How to compare the query definiation of two or more queries?
HI Folks.
I am attempting to determine if there is a method by which I can compare query definination of two or more queries or shows me the differences between queries.
Transaction RSRTQ only give the query details of single query at a time and doesnot do a comparison.
Please let me know a method to undertake this?
Thanks
Uday
There is no straight way of doing this:
I normally open the definitions in 2 sessions and compare them manually.
Hope this helps
Similar Messages
-
How to compare the codes written in two different windows?
Hi ,
I have a long code written for a FM.
Now I have got the same code in a notepad.
I want to check weather the codes in the two windows are exactly alike.
Is there any easy way to do this?hi Harshit Rungta ,
T-code SE39 - ABAP split screen editor use to compare 2 different programs ,function modules ,class
just create a function module that available in notepad and compare the code which u have already .
choose the function radio button while checking the function module .
regards
chinnaiya -
How to compare the *.so files of two different directories?
Good morning,
I am working in a software development company that works as follows:
- we have a platform, that consists of a list of *.so files.
- we deliver a product, based on that platform, that also consists of a list of *.so files.
- all our sources are managed via Clearcase.
Now I have the following situation:
- we have created a new Clearcase view, where we (should have) all correct sources. These have been compiled, resulting in a list of *.so files.
- we have a copy of the product that we have delivered at the client.
I would like to verify whether the *.so files of the new Clearcase view are the same as the ones that have been delivered to the client.
Why is this such a problem?
- I could check the "cksum" result, but as the Solaris command "cksum" takes into account the compilation date, I have different "cksum" results for *.so files that are basically equal.
- I could check the filesize, but a small change in a source might change the behaviour of the *.so file but not necessarily its filesize.
- I could check the "what" result (the "C Compilation System" "what" command), which gives the Clearcase status, so that I can check whether the same Clearcase versions have been delivered, but while doing this, I have seen that *.so files have been delivered, the sources of which were checked OUT (!), so also this does not give me any certainty.
- In addition, it is possible that there is a change in the platform components, resulting in a different product specific *.so file, which however does not mean that the behaviour of the product specific *.so file is different.
Therefore I am looking for another way of comparing two binary *.so files, in order for me to judge the correctness of the new Clearcase view.
Does anybody have an idea?
Thanks
DominiqueThanks Alan for the fast response,
Unfortunately, I don't have "elfsign" on my system and reading more about the command, I have the impression that this command can verify whether a signature is correct, but in order to do so, the file needs to be signed before, which is not the case here.
Do you have other suggestions?
Thanks
Dominique
P.s. yesterday, another issue popped up: the *.so files I am referring to are compiled from a whole list of files, and it seems that the "what" command can only check the Clearcase history of the hole list, while in our department, mostly only the impacted files are checked out/checked in for doing an update, and not the hole list of files, causing the "what" command to give erroneous results. -
How to restrict the filters' interaction between two (or more) dashboard pages?
Hello,
I work in OBIEE 10.1.3. and I don't have a lot of experiense with this product.
I have a problem with report filters’ interaction between dashboard pages. I have created two pages in one dashboard and I navigate from page 1 to page 2. Reports from page 2 have more restrictive data filters (for example, Fiscal Month = Current Month & Fiscal Year = Current Year) than reports from page 1 (Fiscal Month <= Current Month & Fiscal Year = Current Year). If I start from the page 1 and then navigate to the page 2 by clicking on the column that is used for navigation all reports on both pages work fine. However, when I return to page 1 (by clicking on the page name) the data in the reports there is skewed, displaying only the data for Fiscal Month = Current Month. I checked the reports filters and they all get reset from (Fiscal Month <= Current Month) to (Fiscal Month = Current Month). I tried to resolve this by canging filters back to what they were, saving the report, and starting over, but it does not help.
If anyone knows the solution for my problem, please respond to my post.
Thank you,You can use this workaround:
Page1: Fiscal Month : CASE WHEN 1=1 THEN 'Fiscal Month' END
Make this field as 'is prompted' for all the reports in page1.
For Page2:
Fiscal Month : CASE WHEN 2=2 THEN 'Fiscal Month' END
Make this field as 'is prompted' for all the reports in page2.
This way OBIEE will treat them as two separate fields and the filters will not be messed up. -
How to compare the contents of two different tables
hello. can somebody give me an idean on how to compare the contents of two different tables in mysql?
example, i have a table named Main List and a table named New List.
The contents of the New List should be compared to the contents of the
Main List, to check if they are equal. I don't have any idea how to manipulate
this data. Hoping for your help. Thanks.it is better to comapre it using java.. try get the resultset first and store that in collections then comapre the two collections
-
How to compare the programs in two different systems
Hi,
I have two systems say A & B and i have the program say 'Z_TESTPROG'.
How to compare the program in two different systems.
Regards,
VenkatHi,
Check the version in Utilities -> version -> version management in both servers is one option.
Another one is using SE39 transaction.
Regards
Manasa -
Gurus,
Please clarify this
Select ils.item,(nvl(sum(decode(tdh.loc_type,'S',decode(tdh.tran_code, 1,tdh.units,0),
'W',decode(tdh.tran_code,30,0,31,0,32, tdh.units,33, tdh.units,37,0,38, tdh.units,20,0,1,0))),0))"result"
from tran_data_history tdh, item_loc_soh ils
where tdh.item = ils.item
and ils.item in('100002513','100002484')
and trunc(tdh.TRAN_DATE)
between (*select first_date from (select item,min(trunc(first_received)) first_date From Item_loc_soh*
where item in('100002513','100002484') and first_received is not null
group by item ))
and trunc(sysdate)
group by ils.item
Problem with this query is, the block mentioned in BOLD is returning two rows, and I am writing between and clause .. since the query in bold is returning more than one row, it is throwing error stating that single query returns more than one row .. Requirement is, whatever date which is returned with value 100002513 should be compared with sysdate, and other value 100002484 should be compared with sysdate .. Irrespective of number of items (whether 1 or more than 1) should simultaneously be compared with sysdate
How to change my query
RegardsInner query
Select First_Date From (Select Item, Min(Trunc(First_Received)) First_Date
From Item_Loc_Soh *
Where Item In ('100002513', '100002484')
And First_Received Is Not Null
Group By Item)
this will return 2 rows for each of the item id 2513 and 2484 because you write query for this 2 rows
and select min date
which means
item id 2513 min date
item id 2482 min date
if you want to compare just a date to sysdate then do it directly,
Select Ils.Item,
(Nvl(Sum(Decode(Tdh.Loc_Type,
'S',
Decode(Tdh.Tran_Code, 1, Tdh.Units, 0),
'W',
Decode(Tdh.Tran_Code,
30,
0,
31,
0,
32,
Tdh.Units,
33,
Tdh.Units,
37,
0,
38,
Tdh.Units,
20,
0,
1,
0))),
0)) "result"
From Tran_Data_History Tdh, Item_Loc_Soh Ils
Where Tdh.Item = Ils.Item
And Ils.Item In ('100002513', '100002484')
And Trunc(First_Received) = Sysdate;
however i dont understand importance of Tdh.Tran_Date and which date you exactly want to compare
hope this helps,
if not plz clarify more on the questionsEdited by: Nicloei W on Sep 24, 2008 11:51 PM -
How to compare to query definitions ?
Hello community of experts,
Does anyone know how to compare two query definitions without looking at either the query builder or query results?
I want to prove that two queries are identical only by looking at the BW system itself.
BACKGROUND
For `certifying` queries that were developed directly in production we have the practice of transporting queries backwards to development, renaming them to a new namespace, and then transporting them forward to production again.
The queries that were transported up from the dev system cannot be changed in the prod system (except by another transport, and this makes those queries `certified`).
My goal is to automate the proof, making it easier to create the test documents required for transporting out of development again.
If we can proove that the query being transported out has the same query definition as the query the user wrote in production, then life will be a lot easier.
The query definitions are complex, which means eyeballing the query builder isn't reliable. And often the DEV & QA systems don't have the data needed for comparing the query results.
Thanks for your help!
KeithI used the following:
rszcomdir
rsrrepdir
rszeltxref
rszeltdir
rszelttxt
rszcel
rszcalc
rszselect
rszrange
rszopratxt
the SAP transaction uses function module RSZ_DB_ELT_GET (it might already be available in 3.5... but then again, it might not)
good luck! -
How to find the structural difference between two tables
Hi all,
How to find the structural difference between two tables .
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - Production
PL/SQL Release 11.1.0.7.0 - Production
CORE 11.1.0.7.0 Production
TNS for 32-bit Windows: Version 11.1.0.7.0 - Production
NLSRTL Version 11.1.0.7.0 - Production
Thanks,
P Prakashyou could try something similar to this, for each table pair that you want to compare:
SELECT 'TABLE_A has these columns that are not in TABLE_B', DIFF.*
FROM (
SELECT COLUMN_NAME, DATA_TYPE, DATA_LENGTH
FROM all_tab_columns
WHERE table_name = 'TABLE_A'
MINUS
SELECT COLUMN_NAME, DATA_TYPE, DATA_LENGTH
FROM all_tab_columns
WHERE table_name = 'TABLE_B'
) DIFF
UNION
SELECT 'TABLE_B has these columns that are not in TABLE_A', DIFF.*
FROM (
SELECT COLUMN_NAME, DATA_TYPE, DATA_LENGTH
FROM all_tab_columns
WHERE table_name = 'TABLE_B'
MINUS
SELECT COLUMN_NAME, DATA_TYPE, DATA_LENGTH
FROM all_tab_columns
WHERE table_name = 'TABLE_A'
) DIFF;that's assuming, column_name, data_type and data_length are all you want to compare on. -
Comparing the creation time of two jars.
Hi,
My requirement is that i need to compare the creation time of two of the jars and see which one of the jar is the latest.
I did it using the following code i get the output in the form of strings so i cant compare them to find which one is the latest.
import java.io.*;
import java.util.*;
public class FileTest {
public static void main(String args[]) {
File devbuild = new File(
"\\\\devspace\\dev$\\ReleaseEng\\DEVbuilds\\tw_enterprise\\build\\jboss\\Oracle\\Twelibrary.jar");
File local = new File(
"D:\\jboss-4.2.1.GA\\server\\TWEServer\\Twelibrary.jar");
Calendar now = Calendar.getInstance();
int currtime = now.get(Calendar.HOUR_OF_DAY);
int maxtime = 18;
System.out.println("Before the while loop");
while (currtime < maxtime) {
System.out.println("Inside the while loop");
if (devbuild.exists()) {
try {
// get runtime environment and execute child process
Runtime systemShell = Runtime.getRuntime();
BufferedReader br1 = new BufferedReader(
new InputStreamReader(new FileInputStream(devbuild)));
BufferedReader br2 = new BufferedReader(
new InputStreamReader(new FileInputStream(local)));
Process output = systemShell.exec("cmd /c dir " + devbuild);
Process output1 = systemShell.exec("cmd /c dir " + local);
// open reader to get output from process
BufferedReader br = new BufferedReader(
new InputStreamReader(output.getInputStream()));
BufferedReader br3 = new BufferedReader(
new InputStreamReader(output1.getInputStream()));
String out = "";
String out1 = "";
String line = null;
String line1 = null;
int step = 1;
int step1 = 2;
while ((line = br.readLine()) != null) {
if (step == 6) {
out = line;
step++;
} // display process output
while ((line1 = br3.readLine()) != null) {
if (step1 == 6) {
out1 = line1;
step1++;
try {
out = out.replaceAll(" ", "");
out1 = out1.replaceAll(" ", "");
System.out.println("CreationDate: "
+ out.substring(0, 10));
System.out.println("CreationTime: "
+ out.substring(10, 16) + "m");
System.out.println("CreationDate: "
+ out1.substring(0, 10));
System.out.println("CreationTime: "
+ out1.substring(10, 16) + "m");
} catch (StringIndexOutOfBoundsException se) {
System.out.println("File not found");
//Long modifiedtime = devbuild.lastModified();
//long oldtime = old.lastModified();
int devbuilddate = Integer.parseInt(out.substring(0, 10));
int devbuildtime = Integer.parseInt(out.substring(10, 16));
int localbuilddate = Integer.parseInt(out1.substring(0, 10));
int localbuildtime = Integer.parseInt(out1.substring(10, 16));
if (devbuilddate >= localbuilddate && devbuildtime >= localbuildtime) {
System.out.println("The Build date is Later than the one i am having--->");
System.exit(6);
} else {
System.exit(0);
} catch (Exception e) {
e.printStackTrace();
if (currtime > maxtime) {
System.exit(5);
How can i do it?
Can anyone help me out in this.
Thanks,
Kavipriya.Hi Clap,
Thanks for ur reply. Let me say you the scenario clearly. We are in the process of automating some of the process. We have builds running daily night and our automation will run using that build.
Currently the build which is getting generated does have manifest in it. For our automation framework we cant suggest adding the manifest. Which will not be agreed.
Our automation will be checking till 10.am. to check whether the build is ready if not it will come out of the loop. If the build is avaialble within 10 then it will take the build and see whetehr the creation date and time of the build and the one i am having locally or different. If diff it will see whether the build generated is latest than the one i am having.
If it so then the process will run.
So hope you got my issue. -
How to make af: query (ResultComponentId) has two target values?
hello all :D
i'm newbie in jdev, i have little problem with af:query.
how to make af: query (ResultComponentId) has two target values?
thx
agungdmt :DI think you can simply set the second target control's partialTrigger to the af:query.
and access to the same binding attribute as your first target. (e.g.: if you have 2 target tables, set the value to #{bindings.XxxxxVO1.collectionModel})
Samson Fu -
How to get the query values from the url in a servlet and pass them to jsp
ok..this is the situation...
all applications are routed through a login page...
so if we have a url like www.abc.com/appA/login?param1=A¶m2=B , the query string must be passed onto a servlet(which is invoked before the login page is displayed)..the servlet must process the query string and then should pass all those values(as hidden values) to the login jsp..then user enters username and pswd, then there should be another servlet which takes all the hidden values of jsp and also username and pswd, authenticates the user and sends the control back to that particular application along with the hidden values...
so i need help on how to parse the query string from the original url in the servlet, pass it out to jsp, and then pass it back to the servlet and back to the original application...damnn...any help would be greatly appreciated...thanksok..this is the situation...Sounds like you have a bad design on your hands.
You're going to send passwords in a GET request as clear text? Nice security there.
Why not start with basic security and work your way up?
% -
How to improve the query performance in to report level and designer level
How to improve the query performance in to report level and designer level......?
Plz let me know the detail view......first its all based on the design of the database, universe and the report.
at the universe Level, you have to check your Contexts very well to get the optimal performance of the universe and also your joins, keep your joins with key fields, will give you the best performance.
at the report level, try to make the reports dynamic as much as you can, (Parameters) and so on.
and when you create a paremeter try to get it match with the key fields in the database.
good luck
Amr -
How to improve the query performance or tune query from Explain Plan
Hi
The following is my explain plan for sql query. (The plan is generated by Toad v9.7). How to fix the query?
SELECT STATEMENT ALL_ROWSCost: 4,160 Bytes: 25,296 Cardinality: 204
8 NESTED LOOPS Cost: 3 Bytes: 54 Cardinality: 1
5 NESTED LOOPS Cost: 2 Bytes: 23 Cardinality: 1
2 TABLE ACCESS BY INDEX ROWID TABLE AR.RA_CUSTOMER_TRX_ALL Cost: 1 Bytes: 13 Cardinality: 1
1 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.RA_CUSTOMER_TRX_U1 Cost: 1 Cardinality: 1
4 TABLE ACCESS BY INDEX ROWID TABLE AR.HZ_CUST_ACCOUNTS Cost: 1 Bytes: 10 Cardinality: 1
3 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.HZ_CUST_ACCOUNTS_U1 Cost: 1 Cardinality: 1
7 TABLE ACCESS BY INDEX ROWID TABLE AR.HZ_PARTIES Cost: 1 Bytes: 31 Cardinality: 1
6 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.HZ_PARTIES_U1 Cost: 1 Cardinality: 1
10 TABLE ACCESS BY INDEX ROWID TABLE AR.RA_CUSTOMER_TRX_ALL Cost: 1 Bytes: 12 Cardinality: 1
9 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.RA_CUSTOMER_TRX_U1 Cost: 1 Cardinality: 1
15 NESTED LOOPS Cost: 2 Bytes: 29 Cardinality: 1
12 TABLE ACCESS BY INDEX ROWID TABLE AR.RA_CUSTOMER_TRX_ALL Cost: 1 Bytes: 12 Cardinality: 1
11 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.RA_CUSTOMER_TRX_U1 Cost: 1 Cardinality: 1
14 TABLE ACCESS BY INDEX ROWID TABLE ONT.OE_ORDER_HEADERS_ALL Cost: 1 Bytes: 17 Cardinality: 1
13 INDEX RANGE SCAN INDEX (UNIQUE) ONT.OE_ORDER_HEADERS_U2 Cost: 1 Cardinality: 1
21 FILTER
16 TABLE ACCESS FULL TABLE ONT.OE_TRANSACTION_TYPES_TL Cost: 2 Bytes: 1,127 Cardinality: 49
20 NESTED LOOPS Cost: 2 Bytes: 21 Cardinality: 1
18 TABLE ACCESS BY INDEX ROWID TABLE AR.RA_CUSTOMER_TRX_ALL Cost: 1 Bytes: 12 Cardinality: 1
17 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.RA_CUSTOMER_TRX_U1 Cost: 1 Cardinality: 1
19 INDEX RANGE SCAN INDEX (UNIQUE) ONT.OE_ORDER_HEADERS_U2 Cost: 1 Bytes: 9 Cardinality: 1
23 TABLE ACCESS BY INDEX ROWID TABLE AR.RA_CUSTOMER_TRX_ALL Cost: 1 Bytes: 12 Cardinality: 1
22 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.RA_CUSTOMER_TRX_U1 Cost: 1 Cardinality: 1
45 NESTED LOOPS Cost: 4,160 Bytes: 25,296 Cardinality: 204
42 NESTED LOOPS Cost: 4,150 Bytes: 23,052 Cardinality: 204
38 NESTED LOOPS Cost: 4,140 Bytes: 19,992 Cardinality: 204
34 NESTED LOOPS Cost: 4,094 Bytes: 75,850 Cardinality: 925
30 NESTED LOOPS Cost: 3,909 Bytes: 210,843 Cardinality: 3,699
26 PARTITION LIST ALL Cost: 2,436 Bytes: 338,491 Cardinality: 14,717 Partition #: 29 Partitions accessed #1 - #18
25 TABLE ACCESS BY LOCAL INDEX ROWID TABLE XLA.XLA_AE_HEADERS Cost: 2,436 Bytes: 338,491 Cardinality: 14,717 Partition #: 29 Partitions accessed #1 - #18
24 INDEX SKIP SCAN INDEX XLA.XLA_AE_HEADERS_N1 Cost: 264 Cardinality: 1,398,115 Partition #: 29 Partitions accessed #1 - #18
29 PARTITION LIST ITERATOR Cost: 1 Bytes: 34 Cardinality: 1 Partition #: 32
28 TABLE ACCESS BY LOCAL INDEX ROWID TABLE XLA.XLA_AE_LINES Cost: 1 Bytes: 34 Cardinality: 1 Partition #: 32
27 INDEX RANGE SCAN INDEX (UNIQUE) XLA.XLA_AE_LINES_U1 Cost: 1 Cardinality: 1 Partition #: 32
33 PARTITION LIST ITERATOR Cost: 1 Bytes: 25 Cardinality: 1 Partition #: 35
32 TABLE ACCESS BY LOCAL INDEX ROWID TABLE XLA.XLA_DISTRIBUTION_LINKS Cost: 1 Bytes: 25 Cardinality: 1 Partition #: 35
31 INDEX RANGE SCAN INDEX XLA.XLA_DISTRIBUTION_LINKS_N3 Cost: 1 Cardinality: 1 Partition #: 35
37 PARTITION LIST SINGLE Cost: 1 Bytes: 16 Cardinality: 1 Partition #: 38
36 TABLE ACCESS BY LOCAL INDEX ROWID TABLE XLA.XLA_EVENTS Cost: 1 Bytes: 16 Cardinality: 1 Partition #: 39 Partitions accessed #2
35 INDEX UNIQUE SCAN INDEX (UNIQUE) XLA.XLA_EVENTS_U1 Cost: 1 Cardinality: 1 Partition #: 40 Partitions accessed #2
41 PARTITION LIST SINGLE Cost: 1 Bytes: 15 Cardinality: 1 Partition #: 41
40 TABLE ACCESS BY LOCAL INDEX ROWID TABLE XLA.XLA_TRANSACTION_ENTITIES Cost: 1 Bytes: 15 Cardinality: 1 Partition #: 42 Partitions accessed #2
39 INDEX UNIQUE SCAN INDEX (UNIQUE) XLA.XLA_TRANSACTION_ENTITIES_U1 Cost: 1 Cardinality: 1 Partition #: 43 Partitions accessed #2
44 TABLE ACCESS BY INDEX ROWID TABLE GL.GL_CODE_COMBINATIONS Cost: 1 Bytes: 11 Cardinality: 1
43 INDEX UNIQUE SCAN INDEX (UNIQUE) GL.GL_CODE_COMBINATIONS_U1 Cost: 1 Cardinality: 1damorgan wrote:
Tuning is NOT about reducing the cost of i/o.
i/o is only one of many contributors to cost and only one of many contributors to waits.
Any time you would like to explore this further run this code:
SELECT 1 FROM dual
WHERE regexp_like(' ','^*[ ]*a');but not on a production box because you are going to experience an extreme tuning event with zero i/o.
And when I say "extreme" I mean "EXTREME!"
You've been warned.I think you just need a faster server.
SQL> set autotrace traceonly statistics
SQL> set timing on
SQL> select 1 from dual
2 where
3 regexp_like (' ','^*[ ]*a');
no rows selected
Elapsed: 00:00:00.00
Statistics
1 recursive calls
0 db block gets
0 consistent gets
0 physical reads
0 redo size
243 bytes sent via SQL*Net to client
349 bytes received via SQL*Net from client
1 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
0 rows processedRepeated from an Oracle 10.2.0.x instance:
SQL> SELECT DISTINCT SID FROM V$MYSTAT;
SID
310
SQL> ALTER SESSION SET EVENTS '10053 TRACE NAME CONTEXT FOREVER, LEVEL 1';
Session altered.
SQL> select 1 from dual
2 where
3 regexp_like (' ','^*[ ]*a');The session is hung. Wait a little while and connect to the database using a different session:
COLUMN STAT_NAME FORMAT A35 TRU
SET PAGESIZE 200
SELECT
STAT_NAME,
VALUE
FROM
V$SESS_TIME_MODEL
WHERE
SID=310;
STAT_NAME VALUE
DB time 9247
DB CPU 9247
background elapsed time 0
background cpu time 0
sequence load elapsed time 0
parse time elapsed 6374
hard parse elapsed time 5997
sql execute elapsed time 2939
connection management call elapsed 1660
failed parse elapsed time 0
failed parse (out of shared memory) 0
hard parse (sharing criteria) elaps 0
hard parse (bind mismatch) elapsed 0
PL/SQL execution elapsed time 95
inbound PL/SQL rpc elapsed time 0
PL/SQL compilation elapsed time 0
Java execution elapsed time 0
repeated bind elapsed time 48
RMAN cpu time (backup/restore) 0Seems to be using a bit of time for the hard parse (hard parse elapsed time). Wait a little while, then re-execute the query:
STAT_NAME VALUE
DB time 9247
DB CPU 9247
background elapsed time 0
background cpu time 0
sequence load elapsed time 0
parse time elapsed 6374
hard parse elapsed time 5997
sql execute elapsed time 2939
connection management call elapsed 1660
failed parse elapsed time 0
failed parse (out of shared memory) 0
hard parse (sharing criteria) elaps 0
hard parse (bind mismatch) elapsed 0
PL/SQL execution elapsed time 95
inbound PL/SQL rpc elapsed time 0
PL/SQL compilation elapsed time 0
Java execution elapsed time 0
repeated bind elapsed time 48
RMAN cpu time (backup/restore) 0The session is not reporting additional CPU usage or parse time.
Let's check one of the session's statistics:
SELECT
SS.VALUE
FROM
V$SESSTAT SS,
V$STATNAME SN
WHERE
SN.NAME='consistent gets'
AND SN.STATISTIC#=SS.STATISTIC#
AND SS.SID=310;
VALUE
163Not many consistent gets after 20+ minutes.
Let's take a look at the plan:
SQL> SELECT SQL_ID,CHILD_NUMBER FROM V$SQL WHERE SQL_TEXT LIKE 'select 1 from du
al%';
SQL_ID CHILD_NUMBER
04mpgrzhsv72w 0
SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY_CURSOR('04mpgrzhsv72w',0,'TYPICAL'))
select 1 from dual where regexp_like (' ','^*[ ]*a')
NOTE: cannot fetch plan for SQL_ID: 04mpgrzhsv72w, CHILD_NUMBER: 0
Please verify value of SQL_ID and CHILD_NUMBER;
It could also be that the plan is no longer in cursor cache (check v$sql_p
lan)No plan...
Let's take a look at the 10053 trace file:
Registered qb: SEL$1 0x19157f38 (PARSER)
signature (): qb_name=SEL$1 nbfros=1 flg=0
fro(0): flg=4 objn=258 hint_alias="DUAL"@"SEL$1"
Predicate Move-Around (PM)
PM: Considering predicate move-around in SEL$1 (#0).
PM: Checking validity of predicate move-around in SEL$1 (#0).
CBQT: Validity checks failed for 7uqx4guu04x3g.
CVM: Considering view merge in query block SEL$1 (#0)
CBQT: Validity checks failed for 7uqx4guu04x3g.
Subquery Unnest
SU: Considering subquery unnesting in query block SEL$1 (#0)
Set-Join Conversion (SJC)
SJC: Considering set-join conversion in SEL$1 (#0).
Predicate Move-Around (PM)
PM: Considering predicate move-around in SEL$1 (#0).
PM: Checking validity of predicate move-around in SEL$1 (#0).
PM: PM bypassed: Outer query contains no views.
FPD: Considering simple filter push in SEL$1 (#0)
FPD: Current where clause predicates in SEL$1 (#0) :
REGEXP_LIKE (' ','^*[ ]*a')
kkogcp: try to generate transitive predicate from check constraints for SEL$1 (#0)
predicates with check contraints: REGEXP_LIKE (' ','^*[ ]*a')
after transitive predicate generation: REGEXP_LIKE (' ','^*[ ]*a')
finally: REGEXP_LIKE (' ','^*[ ]*a')
apadrv-start: call(in-use=592, alloc=16344), compile(in-use=37448, alloc=42256)
kkoqbc-start
: call(in-use=592, alloc=16344), compile(in-use=38336, alloc=42256)
kkoqbc-subheap (create addr=000000001915C238)Looks like the query never had a chance to start executing - it is still parsing after 20 minutes.
I am not sure that this is a good example - the query either executes very fast, or never has a chance to start executing. But, it might still make your point physical I/O is not always the problem when performance problems are experienced.
Charles Hooper
IT Manager/Oracle DBA
K&M Machine-Fabricating, Inc. -
How to run the query in screen painter
i am using the patch 36 in business one so pls give information about
how to run the query in screen painter
regard
sandip adhavHope u have reached Screen painter interface,
1. Click 'Add Grid' from tool bar.
2. Go to 'Collections' tab in 'Properties' window.
3. Choose 'Data Tables' from the Drop down list.
4. Click 'New' found at the bottom of the Properties Window(same window)
5. U'll find the place to insert ur query.
6. U can rename the table name from 'DT_0'
7. Choose type as 'Query'
8. Clear content from box 'Query'
9. Enter ur query there. Dont forget to Click 'SET'
10. Go to Preview option from tool bar.
now ur query will be displayed as table format.
Note: First try with simple query b4 going for linking option.
Regards,
Dhana.
Maybe you are looking for
-
The operation could not be performed because OLE DB provider "OraOLEDB.Oracle" for linked server ...
Our setup is that we have two databases; a SQL Server 2008 database and an Oracle database (11g). I've got the oracle MTS stuff installed and the Oracle MTS Recovery Service is running. I have DTC configured to allow distributed transactions. All acc
-
For all iPad owners with video freezing concerns- read this first!
First of all, take a deep breath, acknowledge that it is not your fault, and there is nothing you can do with the software to fix it. It is a hardware problem, most likely video chip related, that is ONLY solved with replacement. I have had several d
-
HT4623 how to back up data in iphone4s to pc
I need your know how to back up my files in Iphone to my notebook. Thank you.
-
Hi, Is there a way to view a form (example job salary change form) in xml format in SWi1 or in any other transaction. Basically we would like to view the contents of the form like action, reason for action, old value, new values effective date...to r
-
Setting filenames for images sequences via scripting
Is there a good way to set the output filename for a sequence via scriping? When I explicitly set the filename and render location, the frame number is being appended to the end of the extension. (example: "filename.png002").