How to comly 9iAS with SOAP1.2

I know that Oracle9iAS(R1.0.2.2) is complied with SOAP1.1
because namespace notice "http://www.w3.org/1999/XMLSchema".
Could you tell me how to comply it with SOAP1.2,
such as below?
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
I don't know how to change xmlnamespace.

With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, see if iTunes will launch without the error now.
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Similar Messages

How to come up with a magic number for any table that returns more than 32KB?

I am in a unique situation where in I am trying to retrieve values from multiple tables and publish them as XML output. The problem is based on the condition a few tables could retrieve data more than 32KB and a few less than 32KB. Less than 32KB is not an issue as XML generation is smooth. The minute it reaches greater than 32KB it generates a run time error. Just wondering if there is any way to ensure that the minute the query's results is greater than 32 kb, it should break say - if the results is 35KB, then I should break that result into 32 KB and 3kb; once done then pass this data to be published as an XML output. This is again not just for one table, but all the tables that are called in the function.
Is there any way?? I am unable to get any ideas nor have I done anything so complex from production support stand point. Would appreciate if someone can guide me on this.
The way it is, is as follows:
I have a table called ctn_pub_cntl
CREATE TABLE CTNAPP.ctn_pub_cntl
(ctn_pub_cntl_id          NUMBER(18)
,table_name                  VARCHAR2(50)
,last_pub_tms              DATE
,queue_name               VARCHAR2(50)
,dest_system              VARCHAR2(50)
,frequency                  NUMBER(6)
,status                      VARCHAR2(8)
,record_create_tms          DATE
,create_user_id                VARCHAR2(8)
,record_update_tms          DATE
,update_user_id             VARCHAR2(8)
,CONSTRAINT ctn_pub_cntl_id_pk PRIMARY KEY(ctn_pub_cntl_id)
Data for this is:
INSERT INTO CTNAPP.ctn_pub_cntl
(ctn_pub_cntl_id
,table_name
,last_pub_tms
,queue_name
,dest_system
,frequency
VALUES
(CTNAPP_SQNC.nextval
,'TRKFCG_SBDVSN'
,TO_DATE('10/2/2004 10:17:44PM','MM/DD/YYYY HH12:MI:SSPM')
,'UT.TSD.TSZ601.UNP'
,'SAP'
,15
INSERT INTO CTNAPP.ctn_pub_cntl
(ctn_pub_cntl_id
,table_name
,last_pub_tms
,queue_name
,dest_system
,frequency
VALUES
(CTNAPP_SQNC.nextval
,'TRKFCG_TRACK_SGMNT_DN'
,TO_DATE('02/06/2015 9:50:00AM','MM/DD/YYYY HH12:MI:SSPM')
,'UT.TSD.WRKORD.UNP'
,'SAP'
,30
INSERT INTO CTNAPP.ctn_pub_cntl
(ctn_pub_cntl_id
,table_name
,last_pub_tms
,queue_name
,dest_system
,frequency
VALUES
(CTNAPP_SQNC.nextval
,'TRKFCG_FXPLA_TRACK_LCTN_DN'
,TO_DATE('10/2/2004 10:17:44PM','MM/DD/YYYY HH12:MI:SSPM')
,'UT.TSD.YRDPLN.INPUT'
,'SAP'
,30
INSERT INTO CTNAPP.ctn_pub_cntl
(ctn_pub_cntl_id
,table_name
,last_pub_tms
,queue_name
,dest_system
,frequency
VALUES
(CTNAPP_SQNC.nextval
,'TRKFCG_FXPLA_TRACK_LCTN2_DN'
,TO_DATE('02/06/2015 9:50:00AM','MM/DD/YYYY HH12:MI:SSPM')
,'UT.TSD.TSZ601.UNP'
,'SAP'
,120
INSERT INTO CTNAPP.ctn_pub_cntl
(ctn_pub_cntl_id
,table_name
,last_pub_tms
,queue_name
,dest_system
,frequency
VALUES
(CTNAPP_SQNC.nextval
,'TRKFCG_FXPLA_TRACK_LCTN2_DN'
,TO_DATE('04/23/2015 11:50:00PM','MM/DD/YYYY HH12:MI:SSPM')
,'UT.TSD.YRDPLN.INPUT'
,'SAP'
,10
INSERT INTO CTNAPP.ctn_pub_cntl
(ctn_pub_cntl_id
,table_name
,last_pub_tms
,queue_name
,dest_system
,frequency
VALUES
(CTNAPP_SQNC.nextval
,'TRKFCG_FIXED_PLANT_ASSET'
,TO_DATE('04/23/2015 11:50:00AM','MM/DD/YYYY HH12:MI:SSPM')
,'UT.TSD.WRKORD.UNP'
,'SAP'
,10
INSERT INTO CTNAPP.ctn_pub_cntl
(ctn_pub_cntl_id
,table_name
,last_pub_tms
,queue_name
,dest_system
,frequency
VALUES
(CTNAPP_SQNC.nextval
,'TRKFCG_OPRLMT'
,TO_DATE('03/26/2015 7:50:00AM','MM/DD/YYYY HH12:MI:SSPM')
,'UT.TSD.WRKORD.UNP'
,'SAP'
,30
INSERT INTO CTNAPP.ctn_pub_cntl
(ctn_pub_cntl_id
,table_name
,last_pub_tms
,queue_name
,dest_system
,frequency
VALUES
(CTNAPP_SQNC.nextval
,'TRKFCG_OPRLMT_SGMNT_DN'
,TO_DATE('03/28/2015 12:50:00AM','MM/DD/YYYY HH12:MI:SSPM')
,'UT.TSD.WRKORD.UNP'
,'SAP'
,30
COMMIT;
Once the above data is inserted and committed, then I created a function in a package:
CREATE OR REPLACE PACKAGE CTNAPP.CTN_PUB_CNTL_EXTRACT_PUBLISH
IS
TYPE tNameTyp IS TABLE OF ctn_pub_cntl.table_name%TYPE INDEX BY BINARY_INTEGER;
g_tName tNameTyp;
TYPE tClobTyp IS TABLE OF CLOB INDEX BY BINARY_INTEGER;
g_tClob tClobTyp;
FUNCTION GetCtnData(p_nInCtnPubCntlID IN CTN_PUB_CNTL.ctn_pub_cntl_id%TYPE,p_count OUT NUMBER ) RETURN tClobTyp;
END CTNAPP.CTN_PUB_CNTL_EXTRACT_PUBLISH;
--Package body
CREATE OR REPLACE PACKAGE BODY CTNAPP.CTN_PUB_CNTL_EXTRACT_PUBLISH
IS
     doc           xmldom.DOMDocument;
     main_node     xmldom.DOMNode;
     root_node     xmldom.DOMNode;
     root_elmt     xmldom.DOMElement;
     child_node    xmldom.DOMNode;
     child_elmt    xmldom.DOMElement;
     leaf_node     xmldom.DOMNode;
     elmt_value    xmldom.DOMText;
     tbl_node      xmldom.DOMNode;
     table_data    XMLDOM.DOMDOCUMENTFRAGMENT;
     l_ctx         DBMS_XMLGEN.CTXHANDLE;
     vStrSqlQuery VARCHAR2(32767);
     l_clob        tClobTyp;
     l_xmltype     XMLTYPE;
--Local Procedure to build XML header
PROCEDURE BuildCPRHeader IS
BEGIN
    child_elmt := xmldom.createElement(doc, 'PUBLISH_HEADER');
    child_node := xmldom.appendChild (root_node, xmldom.makeNode (child_elmt));
    child_elmt := xmldom.createElement (doc, 'SOURCE_APLCTN_ID');
    elmt_value := xmldom.createTextNode (doc, 'CTN');
    leaf_node := xmldom.appendChild (child_node, xmldom.makeNode (child_elmt));
    leaf_node := xmldom.appendChild (leaf_node, xmldom.makeNode (elmt_value));
    child_elmt := xmldom.createElement (doc, 'SOURCE_PRGRM_ID');
    elmt_value := xmldom.createTextNode (doc, 'VALUE');
    leaf_node := xmldom.appendChild (child_node, xmldom.makeNode (child_elmt));
    leaf_node := xmldom.appendChild (leaf_node, xmldom.makeNode (elmt_value));
    child_elmt := xmldom.createElement (doc, 'SOURCE_CMPNT_ID');
    elmt_value := xmldom.createTextNode (doc, 'VALUE');
    leaf_node := xmldom.appendChild (child_node, xmldom.makeNode (child_elmt));
    leaf_node := xmldom.appendChild (leaf_node, xmldom.makeNode (elmt_value));
    child_elmt := xmldom.createElement (doc, 'PUBLISH_TMS');
    elmt_value := xmldom.createTextNode (doc, TO_CHAR(SYSDATE, 'YYYY-MM-DD HH24:MI:SS'));
    leaf_node := xmldom.appendChild (child_node, xmldom.makeNode (child_elmt));
    leaf_node := xmldom.appendChild (leaf_node, xmldom.makeNode (elmt_value));
END BuildCPRHeader;
--Get table data based on table name
FUNCTION GetCtnData(p_nInCtnPubCntlID IN CTN_PUB_CNTL.ctn_pub_cntl_id%TYPE,p_Count OUT NUMBER) RETURN tClobTyp IS
    vTblName      ctn_pub_cntl.table_name%TYPE;
    vLastPubTms   ctn_pub_cntl.last_pub_tms%TYPE;
BEGIN
            g_vProcedureName:='GetCtnData';
            g_vTableName:='CTN_PUB_CNTL';
        SELECT table_name,last_pub_tms
        INTO   vTblName, vLastPubTms
        FROM   CTN_PUB_CNTL
        WHERE ctn_pub_cntl_id=p_nInCtnPubCntlID;
    -- Start the XML Message generation
        doc := xmldom.newDOMDocument;
        main_node := xmldom.makeNode(doc);
        root_elmt := xmldom.createElement(doc, 'PUBLISH');
        root_node := xmldom.appendChild(main_node, xmldom.makeNode(root_elmt));
      --Append Table Data as Publish Header
        BuildCPRHeader;
      --Append Table Data as Publish Body
       child_elmt := xmldom.createElement(doc, 'PUBLISH_BODY');
       leaf_node := xmldom.appendChild (root_node, xmldom.makeNode(child_elmt));
       DBMS_SESSION.SET_NLS('NLS_DATE_FORMAT','''YYYY:MM:DD HH24:MI:SS''');
       vStrSqlQuery := 'SELECT * FROM ' || vTblName
                      || ' WHERE record_update_tms <= TO_DATE(''' || TO_CHAR(vLastPubTms, 'MM/DD/YYYY HH24:MI:SS') || ''', ''MM/DD/YYYY HH24:MI:SS'') ' ;
                    -- || ' AND rownum < 16'
      DBMS_OUTPUT.PUT_LINE(vStrSqlQuery);
       l_ctx := DBMS_XMLGEN.NEWCONTEXT(vStrSqlQuery);
      DBMS_XMLGEN.SETNULLHANDLING(l_ctx, 0);
      DBMS_XMLGEN.SETROWSETTAG(l_ctx, vTblName);
      -- Append Table Data as XML Fragment
      l_clob(1):=DBMS_XMLGEN.GETXML(l_ctx);
      elmt_value := xmldom.createTextNode (doc, l_clob(1));
     leaf_node := xmldom.appendChild (leaf_node, xmldom.makeNode (elmt_value));
     xmldom.writeToBuffer (doc, l_clob(1));
     l_clob(1):=REPLACE(l_clob(1),'<?xml version="1.0"?>', NULL);
     l_clob(1):=REPLACE(l_clob(1),'<', '<');
     l_clob(1):=REPLACE(l_clob(1),'>', '>');
     RETURN l_clob;
     DBMS_OUTPUT.put_line('Answer is' ||l_clob(1));
     EXCEPTION
        WHEN NO_DATA_FOUND THEN
        DBMS_OUTPUT.put_line('There is no data with' || SQLERRM);
        g_vProcedureName:='GetCtnData';
        g_vTableName:='CTN_PUB_CNTL';
        g_vErrorMessage:=SQLERRM|| g_vErrorMessage;
        g_nSqlCd:=SQLCODE;
        ctn_log_error('ERROR',g_vErrorMessage,'SELECT',g_nSqlCd,p_nInCtnPubCntlID,g_vPackageName,g_vProcedureName,g_vTableName);
        WHEN OTHERS THEN
       DBMS_OUTPUT.PUT_LINE('ERROR : ' || SQLERRM);
       ctn_log_error('ERROR',g_vErrorMessage,'OTHERS',g_nSqlCd,p_nInCtnPubCntlID,g_vPackageName,g_vProcedureName,g_vTableName);
END GetCtnData;
PROCEDURE printClob (result IN OUT NOCOPY CLOB) IS
    xmlstr   VARCHAR2 (32767);
    line     VARCHAR2 (2000);
BEGIN
    xmlstr := DBMS_LOB.SUBSTR (result, 32767);
    LOOP
       EXIT WHEN xmlstr IS NULL;
       line := SUBSTR (xmlstr, 1, INSTR (xmlstr, CHR (10)) - 1);
       DBMS_OUTPUT.put_line (line);
       xmlstr := SUBSTR (xmlstr, INSTR (xmlstr, CHR (10)) + 1);
    END LOOP;
END printClob;
END CTN_PUB_CNTL_EXTRACT_PUBLISH;
If you notice my query:
vStrSqlQuery := 'SELECT * FROM ' || vTblName
                      || ' WHERE record_update_tms <= TO_DATE(''' || TO_CHAR(vLastPubTms, 'MM/DD/YYYY HH24:MI:SS') || ''', ''MM/DD/YYYY HH24:MI:SS'') ' ;
                     || ' AND rownum < 16'
The minute I comment
|| ' AND rownum < 16' ;
, it throws an error because this query returns around 600 rows and all of those rows need to be published as XML and the tragedy is that there is a C program in between as well i.e. C will call my packged functions and then will do all the processing. Once this is done will pass the results back to C program. So obviously C does not recognise CLOB and somewhere in the process I have to convert the CLOB to VARCHAR or instead of CLOB I have to use VARCHAR array as a return type. This is my challenge.
Anyone that can help me to find out the required magic number and also a brief know how, I would appreciate that. Many thanks in advance.

Not sure I understand which part is failing.
Is it the C program calling your packaged function? Or does the error occur in the PL/SQL code, in which case you should be able to pinpoint where it's wrong?
A few comments :
1) Using DOM to build XML out of relational data? What for? Use SQL/XML functions.
2) Giving sample data is usually great, but it's not useful here since we can't run your code. We're missing the base tables.
3) This is wrong :
vStrSqlQuery := 'SELECT * FROM ' || vTblName                     || ' WHERE record_update_tms <= TO_DATE(''' || TO_CHAR(vLastPubTms, 'MM/DD/YYYY HH24:MI:SS') || ''', ''MM/DD/YYYY HH24:MI:SS'') ' ;
A bind variable should be used here for the date.
4) This is wrong :
elmt_value := xmldom.createTextNode (doc, l_clob(1));
createTextNode does not support CLOB so it will fail as soon as the CLOB you're trying to pass exceeds 32k.
Maybe that's the problem you're referring to?
5) This is most wrong :
     l_clob(1):=REPLACE(l_clob(1),'<?xml version="1.0"?>', NULL);
     l_clob(1):=REPLACE(l_clob(1),'<', '<');
     l_clob(1):=REPLACE(l_clob(1),'>', '>');
I understand what you're trying to do but it's not the correct way.
You're trying to convert a text() node representing XML in escaped form back to XML content.
The problem is that there are other things to take care of besides just '<' and '>'.
If you want to insert an XML node into an existing document, treat that as an XML node, not as a string.
Anyway,
Anyone that can help me to find out the required magic number
That would be a bad idea. Fix what needs to be fixed.
And please clearly state which part is failing : the C program or the PL/SQL code?
I'd vote for PL/SQL, as pointed out in [4].

9iAS with JDeveloper

Hi, i am new to Oracle9iAS
I would like to ask if there is any configuration guide for 9iAS online and how to use 9iAS with JDeveloper to deploy EJB.

best start is to use OTN (Oracle Technology Network at http://otn.oracle.com ). There you find a menu item called "documentation". if you follow the links, you will find all information you'll need. for 9iAS as an example you could try http://otn.oracle.com/docs/products/ias/doc_library/90200doc_otn/core.htm , for 9ijdeveloper you could try the online help at http://otn.oracle.com/jdeveloper-preview/help/

I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone an i have internet and all other functions working on my computer

I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone and i have internet and all other functions working on my computer

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—the text, not a screenshot. I know the report is long. Please post all of it anyway.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

When i double click itunes it doesn't open it just comes up with an error saying " The itunes library.itl file cannot be found or created. The default location for this file is in the 'itunes' folder in the 'music' folder". How can i fix this?

When i double click itunes it doesn't open it just comes up with an error saying " The itunes library.itl file cannot be found or created. The default location for this file is in the 'itunes' folder in the 'music' folder. How can i fix this problem?

Anyone can help to advice how to solve this issue ?

I'm having trouble downloading an update to my MacBook Pro. It comes up with my husband's name even though the MacBook is registered under my name and I have my own ITunes acct. how do I get his name off the ITunes update on my Mac

I'm trying to download an automatic update from ITunes but when I click on "Update" it comes up with the message, "You have updates available for other accounts" an tells me to sign in to my husband's account, even though the MacBook is registered in my name and I have my own ITunes account. My husband has his own MacBook and ITunes acct. How do I fix?

Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID.
Apple ID FAQs
http://support.apple.com/kb/HE37

How do I get to download music with a different id when it comes up with the message cannot download for 90 days

I need to know how to do this as well because before I got an iPad I hot an iPod nano and an iPod touch but because I was too young I wasn't aloud my own Apple ID and I used my mums. Through those years I got a lot of iTunes vouchers and I spent them on films and music. Last year I got an iPad and was aloud to make my own Apple ID I've downloaded a few songs and films but want my films and songs from my iPods but when I log in to my mums account on my iPad and try to download films and music but it comes up with you cannot download this item for 90 days because you have been as scouted with a different account. But I really can't wait 3 months at the moment cause haven't watched this film for ages. Please someone help me this is unfair this needs to be changed how could Apple be so harsh

it only happens for previous purchases - if you have a computer you can try to download your purchase history there and then just sync them to your device - http://support.apple.com/kb/ht2519 - http://support.apple.com/kb/ht1386.

I've a new account on iMac. When composing an email the contact list does not show up on the bar. WWhen I start keying in a name, it comes up with the address. How do I engage the contact list from the email?

I've a new account on iMac. When composing an email the contact list does not show up on the bar, which would allow me to select the persons I want to include on the distribution of the email. When I start keying in a name in the email, it comes up with the person's address, which shows it is synced. How do I engage the contact list from the email like I do on my old account (where a contact list icon shows up, along with the "attach" and other icons) ?

With the New Message window open, go to the View menu and select "Customize Toolbar...".
In the screen that opens, drag the item labelled "Address" into the Toolbar area of the New Message window, then click the "Done" button.
That item should be then added to the Toolbar for the New Message window.
Note that the main Mail window and the New Message window (as well as the separate message window if you open a message that way) use different toolbars - the settings/inclusions for one do not carry over to another.

HT1311 Have changed my Apple id to a new email address. its all working fine on my pc and also comes up with the new id on my icloud page on my iphone, but when i tryto buy something from i tunes on the phone the sign in box still has the old id. how do i

Have changed my apple Id to a new email address. its all working fine on my PC and also on come up with the new ID on my icloud page on my iphone but when i try to buy something from itunes etc on my phone, the log in box still contains the old id.
how do i change this?

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
It doesn't sound like you "changed" your Apple ID, sounds like you created a new one. Bad idea. All content bought with an Apple ID is forever tied to that ID. The ID that bought the content is the only ID that can update the content. Apple does not merge IDs not does Apple transfer content from one ID to another.

How can I do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder which does not have firewire out/input? it comes only with a component video output, USB, HDMI and composite RCA output?

I need to do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder (http://store.sony.co...ber=HDRAX2000/H) ..this camcorder model does not have firewire out/input ..it comes only with a component video output, USB, HDMI and composite A/V video output..
I wonder how can I plug this camcorder to the firewire port of my laptop? Browsing on internet I found that Grass Valley Company produces this converter http://www.amazon.co...=A17MC6HOH9AVE6 ..but I am not sure -not even after checking the amazon reviews- if this device will send the video signal through firewire to my laptop, in order to live streaming properly? ..anyone in this forum could help me please?
Thanx

I can't broadcast with the built in iSight webcam... how would I zoom in or zoom out? or how would I pan? I've seem people doing it walking with their laptops but that's not an option for me... there's nothing wrong with my USB ports but that's neither an option to stream video because as far as I know through USB you can't connect video in apple operating systems ..you can for sure plug any video cam or photo camera through usb but as a drive to transfer data not as a live video camera... is by firewire an old interface developed by apple that you can connect all sorts of cameras to apple computers... unfortunately my new sony HDR-AX2000 camcorder doesn't have firewire output...
thanx

I am trying to burn a dvd on my mac book pro but it comes up with an error code 0x80020022. How do I fix it? Thanks

I am trying to burn a dvd on my mac book pro but it comes up with an error code 0x80020022. How do I fix it? I have tried rebooting through PRAM and various other options that I found online, but nothing has helped.
Thanks

Try using a different brand of DVD's.

Hello hi, i just won't to ask, if there has been any changes on how to find a stolen phone, did some one come up with a fare and good solution. as it is not fare at all when some one could use it for free and there is a lot of things could be done to this

hello hi, i just won't to ask, if there has been any changes on how to find a stolen phone, did some one come up with a fare and good solution, new Apps. as it is not fare at all when some one could use it for free and there is a lot of things could be done to this condition, no one seem to care,
i have a story about my sister, am talking on her behalf, she got stolen her phone at a caffee when she just come from a horeble exam, she was very mad and having haedace for not doing well at the exam, i ask her if we could have coffee before we go home, once she sate; while i was getting the coffee for her, some one snicked to her pocket and took the phone, immidatly she feelt it and went on to searching, but nathing was hopefull. what makes it more heart braking is that she worked day and night just to buy the phone and pay for her books and so on as a student. she use to work 16 houres a day before she had to start school. 8 houres in one place and then to the other place. and she was always demanding for more houres to work; one day her boss saw her on her other job and she was serprised to see her and saied OHhh my God Milly if you work like this, i wonder if you servive, how could you also ask for more houres, My sis had to do it she has no parents or any thing, well the phone was taken after only two months of having it. the sad thing is she stile dream having it even though she can't think of buying againe. well me i have tryed a lot of things but i know some were out there there is a solution for people like this, it is not always fare for some one who has payed up to 800 to just loose his ......
Thnks

I'm sorry, but your sister, unless she had already turned on the "Find my iPhone" feature and the person who took the phone has not disabled it, is out of luck. She should report the theft to local police authorities, including the serial number of her iPhone. While her experience is unfortunate, there are good reasons why Apple cannot do anything else about it.
I hope she gets her phone back.
Best of luck.

When I press on a land line number, the phone does not call the number, but comes up with a screen to send a text to it. How do I get my phone to default to phoneing a landline?

When I press on a land line number, the phone does not call the number, but comes up with a screen to send a text to it. How do I get my phone to default to phoneing a landline? When I press a mobile number in contacts, the phone automatically phones the number. I do not mind this as I hardly ever send texts, but I would like to have the option of what to do. This seems such an obvious issue but I can not solve it even with much web searching. Thanks!

I can't delete my question, so I'll just say that you press on the type of number written in the box to the left of the box you typye the number into. Dumb or what?

When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA

When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA

You can try downloading the 64 bit version. You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

How to open Camera Raw in Bridge, it comes up with the following error

How to open Camera Raw in Bridge, it comes up with the following error Bridge parent application is not Active   Bridge requires that a qualifing product has been lanched at least once to enable this feature. It opens in Photoshop CS6 & Elements 10 but not Bridge?

You need to look at all programs in your uninstall list, and see if you spot any old trials that are no longer active.
Camera Raw in Bridge and PS are the same program, so its not the program but access. Would have been nice it you had stated OS, but here are locatons of camera raw for both OS.
Win           Users/[user name]/AppData/Roaming/Adobe/Adobe Photoshop CS5/Adobe Photoshop CS5 Settings    note: appdata a hidden file.
Mac          Users/[user name]/Library/Preferences

How to comly 9iAS with SOAP1.2

Similar Messages

Maybe you are looking for