How to compile KVM in a linux with a arm processor

Helow my uneversity bought a IMXL card with linux, the processor of this card is one of the arm porcessors family, i need to know how can i compile the kvm for construct aplications in this embedded system, do i need to download the kvm sources from another location?, please help me.

Hi!
Try out this:
f60gen forname user/password
f60gen myform.fmb scott/tiger
c u

Similar Messages

How to compile forms 6i in Linux

Hi Friends,
In windows I just open a form buider gui and click compile.
how do I compile forms in linux?
Thanks a lot

hi
try the following command.
@ECHO OFF
cls
Echo compiling libraries 10g ....
for %%f IN (*.pll) do frmcmp.sh userid=User_name/pass@orcl module=%%f batch=yes module_type=library compile_all=yes window_state=minimize
ECHO libraries compilation complete
ECHO ----------------------------------
Echo compiling menus 10g ....
for %%f IN (*.mmb) do frmcmp.sh userid=User_name/pass@orcl module=%%f batch=yes module_type=menu compile_all=yes window_state=minimize
ECHO menus compilation complete
ECHO ----------------------------------
Echo compiling forms 10g ....
for %%f IN (*.fmb) do frmcmp.sh userid=User_name/pass@orcl module=%%f batch=yes module_type=form compile_all=yes window_state=minimize
ECHO form compilation complete
ECHO ----------------------------------
ECHO Form Compilation completei hope it will help u.
sarah

Java 1.4.2 in Linux with a 2 processor Server

We want to install Linux Enterprise ES 3.0 into a 2-processor Server PC.
We are going to use this Server as an Oracle Application Server with
the above software installed.
Is there any problems-conflicts with
1. java_1.4.2
2. Linux ES 3.0
3. Oracle Application Server 9.0.4 Enterprise Edition ?
I only ask because i read of some Linux kernel problems with java 1.4.2
and Servers with 2 processors.
Regards,
John,
Greece

How is the 2 cpu system performing? Do you see any problems?
We use more or less the same config but we have slow network io performance.
As we have 2 exact the same machines I switched one of them to Fedora Core 1 kernel 2.4.22
the system regularly freezes ...then switched to fedora core 2 final (kernel 2.6.5) using java 1.4.2_04 and _05.
Everything freezes after some time starting up a jvm. The only thing that still works is responding to pings.
How is your network I/O performance?

How to access LPC 2368(NXP) board with Labview arm

I have Lpc 2368(NXP) customize board. I want to access the board usng Labview. I have done this using Keil but not able to do this with Labview. There are lots of tutorial for lpc2138 but I am not able to find out for LPC 2368.

Hi Kolakanuru,
Thanks for using our discussion forums. How you connect your limit switches depends on what type of motion board you are using. For example, if you look at the connection diagram for a PCI-7344, you can see that Forward Limit switches connect to pins 39, 45, 51, and 57. These will then pin out directly to the UMI. For the connection diagram for your particular motion control board, you can go to www.ni.com/manuals and pull up the necessary information. In regards to reading this in LabVIEW, the first thing you will want to check out is Measurement and Automation Explorer. In the interactive windows for your board, you can check the limit switch status there- Press your limit switch on and off and make sure that it changes the LED in MAX. Once that i
s all set, then you can go into LabVIEW and use the "Read Limit Status" VI which you can find in Functions>>All Functions>>NI Measurements>>Motion>>FlexMotion>>Motion I/O palette. Good luck with your application.
Regards
Dan
National Instruments

How to compile external procedure for Linxu

Hello to all.
I'm not able to find how to compile external procedure on Linux.
I have 64bit release Linux (I don't know if I need special 64bit library or not).
I found only something like that:
gcc -fPIC -shared -o comsh64.so comsh64.c
Listener are correctly configured.
Library is in Oracle bin directory.
If I run select externproc from dual ... I don't receive any error message but program don't work.
I think that there is some missing parameter in gcc or some small thing ?
Thank you for possible answeer
Filip

Do you have someone any idea?
Now I have 1 library, 2 functions and 1 package with 2 functions:
int renamefile(char source, char destination)
{ int result;
result=rename(source,destination);
return result;
int comexi (char *c)
{ int ret;
ret = system(c);
return ret;
FUNCTION callSystemI(c in varchar2) RETURN binary_integer is
EXTERNAL LIBRARY extern_utils
NAME "comexi"
LANGUAGE C
PARAMETERS (c string);
function renamefile (src IN varchar2, dst IN varchar2) return binary_integer
AS EXTERNAL
NAME "renamefile"
LIBRARY extern_utils
LANGUAGE C
PARAMETERS (src string, dst string);
The first function still don't works, second function works.
Why?

How to compile forms in a UNIX CLI?

Can anybody tell me how to compila a form in UNIX with Oracle 6 or 6i?
I know I have to use the 'f60gen' or 'f60genm' commands, but I don't know witch arguments I have to use.
Thanks in advance,
Pablo.

Hi!
Try out this:
f60gen forname user/password
f60gen myform.fmb scott/tiger
c u

How to compile packages

hi,
i have a package structure
root
xml
xmltest.java
xmlans.java
tts
ttstxt.java
ttsans.java
ui
uitxt.java
uians.java
sampletest.java
how to compile all the above packages with a single javac.
javac -d ????

hi,
i have a package structure
root
xml
xmltest.java
xmlans.java
tts
ttstxt.java
ttsans.java
ui
uitxt.java
uians.java
ampletest.java
how to compile all the above packages with a single
javac.
javac -d ????It's not quite enough (or at least the right) information. Are you saying that you have classes xmltest and xmlans in package xml? And ttstxt and ttsans in package tts? And uitxt and uians in package tts? and sampletest in which package?
Java coding conventions say that class names should start with capitalized letters. Following conventions will make getting help easier.

How to compile Oracle Linux source?

I accidentally downloaded source DVD "Oracle Linux Release 5 Update 2 source - DVD" instead of installable ISO image. Is there anyway I can compile it to make bootable ISO image?
I tried to search this forum as well as other places but couldn't find any information hence thought of opening a thread before I proceed to download correct file which will again take 10+ hrs with my Internet speed :(
Any help is highly appreciated. Also I need to know which packages are required to be installed for compiling the source if at all that is possible. I am using Ubuntu 11.10 Desktop.
Thanks in advance for any help and hope to get a reply soon :) I need to urgently install Oracle 11gR2 on it.
Edited by: user6582219 on Apr 12, 2012 1:10 AM
While browsing the forum for any possible solution I came to a thread that discuss installation of a package oracle-rdbms-server-11gR2-preinstall. When searched through search engine I came to know about recent certification Oracle 11gR2 on Oracle Linux 6, here is the link https://blogs.oracle.com/linux/entry/announcing_oracle_database_11g_r2
https://blogs.oracle.com/linux/entry/announcing_oracle_database_11g_r2
Thing is I already have Oracle Linux 6 Update 2 (the latest) installed on my machine in dual boot mode so I dropped the idea of installing version 5.2. As per the documentation 11gR2 was not certified earlier on Linux 6.2 so I thought of installing 5.2 but it is not necessary now.
I would still appreciate if someone could answer my question just for knowing the procedure compiling source. May be it can help someone else trying to achieve this.
I have another couple of important questions and need guidance from the experts over here. I am not sure if it is appropriate to open a new thread but for now I am posting them here.
Before proceeding here are my environment details:
Machine: x86 32 bit with 2 GB RAM/250 GB HD.
OS: Kubuntu 11.10 Desktop and Oracle Linux 6 Update 2 in dual boot mode.
Here are my partition details for your reference but as I am planning to do the installation from the scratch following new ideal scheme you can jump to last paragraph following the line "*********************************" for my questions.
Unfortunately my partition plan went wrong and here is what I have now:
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x3d5ba9e1
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 1002047 500000 83 Linux
/dev/sda2 151525080 361253654 104864287+ 7 HPFS/NTFS/exFAT
/dev/sda4 1003518 151001087 74998785 5 Extended
/dev/sda5 1003520 7002111 2999296 82 Linux swap / Solaris
/dev/sda6 7004160 11001855 1998848 83 Linux
/dev/sda7 11003904 51001343 19998720 83 Linux
/dev/sda8 51003392 110041087 29518848 83 Linux
Partition table entries are not in disk order
/dev/sda1 here is /tmp, /dev/sda2 is my data partition, I have separate /home / (root) partition for Kubuntu and remianing around 20 GB in extended partition is used for Oracle Linux 6.2 with default Oracle suggested LVM partition. I also have separate /boot for Kubuntu and I chose not to install grub while installing Oracle Linux. I later modified grub.cfg to add entries for Oracle Linux and now I can boot both OSs successfully.
My issue now is I cannot extend 20 GB space (in extended partition) that I have given to Oracle though I have around 40 GB space available. This is because I alreay have 4 primary partitions (one for /boot others for "data" and one extended partition). So I have to make primary partition out of free space and install Oracle in a single partition without following recommended partition layout scheme.
Now I want to do the installation of both the OS from the scratch and really need an advice on partition layout scheme. Here is summary of what I wan to achieve:
1. Keep the "data" partition (primary) intact and carve an ideal partition layout for both the OS with separate /boot, /tmp, /home, swap (and may be for /usr???). Also may be I can share swap?
2. How do I go about using LVM and is it recommended for this case? What would be ideal locations for each partitions and sizes? I already used 100 GB for "data" so now I want to keep 60 GB for Oracle Linux (and Oracle DB for which I will again make few sub-partitions) and remaining will be for Kubuntu.
Well, I am not sure if this is the right place to ask these questions but since I can see very knowlegeable top contributors here that are willing to help novice users I thought of posting these questions.
I would really really appreciate if someone can provide me rough draft of partition scheme in my case considering the sub-partitions needed for Oracle DB. I went thorugh number of forums and documentations to come up with solutuion and finally thought of getting help after much confusion.
I really need to carefully plan this time because it's third time I am doing reinstallation from the scratch because of poor plan I followed previously.
Thank you very much in advance and please let me know in case more information is needed from my side.
Regards,
Ramesh

I accidentally downloaded source DVD "Oracle Linux Release 5 Update 2 source - DVD" instead of installable ISO image. Is there anyway I can compile it to make bootable ISO image?Google will be your best friend for such a question, for instance, "Creating a Custom centos Linux bootable ISO Image". There is no need to duplicate the effort. I recommend you download the correct installation DVD, e.g. 5.8
Thing is I already have Oracle Linux 6 Update 2 (the latest) installed on my machine in dual boot mode so I dropped the idea of installing version 5.2. As per the documentation 11gR2 was not certified earlier on Linux 6.2 so I thought of installing 5.2 but it is not necessary now.So you don't need to install 5.2 anymore, but you want the information how to compile a installation DVD from the 5.2 source anyway?!
I have another couple of important questions and need guidance from the experts over here. I am not sure if it is appropriate to open a new thread but for now I am posting them here.Questions may be important for you, but not necessarily for others. No one will complain if you create a new thread for particular questions or subjects. It is better to separate your topics and questions rather than creating a multi-mega thread, which does little to help anyone else but you. It means more work on your end, but it will be easier for anyone to participate or answer your questions, and it will allow you to better award answers.
Regarding your partitioning questions: It is generally difficult to address such topics in a forum. You are asking for a book of information. My advice is to drop the old fashioned concepts of dual or triple boot options and install Oracle VirtualBox instead. It will make all of these questions obsolete and you can use whatever defaults when installing your virtual machine guest OS. Its a far more superior way of dealing with multiple operating systems on one and the same computer.
I am using Ubuntu 11.10 Desktop.
I need to urgently install Oracle 11gR2 on it.For what it's worth, if you can combine the two source below you should be able to install and run 11gR2 on Ubuntu 11.10.
Install Oracle 11gR2 on Ubuntu Linux 11.04 (64-bit) Howto
Install Oracle 11gR2 on Ubuntu Linux 11.04 (64-bit) Howto
Oracle 11gR2 Express Edition on Linux Ubuntu 11.10 howto
Oracle 11gR2 Express Edition on Linux Ubuntu 11.10 howto
However, check out VirtualBox.

How to run kvm on arm linux in skyeye

1.Redhat linux: .... /skyeye_v1/binary/skyeye
2.download testsuit from www.skyeye.org , #cd s3c2410 you will see
initrd.img, skyeye.conf, vmlinux, then i #......... /skyeye_v1/binary/skyeye -e vmlinux
you will see WELCOME TO ARMLINUX
3.#cd s3c2410 (initrd.img, skyeye.conf, vmlinux)
#makdir name
#ls (result:initrd.img, skyeye.conf, vmlinux,name)
#mount -o loop initrd.img name
4.#cd /s3c2410
#cp ...../kvm ....../s3c2410/name/bin
#cp ...../libc.so.6 ....../s3c2410/name/bin
but the spcace on the decive is not enough ,
what should i do ?
how to run kvm which is in arm linux which is in skyeye???

MarkWalsh wrote:
A fairly easy way, you can add your script to the 'Scripts' menu, then create an action that calls this script (use 'Insert Menu Item' to add to your action) and call this action through a batch in Bridge. One issue with this, though, is that it does require creating an action to specifically call the script, I don't know if you can call the script directly from Bridge.
I haven't scripted Bridge at all myself, but I believe you should also be able to rewrite your script to get the selection in Bridge, and process those files in Photoshop.
If your script is set up to process one file at a time, the Bridge/Batch technique is the simplest way to do it.
If your script needs to know what all of the files are before it can begin processing, you have to add a Menu element in Bridge and have it call your action/script in Photoshop. A bit more complicated, but there are a lot of examples of this at ps-scripts.com.
-X

How to install KVM on the ARM-Linux?

How to install KVM on the ARM-Linux?

I think you'll have some problems with 128MB RAM.....<br><br>
:P Nonsense, but I do hope that hard drive is one of those new, fancy flash hard drives, otherwise the system will spend so much time swapping that it won't get past the installer.

How to install Windows 8 or 8.1 on linpus linux with usb? I have Acer aspire E5-551G-t16q.

how to install Windows 8 or 8.1 on linpus linux with usb? I have Acer aspire E5-551G-t16q.

Welcome to Apple Support Communities
Your MacBook Pro is not designed to install Windows through an USB drive, so do not use this option. You are getting a white screen because your MacBook cannot start up from the USB drive with Windows.
Instead, use a DVD with Windows, so you will be able to install Windows. Follow these steps > http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf
Mid 2009 MacBooks Pro do not support Windows 8 officially

HOW TO INSTALL JDK1.4 ON LINUX PALTFORM AND HOW TO COMPILE A JAVA FILE

SIR PLZ KINDLY TELL ME THE PROCDURE OF INSTALL JSDK1.4 ON LINUX .
1.I HAVE DOWNLOADED IT ONA I HAVE INSTALL IN
/usr/local
but
2: do nt know how set the CALSSPATH and JAVA_HOME(ENV VARIABLES)
3:HOW TO COMPILE AND RUN THE JAVA FILE(JSP)

2.
export JAVA_HOME=/usr/local/jdk1.4.0
export CLASSPATH=.
(amending for your set up.)
Placing these in your /etc/profile file will make them run automatically on log in of a user.
3.
You need tomcat, probably, http://jakarta.apache.org.
Bhav

How to compile forms and reports in linux command line ?

Hi,
I'm working on a migration from forms 6i to 11g R2. The development/migration is being made on a Windows 7 64 bits, however, those forms and reports will run on a Linux RHEL 5. Thus, I have to compile them inside that linux box.
How can I do it? Is there a tool to compile the forms and reports in command line withn a linux box?
Thanks a lot.

Thanks for the answer, Carlos.
I run the command but this error message is displayed "FRM-91500: Unable to start/complete the build".
Edited by: _blackjack on Dec 18, 2012 5:18 AM

How to compile DNG SDK with GCC?

I tried to compile DNG SDK with GCC, but I got stuck to the following error message:
... dng_flags.h:33:28: error: RawEnvironment.h: No such file or directory ...
In other words, it seems that file 'RawEnvironment.h' is missing. I cannot find this file from DNG SDK or XMP SDK. Do you know where I could find this file or do you know how to compile DNG SDK with GCC?
Regards Sami

Please define either qMacOS or qWinOS (i.e., in your list of preprocessor defines). As you can see in line 32 of dng_flags.h this is required.

How to compile form in linux server

Hi All:
Any one can say how to compile form in linux server using form builder fmb.

If you are talking about forms 10g then here is the method
1) run x windows interface on your machine
2) login to linux server
$ export DISPLAY=<IP address of machine>:0.0
$ frmcmp.sh module_type=form module=myform.fmb userid=user/password@connectstring compile_all=yes
Regards
Anuj

How to compile KVM in a linux with a arm processor

Similar Messages

Maybe you are looking for