How to collect provider's system channel

My driver uses ETW to log some error messages to System channel.
When collecting the traces from my provider with logman I see messages from all channels including System channel.
When enable tracing with Message Analyzer I see only not-imported channels defined in my driver's manifest.
How to enable system channel collecting with Message Analyzer?

I tried different configurations and found the issue is not with System channel. The issue is with collecting events on any channel with empty template declared or without template declared (no parameters provided).
For example:
<event symbol="EvtDeviceAdd_Start" value="1021" version="0" channel="System" level="win:Informational" opcode="win:Start" template="Tmpl_Empty" message="$(string.event.1021.message)"/>
<template tid="Tmpl_Empty"/>
<string id="event.1021.message" value="DeviceAdd Start"/>

Similar Messages

I would like to know which app/software in MAC gives us the same feature that is provided by System Restore in Windows, and how does that work

I would like to know which app/software in MAC gives us the same feature that is provided by System Restore in Windows, and how does that work.

Time Machine is one such program, although it is a recursive backup program which offers limited archive capability, based on the capacity of the backup destination, and it requires you set it up before you start editing your files. Some programs are also Versions aware, which offers a kind of restore capability by file. Again needs to be setup before you start editing.
Just a for-your-info:
Mac is not an acronym, it is a nickname for Macintosh.

How can i control NI-6115 to collect data from 2 channels and save as 2 files?

I want to program NI-6115 card to collect data from 2 channels and save the two data into two different filenames that i specified?
How do i write in labview codes?

Calibur,
LabVIEW includes a number of examples that demonstrate how to acquire analog input data and write it to disk. Dependent upon the type of file you would like to use, I would suggest that you examine one of the following examples:
Cont Acq to File (binary).vi
Cont Acq to File (scaled).vi
Cont Acq to Spreadsheet File.vi
With regards to writing each channel's data to a separate file, you will need to use the Index Array function to generate two 1-D arrays, each containing data for one channel. These arrays can then be written to separate files using two Write File functions.
Good luck with your application.
Spencer S.

How to assign the source system to the virtual provider

Hi
How to assign the source system to the custom virtual provider with services in BW 3.5 ?
Regards
PWnuk

Hi PWnuk,
Refer this link on how to implement a virtual provider with services.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4752ec2d-0a01-0010-ecb0-a145cf2e3e92
Hope this helps
Regards
Karthik

How to collect system logs in Windows OS platform.

Hi,
I'm using Microsoft Windows 2003 Server installed on Sun Fire X4250. Now I want to collect all the system logs files (Like explorer file on Solaris). What should I do ?
Thanks in advance.
BR,

Vutha wrote:
Hi,
I'm using Microsoft Windows 2003 Server installed on Sun Fire X4250.
Now I want to collect all the system logs files (Like explorer file on Solaris). What should I do ?
Thanks in advance.
BR,... perhaps go ask Microsoft whether such logs exist in their operating system.
If such logs exist, then Microsoft will know where they are located and whether there is a software tool comparable to Explorer.

Job that must be programmed to collect information for system log (sm21)

Please, Who is the job that must be programmed to collect information for system log (sm21) ?
Thank you very much.
Hugo.

Before you reinitialize your log shipping configuration, check to see if you can take a differential backup and restore that on top of your standby database. This is relatively easier than to take a full database backup just to reinitialize
Edwin Sarmiento SQL Server MVP | Microsoft Certified Master
Blog |
Twitter | LinkedIn
SQL Server High Availability and Disaster Recover Deep Dive Course
I can take a diff backup.. But in my secondary, when i right click standby >tasks-->restore-->i can see only option to restore transaction log file. Other options are greyed out. How can i restore a diff backup now. If i bring the DB online with
restore with recovery, i have to restore a full backup before i can apply a diff backup.
Somebody provide me insight on below error
This secondary database is not functional because
the required copy or restore job cannot be found. You must remove this secondary database by clicking Remove. To resume log shipping to this secondary database, add it as a secondary again using the same settings.If
you resume log shipping and you specify the same restore path that you used before, any backup files that are uncopied or unrestored to this database will be copied and restored when it is added as a secondary again. Reinitializing the secondary database
is unnecessary."
I can see the LS_restore job and the job is running as per the schedule, we dont run copy job because
the backup directly falls in secondary server. wats the reason for the above error.

How to collect to different files into one message

Hi,
I have the following scenario:
Two (5Mb) Files with different file structures each ->
XI (transform and generate a single structure record) ->
Insert a record in a DB for each new record generated
Let suppose file1 has order headers - one order per line -and file2 has the corresponding order items - one item per line, e.g;
File 1
OrderNr Description
1        A
2        B
3        C
File 2
OrderNr   ItemNr   MaterialCode ....
1         1        111
1         2        222
1         3        555
2         1        888
2         2        777
3         1        111
Imagine I want to insert a record in the database for
each order/item like this
OrderNr ItemNr Description MaterialCode .....
1        1      A           111
1        2      A           222
1        3      A           555
My real scenario is a little more complicated but never mind for now.
I need to collect the two different files with two different file structures into the same message. Although I have read about the subject I am not sure about how to do it using BPM because there isn't any field I could use to correlate file1 with file2 - I can only correlate a record of file1 with several records of file2. I simply know that the two files will be available in a specific directory once a day at 06:00AM.
First question is:
How can I collect the two messages originating each from a different file into only one message with two different subtypes one for each file structure?
Because my background is ABAP I could do it with a workaround for temporarily storing the info from each file into database tables in XI and then correlate the info from the two files to generate a single message.
Like this
File1 -> XI -> INSERT DATA XI ZDB1 (via ABAP Proxy or RFC)
File2 -> XI -> INSERT DATA XI ZDB2 (via ABAP Proxy or RFC)
Them I could use an event to check when the two tables have all the data from both files. I could then combine the data from the two tables and start another integration process like this
XI SERVER (ABAP Proxy) -> XI Integration Server -> Third-party (JDBC)
But this way I would have to code the hole data conversion which is not a good idea from the perspective of XI (EAI/Broker).
Maybe I sould use BPM. But how?
Futhermore:
Is BPM performant enough (we are talking about files with thousand of records)?
Thanks in advance
Diz

Hi,
for N:1 Multimapping you have to use BPM.
After going through this weblog you will be quite familiar with how to collect 2 messages into one message.
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
Steps:
1. Create a abstract/ inbound / outbound interfaces. (in your case 3 /1/2).
2. Perform 2:1 Multimapping.
You can specify more than one message in either side.
Just go to message tab in MM.
3. Now follow the blog and you will get a output in the form of abstract interface.
4. Define JDBC reciever Channel as usual.
Your database will be updated.
Just try this out.
Regards
Piyush

How to implement a file system in my app?

How to implement a file system in my app? So that we can connect to my iPhone via Finder->Go->Connect to Server. And my iPhone will show as a shared disk. Any ideas about it? Thanks.

Hi Rain--
From webdav.org:
DAV-E is a WebDAV client for iPhone, with free and full versions. It provides remote file browsing via WebDAV, and can be used to upload pictures taken with the iPhone.
http://greenbytes.de/dav-e.html
http://www.greenbytes.de/tech/webdav/
Hope this helps.

How can I do a system restore or bring back my Toshiba Sattelite A100 to its factory setting?

How can I do a system restore or bring back my Toshiba Sattelite A100 to its factory setting? I can't run my cd/dvd rw ( not knowing why it does not read )so I bought an external dvdr. I still have the product recovery cd. I really need help with this. E-mail me at [email protected]

dashaa wrote:
all the tutorials seem to leave out that part
Apple documentation seems to be providing all steps: OS X Yosemite: Erase and reinstall OS X
dashaa wrote:
thank you!!
Your welcome. I'm happy i could help.

I have video clips with 4 channels of audio, I can only hear audio recorded on channel one, how do I hear the other channels......?

I have video clips with 4 channels of audio, I can only hear audio recorded on channel one, how do I hear the other channels......?

What version of Premiere Elements and on what computer operating system?     Elements 13 on Windows 7
What is the brand/model/settings of the camera that recorded these videos?        ony PMW 320
When you import them into your Premiere Elements project, what does Premiere Elements Properties for that import give for
the audio description in the way of number of channels? If you open the Audio Meter (Window Menu/Audio Meters) and you play back
the video in the Premiere Elements Editor, how many channels does the Audio Meter display?
I just drag and drop video and when playing back only channel 1 will appear
What is your intended export for this video in terms of audio as well as video compression and formats?    MP4
I think you can only use audio if it's recorded on channel 1 or it does not recognize it.
Thanks for the help if possible,Kevin416 873 8374

Where to download and how to install X Window System for Oracle Linux 5 ?

Folks,
Hello. I am using Oracle Linux 5 and Oracle Database 11g for PIA.
Before install Oracle DB 11g into Oracle Linux 5, we need to install X Window System according to the document page 2 http://download.oracle.com/docs/cd/B28359_01/install.111/b32285.pdf
But I don't know where to download and how to install X Window System for Oracle Linux 5.
Can any folk provide a link to download X Window System and tutorial to install it for Oracle Linux 5 ?

You can address the problem in a number of different ways.
You can install X-windows from the installation DVD or setup access to the Oracle public software repository as described in http://public-yum.oracle.com. In which case, the command to install X-windows is: yum groupinstall "X Window System"
Or, you login remotely and and use SSH with X-forwarding, in which case the software on the server will use the X-Windows server on your client system. This is probably the preferred way since you do not have X-windows installed on the server. For more details about SSH forwarding and howto, please see Install Oracle 11gR2 on Ubuntu Linux 11.04 (64-bit) Howto part 2 Oracle Universal Installer.

How do I tell if dual channel is enabled?

I installed my memory in slots 1 & 3 (Corsair PC3200 TwinX) and every thing works just fine. But how do I know the systems is running in dual channel mode?
Thanks.

Quote
I get "Dual Channel Liner Mode" during start up. What is "Liner Mode" and is it something that can be changed?
Oh....
When I booted for the first time it said: ''Virtual Dual Channel or Single Channel''. Then I booted for the second time and it said ''Dual Channel''.
Maybe you should try to insert the DIMM's in memory slot's 2 and 4?

How to collect other mac

I'm using new iMac 27". I have Wifi and lan cable. How to collect other computer (Mac Os 10 and 9, PC win 7, XP)

What do you mean by 'collect'? Exactly what do you want to do with the old operating Mac systems and why? Generally these are not downloadable unless they are purchased. ($$).

GPP: Item Level Targeting - How are collections evaluated?

We are looking at optimizing a new VDI environment and are overhauling are GPOs which will be applied to those machines. Using a third party product, we're moving some of the user based settings into its management stack.
There are additional debates over whether or not we should create separate OUs for some geographical scenarios so that we can apply two different GPOs with only one setting difference... location. My feeling is that we should use a standard naming
convention on east vs west and use a single GPO with a computer name ILT to apply the east/west setting.
I can't seem to find anything with regards to how ILT collections are evaluated and what impact they may have on the system. Does ILT use WMI to evaluate the name or some other method?
Thanks

Hi,
Regarding the questions about Item-Level Targeting, Martin has already given a great explanation. Besides, for ILT, the following article can also be referred to for more information.
Preference Item-Level Targeting
http://msdn.microsoft.com/en-us/library/cc733022.aspx
>>I recall some issue where you can't use AGPM delegated permissions to manage site based policies?
AGPM is a advanced tool for group policy management and it's part of MDOP. Although it's related to group policy, Microsoft has a dedicated forum for AGPM questions. In order to get better assistance, we can ask for advice regarding AGPM
in that forum.
Microsoft Advanced Group Policy Management
https://social.technet.microsoft.com/Forums/windows/en-US/home?forum=mdopagpm
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
Best regards,
Frank Shen

Collection in source system error

Hi,
Recently we just performed a BW SP upgrade to 3.0B level 28. During our first extraction after upgrade on production for 0HR_PY_1 (Payroll Data) infosource, we encountered a message "Collection in source system ended".
Anybody has any clue about the cause and how to go about resolving it?
Thanks.
Best regards,
Taly

hi Taly,
datasource need to be replicated from source system (r/3) in production.
area to check -> in monitor request, menu 'environment' check job overview both bw(datawarehouse) and r/3(source system - equal to transaction sm37 - see if job cancelled and any helpful error message like sql error., from menu-environment check the same bw and r/3 for shortdump (st22), transaction rfc, ale management, system log(sm21) and so on, please let's know what's your finding there, possibly source system problem with that message, may ask basis for help. hope this helps.

How to collect provider's system channel

Similar Messages

Maybe you are looking for