How to configur the user to get notified when IDOC goes in to error?

Hello Experts,
Please tell me how to notify the users when IDOC goes in to error...
please tell me where we can configure this thing,,
Thanks
Venkatesh

Venkatesh,
The best technique for this would be configuring Workflow. Whenever an Idoc goes into an error it will go to the specified user. You have to set it up and can have more than 1 user and also depending on what Idoc failed you can have different users.
Example ORDERS05 failed, let it go to the inbox of the Order team , SHPORD failed , put it in the mailbox of the WM team lead etc.
Read up the workflow documentation of SAP which is really good.
You can do other things, like have a simple email etc. but all will need program changes.
Usually I have seen some teams have the most simple mechanism.
Have a peron check the Idoc that failed and then notify the teams.
Of course 1 person can be only responsible for lets say a few Idoc types.
I have worked in such a environment where I used to look at the Order to cash Idocs ( Orders/Invoices/bank payments etc.)
Also you train the users to look at Idocs and recognise and fix errors, so they are not totally dependent on you.
But Workflow is the best solution according to me.
Regards

Similar Messages

Chat App: how to store the user IP in database when they login.

hello,
i am working on chat application. first i made a login GUI form. after login when we run the Chat program, it ask the ip address of the server to whom it want to connect. and if u enter the ip address, it will connect to the server and chat will begin, thats working perfect.
but i want to show the list of users who r logged on and when i simply click on the user name, chat should begin.
i have the logic that when any user log in, then its IP address will be stored in the database. this ip address will shown to the online users.
but i dont know how to store the user information in database when they log in. can any body suggest me wht lines of code i should use.
thanks.

palakk wrote:
i have the logic that when any user log in, then its IP address will be stored in the database. Bad approach. That will only work if this chat is only intended for use on a LAN. If it's used on the internet, then your users' IP addresses will almost always be either a) those of their routers, or b) private IP addresses, and in both cases, multiple users can have the same IP address.
this ip address will shown to the online users. Why would you want to do that? I want to chat with "Bill", not with "1.2.3.4".
but i dont know how to store the user information in database when they log in.Do the same thing that you're currently doing to store the IP address, but with the other information you want to store.
can any body suggest me wht lines of code i should use. This is not a code writing service.

How to find the user exits called at the time of posting the IDOC?

Hi,
Could anyone please how to find the user exits while posting a idoc?

Hi,
One way to ahive this is by, be ready with IDOC postiong,
then go to ST05 transaction and activate the trace after checking Table Buffer Trace.
Now post the IDOC then deactivate the trace.
Now come back to ST05 and display trace and search for calls starts with EXIT_.
Regards,
Manoj Kumar P

How can i stop user to get the same screen while entering same T code

hi experts,
how can i stop user to get the same screen while entering same T code (_Means i want user enter same t code but got different different screen how it is possible.)_
i want to know how can we set a authorization is such a manner ...
Through different different login id user got different different screen while entering same T-code.
for example if there is two functional login id mum & noida...
then user login through that and
enter any same functional tcode (for getting purchase order)
but get different different window...so how come it is possible.....
plz explain in brief
thanks in advance...plz do reply as soon as possible

For a custom transaction this is easy, you need to ask your developers to be able to direct users to different screens based on the results of an authorisation check. You could have an auth field e.g. ZSCREEN which is checked in the program & decides what screen the user has access to.
For standard transactions, unless already coded, I would forget it & do what is recommended by Subramaniam and create transaction variants as required. Assign each variant to a custom t-code and users access it that way.
What I am interested is is why do you want to do this?

How to get notified when changes happen on Hyper-V host or VMs

Is there a way to get notified on Hyper-V host or VM changes? Our intention is to notify the system-administrators on any changes.
1. How to get notified when new VM is created (or deleted) on Hyper-V.
2. How to get notified when any memory/CPU/disk is added (or deleted) on any VM(s).
In general:
- Get notified when any changes happens to Hyper-V host.
- Get notified when any changes happens on any VMs.
Our target servers are Windows Server(2008, 2008 R2, 2012, and 2012 R2)
We tried to get the notification using "Event Viewer" on different Windows servers (2008, 2008 R2, 2012, and 2012 R2)
We were able to get event-logs only on one of our 2012 R2 server as described below on creation/deletion of VMs (on another 2012 R2 server, we did not got any such event, Is there any setting required on host computer to get Hyper-V event-logs in "Event
Viewer"?)
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 12/18/2014 1:21:45 AM
Event ID: 13002
Task Category: None
Level: Information
Keywords:
User: SYSTEM
Computer: HPHyper-V.COMPUTERNAME.lab
Description:
A new virtual machine 'TestVM' was created. (Virtual machine ID A0FED305-7B1A-4BB5-952C-BA9634ACDA45)
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 12/17/2014 10:57:01 PM
Event ID: 13003
Task Category: None
Level: Information
Keywords:
User: SYSTEM
Computer: HPHyper-V.COMPUTERNAME.lab
Description: The virtual machine 'TestVM' was deleted. (Virtual machine ID A0FED305-7B1A-4BB5-952C-BA9634ACDA45)

Thanks for your reply,
Just to make it more clear:
In our environment we have enabled Hyper-V on following Windows servers: 2012 R2, 2012, 2008 R2, 2008. The environment is very dynamic, VMs are getting created and deleted very frequently. Our intention is to get notified by any means on VM creation/deletion,
currently we are relying on event-logs (we are OK with any different mechanism for such notification if there exists, i,e other than event-logs)
We were able to get event-logs only on few of our 2012 R2 server on creation/deletion of VMs. On another 2012 R2 server, we did not got any such event (do we need to make some settings on 2012 R2 to get events? If yes, what are those settings).
Also we are not getting any such event of VM creation/deletion on our Windows Server 2012, 2008, 2008 R2. Is there any setting required on hese host computer to get Hyper-V event-logs in "Event Viewer" for VM creation/deletion?

How to configure Mail Users aliases

Hello,
i have installed OS X Lion Server and after after a short while i was very dissapointed.
One of my goals was to get a easy GUI to adminstrate my mail Server.
So, after installing Server App i configure and activate a Mail Server.
Then i wanted to add aliases to my User and tried to start The Workgroup Manager.
Within i searched for a the mail tab in order to configure the User Aliases.
But there was no Mail tab there, so i have to create the aliases through the command line (edit /etc/postfix/aliases, newaliases).
I cannot believe that there is no gui for configuring mail users. Is this really so or is it in another place or have i forgotten to check or to do something else.
How do you setting up and configure mail and mail users in OS X Lion?
I am looking forward to you answers and expiriences,
Greetings,
Peter

@menzbua
You can configure mail aliases, the same way you did in Mac OS 10.6 Server... Make sure you have Installed Server Tools for 10.7. Run Workgroup Manager. Under the User, Select Short names on the 2nd or 3 line add [email protected] etc .etc

How to configure the smtp server..

i had an error when running the java mail program..
this is my program
import javax.mail.*;
import javax.mail.internet.*;
import javax.activation.*;
import java.io.*;
import java.util.Properties;
public class MailClient
public void sendMail(String mailServer, String from, String to,
String subject, String messageBody,
String[] attachments) throws
MessagingException, AddressException
// Setup mail server
Properties props = System.getProperties();
props.put("mail.smtp.host", mailServer);
// Get a mail session
Session session = Session.getDefaultInstance(props, null);
// Define a new mail message
Message message = new MimeMessage(session);
message.setFrom(new InternetAddress(from));
message.addRecipient(Message.RecipientType.TO, new InternetAddress(to));
message.setSubject(subject);
// Create a message part to represent the body text
BodyPart messageBodyPart = new MimeBodyPart();
messageBodyPart.setText(messageBody);
//use a MimeMultipart as we need to handle the file attachments
Multipart multipart = new MimeMultipart();
//add the message body to the mime message
multipart.addBodyPart(messageBodyPart);
// add any file attachments to the message
// addAtachments(attachments, multipart);
// Put all message parts in the message
message.setContent(multipart);
// Send the message
Transport.send(message);
protected void addAtachments(String[] attachments, Multipart multipart)
throws MessagingException, AddressException
for(int i = 0; i<= attachments.length -1; i++)
String filename = attachments;
MimeBodyPart attachmentBodyPart = new MimeBodyPart();
//use a JAF FileDataSource as it does MIME type detection
DataSource source = new FileDataSource(filename);
attachmentBodyPart.setDataHandler(new DataHandler(source));
//assume that the filename you want to send is the same as the
//actual file name - could alter this to remove the file path
attachmentBodyPart.setFileName(filename);
//add the attachment
multipart.addBodyPart(attachmentBodyPart);
public static void main(String[] args)
try
MailClient client = new MailClient();
String server="smtp.canvasindia.com";
String from="[email protected]";
String to = "[email protected]";
String subject="Test";
String message="Testing";
String[] filenames ={"c:/A.java"};
client.sendMail(server,from,to,subject,message,filenames);
catch(Exception e)
e.printStackTrace(System.out);
the error is .................
javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
com.sun.mail.smtp.SMTPAddressFailedException: 553 Attack detected from p
ool 59.144.8.116. <http://unblock.secureserver.net/?ip=59.144.8.*>
at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1196)
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:584)
at javax.mail.Transport.send0(Transport.java:169)
at javax.mail.Transport.send(Transport.java:98)
at MailClient.sendMail(MailClient.java:47)
at MailClient.main(MailClient.java:84)
Caused by: com.sun.mail.smtp.SMTPAddressFailedException: 553 Attack detected fro
m pool 59.144.8.116. <http://unblock.secureserver.net/?ip=59.144.8.*>
at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1047)
... 5 more
how to configure the smtp server in my machine..
please guide me...

This uses gmail account, and gmail smtp
* MailSender.java
* Created on 14 November 2006, 17:07
* This class is used to send mails to other users
package jmailer;
* @author Abubakar Gurnah
import javax.mail.*;
import javax.mail.internet.*;
import java.util.*;
public class MailSender{
    private String d_email,d_password;
     * This example is for gmail, you can use any smtp server
     * @param d_email --> your gmail account e.g. [email protected]
     * @param d_password --> your gmail password
     * @param d_host --> smtp.gmail.com
     * @param d_port --> 465
     * @param m_to --> [email protected]
     * @param m_subject --> Subject of the message
     * @param m_text --> The main message body
    public String send(String d_email,String d_password,String d_host,String d_port,
            String m_from,String m_to,String m_subject,String m_text ) {
        this.d_email=d_email;
        this.d_password=d_password;
        Properties props = new Properties();
        props.put("mail.smtp.user", d_email);
        props.put("mail.smtp.host", d_host);
        props.put("mail.smtp.port", d_port);
        props.put("mail.smtp.starttls.enable","true");
        props.put("mail.smtp.auth", "true");
        //props.put("mail.smtp.debug", "true");
        props.put("mail.smtp.socketFactory.port", d_port);
        props.put("mail.smtp.socketFactory.class", "javax.net.ssl.SSLSocketFactory");
        props.put("mail.smtp.socketFactory.fallback", "false");
        SecurityManager security = System.getSecurityManager();
        try {
            Authenticator auth = new SMTPAuthenticator();
            Session session = Session.getInstance(props, auth);
            //session.setDebug(true);
            MimeMessage msg = new MimeMessage(session);
            msg.setText(m_text);
            msg.setSubject(m_subject);
            msg.setFrom(new InternetAddress(m_from));
            msg.addRecipient(Message.RecipientType.TO, new InternetAddress(m_to));
            Transport.send(msg);
            return "Successful";
        } catch (Exception mex) {
            mex.printStackTrace();
        return "Fail";
    //public static void main(String[] args) {
    //    MailSender blah = new MailSender();
    private class SMTPAuthenticator extends javax.mail.Authenticator {
        public PasswordAuthentication getPasswordAuthentication() {
            return new PasswordAuthentication(d_email, d_password);
}

How to get notify when new Email comes in...

hi, any idea on how to get notify from phone when there is new email comes in to mailbox with specific key words in the subject, says like "urgent" ..... what are the components that i need to integrate with??
messaging version 6.2

Hi,
Off the top of my head there are two ways:
1. Use the ENS service to notify when messages arrive - filter out the ones you want. This is going to require some programming and a way to send the notification to the phone.
http://docs.sun.com/app/docs/doc/819-2655
2. Use a user-level sieve filter to send a copy of the messages you want to another email address which triggers an SMS.
http://docs.sun.com/app/docs/doc/819-2650
Regards,
Shane.

How to find the user exit for a screen..

Hi,
plz help me how to find the user exit for a screen..?
Regards
Anbu

Hi,
check this program this will give you the list of user-exit and BADI for the perticular Tcode.
REPORT zuserexit_badi.
TABLES : tstc,
tadir,
modsapt,
modact,
trdir,
tfdir,
enlfdir,
sxs_attrt ,
tstct.
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
PARAMETERS : p_tcode LIKE tstc-tcode,
p_pgmna LIKE tstc-pgmna .
DATA wa_tadir TYPE tadir.
START-OF-SELECTION.
IF NOT p_tcode IS INITIAL.
    SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
ELSEIF NOT p_pgmna IS INITIAL.
    tstc-pgmna = p_pgmna.
ENDIF.
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
    WHERE pgmid = 'R3TR'
    AND object = 'PROG'
    AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir
      WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir
        WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir
        WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir
        WHERE pgmid = 'R3TR'
        AND object = 'FUGR'
        AND obj_name EQ enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
    SELECT * FROM tadir INTO TABLE jtab
    WHERE pgmid = 'R3TR'
    AND object IN ('SMOD', 'SXSD')
    AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
    WHERE sprsl EQ sy-langu
    AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(105) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
      SORT jtab BY object.
      DATA : wf_txt(60) TYPE c,
      wf_smod TYPE i ,
      wf_badi TYPE i ,
      wf_object2(30) TYPE c.
      CLEAR : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
      LOOP AT jtab INTO wa_tadir.
        AT FIRST.
          FORMAT COLOR COL_HEADING INTENSIFIED ON.
          WRITE:/1 sy-vline,
          2 'Enhancement/ Business Add-in',
          41 sy-vline ,
          42 'Description',
          105 sy-vline.
          WRITE:/(105) sy-uline.
        ENDAT.
        CLEAR wf_txt.
        AT NEW object.
          IF wa_tadir-object = 'SMOD'.
            wf_object2 = 'Enhancement' .
          ELSEIF wa_tadir-object = 'SXSD'.
            wf_object2 = ' Business Add-in'.
          ENDIF.
          FORMAT COLOR COL_GROUP INTENSIFIED ON.
          WRITE:/1 sy-vline,
          2 wf_object2,
          105 sy-vline.
        ENDAT.
        CASE wa_tadir-object.
          WHEN 'SMOD'.
            wf_smod = wf_smod + 1.
            SELECT SINGLE modtext INTO wf_txt
            FROM modsapt
            WHERE sprsl = sy-langu
            AND name = wa_tadir-obj_name.
            FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
          WHEN 'SXSD'.
For BADis
            wf_badi = wf_badi + 1 .
            SELECT SINGLE text INTO wf_txt
            FROM sxs_attrt
            WHERE sprsl = sy-langu
            AND exit_name = wa_tadir-obj_name.
            FORMAT COLOR COL_NORMAL INTENSIFIED ON.
        ENDCASE.
        WRITE:/1 sy-vline,
        2 wa_tadir-obj_name HOTSPOT ON,
        41 sy-vline ,
        42 wf_txt,
        105 sy-vline.
        AT END OF object.
          WRITE : /(105) sy-uline.
        ENDAT.
      ENDLOOP.
      WRITE:/(105) sy-uline.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No.of Exits:' , wf_smod.
      WRITE:/ 'No.of BADis:' , wf_badi.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(105) 'No userexits or BADis exist'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
DATA : wf_object TYPE tadir-object.
CLEAR wf_object.
GET CURSOR FIELD field1.
CHECK field1(8) EQ 'WA_TADIR'.
READ TABLE jtab WITH KEY obj_name = sy-lisel+1(20).
MOVE jtab-object TO wf_object.
CASE wf_object.
    WHEN 'SMOD'.
      SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
      CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    WHEN 'SXSD'.
      SET PARAMETER ID 'EXN' FIELD sy-lisel+1(20).
      CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Reagards,
Bharat.

How to configure the mail in Sales Support of SAP SD

Hi,
Experts I have one scenario in my co. that we have 300 users we have to send the mails to our 300
users for every 2 or 3 months once. Regarding new promotions (Discounts , Price changes) of
company. For this every time we are changing the sold to party in quotation and taking printouts then
sending to our users its a lengthy procedure, to avoid this long time very soon we are going to
implement SAP SD Sales Suppor in our company is there any functionality in SAP to send mail at
once to our 300 users may i know about how to configure the mail for this scenario.
Thanks and Regards
MH

Hi Prashant,
Thanks for you immediate responce, Can you give me the configuration steps in detail.
Thanks and Regards,
MH

How to configure the runtime and consolidation for a track in CMS.

How to configure the runtime and consolidation for a track in CMS.
I can see the track exists in CMS but the same doesnt pull up in the NWDS in the development configuration perspective.
I compared the given track with the one which gets pulled up in NWDS. Theres something called runtime system and consolidation which isnt defined for the track which is invisible.
Please advise , what are these required for. And how can we configure the same.

The runtime systems are defined for a track to setup the Transport path for any code changes....the Consolidation system is usually defined as a Virtual system for the track and used for comparison and fixing any broken or Dirty DC's ....that means it's not used as a Runtime System for Deployment as compared to DEV,QAT and PROD used for Deployment...
Hope it helps..
Regards,
Shikhil

How to Configure the Blackberry Facebook Integrated Application

Hi Friends ,
How to Configure the Blackberry Facebook Integrated Application while getting the Application Id , Application Secret for Registering the App in Facebook.
Please Help me , It''s Urgent.
Thanks & Regards,
Nagarjuna Metla.
arjuna

Bonjour,
Effectivement, la valeur du filtre de la carte NI-6280 est 40kHz.
En simulant la carte, j'ai pu faire le test avec le VI joint.
Si ce VI ne fonctionne pas, quelle est le code d'erreur obtenu et à quelle fonction apparaît-il ?
Salutations,
Isabelle
Ingénieur d'applications
National Instruments France
Attachments:
filtre 6280.vi ‏73 KB

Reg: Configuring the User-Defined Message Search

Hi Experts !
I am getting an error while configuring the user defined message search.
Followed all the step mentioned in the sap help documentation.
http://help.sap.com/saphelp_nwpi711/helpdata/en/48/c85598f63335bfe10000000a42189d/frameset.htm
The last step, where we need to enter URL for WSDL Access i am getting the following error:
Error in WSDL access: Exception occurred in communication framework:
Error in HTTP Framework:404Not Found
http://<Host>/<Port>/MessageSearch/MessageSearchImplBean
You should enter the host name and the HTTP port for the Advanced Adapter Engine
i didnt get the meaning of above sentence : Is it different from what we use in the URL to access ESR and ID.
Is there any other steps to make MessageSearch/MessageSearchImplBean available
Regards,
Srinivas
Edited by: Srinivas on Oct 1, 2010 7:48 PM

Hi José Omar,
thanks for the reply...
I tried manual configuration but with no luck..opened a similar forum thread
I have applied the sap note suggested ,thinking that the error is due
to any source code.
The data synchronization is happening properly , but when i use test extractor button it throws the above mentioned error.
In the system details in have given the port number as 50700(which is visible in the link when we open integration builder page) and ESR client as 001.
could you please let me know if the exact values to be filled in transport setting.i just entered the port and client , other things
as default.
Regards,
Srinivas

How to configure the .EAR to the OC4J server step by step ?

I have configured the JavaBean of the OC4J server with the following step:
1.create the eosp.ear with the JDeveloper's wizard
2.copy the eosp.ear to the OC4J Server with the Path:
J2EE_HOME/applications/
3.modify the server.xml and add the following words:
<application name="eosp" path="../applications/eosp.ear" auto-start="true"/>
4.restart the OC4J server and show the information:
Auto-deploying eosp (New server version detected)...
5.create the new JSP and this source code is:
<%@ page import="com.beautybeard.eosp.common.*"%>
<%@ page import="com.beautybeard.eosp.constant.*"%>
6.visit the JSP and show the error information:
Error parsing JSP page /eosp/usr_profile/login.jsp
Syntax error in source/eosp/usr_profile/login.jsp.java:5: Package com.beautybeard.eosp.common not found in import.import com.beautybeard.eosp.common.*; ^/eosp/usr_profile/login.jsp.java:6: Package com.beautybeard.eosp.constant not found in import.import com.beautybeard.eosp.constant.*; ^2 errors
why?
why can not find the package?
please help me out

Hi Sky-
It looks like you have a web application only.
You need to create a war file as described above. A war file is a jar'd file containing your web components, including your javabean class files, etc. JDeveloper 9i can do this for you. You've already done the hard work. Suppose that the project you have created that contains your javabeans, etc in JDev 9i is called myproject (with myproject.jpr as the project file). Right click on the myproject.jpr in the JDev navigator and select 'new...', go to Deployment Profiles and select J2EE Web Module (WAR File) - a general screen will pop up asking you to save the deployment profile (you can just use the default if you want). Once you select OK on that, you will get a screen that calls itself the J2EE Web Module Deployment Profile Settings. This is the screen that you can use to enter your information.
Your servlet and javabean classes will go into WEB-INF/classes subdirectory that you see to your left in this window. Simply select the WEB-INF/classes entry and it will display a list of your java sources (it will only place the compiled output in this directory - there is a toggle for it).
Once you have specified that your javabean and servlet classes go in this directory, you should be set. Go ahead and save / close. In your navigation screen under your project (myproject.jpr or whatever your project name is) you will see your files, jsps, etc and something called webapp1.deploy (if you accepted the default). If you right-click on that, you will get a menu that asks a number of things, one of which is to Deploy to EAR file. Select that entry and it will create an ear file for you. You can play with the various settings to change the name of the ear file, but that's about all you have to do. Once this is completed, you can put the EAR file on your linux box or wherever you want, adjust your server.xml and default-web-app.xml files and launch the app!
Good luck!
Ray
Hi,Ray
Thank you for giving me the detail information!
I'm sorry that I can not give the detail and clear problem ,which make you delusoried.
ok,now I give you my aim.
1. I will construct my application system with JavaBean(not EJB),Servlet,JSPs (linux+IAS+JDeveloper+Oracle8i database)
2. I will package business function with JavaBean. example:
* CheckLogin.java
package com.beautybeard.eosp.javabean.usrprofile;
import com.beautybeard.eosp.common.*;
import com.beautybeard.eosp.data.*;
import java.io.*;
import java.lang.*;
public class CheckLogin{
public CheckLogin()
//do nothing here
public boolean getCheckLogin(){
3. I will control the request and response with Servlets.
example:
*CheckLoginSevlet.java
package com.beautybeard.eosp.servlet.usrprofile;
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.util.*;
import java.sql.*;
import com.beautybeard.eosp.servlet.*;
import com.beautybeard.eosp.javabean.usrprofile.*;
public class CheckLoginServlet extends DefaultServlet
public void service(HttpServletRequest req,HttpServletResponse res) throws IOException, ServletException
//use the JavaBean
CheckLogin cl = new CheckLogin();
if (cl.getCheckLogin){
res.sendRedirect("login.jsp");
}else{
res.sendRedirect("err.jsp");
4. I will display the result with JSPs:
example:
<%//login.jsp%>
<%@ page import="com.beautybeard.eosp.common.*"%>
<%@ page import="com.beautybeard.eosp.data.*"%>
5. I have success on running the above steps in the 9iJDevelper(pure java) environment(OS:Windows 2000 Server), and now I will move the JSPs ,Servlets,JavaBeans to the Server(linux) without the JDeveloper's deployment wizard.
how to configure the IAS to carry my point?
thank you!
Sky liu

How to configure the XI and PLM in discovery box

How to configure the XI (SLD, Integration repository, Integration Builder ) in SAP discovery system.
And also i want to configure the PLM and xRPM within R/3 of discovery box.
Regards,
Nilesh Damle

Hi Frank,
well, first of all, your application provides log configuration information using an XML file at deployment time. This file is called log-configuration.xml (you can see the DTD description here: http://help.sap.com/saphelp_nw04/helpdata/en/48/ef8748caed894bb4b3ae953a60c592/frameset.htm). There you can set configure log controllers, which could be two types: location and category. So, you can specify your location and severity there. This is described here: http://help.sap.com/saphelp_nw04/helpdata/en/35/671c0136b4714c9e1b16b68211287b/frameset.htm.
Then, after the application is deployed, the log configurations you provided for it are registered with the Log Configuration tool I mentioned about. Using this tool you can later on modify your configurations at runtime (for example, change the severity level) without having to redeploy the application.
I hope it's clearer now? I guess it was me not getting your first question correctly that caused your confusion.
Greetings,
Ivo

How to configur the user to get notified when IDOC goes in to error?

Similar Messages

Maybe you are looking for