay-sayers, please see this.
Luck-
-DaddyPaycheck

Clean the keyboard internally

Hi, I've had my Macbook for over two years, and recently I've been trying to keep it as clean as possible. I know how to clean the external parts of the keyboard, Apple has plenty of support documentation on that. The thing that bugs me is that there's plenty of dirt inside the keyboard, like in the little cracks between the keys and the plastic shell of the Macbook. Is there a way to get inside the surface of the keyboard and clean it, and if so how would I do it?
My macbook was purchased in March of 2007, I don't know what the model differences are so I'll just say that.

Hi soccerlax13,
Welcome to Apple Discussions.
There honestly isn't an easy way to get under the keys. The compressed air method works pretty well to get 90% of what's under the keys. Unfortunately sometimes by blowing stuff out from under one key will ultimately displace it under another key.
The key caps are connected via a plastic scissor assembly and try to pry them off manually is ill-advised (if you were considering that). I'd vote the compressed air method with direct application at the key cap you're looking to clear out. Just don't "squeeze" too hard and blast the air sharply at the cap for risk of popping it off the scissor mounts.

How to clean the surface of my mac book pro?

Howdy. I have a retina mac book pro (I think model doesn't matter). My question is how to clean the surface when it gets dirty. Like to use what kind of cloth and maybe some special cleaners and etc. Someone if you are experienced could you please answer me?
Thanks in advance!

http://www.monstercable.com/productdisplay.asp?pin=2105
Special MicroFiberTM cloth gently polishes your display without scratching it.
Contains a special polymer to protect your display, while reducing static electricity that attracts dust.
Liquid gel will not drip into delicate electronics.
Alcohol-free, ammonia-free formula removes dust, dirt, and fingerprints without damaging your display’s protective coating.
Monster™ iClean™ Screen Cleaner

How to clean the Stuck Workflow activities in oracle application 11i

Hi All,
Can anyone please give me the steps/Metalink Doc ID about how to clean the stuck workflow activities in Oracle Apps 11i.
Thanks,
Dinesh.

969325 wrote:
Hi All,
Can anyone please give me the steps/Metalink Doc ID about how to clean the stuck workflow activities in Oracle Apps 11i.
Thanks,
Dinesh.Please see old threads for the docs you need to refer to -- https://forums.oracle.com/forums/search.jspa?threadID=&q=Workflow+AND+Stuck&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

How to clean the Trubrite screen of my laptop?

Any suggestions on how to clean the Trubrite screen of my laptop? There were a lot of ideas given in the web but none of them were convincing enough?

For my computer LCD screen I bought screen cleaning fluid and I use it with a lint-free cloth.
Its a perfect combination ;)

How to see the keyboard shortcuts in pages like " alt " function in word?

how to see the keyboard shortcuts in pages like " alt " function in word?

luisandre wrote:
In word , if you press "alt" show you all the options you have . Appear numbers or letters in each options of the toolbar. So is more easy to work with the keyboard. How do you do this in pages?
Go to system preferences/language & text/input sources and check the box for Keyboard Viewer. Then select Keyboard Viewer from the "flag" menu at the top right of the screen. It will show all the special characters you can make when you press the alt and alt + shift keys.

Help! How to hide the keyboard in app...

I was bidding on an item in the free ebay App (provided by Ebay v 1.6.1 and the keyboard would not hide and I could not place a second bid. I had made one successful bid and then on a second bid (about 2 minutes later) the keyboard would not go away and I could not submit the bid - only enter a dollar value. It was beyond frustrating watching the time tick down and not being able to place a bid.
Please someone tell me how to hide the keyboard. I tried everything I knew how - tapping the screen, shaking the iphone, exiting out and coming back in and refreshing the app. Nothing would get the keyboard to go away and allow me to touch the submit bid button.
Thanks in advance and SORRY in advance if this is in the wrong forum!

Well the ability of how the keyboard shows and hides is a function of what the developer of the app made. Sounds like a bug in their program or just bad usability.
This is a topic to discuss with eBay as they developed the app. Their code has to control how things happen. Normally leaving a field to type in will make it go away, but if they didn't provide a way to leave focus, then that is a usability issue on their part.

How to Clean the Command History in SAP Logon Screen

Hi
Can any one let me know on how to clean the Command History (Where we generally enter the T Codes) in SAP Logon Screen.
I dont want to List/see all the Previous command Hits in drop down box.
Thanks
Dan

Hi Eric and Markus,
We found the Solution and off course we did good R & D, Finally I am able to implement the fix to Clear the Command Line History.
All I did is I Disabled the Permissions for Code Folder (Right Click > Permissions > Deny) in Regedit.
Thats It, The Commands stopped storing in the History.
Thank you Erick and Markus.
Rg
Dan

How to clean the keyboard/mousepad and surrounding areas

Similar Messages

Maybe you are looking for