How to close Middleware server of CRM

Dear All,
When I create a order in CRM, If I modify it immediately: system will give me a message: CRM_ORDER019
"Document is being distributed - changes are not possible"
But our CRM system is singleton, and not connecte with R/3.
So how can I close order distribution?

Hi,
Use Transaction:MW_MODE
And set the radio button to :off
Save settings.
Best Regards,
Pratik Patel
<b>Reward with Points!</b>

Similar Messages

How to close reports server?

Is it possible to close the reports-server-background-engine window after closing the forms which called the report?

Add the following value to your parameter list used when opening the report...
ADD_PARAMETER(pl_id, 'ORACLE_SHUTDOWN', TEXT_PARAMETER, 'YES');
null

How to close report Server?

Is it possible to shut down report-server after closing the Form which started report-server?

Unfortunately, the report designer figures that there has been a change to the report, so it wants to save it. There is nothing you can do in the add-in, or else where to change that. Other than killing the crw32.exe process in the add-in after the add-in saves the report (yuck).
Ludek

How to place a file on application server in crm?

Hi,
How to place a file from presentation server to application server in crm?, is ther any tcode or fm to do this one?
Thnaks,

Hi,
You can check this link for the issue:. Load it in the CRM server and compile the program.
[http://wiki.sdn.sap.com/wiki/display/Snippets/ApplicationserverProgram.]
cheers
Aveek

How the CRM data is transferred (initial load) to TREX server in CRM EHP1

Hi Guru's
I am working on HV segmentation first time and would like to know, how the CRM data is transferred (initial load) to TREX server in CRM EHP1, if we create the 'Data source for HV - Attribute set / Inforset' will that transfer the data to TREX server or do we need to perform Initial load by execute by batch program / Transaction.
For the update (delta load) is the program : CRM_MKTTG_TREX_UPDATE to update the BP data, can we also add other objects (Transactional data) for delta load.
Regards,
Ajay Kumar

Hi Ajay,
Yes you are right the Report CRM_MKTTG_TREX_UPDATE is used for Full load (inital load) for HV segmentation data.
Both Full and Delta load is suggested to be performed in background. You can use the options "Business partners" and "Marketing permissions". For BP's you can use Delta upload with further options:
Synchonize Business Partners Beforehand
Force Update
Offset for Delta Table Entries (in sec.)
You can also "Define Delta Source Objects for High Volume Segmentation" in SPRO > MKT > HV segmentation.
Here you can set relevant data source objects that is available for delta upload.
For more details refer to documentation next to the customization entry.
Hope this information helps you.
Regards,
Anup

How to close Mobile Mouse Server?

I was doing an update on the App Mobile Mouse Server and when it weas ready to install it indicated I needed to close the App before it could install the update. The app is not in the dock and I don't know how to close it. Help Please!!!

Hi,
In the field for local server you just type in the local dns name for your calendar server, mail server etc... Also select which port you want publish externally and the the correct port your service is actually using on your lan (Selected under advanced tab). Make sure your mobile access server can resolv your hostnames correctly. It should point to an local ip. If an nslookup shows your public ip, you have to correct your local dns server (This is often called split dns configuration.)
To access this from outside your LAN you have setup NAT and permit the port you have configure your mobile access server to be the incomming port. How exactly you do that on the airport I am not sure, but I am sure it is explained in the user manual for the airport.
I found this video about the mobile access server on youtube: http://www.youtube.com/watch?v=_VRgl2bncZU
Hope this helps.
Bernt

How to close OPEN RELAY on Exchange 2010 EDGE server

How to close open relay on it?
Server passed OPEN relay test and we would like to avoid spammers attackin us.with best regards
bostjanc

Get-ReceiveConnector | Get-ADPermission | where {($_.ExtendedRights -like "*SMTP-Accept-Any-Recipient*")} | where {$_.User -like '*anonymous*'} | ft identity,user,extendedrights
Identity User
ExtendedRights
EXCHANGE-EDGE\Default internal receive co... NT AUTHORITY\ANONYMOUS LOGON {ms-Exch-SMTP-Accept-Any-Recipient}
Recreated RECIEVE CONNECTOR on EDGE solved it.
bostjanc

How to connect SQL server

Hi
I want to know how to connect SQL server using DNSless connection ?
/* 2003/02/06 eric.leung
* Source : HOME
import java.sql.*;
import java.lang.*;
public class ejdbcsel {
     public static void main(String args[]) {
          // eric_jsp is ODBC User DNS
          // String url = "jdbc:odbc:eric_jsp";
          // Using DSNless connection
          String url = "";
          url = "jdbc:odbc:DRIVER={Microsoft Access Driver (*.mdb)}" +
          ";SERVER=127.0.0.1;DBQ=c:\\example\\ERIC_JSP.mdb";
          Connection con;
          String query;
          query = "select * from pt_mstr";
          Statement stmt;
     try {
          Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
     } catch (ClassNotFoundException e) {
          System.err.print("ClassNotFoundException " );
          System.err.println(e.getMessage());
     try {
          con = DriverManager.getConnection (url,"","");
          stmt = con.createStatement();
          ResultSet rec = stmt.executeQuery(query);
          // Scan the Database
          while(rec.next()) {
               System.out.println(rec.getString("pt_part") + "\t"
               + rec.getString("pt_desc"));
          stmt.close();
          con.close();
     } catch (SQLException ex) {
          System.err.println("SQLException: " + ex.getMessage());
     catch (Exception e) {
          System.err.println("Error: " + e.toString() + " " + e.getMessage());

Use a driver...
http://java.sun.com/products/jdbc/driverdesc.html
http://industry.java.sun.com/products/jdbc/drivers

How can we post data from CRM to SAP using ABAP proxies???

Hi ,
Can anyone hep me to create interface for the following scenario How can we post data from CRM to SAP using ABAP proxies???, can I find any document ???????
Thanks in advance
Andy

Andy,
Please look at these weblogs.
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
/people/ravikumar.allampallam/blog/2005/03/03/creating-purchase-order-idoc-through-xi
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
These should give a good idea about implementing Proxies.
Regards,
Ravi

Another Newbie, how can Mac OSX Server help my School?

Hi all, the school where i work has just taken delivery of 11 brand new macs. 8 iMacs, 2 MBP's and a mini. What i'm interested to know and if anybody is just prepared to bullet point, is how we can really benefit from this software.
Clearly it's going to be tricky administering 11 macs individually, so maybe sacrifice the mini to become the server. Heres some basic questions and if anybody has any other comments they can add from experience i can approach the school with my findings?
1) Can multiple third party software installations be initiated. i.e. we have Adobe CS3 can a multiple install be initiated over the network or would all machines have to be updated individually.
2) A big concern is storage, if a server is used can files be stored locally on the machines or would they have to be stored on the server, Xserve isn't on the cards unfortunately. Is it like a windows server where the profile is stored on the server and then just downloaded to the appropriate machine. For the meantime we ideally need to store locally or on firewire drives to keep storage issues to a minimum. It's no problem making students stick to the same mac if we can make this happen.
3) Could backups be initiated from all machines to some sort of storage facility.
4) I'm guessing it's easy to lock machines down, it seems very easy to do on standard OSX so i'm guessing it would be even easier on server.
Being a school i would be grateful for any advice or recommendations on how administering this small network would be easiest done. I'm an experienced mac user but no in a network scenario, i am however keen to learn.
Thanks in Advance

Hi, I'll give a go at answering your questions.
First, how tricky it will be to administer 11 macs individually truly depends on your users. I've setup offices where the employees were intelligent people who weren't interested in hacking around on their machines, they just did their work. All their user accounts had admin privileges (along with an admin account on each machine that only the appropriate people knew the password for) so they could easily change preferences and do updates, etc. I barely had a problem with them. If you have a group who are all into surfing naughty bits and bittorrenting and other things, then you'll need to lock them down. If you are going to lock them down, you can still do it without the aid of a server by having an admin account on each machine, but you will have to touch each machine periodically to install updates and such. If you do go with server, then you can manage a lot more centrally. By the nature of you having 11 machines and the limit of OS X client of only 10 file sharing connections at a time, you're almost forced into OS X Server and the Unlimited version at that.
1) Yes you can initiate software installations simultaneously, but it will require you to capture and package those installations, and use something along the lines of FileWave, radmind, Apple Remote Desktop, etc. to perform the push. For the number of users you're dealing with, it's probably much easier to host the installer on the network, and screen control each system and run the install (along with entering the serial numbers for each one). Any future updates could be easily performed with a terminal script and access to the updater files.
2) You can store your files anywhere you want, locally or on the server (or even on a NAS). Obviously it makes sense to host them on the server (or other central location) if they are collaborative files (ie., everyone works on them or needs to see them). Your question about the windows profiles doesn't make sense with the storage part, but you can choose how to run your server/client model. You can have roaming profiles where the users' home directories are stored on the server and they can login from any machine. Or you can have individual machines and the server only authenticates the user for access to mail/file/whatever services.
3) Yes. Either by using Time Machine if it gets fixed in 10.5.2, Retrospect (which I don't trust and haven't for years), rsync (which is free and built into the OS and is cross platform so you could even back up Windows clients), or some other commercial client like PresSTORE.
4) Yes, as I stated above you can lock down the client machines and of course server can be locked down to avoid people from messing it up.
I know you mentioned an Xserve isn't an option, but how about a MacPro tower? In your situation, I would setup a MacPro with a single 2.8Ghz Quad core chip, Unlimited MacOS X Server, 2GB RAM, and 2 x 500 GB SATA drives for $3648 (cheaper if you get the drives from elsewhere). If there's the chance you could migrate other school services to the new server (email, websites, shared calendar, jabber server, etc.) you could upgrade the processor and memory (RAM can also be had cheaper from a 3rd party). You setup the two drives in a mirror RAID for fault protection and it would contain your OS and your file shares. Then get 2 external firewire drives, at least 500 GB each. Configure your network backups (and the server itself) to backup to an external drive, leave it attached for a week, and at the end of the week, eject the drive, disconnect it, and plug in the other drive (both should be named the same). Then take the first drive off-site (to another building on campus, etc.). Repeat every week. This gives you a rotating off-site backup. If even that is not an option, the mini could be the server, but you definitely want to max the RAM, and buy one of those nice mirrored RAID enclosures from OWC as your main drive, along with the 2 externals for rotating backup.
I hope that's answered some of your questions, feel free to ask more if need be. May I ask where you are located? If by some amazing chance we're close by, I might be more of a help. Take care and good luck.
Jeff

How to find the Version of CRM system

Hi All,
I have to install CRM system and I dont have any other information other than the EWA Report, Can any one let me know how to find the Version of CRM system and we dont have Java installed in it (Generally we check WEBCUIF but as we dont have Java I cannot see the Package). Can I go with the CRMUIF ?? .
I have Pasted the information of Support Package Maintenance, that is available in EWA Report.
BBPCRM
600
4
13
SAP BBPCRM Server
CRMUIF
600
4
17
SAPK-60004INCRMUIF
SAP CRM User Interface Framework
PI_BASIS
2005_1_700
16
26
SAP R/3 Basis Plug-In
SAP_ABA
700
16
29
SAP Application Basis
SAP_AP
700
13
29
SAP_BASIS
700
16
29
SAP Basis Component
SAP_BW
700
18
31
SAP Business Information Warehouse
ST-A/PI
01P_700
0
SAPKITAB7I
SAP Service Tools for Applications Plug-In
ST-PI
2008_1_700
6
8
SAP Solution Tools Plug-In
Please let me Know. Thanks in Advance.
Vijay

Hi,
Logically your Status bar should show that.
Login to gui. --> system -> Status
and then you should see the crm version in your Component version.
SAP CRM ABAP 6.0
You should go with
BBPCRM
600
Thanks
Rishi abrol

How to launch IC Webclient in CRM 2007?

Hi,
Not able to launch IC Web Client using Tcode CRM_IC in CRM 2007? Any change to the IC Webclient launching transaction in CRM 2007 (6.0) ?
Appreciate your quick response.
Regards,
Venu.

Hello All,
Please note that I changed the subject line to "How to launch IC Webclient in CRM 2007?" from the original title of "How to launch IC Webclient in CRM 7.0 ?" since CRM 7.0 is not yet developed/released by SAP. CRM 2007 is the latest product on the market, so I assume this questions is about CRM 2007.
In CRM 2007, the transaction code "CRM_IC" is no longer available. The reason for this is that the IC WebClient technology is now also used by the rest of CRM! So there have been some slight changes affecting the Interaction Center. For example, the old IC Profile concept is replaced by a new CRM Business Role concept. Now when you start the CRM WebClient, you need to indicate which business role you want to log on with -- IC Manager, IC Agent, Sales Professional, Service Professional, Marketing Professional, etc.
One way to start the CRM WebClient is by adding a favorite to your SAP menu in SAP GUI by choosing BSP Application "CRM_UI_FRAME", any description you want, and then start page "default.htm". To assign yourself to a busines role (like IC_AGENT) you can either use the standard HR Org Model (PPOMA, PPOMB, etc.) like in the past. Or you can cheat and assign parameter "CRM_UI_PROFILE" with value e.g., "IC_AGENT" to your user in transaction SU01. Of course, you could also just create a browser shortcut that points to a specific CRM application server (e.g., http://[server]:[host]/sap/bc/bsp/sap/crm_ui_frame/default.htm
Warm regards,
John

How to create / Insert Leads in CRM On Demand using WSDL in Bpel

Could any one suggest how to create/insert leads in CRM On Demand through Bpel.
Getting following Error
<remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>Server</code>
</part><part name="summary"><summary>Cannot perform NewRecord on the business component 'Lead'(SBL-EAI-04421)</summary>
</part><part name="detail"><detail><detail>
<siebelf:siebdetail xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
<siebelf:logfilename xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">siebel.log</siebelf:logfilename>
<siebelf:errorstack xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
<siebelf:error xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
<siebelf:errorcode xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">(SBL-EAI-04421)</siebelf:errorcode>
<siebelf:errorsymbol xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"/>
<siebelf:errormsg xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">Cannot perform NewRecord on the business component 'Lead'(SBL-EAI-04421)</siebelf:errormsg>
</siebelf:error>
</siebelf:errorstack>
</siebelf:siebdetail>
</detail>
</detail>
</part></remoteFault>

Could any one suggest how to create/insert leads in CRM On Demand through Bpel.
Getting following Error
<remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>Server</code>
</part><part name="summary"><summary>Cannot perform NewRecord on the business component 'Lead'(SBL-EAI-04421)</summary>
</part><part name="detail"><detail><detail>
<siebelf:siebdetail xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
<siebelf:logfilename xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">siebel.log</siebelf:logfilename>
<siebelf:errorstack xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
<siebelf:error xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
<siebelf:errorcode xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">(SBL-EAI-04421)</siebelf:errorcode>
<siebelf:errorsymbol xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"/>
<siebelf:errormsg xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">Cannot perform NewRecord on the business component 'Lead'(SBL-EAI-04421)</siebelf:errormsg>
</siebelf:error>
</siebelf:errorstack>
</siebelf:siebdetail>
</detail>
</detail>
</part></remoteFault>

How an sale order Created in CRM online will be reflected in MSA

Hi,
Could any one explain how the sale order created in CRM online reflected in MSA.
Give me an idea how data from CRM application is tranfered to MSA.?what is the role of MDW and MAR(mobile application repository) in mobile sales?.
Edited by: Shiva kumar avvula on Jul 23, 2008 11:36 AM

hi,
You can create sales transactions, that is, quotations or sales orders, on both the mobile client and in CRM Enterprise. You can access your documents at any time and place. You can make changes to them as required, for example in the office, or on a laptop during a customer visit. Sales transactions are exchanged between systems using CRM Middleware so that you are always informed about current quotations and inquiries.
First CRM data will store in CDB( consolidate data base), from here transactional data will transfer to MObiles through communication station.
Database that contains data relevant to replication (CDB tables) for mobile scenarios. The CDB is a logical part of the entire CRM database, which also contains application data.
What evet the data coming from CRM online that will convert into SBDOC and thorugh communication station it will reach mobiles.
for more details check the link.
http://help.sap.com/saphelp_crm60/helpdata/en/29/53583c2e39e433e10000000a114084/frameset.htm
Regards
Srinu

How to close serverSocket/socket?

Hello!
I would like to stop my server and close socket and serversocket
Here is simple code
import java.net.*;
import java.io.*;
public class SimpleServer {
public static void main(String[] args) throws IOException {
ServerSocket serverSocket = null;
try {
System.out.println("create server socket");
serverSocket = new ServerSocket(2020);
} catch (IOException e) {
System.err.println("Could not listen on port: 2020");
System.exit(1);
Socket clientSocket = null;
try {
clientSocket = serverSocket.accept();
System.out.println("listening.....");
} catch (IOException e) {
System.err.println("Accept failed.");
System.exit(1);
clientSocket.close();
serverSocket.close();
It does not work - just waiting for client requests all time.
How to fix it?
Thanks

Control-C will do it....
But the problem is that the accept method will block waiting for a connection. When you are writing servers, typically you would have several threads. One would hold the server socket and block on accept. When a connection comes in, you would get the client socket and start a new thread to handle that client. Then you still have the main event thread where you would do something to wait for a command (button click, commandline input, etc) to close the server socket.

How to close Middleware server of CRM

Similar Messages

Maybe you are looking for