How to compare two internal table and store value in third table

Dear All,
              There is two tabel say I_T1 & T2, in I_T1 there are 4 rows , in T2 there are multiple rows against the same field. Say there is a filed X common in both table .
Value of I_T1-X are
10
20
50
90
and value ot T2-X are
10
15
20
30
40
50
.100
Now i want to fetch data form T2 against the common field of I_T1-X and store into other internal table.
Plz suggest me the proper way of doing this.
Rewards points assured for proper answer.
Regards,
Gulrez Alam

hi this is like your requirement.
in this i am storing the values into the final table
REPORT  ZZZZ000000.
tables:mara,marc,mard,makt.
data:begin of it_mara occurs 0,
     matnr like mara-matnr,
     mtart like mara-mtart,
     meins like mara-meins,
     end of it_mara.
data:begin of it_marc occurs 0,
     matnr like marc-matnr,
     pstat like marc-pstat,
     werks like marc-werks,
     end of it_marc.
data:begin of it_mard occurs 0,
     werks like mard-werks,
     lgort like mard-lgort,
     labst like mard-labst,
     end of it_mard.
data:begin of it_final occurs 0,
     matnr like mara-matnr,
     mtart like mara-mtart,
     meins like mara-meins,
     pstat like marc-pstat,
     werks like marc-werks,
     lgort like mard-lgort,
     labst like mard-labst,
     maktx like makt-maktx,
     end of it_final.
select-options:s_matnr for mara-matnr.
select  matnr
        mtart
        meins
        from mara
        into table it_mara
        where matnr in s_matnr.
        if not it_mara[] is initial.
        select matnr
               pstat
               werks
               from marc
               into table it_marc
               for all entries in it_mara
               where matnr = it_mara-matnr.
               if not it_marc[] is initial.
               select werks
                      lgort
                      labst
                      from mard
                      into table it_mard
                      for all entries in it_marc
                      where werks = it_marc-werks.
               endif.
      endif.
loop at it_mara.
it_final-matnr = it_mara-matnr.
it_final-mtart = it_mara-mtart.
it_final-meins = it_mara-meins.
read table it_marc with key matnr = it_mara-matnr.
it_final-werks = it_marc-werks.
it_final-pstat = it_marc-pstat.
read table it_mard with key werks = it_marc-werks.
it_final-lgort = it_mard-lgort.
it_final-labst = it_mard-labst.
if sy-subrc = 0.
select maktx from makt into it_final-maktx where matnr = it_final-matnr.
endselect.
endif.
append it_final.
endloop.
loop at it_final.
write:/ it_final-matnr under 'material',
        it_final-mtart under 'material type',
        it_final-meins under 'unit of measure',
        it_final-werks under 'plant' ,
        it_final-pstat under 'status',
        it_final-lgort under 'storage loc',
        it_final-labst under 'stock',
        it_final-maktx.
endloop.
reward points if useful,
venkat.

Similar Messages

  • How to read .html file and store values into oracle table  from html file

    Hi all ,
    How to read .html file and store values into oracle table from html file using pl/sql
    Please Help.....

    Hi,
    Kindly find following sample html code ,i want to store every value in different column in database .
    <html><body><p/>
    <div style="position:absolute;top:47px;left:37px;font-family:'Times New Roman';font-size:10pt;white-space:nowrap;"> 
    </div>
    <div style="position:absolute;top:47px;left:680px;font-family:'Times New Roman';font-size:10pt;white-space:nowrap;">  
    </div>
    <div style="position:absolute;top:94px;left:151px;font-family:'Times New Roman';font-size:1pt;white-space:nowrap;"> 
    </div>
    <div style="position:absolute;top:1080px;left:115px;font-family:'Times New Roman';font-size:8pt;white-space:nowrap;">4497743
    </div>
    <div style="position:absolute;top:1079px;left:442px;font-family:'Times New Roman';font-size:9pt;white-space:nowrap;"> Miclyn Express Offshore Pre-Quotation Disclosure
    </div>
    <div style="position:absolute;top:1079px;left:680px;font-family:'Times New Roman';font-size:9pt;white-space:nowrap;"> 
    </div>
    <div style="position:absolute;top:1079px;left:723px;font-family:'Times New Roman';font-size:9pt;white-space:nowrap;">page 5
    </div>
    <div style="position:absolute;top:1083px;left:151px;font-family:'Times New Roman';font-size:1pt;white-space:nowrap;"> 
    </div>
    <div style="position:absolute;top:107px;left:151px;font-family:'Times New Roman';font-size:10pt;white-space:nowrap;"><b>Attachment 2 ¿ indicative statement of 20 largest shareholders </b>
    </div>
    <div style="position:absolute;top:139px;left:262px;font-family:'Times New Roman';font-size:10pt;white-space:nowrap;"><b>Name </b>
    </div>
    <div style="position:absolute;top:131px;left:415px;font-family:'Times New Roman';font-size:10pt;white-space:nowrap;"><b>Number of Shares </b>
    </div>
    <div style="position:absolute;top:147px;left:458px;font-family:'Times New Roman';font-size:10pt;white-space:nowrap;"><b>Held </b>
    </div>
    <div style="position:absolute;top:131px;left:560px;font-family:'Times New Roman';font-size:10pt;white-space:nowrap;"><b>Percentage of </b>
    </div>
    <div style="position:absolute;top:147px;left:567px;font-family:'Times New Roman';font-size:10pt;white-space:nowrap;"><b>shares held </b>
    </div>
    <div style="position:absolute;top:179px;left:161px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">Macquarie Capital Group Limited 92,378,000
    </div>
    <div style="position:absolute;top:179px;left:531px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;"> 
    </div>
    <div style="position:absolute;top:179px;left:618px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">34.00%r
    </div>
    <div style="position:absolute;top:179px;left:663px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;"> 
    </div>
    <div style="position:absolute;top:212px;left:161px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">HSBC Custody Nominees (Australia)
    </div>
    <div style="position:absolute;top:227px;left:161px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">Limited
    </div>
    <div style="position:absolute;top:220px;left:464px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">36,458,220
    </div>
    <div style="position:absolute;top:220px;left:531px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;"> 
    </div>
    <div style="position:absolute;top:220px;left:618px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">13.42%
    </div>
    <div style="position:absolute;top:220px;left:663px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;"> 
    </div>
    <div style="position:absolute;top:260px;left:161px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">Ray Rider Limited 27,170,000
    </div>
    <div style="position:absolute;top:260px;left:531px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;"> 
    </div>
    <div style="position:absolute;top:260px;left:618px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">10.00%
    </div>
    <div style="position:absolute;top:260px;left:663px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;"> 
    </div>
    <div style="position:absolute;top:300px;left:531px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;"> 
    </div>
    <div style="position:absolute;top:300px;left:625px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">7.96%
    </div>
    <div style="position:absolute;top:300px;left:663px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;"> 
    </div>
    <div style="position:absolute;top:333px;left:161px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">National Australia Bank Custodian
    </div>
    <div style="position:absolute;top:348px;left:161px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">Services
    </div>
    <div style="position:absolute;top:341px;left:464px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">12,866,550
    </div>
    <div style="position:absolute;top:341px;left:531px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;"> 
    </div>
    <div style="position:absolute;top:341px;left:625px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">4.74%
    </div>
    <div style="position:absolute;top:341px;left:663px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;"> 
    </div>
    <div style="position:absolute;top:381px;left:161px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">Citigroup Nominees Pty Ltd 6,942,541
    </div>
    <div style="position:absolute;top:381px;left:531px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;"> 
    </div>
    <div style="position:absolute;top:381px;left:625px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">2.56%r
    </div>
    <div style="position:absolute;top:381px;left:663px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;"> 
    </div>
    <div style="position:absolute;top:421px;left:531px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;"> 
    </div>
    <div style="position:absolute;top:421px;left:625px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">2.14%r
    </div>
    <div style="position:absolute;top:421px;left:663px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;"> 
    </div>
    <div style="position:absolute;top:462px;left:161px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">UBS Securities Australia Ltd 4,806,760
    </div>
    <div style="position:absolute;top:462px;left:531px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;"> 
    </div>
    <div style="position:absolute;top:462px;left:625px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">1.77%
    </div>
    <div style="position:absolute;top:462px;left:663px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;"> 
    </div>
    <div style="position:absolute;top:494px;left:161px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">Merrill Lynch Equities (Australia)
    </div>
    <div style="position:absolute;top:510px;left:161px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">Limited
    </div>
    <div style="position:absolute;top:502px;left:472px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">4,325,000
    </div>
    <div style="position:absolute;top:502px;left:531px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;"> 
    </div>
    <div style="position:absolute;top:502px;left:625px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">1.59%
    </div>
    <div style="position:absolute;top:502px;left:663px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;"> 
    </div>
    <div style="position:absolute;top:550px;left:161px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">Equities Ltd
    </div>
    <div style="position:absolute;top:542px;left:472px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">4,150,000
    </div>
    <div style="position:absolute;top:542px;left:531px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;"> 
    </div>
    <div style="position:absolute;top:542px;left:625px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">1.53%
    </div>
    <div style="position:absolute;top:542px;left:663px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;"> 
    </div>
    <div style="position:absolute;top:575px;left:161px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">Bond Street Custodians Limited - A/C
    </div>
    <div style="position:absolute;top:590px;left:161px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">Institutional
    </div>
    <div style="position:absolute;top:583px;left:472px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">2,750,000
    </div>
    <div style="position:absolute;top:583px;left:531px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;"> 
    </div>
    <div style="position:absolute;top:583px;left:625px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">1.01%
    </div>
    <div style="position:absolute;top:583px;left:663px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;"> 
    </div>
    <div style="position:absolute;top:623px;left:161px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">Cogent Investment Operations Pty Ltd 2,599,321
    </div>
    <div style="position:absolute;top:623px;left:531px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;"> 
    </div>
    <div style="position:absolute;top:623px;left:625px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">0.96%
    </div>
    <div style="position:absolute;top:623px;left:663px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;"> 
    </div>
    <div style="position:absolute;top:663px;left:161px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">Skeet Nominees Pty Ltd 2,276,736
    </div>
    <div style="position:absolute;top:663px;left:531px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;"> 
    </div>
    <div style="position:absolute;top:663px;left:625px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">0.84%
    </div>
    <div style="position:absolute;top:663px;left:663px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;"> 
    </div>
    <div style="position:absolute;top:704px;left:161px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">Diederik de Boer 1,917,561
    </div>
    <div style="position:absolute;top:704px;left:531px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;"> 
    </div>
    <div style="position:absolute;top:704px;left:625px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">0.71%
    </div>
    <div style="position:absolute;top:704px;left:663px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;"> 
    </div>
    <div style="position:absolute;top:744px;left:161px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">Ecapital Nominees Pty Limited 1,594,736
    </div>
    <div style="position:absolute;top:744px;left:531px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;"> 
    </div>
    <div style="position:absolute;top:744px;left:625px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">0.59%
    </div>
    <div style="position:absolute;top:744px;left:663px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;"> 
    </div>
    <div style="position:absolute;top:777px;left:161px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">Neweconomy Com Au Nominees Pty 9
    </div>
    <div style="position:absolute;top:792px;left:161px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">Limited &#60;900 Account&#62;
    </div>
    <div style="position:absolute;top:784px;left:472px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">1,594,7360
    </div>
    <div style="position:absolute;top:784px;left:531px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;"> 
    </div>
    <div style="position:absolute;top:784px;left:625px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">0.59%
    </div>
    <div style="position:absolute;top:784px;left:663px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;"> 
    </div>
    <div style="position:absolute;top:825px;left:161px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">Sonray Capital Markets Pty Ltd 1,236,842
    </div>
    <div style="position:absolute;top:825px;left:531px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;"> 
    </div>
    <div style="position:absolute;top:825px;left:625px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">0.46%
    </div>
    <div style="position:absolute;top:825px;left:663px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;"> 
    </div>
    <div style="position:absolute;top:865px;left:161px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">Argo Investments Limited 1,050,000
    </div>
    <div style="position:absolute;top:865px;left:531px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;"> 
    </div>
    <div style="position:absolute;top:865px;left:625px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">0.39%
    </div>
    <div style="position:absolute;top:865px;left:663px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;"> 
    </div>
    <div style="position:absolute;top:905px;left:161px;font-family:'Times New Roman';font-size:11pt;white-space:nowrap;">Idameno (No 79) Nominees Pty Limited 724,210</div>
    <div style="position:absolute;top:1103px;">
    </body></html>
    Thanks..........................

  • How to compare two excel reports and find the difference in BI Publisher

    Hi All,
    I have a requirement that needs to compare two excel reports in XML Publisher 5.6.2. or BI publisher 10.1.3.4
    If anybody has an idea about this pls help us.
    Thanks,

    Since our customer wants to have this comparison only with BI reports....here is the scenario how the comparison should be..
    Now,we have a parameters called Customer name and version id. Version id list will be refreshed based on the customer selection.
    User can generate the report based on the selected customer name and version id. These data are fetch from the oracle database and we are using Data Template in the BI Publisher.
    Now the requirement is customer wants to compare two version id data. for example, v1.2 and v1.3
    Now they wanna to see both the reports while generating in the same work sheet, like, v1.2report should display in the left side and the v1.3report has to display in the right hand side of the same work sheet.
    Now...If there is any addition happened in v1.3 report,then that cell/data should display as a green color in that report.
    If any deletion happened in v1.3report then that should be in the red color.
    If any modification happened in v1.3 then that should be in the yellow color.
    If there is no difference then that should display as it is.
    the thing is that, the both the reports (v1.2 and v1.3)should display side by side in the same worksheet with the format and everything........only the difference should be highlighted.
    Template is same for both the reports..
    To display the data for both versions i think i can generate the template side by side of both in the same worksheet.
    Now, My question is how to find the difference of data in the RTF Template for both the versions
    Can anybody assist me?
    Thanks,
    Edited by: user753355 on Jun 9, 2009 12:03 AM
    Edited by: user753355 on Jun 9, 2009 12:06 AM
    Edited by: user753355 on Jun 9, 2009 12:16 AM
    Edited by: user753355 on Jun 10, 2009 3:59 AM

  • How to make validation in Bean and select value from another table

    I want to know how to select data from table in backing bean according to primary key i have
    the problem is that
    i have a table Employee_Salary contains Employee ids and their salary
    Empoloyee_Salary table
         Employee_ID      Number
         Employee_salary Number
    And Another table Called Employees
    Employees table
         Employee_ID     Number
         IsManager Varchar2 its value is [*Yes or NO*]
    and other columns that i don't care about this table
    i have on a jsff page an <af:table> this table is editable this is the Empoloyee_Salary table
    *i want to check before save or after insert if this employee is Manager [from Employees tabke(yes or no)] the salary*
    cannot be less that 100
    i want to know how to make this how to select the value from employees table according to the id i have in the employee_salary table how to make this and make this validation
    i have to select IsManager from Employees Table to see if this manager or no
    i want to know how to make this in a bean
    i use jdeveloper 11g
    and my project is ADF Fusion project
    and the page that have the Emplpyee_Salary table is JSFF
    thanks in advance

    You might want to write this code in a validator on the entity object if it should apply from every screen.
    If you want to access view objects from a backing bean the basics are here: http://download.oracle.com/docs/cd/E15523_01/web.1111/b31974/bcservices.htm#sthref918

  • How to Create Pop up window and assign values to the table in it

    Hi All,
      I have a code which checks for duplicate value in the database and displays that duplicate record. I want to put the duplicate record value in a table of a popup window. Can you please tell me how do i acheive this?
    I tried the below code for creating a popup but most of the methods used here are deprecated. Please help
    IWDWindowInfo windowInfo =(IWDWindowInfo) wdComponentAPI.getComponentInfo().findInWindows(
    "MyWindowName");
    // create the Window
    IWDWindow window = wdComponentAPI.getWindowManager().createWindow(windowInfo, true);
    window.setWindowPosition(WDWindowPos.CENTER);
    window.setTitle("WindowTitle");
    // Save WindowInstance in Context
    wdContext.currentContextElement.setWindowInstance(window);
    // and show the window
    window.open();
    Regards
    Suresh

    Hi Suresh,
    "createModalWindow" is not a depricated method.
    Check this code.
    IWDWindowInfo windowInfo =(IWDWindowInfo) wdComponentAPI.getComponentInfo().findInWindows(
              "SalesAreaWindow");
    //             create the Window
              IWDWindow window = wdComponentAPI.getWindowManager().createModalWindow(windowInfo);
              window.setWindowPosition(WDWindowPos.CENTER);
              window.setTitle("Sales Window");
              window.setWindowSize(100,100);
    //             Save WindowInstance in Context
              wdContext.currentContextElement().setWindowInstance(window);
    //             and show the window
              window.show();
    "WindowInstance" is the context attribute of type "com.sap.tc.webdynpro.services.session.api.IWDWindow"
    Re: opening a new window on lead select in a table!!!
    Regards,
    Mithu

  • Table to store values from af:table

    hi ,
    i have a requirement where in a customer enters data row by row. it is desired that the data should get stored in the database not row by row but only after the client has finished filling all the rows. once the client has pressed the commit or save button, all the rows must get disabled.He or she should not be further able to modify the order details. Could you please suggest a way?
    and one more question
    can we create a temporary table(or either buffer) which holds the values of another table.so that once the table is committed, the values will go to this temporary table and then go to database.

    Hi,
    if you use ADF Business Components then this is handled for you automatically. The only remaining thing to do is
    once the client has pressed the commit or save button, all the rows must get disabled
    In this case set a EL expression on the readOnly property of the input text field and e.g. check if the primary key field is populated (in this case you return true). The EL can check e.g. #{row.pkAttr.inputValue != null}
    Frank

  • How to retrieve the specific string and store in a seperate table

    hi all,
    i have the following long text store in a internal table field.
    "AAA1"
    "AAA1"*********************************************
    "AAA1"INSTRUCTIONS FOR STAGING TO PRINT PANEL LABEL
    "AAA1"*********************************************
    "AAA1" STAGING TO PRINT THE PANEL LABELS
    "BBB1" (REQUIRED QTY. AS PER LOT TRVELER)
    "BBB1" PANEL LABEL MUST BE A THERMAL LABEL
    "CCC1" USING FOLLOWING SPECIFICATIONS:
    "CCC1" *USE LABEL SIZE:1.25"X0.25"
    "AAA1" *USE ZEBRA PRINTER(MODEL:90XI 11)
    "BBB1" *USE FILE NAME:L:\BARONE\FORMATS\PANEL.lbl
    "AAA1" Staging to apply labels on
    "CCC1" breakaway tab of the panel
    please advise the logic to retrieve only the "xxxx" field for this long text field so that i can store it in a separte field/table. we can do a sorting on the fields accordingly later.
    the " " actually is open and close bracket in the system, i'm not able to get it display in the post here.
    thanks.
    Edited by: Reetha Pitchee Maridas on Jul 15, 2009 10:27 AM
    Edited by: Reetha Pitchee Maridas on Jul 15, 2009 10:28 AM

    Hi ,
    Try using logical expression CA .
    Below is a sample code
    data :index1 type sy-fdpos ,
          g_f_text type char255 ,
          g_f_text2 type char255,
          index2 type sy-fdpos .
    g_f_text = '(AAA1)INSTRUCTIONS FOR STAGING TO PRINT PANEL LABEL'.
    if g_f_text CA '('.
       index1 = sy-fdpos .
    endif.
      if g_f_text CA ')'.
       index2 = sy-fdpos .
    endif.
    index2 = index2 - index1 - 1.
    index1 = index1 + 1 .
    g_f_text2 = g_f_text+index1(index2).
    write g_f_text2.
    Please note that this is with the assumption that we need to take the first string enclosed in ( ).
    Regards,
    Arun

  • How to Compare 2 CSV file and store the result to 3rd csv file using PowerShell script?

    I want to do the below task using powershell script only.
    I have 2 csv files and I want to compare those two files and I want to store the comparision result to 3rd csv file. Please look at the follwingsnap:
    This image is csv file only. 
    Could you please any one help me.
    Thanks in advance.
    By
    A Path finder 
    JoSwa
    If a post answers your question, please click &quot;Mark As Answer&quot; on that post and &quot;Mark as Helpful&quot;
    Best Online Journal

    Not certain this is what you're after, but this :
    #import the contents of both csv files
    $dbexcel=import-csv c:\dbexcel.csv
    $liveexcel=import-csv C:\liveexcel.csv
    #prepare the output csv and create the headers
    $outputexcel="c:\outputexcel.csv"
    $outputline="Name,Connection Status,Version,DbExcel,LiveExcel"
    $outputline | out-file $outputexcel
    #Loop through each record based on the number of records (assuming equal number in both files)
    for ($i=0; $i -le $dbexcel.Length-1;$i++)
    # Assign the yes / null values to equal the word equivalent
    if ($dbexcel.isavail[$i] -eq "yes") {$dbavail="Available"} else {$dbavail="Unavailable"}
    if ($liveexcel.isavail[$i] -eq "yes") {$liveavail="Available"} else {$liveavail="Unavailable"}
    #create the live of csv content from the two input csv files
    $outputline=$dbexcel.name[$i] + "," + $liveexcel.'connection status'[$i] + "," + $dbexcel.version[$i] + "," + $dbavail + "," + $liveavail
    #output that line to the csv file
    $outputline | out-file $outputexcel -Append
    should do what you're looking for, or give you enough to edit it to your exact need.
    I've assumed that the dbexcel.csv and liveexcel.csv files live in the root of c:\ for this, that they include the header information, and that the outputexcel.csv file will be saved to the same place (including headers).

  • How to get the incoming filename and store it to sql table using biztalk server 2013

    HI,
    1)I need to get the incoming EDI filename which is received and save the filename in to the database.
    2)How can i get the EDI Duplicate filename if i set the do not allow duplicate under validation tab in X12 agreement settings in biztalk admin console. In this case since the duplicate file will not come in to orchestration. In this case how
    can i acheive this.
    Thanks,
    Vijayan
    vijayan

    For both cases, the filename can be found on the FILE.ReceivedFileName Context Property.  You can access this Property in a Pipeline Component or Orchestration and take any action you want, such as apply to a database.
    The value is accessed by: MyReceivedMessage(FILE.ReceivedFileName)
    In the case of a duplicate EDI Interchange, you would use the Failed Message Routing feature to capture the error message with either an Orchestration or Send Port.

  • Insert direct column from database table and function value into a table

    Hi All,
    Please resolve this query for me....
    Suppose my select query is like this
    Select empno from EMP; (simple select)
    Select fun_dept(empno) from dual;(function)
    i want both the output of the select query to be written into a table like this....
    Suppose out of the First Select query is ..... 45009
    Output for the Second Query is...................ECE
    i want to insert this output into a table...like
    something like this
    XX:
    Empno Dept
    45009 ECE
    how to do this..??
    Thanks in Advance,
    Regards,
    Gita

    My exact query is like this.
    create or replace function fun_sal(v_rno number,v_year number,v_period number)
    return number as
    cursor s is
    select salary from emp where eno=v_rno and eyear=v_year and eperiod=v_period;
    begin
    open s;
    loop
    exit when s%notfound;
    fetch s into v_sal;
    if v_sal<1000 then
    sal:=v_sal*1555;
    else
    sal:=0;
    return sal;
    end if;
    end loop;
    close s;
    end;
    create or replace procedure pro_act(v_rno number,v_year number,v_period number) as
    v_eno number(10);
    v_ename varchar2(10);
    cursor c is
    select eno,ename from emp where eno=v_rno and eyear=v_year and eperiod=v_period;
    begin
    open c;
    loop
    exit when c%notfound;
    fetch c into v_eno,v_ename;
    insert into master(empno,empname,rev_salary)values(v_eno,v_ename,"*****function fun_sal value has to come here*******");
    commit;
    end loop;
    close c;
    end;
    how to do....

  • Compare two .txt files and show result

    HI
    Could anybody show me how to compare two text files and show the result.
    i.e.
    textfile1.txt
    harry.denmark
    karry.sweden
    textfile2.txt
    harry.denmark
    karry.sweden
    marry.usa
    Compare
    result=
    marry.usa
    The text files I want to compare are how ever much larger than this example. (up to 2-3.000 words)
    anybody ??
    Sincerly
    Peder

    HI & thanks for reply
    I know almost nothing about java so could you or anybody please show me the code to do this? Or is it perhaps too large or difficult a code?
    I know how to compile a .java file and run it in prompt :-) and thats about it (almost)
    I offcourse understand if its too much to ask for :-)

  • To compare two internal tables and delete records

    Hi friends,
        I have to compare two internal tables and should delete the records which is not present in both the tables. Reply me as soon as possible.
    Thanks.

    Hi Nagarajan,
    1. I don't think there is any direct (one-shot statement)
        way to achieve this.
        one has to do by writing some logic.
    2. Loop at ITAB1.
         Read table ITAB2 with key Field1 = ITAB1-Field1.
         If sy-subrc <> 0.
         delete ITAB1.
         endif.
       Endloop.
      Do the same again with ITAB2.
       Loop at ITAB2.
         Read table ITAB1 with key Field1 = ITAB2-Field1.
         If sy-subrc <> 0.
         delete ITAB2.
         endif.
       Endloop.
    3. If any better way is found, i will let u know.
    Hope it helps.
    Regards,
    Amit M.

  • How to execute unix command through odi and store the result in table

    I have to reconcile  if data is loaded in table from csv file or not . I have to create a oracle data integrator package/interface/procedure to execute unix command to count number of rows in the csv files and store the count result in a table then i have to query the loaded table and count number of rows there and store in the table and have to compare is counts are same or not,  Please assist me how to make package/interface/procedure to  execute unix command and store result in oracle table.
    Thanks in Advance

    Use ODI OS command tool in the ODI package.
    create an interface in ODI using LKM File to Sql and the output file generated with the csv file's row count as a source and the db table(where the count needs to be stored) as a target

  • Comparing two internal tables

    HI all!
    I have two internal tables with single field values as below :
    1st Internal Table : A,B,C,D
    2nd Internal Table : A,B,C,D,E,F,G,
    Now I want to compare these two Int. tables and delete the second int. table with values which are not there in the first int. table.Any simple logic to get this.
    Regards
    Pavan

    Sort internal table 1 by A B C D.
    Now ..
    copy contents of 2nd table to a temp table.
    loop at 2nd internal table.
    read 1st internal table with key a = 2internal table a
                                     b = 2internal table b
    c = 2internal table c
    d = 2internal table d.
    if sy-subrc ne 0.
    delete entry from temp table.
    now refresh table 2.
    copy contents of temp to table 2.
    Guys,
         I guess DELETING THE SAME TABLE WITHIN A LOOP .. ENDLOOP is not advisable.Please correct me if i m wrong.
    endif.
    endloop.
    Message was edited by: Nishanth Bhandar
    Message was edited by: Nishanth Bhandar

  • How to join two internal table rows in alternative manner into one internal table?

    How to join two internal table rows in alternative manner into one internal table?
    two internal tables are suppose itab1 &  itab2 & its data
    Header 1
    Header 2
    Header 3
    a
    b
    c
    d
    e
    f
    g
    h
    i
    Header 1
    Header 2
    Header 3
    1
    2
    3
    4
    5
    6
    7
    8
    9
    INTO itab3 data
    Header 1
    Header 2
    Header 3
    a
    b
    c
    1
    2
    3
    d
    e
    f
    4
    5
    6
    g
    h
    i
    7
    8
    9

    Hi Soubhik,
    I have added two additional columns for each internal table.
    Table_Count - It represents the Internal Table Number(ITAB1 -> 1, ITAB2 -> 2)
    Row_Count  - It represents the Row Count Number, increase the row count value 1 by one..
    ITAB1:
    Header 1
    Header 2
    Header 3
    Table_Count
    Row_Count
    a
    b
    c
    1
    1
    d
    e
    f
    1
    2
    g
    h
    i
    1
    3
    ITAB2:
    Header 1
    Header 2
    Header 3
    Table_Count
    Row_Count
    1
    2
    3
    2
    1
    4
    5
    6
    2
    2
    7
    8
    9
    2
    3
    Create the Final Internal table as same as the ITAB1/ITAB2 structure.
    "Data Declarations
    DATA: IT_FINAL LIKE TABLE OF ITAB1.          "Final Internal Table
    FIELD-SYMBOLS: <FS_TAB1> TYPE TY_TAB1,     "TAB1
                                   <FS_TAB2> TYPE TY_TAB2.     "TAB2
    "Assign the values for the additional two column for ITAB1
    LOOP AT ITAB1 ASSIGNING <FS_TAB1>.
         <FS_TAB1>-TABLE_COUNT = 1.             "Table value same for all row
         <FS_TAB1>-ROW_COUNT = SY-TABIX. "Index value
    ENDLOOP.
    "Assign the values for the additional two column for ITAB2
    LOOP AT ITAB2 ASSIGNING <FS_TAB2>.    
         <FS_TAB2>-TABLE_COUNT = 2.                  "Table value same for all row
         <FS_TAB2>-ROW_COUNT = SY-TABIX.      "Index value
    ENDLOOP.
    "Copy the First Internal Table 'ITAB1' to Final Table
    IT_FINAL[] = ITAB1[].
    "Copy the Second Internal Table 'ITAB2' to Final Table
    APPEND IT
    LOOP AT ITAB2 INTO WA_TAB2.
    APPEND WA_TAB2 TO IT_FINAL.
    ENDLOOP.
    "Sort the Internal Table based on TABLE_COUNT & ROW_COUNT
    SORT IT_FINAL BY  ROW_COUNT TABLE_COUNT.
    After sorting, check the output for IT_FINAL Table, you can find the required output as shown above.
    Regards
    Rajkumar Narasimman

Maybe you are looking for

  • How to Open Find/Change with menuAction

    Hi, Read the question carefully I'm asking how to open the Find/Change dialog, not how to toggle it. Toggling is easy enough: app.menuActions.itemByName("$ID/Find/Change...").invoke(); But if it is open, this will close it, and vice versa. I'm wonder

  • [Solved] Several problems after big update

    Hello. Yesterday i made a pacman -Syu that upgraded many packages, after rebooting, i found out that many things got broken, like the keyboard, that got a strange keymap and i can't change it, at least not by the regular ways. Chromium doesn't start,

  • HT2736 Gifting songs in iTunes not working

    I'm following the instructions behind the link below but nothing happens when I click "Gift this item"... http://support.apple.com/kb/ht2736

  • How to match edges of objects precisely?

    Hi all Okay, I have two objects, A and B, both with very irregular, jagged, edges. They should be contiguous and I want the edges to match exactly point for point, so when the border of A goes out, the border of B goes in. A is to the left of B, and

  • Shrinking images

    I am having problem with pages that I am looking at "shrinking" as I move my cursor across it. What can I do. I can even shut down and restart and when I open the page again, it is still microscopic.