How to clone repository correctly (OWB 11.1.0.6)
Hello all!
I am want to find way to clone database with repository OWB. I have installed OWB (11.1.0.6) on another server, made cold copy of database (10.2.0.4). I can connect to workspace, but can not do anyting in control center. For example, when I try to unregister location I have errors ORA-06512: on OWBSYS.WB_RTI_UTLIL
ORA-06512: on OWBSYS.WB_RT_STORE_REGISTRATION et cetera. How can I fix it?
I think the simplest way move metadata (if this enough in your case) is using OWB [url http://download.oracle.com/docs/cd/E11882_01/owb.112/e17130/change_mgmt.htm#BABEAIEH]MDL export/imprt.
If you sure that you need perform database cloning - follow configuration steps from Metalink note 434272.1 "How To Update Warehouse Builder After A Database Cloning"
Regards,
Oleg
Similar Messages
-
Help! how to create a repository correctly of owb?
I have installed oracle11 in the directory c:\app\***\product\11.1.0\db_1 and installed owb in the directory c:\app\***\product\11.1.0\owb11gr1. When i tried to Create a Repository Using the Repository Assistant, the system gives out an error message:OWBSYS is not granted access to owb home/owb/bin/admin/rtrepos.properties:Please run UnifiedRepos/reset_owbcc_home.sql specifiying the path of the Oracle Home from which the Control Center Service is being run.
Then I run the script reset_owbcc_home.sql and put in "C:/app/***/product/11.1.0/owb11gr1" according to the prompt.
But it still can not work, it gives out another error,"there is no table or views"
Can anyone tell me how to create a repository correctly?
Thanks!With your database 11g install OWB is already installed under the ORACLE_HOME's owb directory. You should/could have just used it.
I'd suggest a cleanout and start again, here are the steps:
1. Close any open OWB
2. from db home,
Stop runtime service - cd owb/rtp/sql sqlplus OWBSYS/OWBSYS @stop_service
3. drop your target user, design user
4. cleanout OWBSYS, recreate:
cd owb/UnifiedRepos
sqlplus using your sysdba
@clean_owbsys
@cat_owb <tablespace_of_your_choice)
Now run reposinst.bat from your database Oracle home
Cheers
David -
How to migrate 10gR1 repository to OWB 11gR2?
We are trying to migrate OWB 10gR1 repository to OWB 11gR2?
But are being faced with version compatibility issues.
Is there any work-around for the same?This is a bit before my time, so I'm not very familiar with how the repository worked in 10gR1, but you might have a look at this... assuming you at least have the database credentials for the repository owner, it looks like you can perform user management tasks through this helper package that might get you an OWB user that can access everything, and let you move your design into 10.2 (from which you can migrate on to 11.2).
http://download.oracle.com/docs/cd/E10926_01/doc/owb.101/b12146/extending.htm#i1088387
Maintaining Repository Users
Multiple identifiable Warehouse Builder users can access the same central repository schema when they are registered by the repository owner.
Warehouse Builder includes utility procedures for the following maintenance tasks:
* Update the role protecting password
Although the repository owner does not explicitly use the protecting password for the role, it is recommended that the repository owner change the password often.
The repository owner must connect to the repository schema using SQL Plus and issue the following statement:
Call WBSecurityHelper.updateRolePwd('newpwd');
where'newpwd' is the new password used to protect the role chosen by repository owner. The changed password encryption appears in the table called OWB_ROLE_INFO table.
* Register repository users
Warehouse Builder users must be database users located in the same database instance as the repository. The database user's default role should not be ALL. Use 'After user xxx DEFAULT Role x' to set the default role property.
To register a repository user, execute the following statement in SQL Plus:
call WBSecurityHelper.registerOWBUser ('username')
* Unregister repository users
To unregister a user from a repository, execute the following statement in SQL Plus:
Call WBSecurityHelper.unregisterOWBUser('username');
* List all repository users
The repository owner must connect to the database containing the repository and issue the following statement:
Set serveroutput on;
Call WBSecurityHelper.listOWBUser( );
Set serveroutput on is required since listOWBUser() uses the DBMS_OUTPUT.put_line for the output to dump the data to the user interface. Otherwise, DBMS_OUTPUT.put_line only dumps the output into an intermediate data structure.
The preceding user maintenance tasks should be performed in the repository by the repository owner. -
How to set the correct shared pool size and db_buffer_cache using awr
Hi All,
I want to how to set the correct size for shared_pool_size and db_cache_size using shared pool advisory and buffer pool advisory of awr report. I have paste the shared and buffer pool advisory of awr report.
Shared Pool Advisory
* SP: Shared Pool Est LC: Estimated Library Cache Factr: Factor
* Note there is often a 1:Many correlation between a single logical object in the Library Cache, and the physical number of memory objects associated with it. Therefore comparing the number of Lib Cache objects (e.g. in v$librarycache), with the number of Lib Cache Memory Objects is invalid.
Shared Pool Size(M) SP Size Factr Est LC Size (M) Est LC Mem Obj Est LC Time Saved (s) Est LC Time Saved Factr Est LC Load Time (s) Est LC Load Time Factr Est LC Mem Obj Hits (K)
4,096 1.00 471 25,153 184,206 1.00 149 1.00 9,069
4,736 1.16 511 27,328 184,206 1.00 149 1.00 9,766
5,248 1.28 511 27,346 184,206 1.00 149 1.00 9,766
5,760 1.41 511 27,346 184,206 1.00 149 1.00 9,766
6,272 1.53 511 27,346 184,206 1.00 149 1.00 9,766
6,784 1.66 511 27,346 184,206 1.00 149 1.00 9,766
7,296 1.78 511 27,346 184,206 1.00 149 1.00 9,766
7,808 1.91 511 27,346 184,206 1.00 149 1.00 9,766
8,320 2.03 511 27,346 184,206 1.00 149 1.00 9,766
Buffer Pool Advisory
* Only rows with estimated physical reads >0 are displayed
* ordered by Block Size, Buffers For Estimate
P Size for Est (M) Size Factor Buffers (thousands) Est Phys Read Factor Estimated Phys Reads (thousands) Est Phys Read Time Est %DBtime for Rds
D 4,096 0.10 485 1.02 1,002 1 0.00
D 8,192 0.20 970 1.00 987 1 0.00
D 12,288 0.30 1,454 1.00 987 1 0.00
D 16,384 0.40 1,939 1.00 987 1 0.00
D 20,480 0.50 2,424 1.00 987 1 0.00
D 24,576 0.60 2,909 1.00 987 1 0.00
D 28,672 0.70 3,394 1.00 987 1 0.00
D 32,768 0.80 3,878 1.00 987 1 0.00
D 36,864 0.90 4,363 1.00 987 1 0.00
D 40,960 1.00 4,848 1.00 987 1 0.00
D 45,056 1.10 5,333 1.00 987 1 0.00
D 49,152 1.20 5,818 1.00 987 1 0.00
D 53,248 1.30 6,302 1.00 987 1 0.00
D 57,344 1.40 6,787 1.00 987 1 0.00
D 61,440 1.50 7,272 1.00 987 1 0.00
D 65,536 1.60 7,757 1.00 987 1 0.00
D 69,632 1.70 8,242 1.00 987 1 0.00
D 73,728 1.80 8,726 1.00 987 1 0.00
D 77,824 1.90 9,211 1.00 987 1 0.00
D 81,920 2.00 9,696 1.00 987 1 0.00
My shared pool size is 4gb and db_cache_size is 40Gb.
Please help me in configuring the correct size for this.
Thanks and Regards,Hi ,
Actually batch load is taking too much time.
Please find below the 1 hr awr report
Snap Id Snap Time Sessions Cursors/Session
Begin Snap: 6557 27-Nov-11 16:00:06 126 1.3
End Snap: 6558 27-Nov-11 17:00:17 130 1.6
Elapsed: 60.17 (mins)
DB Time: 34.00 (mins)
Report Summary
Cache Sizes
Begin End
Buffer Cache: 40,960M 40,960M Std Block Size: 8K
Shared Pool Size: 4,096M 4,096M Log Buffer: 25,908K
Load Profile
Per Second Per Transaction Per Exec Per Call
DB Time(s): 0.6 1.4 0.00 0.07
DB CPU(s): 0.5 1.2 0.00 0.06
Redo size: 281,296.9 698,483.4
Logical reads: 20,545.6 51,016.4
Block changes: 1,879.5 4,667.0
Physical reads: 123.7 307.2
Physical writes: 66.4 164.8
User calls: 8.2 20.4
Parses: 309.4 768.4
Hard parses: 8.5 21.2
W/A MB processed: 1.7 4.3
Logons: 0.7 1.6
Executes: 1,235.9 3,068.7
Rollbacks: 0.0 0.0
Transactions: 0.4
Instance Efficiency Percentages (Target 100%)
Buffer Nowait %: 100.00 Redo NoWait %: 100.00
Buffer Hit %: 99.66 In-memory Sort %: 100.00
Library Hit %: 99.19 Soft Parse %: 97.25
Execute to Parse %: 74.96 Latch Hit %: 99.97
Parse CPU to Parse Elapsd %: 92.41 % Non-Parse CPU: 98.65
Shared Pool Statistics
Begin End
Memory Usage %: 80.33 82.01
% SQL with executions>1: 90.90 86.48
% Memory for SQL w/exec>1: 90.10 86.89
Top 5 Timed Foreground Events
Event Waits Time(s) Avg wait (ms) % DB time Wait Class
DB CPU 1,789 87.72
db file sequential read 27,531 50 2 2.45 User I/O
db file scattered read 26,322 30 1 1.47 User I/O
row cache lock 1,798 20 11 0.96 Concurrency
OJVM: Generic 36 15 421 0.74 Other
Host CPU (CPUs: 24 Cores: 12 Sockets: )
Load Average Begin Load Average End %User %System %WIO %Idle
0.58 1.50 2.8 0.7 0.1 96.6
Instance CPU
%Total CPU %Busy CPU %DB time waiting for CPU (Resource Manager)
2.2 63.6 0.0
Memory Statistics
Begin End
Host Mem (MB): 131,072.0 131,072.0
SGA use (MB): 50,971.4 50,971.4
PGA use (MB): 545.5 1,066.3
% Host Mem used for SGA+PGA: 39.30 39.70
RAC Statistics
Begin End
Number of Instances: 2 2
Global Cache Load Profile
Per Second Per Transaction
Global Cache blocks received: 3.09 7.68
Global Cache blocks served: 1.86 4.62
GCS/GES messages received: 78.64 195.27
GCS/GES messages sent: 53.82 133.65
DBWR Fusion writes: 0.52 1.30
Estd Interconnect traffic (KB) 65.50
Global Cache Efficiency Percentages (Target local+remote 100%)
Buffer access - local cache %: 99.65
Buffer access - remote cache %: 0.02
Buffer access - disk %: 0.34
Global Cache and Enqueue Services - Workload Characteristics
Avg global enqueue get time (ms): 0.0
Avg global cache cr block receive time (ms): 1.7
Avg global cache current block receive time (ms): 1.0
Avg global cache cr block build time (ms): 0.0
Avg global cache cr block send time (ms): 0.0
Global cache log flushes for cr blocks served %: 1.4
Avg global cache cr block flush time (ms): 0.9
Avg global cache current block pin time (ms): 0.0
Avg global cache current block send time (ms): 0.0
Global cache log flushes for current blocks served %: 0.1
Avg global cache current block flush time (ms): 0.0
Global Cache and Enqueue Services - Messaging Statistics
Avg message sent queue time (ms): 0.0
Avg message sent queue time on ksxp (ms): 0.4
Avg message received queue time (ms): 0.5
Avg GCS message process time (ms): 0.0
Avg GES message process time (ms): 0.0
% of direct sent messages: 79.13
% of indirect sent messages: 17.10
% of flow controlled messages: 3.77
Cluster Interconnect
Begin End
Interface IP Address Pub Source IP Pub Src
en9 10.51.10.61 N Oracle Cluster Repository
Main Report
* Report Summary
* Wait Events Statistics
* SQL Statistics
* Instance Activity Statistics
* IO Stats
* Buffer Pool Statistics
* Advisory Statistics
* Wait Statistics
* Undo Statistics
* Latch Statistics
* Segment Statistics
* Dictionary Cache Statistics
* Library Cache Statistics
* Memory Statistics
* Streams Statistics
* Resource Limit Statistics
* Shared Server Statistics
* init.ora Parameters
More RAC Statistics
* RAC Report Summary
* Global Messaging Statistics
* Global CR Served Stats
* Global CURRENT Served Stats
* Global Cache Transfer Stats
* Interconnect Stats
* Dynamic Remastering Statistics
Back to Top
Statistic Name Time (s) % of DB Time
sql execute elapsed time 1,925.20 94.38
DB CPU 1,789.38 87.72
connection management call elapsed time 99.65 4.89
PL/SQL execution elapsed time 89.81 4.40
parse time elapsed 46.32 2.27
hard parse elapsed time 25.01 1.23
Java execution elapsed time 21.24 1.04
PL/SQL compilation elapsed time 11.92 0.58
failed parse elapsed time 9.37 0.46
hard parse (sharing criteria) elapsed time 8.71 0.43
sequence load elapsed time 0.06 0.00
repeated bind elapsed time 0.02 0.00
hard parse (bind mismatch) elapsed time 0.01 0.00
DB time 2,039.77
background elapsed time 122.00
background cpu time 113.42
Statistic Value End Value
NUM_LCPUS 0
NUM_VCPUS 0
AVG_BUSY_TIME 12,339
AVG_IDLE_TIME 348,838
AVG_IOWAIT_TIME 221
AVG_SYS_TIME 2,274
AVG_USER_TIME 9,944
BUSY_TIME 299,090
IDLE_TIME 8,375,051
IOWAIT_TIME 6,820
SYS_TIME 57,512
USER_TIME 241,578
LOAD 1 2
OS_CPU_WAIT_TIME 312,200
PHYSICAL_MEMORY_BYTES 137,438,953,472
NUM_CPUS 24
NUM_CPU_CORES 12
GLOBAL_RECEIVE_SIZE_MAX 1,310,720
GLOBAL_SEND_SIZE_MAX 1,310,720
TCP_RECEIVE_SIZE_DEFAULT 16,384
TCP_RECEIVE_SIZE_MAX 9,223,372,036,854,775,807
TCP_RECEIVE_SIZE_MIN 4,096
TCP_SEND_SIZE_DEFAULT 16,384
TCP_SEND_SIZE_MAX 9,223,372,036,854,775,807
TCP_SEND_SIZE_MIN 4,096
Back to Wait Events Statistics
Back to Top
Operating System Statistics - Detail
Snap Time Load %busy %user %sys %idle %iowait
27-Nov 16:00:06 0.58
27-Nov 17:00:17 1.50 3.45 2.79 0.66 96.55 0.08
Back to Wait Events Statistics
Back to Top
Foreground Wait Class
* s - second, ms - millisecond - 1000th of a second
* ordered by wait time desc, waits desc
* %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
* Captured Time accounts for 95.7% of Total DB time 2,039.77 (s)
* Total FG Wait Time: 163.14 (s) DB CPU time: 1,789.38 (s)
Wait Class Waits %Time -outs Total Wait Time (s) Avg wait (ms) %DB time
DB CPU 1,789 87.72
User I/O 61,229 0 92 1 4.49
Other 102,743 40 31 0 1.50
Concurrency 3,169 10 24 7 1.16
Cluster 58,920 0 11 0 0.52
System I/O 45,407 0 6 0 0.29
Configuration 107 7 1 5 0.03
Commit 383 0 0 1 0.01
Network 15,275 0 0 0 0.00
Application 52 8 0 0 0.00
Back to Wait Events Statistics
Back to Top
Foreground Wait Events
* s - second, ms - millisecond - 1000th of a second
* Only events with Total Wait Time (s) >= .001 are shown
* ordered by wait time desc, waits desc (idle events last)
* %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
Event Waits %Time -outs Total Wait Time (s) Avg wait (ms) Waits /txn % DB time
db file sequential read 27,531 0 50 2 18.93 2.45
db file scattered read 26,322 0 30 1 18.10 1.47
row cache lock 1,798 0 20 11 1.24 0.96
OJVM: Generic 36 42 15 421 0.02 0.74
db file parallel read 394 0 7 19 0.27 0.36
control file sequential read 22,248 0 6 0 15.30 0.28
reliable message 4,439 0 4 1 3.05 0.18
gc current grant busy 7,597 0 3 0 5.22 0.16
PX Deq: Slave Session Stats 2,661 0 3 1 1.83 0.16
DFS lock handle 3,208 0 3 1 2.21 0.16
direct path write temp 4,842 0 3 1 3.33 0.15
library cache load lock 39 0 3 72 0.03 0.14
gc cr multi block request 37,008 0 3 0 25.45 0.14
IPC send completion sync 5,451 0 2 0 3.75 0.10
gc cr block 2-way 4,669 0 2 0 3.21 0.09
enq: PS - contention 3,183 33 1 0 2.19 0.06
gc cr grant 2-way 5,151 0 1 0 3.54 0.06
direct path read temp 1,722 0 1 1 1.18 0.05
gc current block 2-way 1,807 0 1 0 1.24 0.03
os thread startup 6 0 1 108 0.00 0.03
name-service call wait 12 0 1 47 0.01 0.03
PX Deq: Signal ACK RSG 2,046 50 0 0 1.41 0.02
log file switch completion 3 0 0 149 0.00 0.02
rdbms ipc reply 3,610 0 0 0 2.48 0.02
gc current grant 2-way 1,432 0 0 0 0.98 0.02
library cache pin 903 32 0 0 0.62 0.02
PX Deq: reap credit 35,815 100 0 0 24.63 0.01
log file sync 383 0 0 1 0.26 0.01
Disk file operations I/O 405 0 0 0 0.28 0.01
library cache lock 418 3 0 0 0.29 0.01
kfk: async disk IO 23,159 0 0 0 15.93 0.01
gc current block busy 4 0 0 35 0.00 0.01
gc current multi block request 1,206 0 0 0 0.83 0.01
ges message buffer allocation 38,526 0 0 0 26.50 0.00
enq: FB - contention 131 0 0 0 0.09 0.00
undo segment extension 8 100 0 6 0.01 0.00
CSS initialization 8 0 0 6 0.01 0.00
SQL*Net message to client 14,600 0 0 0 10.04 0.00
enq: HW - contention 96 0 0 0 0.07 0.00
CSS operation: action 8 0 0 4 0.01 0.00
gc cr block busy 33 0 0 1 0.02 0.00
latch free 30 0 0 1 0.02 0.00
enq: TM - contention 49 6 0 0 0.03 0.00
enq: JQ - contention 19 100 0 1 0.01 0.00
SQL*Net more data to client 666 0 0 0 0.46 0.00
asynch descriptor resize 3,179 100 0 0 2.19 0.00
latch: shared pool 3 0 0 3 0.00 0.00
CSS operation: query 24 0 0 0 0.02 0.00
PX Deq: Signal ACK EXT 72 0 0 0 0.05 0.00
KJC: Wait for msg sends to complete 269 0 0 0 0.19 0.00
latch: object queue header operation 4 0 0 1 0.00 0.00
gc cr block congested 5 0 0 0 0.00 0.00
utl_file I/O 11 0 0 0 0.01 0.00
enq: TO - contention 3 33 0 0 0.00 0.00
SQL*Net message from client 14,600 0 219,478 15033 10.04
jobq slave wait 7,726 100 3,856 499 5.31
PX Deq: Execution Msg 10,556 19 50 5 7.26
PX Deq: Execute Reply 2,946 31 27 9 2.03
PX Deq: Parse Reply 3,157 35 3 1 2.17
PX Deq: Join ACK 2,976 28 2 1 2.05
PX Deq Credit: send blkd 7 14 0 4 0.00
Back to Wait Events Statistics
Back to Top
Background Wait Events
* ordered by wait time desc, waits desc (idle events last)
* Only events with Total Wait Time (s) >= .001 are shown
* %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
Event Waits %Time -outs Total Wait Time (s) Avg wait (ms) Waits /txn % bg time
os thread startup 140 0 13 90 0.10 10.35
db file parallel write 8,233 0 6 1 5.66 5.08
log file parallel write 3,906 0 6 1 2.69 4.62
log file sequential read 350 0 5 16 0.24 4.49
control file sequential read 13,737 0 5 0 9.45 3.72
DFS lock handle 2,990 27 2 1 2.06 1.43
db file sequential read 921 0 2 2 0.63 1.39
SQL*Net break/reset to client 18 0 1 81 0.01 1.19
control file parallel write 2,455 0 1 1 1.69 1.12
ges lms sync during dynamic remastering and reconfig 24 100 1 50 0.02 0.98
library cache load lock 35 0 1 24 0.02 0.68
ASM file metadata operation 3,483 0 1 0 2.40 0.65
enq: CO - master slave det 1,203 100 1 0 0.83 0.46
kjbdrmcvtq lmon drm quiesce: ping completion 9 0 1 62 0.01 0.46
enq: WF - contention 11 0 0 35 0.01 0.31
CGS wait for IPC msg 32,702 100 0 0 22.49 0.19
gc object scan 28,788 100 0 0 19.80 0.15
row cache lock 535 0 0 0 0.37 0.14
library cache pin 370 55 0 0 0.25 0.12
ksxr poll remote instances 19,119 100 0 0 13.15 0.11
name-service call wait 6 0 0 19 0.00 0.10
gc current block 2-way 304 0 0 0 0.21 0.09
gc cr block 2-way 267 0 0 0 0.18 0.08
gc cr grant 2-way 355 0 0 0 0.24 0.08
ges LMON to get to FTDONE 3 100 0 24 0.00 0.06
enq: CF - contention 145 76 0 0 0.10 0.05
PX Deq: reap credit 8,842 100 0 0 6.08 0.05
reliable message 126 0 0 0 0.09 0.05
db file scattered read 19 0 0 3 0.01 0.05
library cache lock 162 1 0 0 0.11 0.04
latch: shared pool 2 0 0 27 0.00 0.04
Disk file operations I/O 504 0 0 0 0.35 0.04
gc current grant busy 148 0 0 0 0.10 0.04
gcs log flush sync 84 0 0 1 0.06 0.04
ges message buffer allocation 24,934 0 0 0 17.15 0.02
enq: CR - block range reuse ckpt 83 0 0 0 0.06 0.02
latch free 22 0 0 1 0.02 0.02
CSS operation: action 13 0 0 2 0.01 0.02
CSS initialization 4 0 0 6 0.00 0.02
direct path read 1 0 0 21 0.00 0.02
rdbms ipc reply 153 0 0 0 0.11 0.01
db file parallel read 2 0 0 8 0.00 0.01
direct path write 5 0 0 3 0.00 0.01
gc current multi block request 49 0 0 0 0.03 0.01
gc current block busy 5 0 0 2 0.00 0.01
enq: PS - contention 24 50 0 0 0.02 0.01
gc cr multi block request 54 0 0 0 0.04 0.01
ges generic event 1 100 0 10 0.00 0.01
gc current grant 2-way 35 0 0 0 0.02 0.01
kfk: async disk IO 183 0 0 0 0.13 0.01
Log archive I/O 3 0 0 2 0.00 0.01
gc buffer busy acquire 2 0 0 3 0.00 0.00
LGWR wait for redo copy 123 0 0 0 0.08 0.00
IPC send completion sync 18 0 0 0 0.01 0.00
enq: TA - contention 11 0 0 0 0.01 0.00
read by other session 2 0 0 2 0.00 0.00
enq: TM - contention 9 89 0 0 0.01 0.00
latch: ges resource hash list 135 0 0 0 0.09 0.00
PX Deq: Slave Session Stats 12 0 0 0 0.01 0.00
KJC: Wait for msg sends to complete 89 0 0 0 0.06 0.00
enq: TD - KTF dump entries 8 0 0 0 0.01 0.00
enq: US - contention 7 0 0 0 0.00 0.00
CSS operation: query 12 0 0 0 0.01 0.00
enq: TK - Auto Task Serialization 6 100 0 0 0.00 0.00
PX Deq: Signal ACK RSG 24 50 0 0 0.02 0.00
log file single write 6 0 0 0 0.00 0.00
enq: WL - contention 2 100 0 1 0.00 0.00
ADR block file read 13 0 0 0 0.01 0.00
ADR block file write 5 0 0 0 0.00 0.00
latch: object queue header operation 1 0 0 1 0.00 0.00
gc cr block busy 1 0 0 1 0.00 0.00
rdbms ipc message 103,276 67 126,259 1223 71.03
PX Idle Wait 6,467 67 12,719 1967 4.45
wait for unread message on broadcast channel 7,240 100 7,221 997 4.98
gcs remote message 218,809 84 7,213 33 150.49
DIAG idle wait 203,228 95 7,185 35 139.77
shared server idle wait 121 100 3,630 30000 0.08
ASM background timer 3,343 0 3,611 1080 2.30
Space Manager: slave idle wait 723 100 3,610 4993 0.50
heartbeat monitor sleep 722 100 3,610 5000 0.50
ges remote message 73,089 52 3,609 49 50.27
dispatcher timer 66 88 3,608 54660 0.05
pmon timer 1,474 82 3,607 2447 1.01
PING 1,487 19 3,607 2426 1.02
Streams AQ: qmn slave idle wait 125 0 3,594 28754 0.09
Streams AQ: qmn coordinator idle wait 250 50 3,594 14377 0.17
smon timer 18 50 3,505 194740 0.01
JOX Jit Process Sleep 73 100 976 13370 0.05
class slave wait 56 0 605 10806 0.04
KSV master wait 2,215 98 1 0 1.52
SQL*Net message from client 109 0 0 2 0.07
PX Deq: Parse Reply 27 44 0 1 0.02
PX Deq: Join ACK 30 40 0 1 0.02
PX Deq: Execute Reply 20 30 0 0 0.01
Streams AQ: RAC qmn coordinator idle wait 259 100 0 0 0.18
Back to Wait Events Statistics
Back to Top
Wait Event Histogram
* Units for Total Waits column: K is 1000, M is 1000000, G is 1000000000
* % of Waits: value of .0 indicates value was <.05%; value of null is truly 0
* % of Waits: column heading of <=1s is truly <1024ms, >1s is truly >=1024ms
* Ordered by Event (idle events last)
% of Waits
Event Total Waits <1ms <2ms <4ms <8ms <16ms <32ms <=1s >1s
ADR block file read 13 100.0
ADR block file write 5 100.0
ADR file lock 6 100.0
ARCH wait for archivelog lock 3 100.0
ASM file metadata operation 3483 99.6 .1 .1 .2
CGS wait for IPC msg 32.7K 100.0
CSS initialization 12 50.0 50.0
CSS operation: action 21 28.6 9.5 61.9
CSS operation: query 36 86.1 5.6 8.3
DFS lock handle 6198 98.6 1.2 .1 .1
Disk file operations I/O 909 95.7 3.6 .7
IPC send completion sync 5469 99.9 .1 .0 .0
KJC: Wait for msg sends to complete 313 100.0
LGWR wait for redo copy 122 100.0
Log archive I/O 3 66.7 33.3
OJVM: Generic 36 55.6 44.4
PX Deq: Signal ACK EXT 72 98.6 1.4
PX Deq: Signal ACK RSG 2070 99.7 .0 .1 .0 .1
PX Deq: Slave Session Stats 2673 99.7 .2 .1 .0
PX Deq: reap credit 44.7K 100.0
SQL*Net break/reset to client 20 95.0 5.0
SQL*Net message to client 14.7K 100.0
SQL*Net more data from client 32 100.0
SQL*Net more data to client 689 100.0
asynch descriptor resize 3387 100.0
buffer busy waits 2 100.0
control file parallel write 2455 96.6 2.2 .6 .6 .1
control file sequential read 36K 99.4 .3 .1 .1 .1 .1 .0
db file parallel read 397 8.8 .8 5.5 12.6 17.4 46.3 8.6
db file parallel write 8233 85.4 10.3 2.3 1.4 .4 .1
db file scattered read 26.3K 79.2 1.5 8.2 10.5 .6 .1 .0
db file sequential read 28.4K 60.2 3.3 18.0 18.1 .3 .1 .0
db file single write 2 100.0
direct path read 2 50.0 50.0
direct path read temp 1722 95.8 2.8 .1 .5 .8 .1
direct path write 6 83.3 16.7
direct path write temp 4842 96.3 2.7 .5 .2 .0 .0 .2
enq: AF - task serialization 1 100.0
enq: CF - contention 145 99.3 .7
enq: CO - master slave det 1203 98.9 .8 .2
enq: CR - block range reuse ckpt 83 100.0
enq: DR - contention 2 100.0
enq: FB - contention 131 100.0
enq: HW - contention 97 100.0
enq: JQ - contention 19 89.5 10.5
enq: JS - job run lock - synchronize 3 100.0
enq: MD - contention 1 100.0
enq: MW - contention 2 100.0
enq: PS - contention 3207 99.5 .4 .1
enq: TA - contention 11 100.0
enq: TD - KTF dump entries 8 100.0
enq: TK - Auto Task Serialization 6 100.0
enq: TM - contention 58 100.0
enq: TO - contention 3 100.0
enq: TQ - DDL contention 1 100.0
enq: TS - contention 1 100.0
enq: UL - contention 1 100.0
enq: US - contention 7 100.0
enq: WF - contention 11 81.8 18.2
enq: WL - contention 2 50.0 50.0
gc buffer busy acquire 2 50.0 50.0
gc cr block 2-way 4934 99.9 .1 .0 .0
gc cr block busy 35 68.6 31.4
gc cr block congested 6 100.0
gc cr disk read 2 100.0
gc cr grant 2-way 4824 100.0 .0
gc cr grant congested 2 100.0
gc cr multi block request 37.1K 99.8 .2 .0 .0 .0 .0 .0
gc current block 2-way 2134 99.9 .0 .0
gc current block busy 7 14.3 14.3 14.3 28.6 28.6
gc current block congested 2 100.0
gc current grant 2-way 1337 99.9 .1
gc current grant busy 7123 99.2 .2 .2 .0 .0 .3 .1
gc current grant congested 2 100.0
gc current multi block request 1260 99.8 .2
gc object scan 28.8K 100.0
gcs log flush sync 65 95.4 3.1 1.5
ges LMON to get to FTDONE 3 100.0
ges generic event 1 100.0
ges inquiry response 2 100.0
ges lms sync during dynamic remastering and reconfig 24 16.7 29.2 54.2
ges message buffer allocation 63.1K 100.0
kfk: async disk IO 23.3K 100.0 .0 .0
kjbdrmcvtq lmon drm quiesce: ping completion 9 11.1 88.9
ksxr poll remote instances 19.1K 100.0
latch free 52 59.6 40.4
latch: call allocation 2 100.0
latch: gc element 1 100.0
latch: gcs resource hash 1 100.0
latch: ges resource hash list 135 100.0
latch: object queue header operation 5 40.0 40.0 20.0
latch: shared pool 5 40.0 20.0 20.0 20.0
library cache load lock 74 9.5 5.4 8.1 17.6 10.8 13.5 35.1
library cache lock 493 99.2 .4 .4
library cache pin 1186 98.4 .3 1.2 .1
library cache: mutex X 6 100.0
log file parallel write 3897 72.9 1.5 17.1 7.5 .6 .3 .1
log file sequential read 350 4.6 3.1 59.4 30.0 2.9
log file single write 6 100.0
log file switch completion 3 33.3 66.7
log file sync 385 90.4 3.6 4.7 .8 .5
name-service call wait 18 5.6 5.6 5.6 16.7 44.4 22.2
os thread startup 146 100.0
rdbms ipc reply 3763 99.7 .3
read by other session 2 50.0 50.0
reliable message 4565 99.7 .2 .0 .0 .1
row cache lock 2334 99.3 .2 .1 .1 .3
undo segment extension 8 50.0 37.5 12.5
utl_file I/O 11 100.0
ASM background timer 3343 57.0 .3 .1 .1 .1 21.1 21.4
DIAG idle wait 203.2K 3.4 .2 .4 18.0 41.4 14.8 21.8
JOX Jit Process Sleep 73 2.7 97.3
KSV master wait 2213 99.4 .1 .2 .3
PING 1487 81.0 19.0
PX Deq Credit: send blkd 7 57.1 14.3 14.3 14.3
PX Deq: Execute Reply 2966 59.8 .8 9.5 5.6 10.2 2.6 11.4
PX Deq: Execution Msg 10.6K 72.4 12.1 2.6 2.5 .1 5.6 4.6 .0
PX Deq: Join ACK 3006 77.9 22.1 .1
PX Deq: Parse Reply 3184 67.1 31.1 1.6 .2
PX Idle Wait 6466 .2 8.7 4.3 4.8 .3 .1 5.0 76.6
SQL*Net message from client 14.7K 72.4 2.8 .8 .5 .9 .4 2.8 19.3
Space Manager: slave idle wait 722 100.0
Streams AQ: RAC qmn coordinator idle wait 259 100.0
Streams AQ: qmn coordinator idle wait 250 50.0 50.0
Streams AQ: qmn slave idle wait 125 100.0
class slave wait 55 67.3 7.3 1.8 5.5 1.8 7.3 9.1
dispatcher timer 66 6.1 93.9
gcs remote message 218.6K 7.7 1.8 1.2 1.6 1.7 15.7 70.3
ges remote message 72.9K 29.7 5.1 2.7 2.2 1.5 4.0 54.7
heartbeat monitor sleep 722 100.0
jobq slave wait 7725 .1 .0 99.9
pmon timer 1474 18.4 81.6
rdbms ipc message 103.3K 20.7 2.7 1.5 1.3 .9 .7 40.7 31.6
shared server idle wait 121 100.0
smon timer 18 100.0
wait for unread message on broadcast channel 7238 .3 99.7
Back to Wait Events Statistics
Back to Top
Wait Event Histogram Detail (64 msec to 2 sec)
* Units for Total Waits column: K is 1000, M is 1000000, G is 1000000000
* Units for % of Total Waits: ms is milliseconds s is 1024 milliseconds (approximately 1 second)
* % of Total Waits: total waits for all wait classes, including Idle
* % of Total Waits: value of .0 indicates value was <.05%; value of null is truly 0
* Ordered by Event (only non-idle events are displayed)
% of Total Waits
Event Waits 64ms to 2s <32ms <64ms <1/8s <1/4s <1/2s <1s <2s >=2s
ASM file metadata operation 6 99.8 .1 .1
DFS lock handle 6 99.9 .1 .0
OJVM: Generic 16 55.6 2.8 41.7
PX Deq: Signal ACK RSG 3 99.9 .0 .1
PX Deq: Slave Session Stats 3 99.9 .0 .0 .0
SQL*Net break/reset to client 1 95.0 5.0
control file sequential read 1 100.0 .0
db file parallel read 34 91.4 8.6
db file scattered read 4 100.0 .0 .0
db file sequential read 6 100.0 .0 .0 .0
direct path write temp 11 99.8 .1 .1 .0
enq: WF - contention 2 81.8 18.2
gc cr block 2-way 1 100.0 .0
gc cr multi block request 1 100.0 .0
gc current block 2-way 1 100.0 .0
gc current block busy 2 71.4 28.6
gc current grant busy 8 99.9 .0 .1
ges lms sync during dynamic remastering and reconfig 13 45.8 20.8 33.3
kjbdrmcvtq lmon drm quiesce: ping completion 8 11.1 11.1 77.8
latch: shared pool 1 80.0 20.0
library cache load lock 26 64.9 14.9 12.2 4.1 4.1
log file parallel write 2 99.9 .0 .0
log file sequential read 10 97.1 2.0 .6 .3
log file switch completion 2 33.3 66.7
name-service call wait 4 77.8 22.2
os thread startup 146 100.0
reliable message 4 99.9 .0 .1
row cache lock 2 99.7 .0 .0 .3
Back to Wait Events Statistics
Back to Top
Wait Event Histogram Detail (4 sec to 2 min)
* Units for Total Waits column: K is 1000, M is 1000000, G is 1000000000
* Units for % of Total Waits: s is 1024 milliseconds (approximately 1 second) m is 64*1024 milliseconds (approximately 67 seconds or 1.1 minutes)
* % of Total Waits: total waits for all wait classes, including Idle
* % of Total Waits: value of .0 indicates value was <.05%; value of null is truly 0
* Ordered by Event (only non-idle events are displayed)
% of Total Waits
Event Waits 4s to 2m <2s <4s <8s <16s <32s < 1m < 2m >=2m
row cache lock 6 99.7 .3
Back to Wait Events Statistics
Back to Top
Wait Event Histogram Detail (4 min to 1 hr)
No data exists for this section of the report.
Back to Wait Events Statistics
Back to Top
Service Statistics
* ordered by DB Time
Service Name DB Time (s) DB CPU (s) Physical Reads (K) Logical Reads (K)
ubshost 1,934 1,744 445 73,633
SYS$USERS 105 45 1 404
SYS$BACKGROUND 0 0 1 128
ubshostXDB 0 0 0 0
Back to Wait Events Statistics
Back to Top
Service Wait Class Stats
* Wait Class info for services in the Service Statistics section.
* Total Waits and Time Waited displayed for the following wait classes: User I/O, Concurrency, Administrative, Network
* Time Waited (Wt Time) in seconds
Service Name User I/O Total Wts User I/O Wt Time Concurcy Total Wts Concurcy Wt Time Admin Total Wts Admin Wt Time Network Total Wts Network Wt Time
ubshost 60232 90 2644 4 0 0 13302 0
SYS$USERS 997 2 525 19 0 0 1973 0
SYS$BACKGROUND 1456 2 1258 14 0 0 0 0
I am not able to paste the whole awr report. I have paste some of the sections of awr report.
Please help.
Thanks and Regards, -
Dropped Design Repository from OWB
I accidentally dropped the design repository from OWB. A backup copy has been restored to the DB, but still it's missing. Please help.
What OWB release you used and how did you create backup?
If OWB release is 9.2 and backup has been created with Oracle exp utility then you can try to use script Restore_repos.txt from OWB Sample code page (this is the sequence of actions for restoring design repository). Find this script at
http://www.oracle.com/technology/sample_code/products/warehouse/index.html
Maybe this document will work and for OWB10gR1 but I don't sure.
Regards,
Oleg -
When I forward an e-mail from my iPad or iPhone, the pictures in the signature are sent as attachments. How can this be corrected?
See [[Blank messages in Hotmail]]
-
how do you "image correction" in PREVIEW in a macbook pro? I have an iBook G4 that gives it as an option in the tools drop down window.
From preview:
Tools-> Adjust Color-> Auto Levels
Or you can import the image into iPhoto:
Edit-> Enhance -
Error while creating the repository in OWB 10.2
Hi,
I'm trying to create the design the repository for OWB and i'm getting the following error.
main.main[5]20090916@13:49:28.028: 00> oracle.wh.service.impl.assistant.ProcessEngine.display(ProcessEngine.java:1409): Log File Directory = S:\OWB10G24.001\OraHome_1\owb\UnifiedRepos\log_090916_134928.000.log
main.main[5]20090916@13:49:28.028: 00> oracle.wh.service.impl.assistant.ProcessEngine.display(ProcessEngine.java:1409): OWBCC_HOME(OracleHome) = S:\OWB10G24.001\OraHome_1
main.main[5]20090916@13:49:29.029: 00> oracle.wh.ui.jcommon.WhPushButton@1687e7c: WhPushButton constructor : rtsString = Reset OWBRT_SYS's Password (Optional)
main.main[5]20090916@13:49:30.030: 00> oracle.wh.ui.install.assistant.wizards.NewMLSPanel.initLangs(NewMLSPanel.java:339): ... I'm in initLangs()...
main.main[5]20090916@13:49:31.031: 00> oracle.wh.ui.jcommon.WhPushButton@1687e7c: WhPushButton constructor : rtsString = Reset OWBRT_SYS's Password (Optional)
main.main[5]20090916@13:49:31.031: 00> oracle.wh.ui.install.assistant.wizards.AssistantWizardDefinition.display(AssistantWizardDefinition.java:823): [setLocaleByPreference]: Can not read install.properties. Using default.
main.main[5]20090916@13:49:32.032: 00> oracle.wh.ui.install.assistant.wizards.AssistantWizardDefinition.display(AssistantWizardDefinition.java:823): [setLocaleByPreference]: Can not read install.properties. Using default.
main.main[5]20090916@13:49:32.032: 00> oracle.wh.ui.common.UIUtils@1522de2: Setting cursor called on oracle.wh.ui.owbcommon.OWBWizard$7[frame0,0,0,0x0,invalid,hidden,layout=java.awt.BorderLayout,title=,resizable,normal,defaultCloseOperation=DO_NOTHING_ON_CLOSE,rootPane=javax.swing.JRootPane[,0,0,0x0,invalid,layout=javax.swing.JRootPane$RootLayout,alignmentX=null,alignmentY=null,border=,flags=385,maximumSize=,minimumSize=,preferredSize=],rootPaneCheckingEnabled=true]
main.main[5]20090916@13:49:32.032: 00> oracle.wh.ui.common.UIUtils@1522de2: Setting cursor called on oracle.wh.ui.owbcommon.OWBWizardWelcomePanel[,0,0,0x0,invalid,layout=java.awt.BorderLayout,alignmentX=null,alignmentY=null,border=,flags=9,maximumSize=,minimumSize=,preferredSize=]Its resolved now it was because of an access issue.
-
When opening Windows 7 I'm receiving the following message The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.......I have never rec'd this before............I have a iPhone and iPad...............How can this be corrected without interferring with the information on my computer? Thanks
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck -
How to find a correct User-Exit
Hi All
I need to make changes in the user exit and there are many user-exits in the standard program here my question is how to find the correct user-exit which suits our requirement.
Thanks
srinirun this program by giving ur t code...and click the exit it will go to SMOD there u read the documentation of that exit..if ur requirement satisfies try to use that one..
REPORT ZUSEREXIT.
*report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : devclass like tadir-devclass.
parameters : tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname = tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen. -
No question, I just wanna say thanks to the person who discovered how to change the correct dns to use FaceTime. The 8.8.8.8. Really work. Genius. Thanks again.
solved
-
I turned on iTunes Match, and subscribed; but it did not load all of my library. How can this be corrected?
iTunes Store: Subscribing to iTunes Match
After looking through the above link, and still doesn't help then try this below:
> iTunes Content: Downloading past purchases from App Store, iBookstore, and iTunes Store
> Non-iTunes Content: Transfer them from a different iDevice or from USB flash drive and/or external hard drive.
I don't use iTunes Match so I don't really know.
Message was edited by: keeferaf -
How to clone Boot Camp partition when Winclone does not work
The hard drive in my MacBook Pro is failing. It has 2 partions, one for Apple and the other is a Bootcamp with Windows 7.
I tried repairing it with Disk Utility, which did not work. I also ran DiskWarrior, which resulted in the error message: "Directory cannot be rebuilt due to disk hardware failure". I was able to copy my Apple files through DiskWarrior although there were a couple of errors.
My question is how to clone my Bootcamp Partition. I tried making an image with Disk Utility but it failed. I also tried using Winclone and it failed indicating there were hard drive issues.
Is there another way to try to copy the Bootcamp partition? I can boot to Apple so running a program/app or trying UNIX commands might work.
Thank you in advance.Some previous forum comments I have collected regarding backup of BootCamp.
Acronis 2011 w/ plus pak, didn't work well previously
Ghost 15 - probably not
Casper 6 works for Windows on Boot Camp only
CopyCatX is more lengthy and sector copy so takes the longest.
Paragon Hard Drive Suite 2011 because it works great and they have CampTune
Windows 7 system backup and restore - Apple's goofy HFS read-only interferes with system and file backup.
I have also used Casper, Clonezilla and Paragon but less regularly, Casper failed a few times, I stopped using it, Clonezilla worked but took forever (for me) Paragon (which I have only used twice) was the best but my sample is limited.
I have restored from DU, CCC, SuperDuper and TM, they all worked, TM was slower but not a lot, you can boot from the others, which I prefer.
Paragon HDM 2011 can do either offline or online backups, the difference is that with an offline backup, the entire partition (or disk) is unallocated. In an online backup, the backup utility is running against a partition that may be making changes to itself. When you run CCC or SD! in OS X, you're running an online backup. However, I would recommend (at least for the first backup) that you boot from the HDM recovery CD to do an offline backup. This will ensure that you have an *exact* copy of the parition/disk.
I tried the native Windows backup utility. It worked to backup and restore my Windows partition, but I noticed a "bad" side effect. When I would restore a Windows Backup to my HD, it would corrupt my MacOS boot partition, so I would then have to restore the Mac partition as well.
Winclone allows you to migrate your Bootcamp partition from one Mac to another Mac and make sure Windows will boot. However, if the processor (for example, Core Duo or i7) is a different type, the restored version of Windows may not be supported or be able to run on the new Mac. If you are migrating between Macs that are the same type (MacBook Air to MacBook Air, for example), you will have the greatest chance of success. You can try to restore Winclone images between different types of Macs (for example, a Mac Pro to a Mac Mini), but be aware that if Windows boots but does not reach the desktop, it is probably not an issue with Winclone, but rather the change in processor type. -
Insufficient rights - How to determine the correct rights?
All,
Does anyone know how to determine the correct rights if you get the error message "Insufficient rights for operation"?
In SAP backend systems you can start transaction SU53 to check your "missing" authorizations, but is something like that also possible in MDM?
I also don't see any detailed information in the logs or reports.
If anyone has an good suggestion, please let me know, since I don't want to do "trail and error" to know what Functions to set to Execute and what Tables/Fields to set to Read/Write (because there are quite some combinations to check).
p.s. I've read the complete reference guide of the MDM console and sometimes it's really obvious what Functions and Tables/Fields you have to set, but for instance when I want to give authorization to maintain Relationships in the DataManager and have set the Main table and all Relationships to Read/Write and have set all Records and DataManager functions to Execute it still doesn't allow me to maintain the relationships on the records! I only get the message "insufficient rights" and it's unclear what rights are missing!
Regards,
Marcelhi Marcel,
I doubt if we have anything in MDM to show you what authorizations are missing.However,you can check the following :
1. What activity are you trying to perform when you get this error.
2. Check if authorization are given in the role for that actitvity.
3. Check how many roles are allocated to user and Is authorization given in all roles if more than 1 role is assigned to that user?
Please let us know answer of the queries...
Regards,
Vineet -
JSObject returns wrong date. How can I extract correct date from digital signature?
I'm trying to extract name and date from digital signatures by using JSObject in Excel VBA, but JSObject returns wrong date. Year, month, hour and minute are correct, but only day is incorrect.
Here is my code. I'm using Acrobat 8.1.3.
Please tell me what's wrong with this code and how I can extract correct date from digital signatures.
Public Sub sbTest()
Dim oApp As Acrobat.acroApp
Dim oPDDoc As Acrobat.AcroPDDoc
Dim jso As Object
Dim f As Object
Dim sig As Object
Dim strFileName As String
Set oApp = CreateObject("AcroExch.App")
Set oPDDoc = CreateObject("AcroExch.PDDoc")
strFileName = "C:\Test.pdf"
If (oPDDoc.Open(strFileName)) Then
Set jso = oPDDoc.GetJSObject
Set f = jso.getField("Signature1.0")
Set sig = f.signatureInfo()
Debug.Print sig.Name
Debug.Print sig.Date
End If
Call oPDDoc.Close
Call oApp.Exit
End SubHi
You can use TDMS file format to save the data. I have attached a reference Vi.
On button click you can log the data or remove the case structure and continuous log the complete acquisition data.
Thanks and Regards
Himanshu Goyal
Thanks and Regards
Himanshu Goyal | LabVIEW Engineer- Power System Automation
Values that steer us ahead: Passion | Innovation | Ambition | Diligence | Teamwork
It Only gets BETTER!!!
Attachments:
Data Save in File.vi 35 KB
Maybe you are looking for
-
15 Seconds in BW - 140 Seconds Additional in BO... Lots of Key Figures...
Hello, I'm trying to understand the BO performance on complex BEx queries... I have a BEx query that runs in about 20 seconds on the WEB with 25 restricted/calculated key figures... WebI report based on a universe created on the BEx query above takes
-
Final Cut Pro: Sequence Setting Question
I would like to know what the best sequence setting is for my FCP project. In my project I mostly use digital still images, shot with a digital camera. I import images into FCP and directly drag them onto a sequence. JPEG file dimensions 3488x2616 Fo
-
Allowing a user to save changes
I am creating an app that is something similar to this one:- http://demo.quietlyscheming.com/DragTile/DragDrop.html However what I want is when a user drags an item from one tilelist into the other tilelist for them to be able to save these changes s
-
IPhone 4 charge status is contradictory
Something's not right with the charging status on my iPhone 4. This morning, when I took the phone out of its charging dock, I saw that it was carrying an incomplete charge. This isn't unusual; sometimes if I'm not paying attention I don't dock it co
-
Can we call two task flow from another task flow
Hi everyone, i have a issue. I have a tab(p1),under that tab i have created two tab(p1 and p2).i have to create task flow for p1 and p2 .In both ,p1 and p2, i am doing some operations. then i have to call both the task flow under another task flow(p1