How to combine two text fields from two lines to extend text.

I am working on a form to enter property descriptions sometimes it takes one and a half lines of text. Is there a way to force the first line of text to continue onto the next text field on the next line with out having to tab? I was wondering if there was something like a text overflow to the next field. An example is I might have two words in the middle of the second line and a field on both sides. I just want the top to connect to the first next line field.  pcwp55

This must be the day after Christmas or something Crazy people like me are still working. Okay -- I figured it out. Add a table with a single row and two columns, then insert a text field in each one, making it side-by-side. The trick is to make sure it is within the subform, and you must select the row and make sure to check "Allow Page Breaks within Content" on that row, because it isn't a default. It works. Thanks (to myself!).

Similar Messages

  • Auto Populate Drop Down and Text Fields from Other Drop Down and Text Fields

    Hi everyone
    I'm trying to pre populate a "Proposed Employment Status" drop down field with the selection from the "Current Employment Status" drop down field and allowing users to select another option if the proposed employment has changed. If it hasn't it would just remain as populated by the Current Employment Status" entry.
    I'm also trying to do this with text fields eg "Proposed Position Title" is populated with "Current Position Title". If the title changes in the bew employment arrangements users can enter it over the Proposed Position Title that is presented when the Current Position Title is entered.
    I can get it to work if the drop down or text field names are the same, but this doesnt solve the problem.
    Any ideas
    Regards,
    Michael

    Java is a full featured-language and you shouldn't have any problem doing the mathematics, etc.
    As far as the rest, Studio Creator is a relatively easy way to create the user interface that you describe. If supports drop-down selectable lists and standard form capabilities. A Web Application architecture would appear to be ideally suited to what you describe, and this is supported by SC. Be aware that this would require a server to serve the application to the client computer.
    If the server is a problem you could consider an applet that would be downloaded from a website, and then run entirely on the client computer. But the first approach is better.

  • How to add an animation to a text field with two lines?

    I have a text field with two or more lines. Why isn't it possible now to apply a text animation?

    For certain tasks, Titler and its Presets can be very good, and can simplify things greatly.
    However, when one gets beyond the limitations of the Titler, I really like to create my Titles in Photoshop, and Import those as Still Images into my Project. I then use the power of Keyframing various Effects over time. This allows me much more control, BUT does require more hand-work. Still, that added control is too important to me, and I sort of like doing the handwork.
    For the "alignment" of multiple Titles, to get multiple lines of Text, you can create the first Title, and then chose Duplicate Title. Initially, that will be identical, but you just change it, as is necessary. After you have changed that "second line of Text," place that Duplicate on the next Video Track, above the first Title, and use the Fixed Effect>Motion>Position, to move it down, to where it would be (by the height of the font, plus any desired Leading), if one had created a second line of Text on one Title.
    I also like to use Alignment Grids, when things get critical, and create those in Photoshop, with a trasparent background, and just place them, on say Video Track 2, with all of my Titles above that. Just do not forget to remove any Alignment Grids, before you Export/Share the Timeline, or they will be part of the output video.
    For more background on Keyframing (so very useful with more than just Titles), Steve Grisetti has done a multi-part tutorial, available as Basic Keyframing on Muvipix.com. I highly recommend it. Keyframing is simple to do, but can be a bit of a tough concept to grasp initially, and it's a subject that is tough to write about - takes longer to type instructions, than to do the work.
    Good luck,
    Hunt
    PS - Do not know if you saw them, but Titler has two Alignment Tools - Align Horizontally, and Align Vertically, that can be helpful to center Text.

  • Populating Multirecord text fields from Tlists value's combinations

    I have a UI wherein there are two T lists, one on the Left and other on the Right. The left one contains
    From values and the Right one contains To values. There's one Button which when Pressed should populate
    a Data Block which has multi record text fields just below the button with all the possible combinations of
    the T lists elements. The Text fields have the values From, To, Time, Unit. When populated From and Two will
    get the values from the combinations and the user will enter the values in other fields i.e. Time and Unit,
    Then the user can save the Records.
    e.g. If the Left T list contains Red, Blue and the Right T List contains Green, Black. Then on pressing
    the button below the T lists, the text fields From and Two of a data block displayed in the same window
    should get populated with all the possible combinations as:
    From || To || Unit || Time
    Red Green
    Red Black
    Blue Green
    Blue Black
    Now the user can enter the values for Unit as well as Time and when he does save the Records should be inserted
    for the Data Blocks DML Source that's some table.
    What I'm trying is:
    On pressing the Button i'm writing code that will have Two PL/SQL Tables(Index by binary_integer). One will have
    all the values of the left T List and the other with all the values of right T List.
    I do it as in the WHEN BUTTON PRESSED as:
    DECLARE
    TYPE varchar_table IS TABLE OF VARCHAR2(30) INDEX BY BINARY_INTEGER;
    from varchar_table;
    to varchar_table;
    v_count1 NUMBER;
    v_count2 NUMBER;
    v_count3 NUMBER;
    v_count4 NUMBER;
    BEGIN
    v_count1 := Get_List_Element_Count('CONTROL.FROM_TYPE');
         FOR i IN 1..v_count1 LOOP
              from(i) := Get_List_Element_Value('CONTROL.FROM_TYPE', i);
         END LOOP;
    v_count2 := Get_List_Element_Count('CONTROL.TO_TYPE');
         FOR i IN 1..v_count2 LOOP
              to(i) := Get_List_Element_Value('CONTROL.TO_TYPE', i);
         END LOOP;
    END;
    Now how will I populate the text fields with the values in the tables that i got with the piece of code above.
    Any help would be appreciated. Any other method other than the one i'm trying is also welcome. Please note that
    i'm not using any table to store the elements in the T Lists. The lists get values at runtime by
    user's selection.
    Thanks,
    Abhishek.

    Try and stay civil in your postings. The solotion should be to simply issue a GO_BLOCK, followed by a CREATE_RECORD followed by setting the approriate values :block.value = <value from list>

  • From two given tables, how do you fetch the values from two columns using values from one column(get values from col.A if col.A is not null and get values from col.B if col.A is null)?

    From two given tables, how do you fetch the values from two columns using values from one column(get values from col.A if col.A is not null and get values from col.B if col.A is null)?

    Hi,
    Use NVL or COALESCE:
    NVL (col_a, col_b)
    Returns col_a if col_a is not NULL; otherwise, it returns col_b.
    Col_a and col_b must have similar (if not identical) datatypes; for example, if col_a is a DATE, then col_b can be another DATE or it can be a TIMESTAMP, but it can't be a VARCHAR2.
    For more about NVL and COALESCE, see the SQL Language manual: http://docs.oracle.com/cd/E11882_01/server.112/e26088/functions119.htm#sthref1310
    I hope this answers your question.
    If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
    Explain, using specific examples, how you get those results from that data.
    Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
    See the forum FAQ: https://forums.oracle.com/message/9362002

  • How to Create a new column from two different result sets

    How to Create a new column from two different result sets, both the result set uses the different date dimensions.

    i got solutions for this is apply filters in column formula it self, based on the requirement.

  • How can I get the "text" field from the actionEvent.getSource() ?

    I have some sample code:
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    import java.util.ArrayList;
    public class JFrameTester{
         public static void main( String[] args ) {
              JFrame f = new JFrame("JFrame");
              f.setSize( 500, 500 );
              ArrayList < JButton > buttonsArr = new ArrayList < JButton > ();
              buttonsArr.add( new JButton( "first" ) );
              buttonsArr.add( new JButton( "second" ) );
              buttonsArr.add( new JButton( "third" ) );
              MyListener myListener = new MyListener();
              ( (JButton) buttonsArr.get( 0 ) ).addActionListener( myListener );
              ( (JButton) buttonsArr.get( 1 ) ).addActionListener( myListener );
              ( (JButton) buttonsArr.get( 2 ) ).addActionListener( myListener );
              JPanel panel = new JPanel();
              panel.add( buttonsArr.get( 0 ) );
              panel.add( buttonsArr.get( 1 ) );
              panel.add( buttonsArr.get( 2 ) );
              f.getContentPane().add( BorderLayout.CENTER, panel );
              f.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
              f.setVisible( true );
         public static class MyListener  implements ActionListener{
              public MyListener() {}
              public void actionPerformed( ActionEvent e ) {
                   System.out.println( "hi!! " + e.getSource() );
                   // I need to know a title of the button (which was clicked)...
    }The output of the code is something like this:
    hi! javax.swing.JButton[,140,5,60x25,alignmentX=0.0,alignmentY=0.5,
    border=javax.swing.plaf.BorderUIResource$CompoundBorderUIResource@1ebcda2d,
    flags=296,maximumSize=,minimumSize=,preferredSize=,defaultIcon=,disabledIcon=,
    disabledSelectedIcon=,margin=javax.swing.plaf.InsetsUIResource[top=2,left=14,bottom=2,
    right=14],paintBorder=true,paintFocus=true,pressedIcon=,rolloverEnabled=true,
    rolloverIcon=,rolloverSelectedIcon=,selectedIcon=,text=first,defaultCapable=true]
    I need this: "first" (from this part: "text=first" of the output above).
    Does anyone know how can I get the "text" field from the e.getSource() ?

    System.out.println( "hi!! " + ( (JButton) e.getSource() ).getText() );I think the problem is solved..If your need is to know the text of the button, yes.
    In a real-world application, no.
    In a RW application, a typical need is merely to know the "logical role" of the button (i.e., the button that validates the form, regardless of whether its text is "OK" or "Save", "Go",...). Text tends to vary much more than the structure of the UI over time.
    In this case you can get the source's name (+getName()+), which will be the name that you've set to the button at UI construction time. Or you can compare the source for equality with either button ( +if evt.getSource()==okButton) {...}+ ).
    All in all, I think the best solution is: don't use the same ActionListener for more than one action (+i.e.+ don't add the same ActionListener to all your buttons, which leads to a big if-then-else series in your actionPerformed() ).
    Eventually, if you're listening to a single button's actions, whose text change over time (e.g. "pause"/"resume" in a VCR bar), I still think it's a bad idea to rely on the text of the button - instead, this text corresponds to a logical state (resp. playing/paused), it is more maintainable to base your logic on the state - which is more resilient to the evolutions of the UI (e.g. if you happen to use 2 toggle buttons instead of one single play/pause button).

  • HT1449 how do you move all music from two computers into one itunes account?

    How do you move all music from two computers into one itunes account?

    An "iTunes account" is an online account you use for buying music, like a bank account.  An iTunes collection is the media you see when you open iTunes. Which do you mean?
    If it is two computers, it would also help to know where these are located. Are they on the same local network? If they are, try Home Sharing (and you have control of both and you aren't just trying to get music fro your computer to your friend's computer in another state).  If they are not, you'll have to use an external hard drive or flash drive.
    Is this on a PC? Your computer information says Windows but you posted this in the iTunes for Mac forum.

  • How can I tell if signals from two devices are truly synchronised?

    Hi there,
    How does one check that signals from two devices (two separate devices in a single X-series chassis) that should be synchronised actually are?   I am using a PXIe6361 and PXIe4331 on a PXIe-1073, with Labview 2001 SP1 64-bit. All devices are using the Sample Clock from the 4331 device, and an AI Start Trigger, so they should be synchronised.
    I thought that writing the signal data to file and checking the time stamp for each column of data would be the most accurate, but I have been told that timestamps are software created and therefore don't reflect the actual time that the signals were acquired by the hardware.  When I do this, the timestamps vary by up to 150ms which is larger than I expected.
    If I set the x-axis of the waveform graphs (on the GUI) to "Time" then it appears that the first data sample is taken at different times for the two plots (one plot per device).
    If I set the x-axis of the waveform graphs (on the GUI) to "Ignore time stamp" (so that the x-axis just starts from 0 rather than a date-time) then the first data point occurs at "0" for both graphs. However, I'm not sure that this reflects the actual alignment of the signal.
    What is the best way to check if signals collected on different devices in the same chassis are actually synchronised?
    Thanks,
    Claire.

    Hi Lynn,
    Thanks for your help and for sending the demo.
    I understand the concept of how the signals will look if they're not synchronised and your demo shows that nicely. I guess I have been perplexed by someone else telling me that the timestamps in the output file (and following from that I assume timestamps on a waveform graph) do not give an indication of whether signals are synchronised. The reason they gave for this was that the timestamps are manufactured by the software, not the DAQ hardware.  They suggested that I put the setting "ignore waveform timestamps" on my waveform graphs, and then check that both signals come in at the same time (i.e. both start at zero), but I'm not convinced about this. 
    When I use an analog trigger, neither the timestamps in my output file or on the two waveform graphs are synchronised. If I don't use the trigger, then there is far less disparity in the timestamps in the output file. I've attached two output files here, and my VI.
    This is my first attempt to synchronise a voltage module and a strain gauge module on an X-series chassis, so I want to make sure that I'm achieving the best synchronisation that I can, and the difference in behaviour with and without the trigger worries me.
    Thanks,
    Claire.
    Attachments:
    without trigger.txt ‏5 KB
    with trigger.txt ‏6 KB
    Multi-Device Synch-Analog Input-Finite Acq-Analog Start_Claire_wDigitalin_12June2012 PTbridge.vi ‏196 KB

  • How to compare two views/tabels from two systems via RFC

    Hello
    How to compare two views/tabels from two systems via RFC. I know there is a transactio or program but which

    Hi Tina,
    You can use a trnasactions like SCMP, SADJ or SCU0 - all tools to do comparison of customizing objects across clients/systems using RFC.
    Details of these tools, their usage and functionalities are available in the Help Portal -
    [http://help.sap.com/saphelp_47x200/helpdata/en/70/1accb7fab511d18e0f0000e8a48612/frameset.htm]
    Best Regards,
    Rekha

  • How to remove the automatically generated text fields from the InfoSet

    I followed the procedure by SAP help.
    Automatically generated text fields are marked with a 'T' on the icon in the InfoSet. You can remove the automatically generated text fields from the InfoSet in the initial screen of the InfoSet maintenance under Further Functions -> Delete Text Fields. Cancel the DataSource creation on the next screen and delete the text fields in the InfoSet maintenance transaction.
    I know that there is an option "No automatic text recognition" when I create a new InfoSet, however, I couldn't find out how to change an existed InfoSet. I checked menu Goto->Global Properties, but that option is disabled. Is there a way to remove text fields from an existed InfoSet?

    Hi,
    In the initial screen (when you enter transaction code SQ02) type your infoset name and goto menu: Infoset -> More functions -> Delete text fields. this will delete all text fields.
    I hope this helps to resolve the issue.
    Ram

  • I am wanting to exactly match two ID numbers from two differing worksheets within one work book. Once matched I am wanting to retrieve a row value from the second worksheet into the first. Any help much appreciated.

    I am wanting to exactly match two ID numbers from two worksheets within the one work book. ID numbers are non linear. Once exactly matched I wish to retrieve a corresponding row value from worksheet two and have it appear in worksheet one against the correct ID number. I have been looking at IF, VLOOKUP, and MATCH functions and suspect that what I want to do requires a combination of two or more. Any help will be greatly appreciated.
    regards Vaughanh

    Vaughan,
    Data A:D is all cells start at column A thru column D.
    There is built-in help using the menu item "View > Show Function Browser"  in the search field (top right) you can enter vlookup and you will see the detailed description.
    From this we see:
    VLOOKUP
    (search-for, columns-range, return-column, close-match)
    search-for:  The value to find. search-value can contain any value type.
    columns-range:  A range of cells. range is a reference to a single range of cells, which may contain values of any type.
    return-column:  A number that specifies the relative column number of the cell from which to return the value. return-column is a number value. The leftmost column in the range is column 1.
    close-match:  An optional value that determines whether an exact match is required.
    close match (TRUE, 1, or omitted):  If there’s no exact match, select the column with the largest top-row value that is less than the search value. Wildcards can’t be used in search-for.
    exact match (FALSE or 0):  If there’s no exact match, return an error. Wildcards can be used in search-for.
    So... the 2,0 means return the value form the same row as the lookup value but from the 2nd column of the range.  3, 0 means from the 3rd column.  the ", 0" means exact match

  • Is there a fax cover template?  If not, how can I have 2 text fields on one line?

    Is there a fax cover template?  If not, how do you add two text fields on one line?    

    No fax cover template. This forum posts explains how to put multiple fields on one line:
    http://forums.adobe.com/message/5032849

  • How can I create a form for users wherein the text field will expand to accommodate additional text?

    How can I create a form for users wherein the text field will expand to accommodate additional text?

    You need to use LiveCycle (PC Only) to create a dynamic form like that.
    The best you can do with Acrobat to view all of the text in a field is to set the field to multiline, and set the size to "Auto" (If you don't set the size to 'Auto', you can enter as much text as you wish, but the user will need to use the scrollbar to view all of the text.)

  • Remove text field from Array via for loop

    Hi,
    i have a problem to remove text fields added via for loop.
    That im doing is, via for loop im dynamically creating menu with 10 buttons.
    Each button contain, dynamically created, background (shape) and text field.
    And everything is fine.
    But when im try to remove text fields then i got this error:
    - Im using button to remove text fields - lang_btn.addEventListener(MouseEvent.CLICK, clickHandler);
    ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller.
              at flash.display::DisplayObjectContainer/removeChild()
              at Loading_Img_fla::MainTimeline/xmlLoaded()
              at flash.events::EventDispatcher/dispatchEventFunction()
              at flash.events::EventDispatcher/dispatchEvent()
              at flash.net::URLLoader/onComplete()
    In the script bellow marked with red is what should remove text fields from an Array, instead giving me error.
    Here is my script
    // Create for loop
    for (var i:int = 0; i < 10; i++)
              for each (xml in listItems)
                        if (i == xml.attribute("Id"))
                                  // Add MovieClip to stage to hold the data
                                  addChild(lmHolder);
                                  lmHolder.x = 0;
                                  lmHolder.y = 0;
                                  // Create new MovieClip to hold buttons
                                  lmButtonsMCArray[i] = new MovieClip();
                                  lmButtonsMCArray[i].buttonMode = true;
                                  lmButtonsMCArray[i].mouseChildren = false;
                                  lmButtonsMCArray[i].x = 20;
                                  lmButtonsMCArray[i].y = 20 + btCount * buttonSpace;
                                  // Add each button MovieClip to lmHolder MovieClip
                                  lmHolder.addChild(lmButtonsMCArray[i]);
                                  // Create Background to buttons
                                  lmButtonsArray[i] = new Shape();
                                  lmButtonsArray[i].graphics.beginFill(lmBgColor0, 1);
                                  lmButtonsArray[i].graphics.drawRect(0, 0, 230, 85);
                                  lmButtonsArray[i].x = 0;
                                  lmButtonsArray[i].y = 0;
                                  // <<-- Add Background shape to the buttons MovieClips
                                  lmButtonsMCArray[i].addChild(lmButtonsArray[i]);
                                  // Create a new array to preserve data from XML List
                                  lmNameArrayEG = new Array();
                                  lmNameArrayUS = new Array();
                                  // Create local variable to hold
                                  var lmTxtFieldContentUS:String;
                                  var lmTxtFieldContentEG:String;
                                  var lmTxtContent:String;
                                  // If clicked button is EG then make array with Arabic text
                                  // If clicked button is US then make array with English text
                                  if (footer.lang_btn.langState == "EG")
                                            for each (var leftMenuName:XML in egLanguageList)
                                                      lmNameArrayEG.push(leftMenuName);
                                            lmTxtFieldContentEG = lmNameArrayEG[i];
                                            lmTxtContent = lmTxtFieldContentEG;
                                  else
                                            for each (var leftMenuNameUS:XML in usLanguageList)
                                                      lmNameArrayUS.push(leftMenuNameUS);
                                            lmTxtFieldContentUS = lmNameArrayUS[i];
                                            lmTxtContent = lmTxtFieldContentUS;
                                  // Setup new text field each time script is executed
                                  lmTxtFieldsArray[i] = new TextField();
                                  lmTxtFieldsArray[i].width = 110;
                                  lmTxtFieldsArray[i].border = false;
                                  lmTxtFieldsArray[i].wordWrap = true;
                                  lmTxtFieldsArray[i].multiline = true;
                                  lmTxtFieldsArray[i].selectable = false;
                                  lmTxtFieldsArray[i].embedFonts = true;
                                  lmTxtFieldsArray[i].antiAliasType = AntiAliasType.ADVANCED;
                                  lmTxtFieldsArray[i].autoSize = TextFieldAutoSize.CENTER;
                                  lmTxtFieldsArray[i].text = lmTxtContent.toUpperCase();
                                  lmTxtFieldsArray[i].x = 10;
                                  lmTxtFieldsArray[i].name = "lmTxtFieldName" + i;
                                  // <<-- Add Text fields to the Movie Clip
                                  lmButtonsMCArray[i].addChild(lmTxtFieldsArray[i]);
                                  // If clicked button is EG then set Arabic text format, and make array with Arabic text fields
                                  // If clicked button is US then set English text format, and make array with Egnlish text fields
                                  if (footer.lang_btn.langState == "EG")
                                            lmTxtFieldsArray[i].setTextFormat(txtFormat_lm_eg);
                                            // Make array from text fields;
                                            pushEgTFintoArray.push(lmTxtFieldsArray[i]);
                                  else
                                            lmTxtFieldsArray[i].setTextFormat(txtFormat_lm_us);
                                            // Make array from text fields;
                                            pushUsTFintoArray.push(lmTxtFieldsArray[i]);
                                  // If clicked button is EG then loop thrue the for loop and remove English text fields from array
                                  // If clicked button is EG then loop thrue the for loop and remove Arabic text fields from array
                                  if (footer.lang_btn.langState == "EG")
                                            for (var rNr_us:Number = 0; rNr_us < pushUsTFintoArray.length; rNr_us++)
                                                      //remove the text field array from the display
                                       removeChild(pushUsTFintoArray[rNr_us]);
                                            //clear the array
                                            pushUsTFintoArray = [];
                                  else
                                            for (var rNr_eg:Number = 0; rNr_eg < pushEgTFintoArray.length; rNr_eg++)
                                                      //remove the text field array from the display
                                       removeChild(pushEgTFintoArray[rNr_eg]);
                                            //clear the array
                                            pushEgTFintoArray = [];
              btCount++;

    it looks like those tf's are children of  lmButtonsMCArray[i], not the current scope.  use:
    if (footer.lang_btn.langState == "EG")
                                            for (var rNr_us:Number = 0; rNr_us < pushUsTFintoArray.length; rNr_us++)
                                                      //remove the text field array from the display
                                        lmButtonsMCArray[rNr_us].removeChild(pushUsTFintoArray[rNr_us]);
                                            //clear the array
                                            pushUsTFintoArray = [];
                                  else
                                            for (var rNr_eg:Number = 0; rNr_eg < pushEgTFintoArray.length; rNr_eg++)
                                                      //remove the text field array from the display
                                        lmButtonsMCArray[rNr_eg].removeChild(pushEgTFintoArray[rNr_eg]);
                                            //clear the array
                                            pushEgTFintoArray = [];

Maybe you are looking for