How to configure a listener to listen on a different port rather than 1521 and register it on the database

Hi Everyone,
I have used 11gR2 RAC for a couple of years and now I've got this issue because I have tried to setup more than one database on RAC infrasturcture:
I have an existing database on my RAC. (lets call it orcl) which is listening on port 1521 and is functioning properly. Now I want to create anoher database (call it test) which is going to listen on port 1526. I am able to create a listener using netca, (as oracle recommended, I've created it with grid user). I am also able to create a database using dbca (with dba user). My problems stem from when I want to configure listener to register with the new database. If i set local_listener to my newly configured database, it won't be able to tnsping and therefore login. If I create tnsnames.ora file on local or remote server, I am able to ping the database, but when I want to connect using sql*plus (or any other client) I receive TNS-12514 error. By the way, I am using AIX 7.1 as my machine.
Let me know if any more info is required on this topic.

> Now I want to create anoher database (call it test) which is going to listen on port 1526.
Why? What is the purpose of using another listener? An Oracle Listener was designed to service multiple databases running on the same server. In all my years of working with Oracle and running multiple databases on the same machine, I have yet to be required to run more than one listener. And almost every single time I've seen someone try to provide rationale for multiple listeners, the technical reasons have no merit.
> If i set local_listener to my newly configured database
The LOCAL_LISTENER parameter does not point to a database...it points to a LISTENER!
LOCAL_LISTENER=(ADDRESS = (PROTOCOL=TCP)(HOST=hostname)(PORT=1526))
Cheers,
Brian

Similar Messages

How do i remove mail from my iPad inbox in bulk rather than going and ticking each one individually?

I have many emails in my inbox on my ipad and I would like to delete them "en masse" - is this possible without deleting them in

If you have iOS7 on your device it has the ability to mass delete. If you have 6 or lower then there is no way do to bulk deletes on your iPad.

How can i move songs to my playlists using my iphone rather than computer?

How can I move songs to my playlist using my iphone rather than my computer?

@allamb & stephanW
I found this thread via a search, I have a new iphone 5 (also i am completely new to iphone, having been the last few years on android) and i have spent 20 minutes trying to figure out how to add a song to a playlist.
You see i sit a work and listen to dozens of tunes, and i want to add a paticular song to a particular play list, and low and behold I can't, excuse my special characters but "What the f#%k itunes/apple??? - how can this be? Such a commonly needed function and for itunes to be the number music player in the world not to have this feature is ludicrus.
I am lucky that i only have about 500 songs on my iphone thus far, i feel sorry for stephanW with 4000+ !!
Apple - please fix - this is schoolboy programming stuff...

How to connect new iMac to tv with a hdmi cord on one end and a thunderbolt on the other end

how to connect new iMac to tv with a hdmi cord on one end and a thunderbolt on the other end

You need a > Moshi Mini DP to HDMI Adapter with Audio Support - Apple Store (U.S.) to plug into the ThunderBolt port and an HDMI cable.

I am trying to update my time machine backup on time capsule, but time machine keeps trying to create an entirely new backup (evidenced by the 200GB backup size). How can I get time machine to modify my old backup rather than create a new one?

I am trying to update my time machine backup on time capsule, but time machine keeps trying to create an entirely new backup (evidenced by the 200GB backup size). How can I get time machine to modify my old backup rather than create a new one?

It must have found the old backup corrupt.. so you will more than likely have little choice. You can archive off the old backup if it is still useful.
You can also verify it. See A5 http://pondini.org/TM/Troubleshooting.html
He also has some info on this problem. eg C13.

How can I change my safari preferences to save a file rather than download

How can I change my safari preferences to save a file rather than it downloading

danieladorotiak wrote:
When I click on the 'save application file, it download's it and doesn't give me the option to save it.
I can't be sure, but what probably happens is that the page doesn't give you a link to a downloadable file, but a button which activates a script. There's nothing you can do about that, because you don't control the script.
it just downloads the transcripts not the document.
It sounds like the downloaded file does not open or execute as it's supposed to (which, for instance, would happen if what you downloaded was a Java application, but you didn't have Java installed).
If you are allowed to, give us the URL and we'll have a look. Also, you should add what version of Mac OS X and of Safari you are using, and you should correct your profile (which says "Mac Pro" -- this forum is for the MacBook Pro, which is a different computer from the Mac Pro).

Hi, I would like to know how can I recover a document from pages that I didn't save anytime and instead of clicking the button save I clicked the delete button at the end. Is there any way to recover it?

Hi, I would like to know how can I recover a document from pages that I didn't save anytime and instead of saving the doc I clicked the delete button. Is there any way to recover it?

Regardless of application, the first step that I take is to save and name the current document — even if it has no content yet. With Pages, this good habit enables autosave. As you add content, your document revision history is restorable via the File Revert To menu. The delete key has the same document foreboding as only teaching a pet raven to speak "Nevermore."

I am selling my apple mac pro but do not know how to deregister and register it to the new owner; how do you do this?

I am selling my apple mac pro but do not know how to deregister and register it to the new owner; how do you do this?

Before you sell or give away your computer, in addition to the steps mentioned in this support article, take these steps:
Run Apple Diagnostics or the Apple Hardware Test. The buyer will do this (or he should), and you don't want to be surprised by the results.
Reset the PRAM and the SMC, which might contain personal information.
If you set a firmware password, remove it by running Firmware Password Utility in Recovery mode.
If you activated FileVault in OS X 10.7 or later, turn it off.
If you use Boot Camp, the partition must be deleted
If you created any other data partitions on the internal drive, remove them in Disk Utility.
Erase the data partition(s) with the option to zero out data. An SSD doesn't need to be zeroed.
You can't legally or practically transfer any software downloaded from the Mac App Store to the new owner of the machine, even if it was free. That includes OS X, so if you upgraded to OS X 10.7 or later, you must reinstall an older OS, either from the installation media, if applicable, or by booting into Internet Recovery (option-command-R at the startup chime.) If you installed from physical media, deliver those to the new owner.
If you're selling the machine, or donating it in working order, and it originally shipped with OS X 10.4 or 10.5, then you have the option of installing either from the discs that came with it or from a retail Snow Leopard disc (which you must then transfer with the machine.) The buyer should understand that if he doesn't get the original discs from you, he won't get the bundled iLife applications or the Apple Hardware Test. Replacements for the original discs can be ordered from Apple.
The new owner will have to redownload any software that came from the App Store, including OS X upgrades, under his or her Apple ID. If you ever updated the bundled iLife applications (Garage Band, iMovie, and iPhoto) through the App Store, you can't transfer those either.
Remove the machine from your list of registered products. If it's still covered by an AppleCare Protection Plan, transfer the coverage to the new owner by following the instructions in the AppleCare Terms and Conditions (under the heading "Transfer of Plan.")

How can I get Elements 11 to open up in Organizer rather than Editor?

How can I get Elements 11 to open up in Organizer rather than in Editor?

Well, you can go to Window>Welcome and make your change there, but the welcome screen leaves a process always running, so you would do better to go into the Program Files or Program Files (x86) in windows or the applications folder on a mac and find the actual .exe/application for the organizer and make a desktop shortcut/dock icon and use that in the future to launch the organizer, avoiding the welcome screen entirely.

How to install an additional itunes? I want have all jazz on one and everything else on the other.

How do install an additional itunes? Iwant to have all jazz on one and everything else on the other.

You cannotYou can start another library.
Why not just use playlists/smart playlists?

How do I get a numbers spread sheet to open where I left it and not start from the beginning every time I open it?

How do I get a numbers spread sheet to open where I left it and not start from the beginning every time I open it?

There is no built-in setting for redirecting a bookmark to a new tab.
Is it possible that the computer which does that has an add-on such as the Tab Mix Plus extension installed? TMP has a setting for that (Events > Tab Opening).
https://addons.mozilla.org/firefox/addon/tab-mix-plus/

How to configure oracle listener profile for multiple oracle database

Hi,
I am going to install solution manager system in the same server of ERP EHP4 on Windows. Both DB are oracle.
I'd like to know how to configure listener in this kind of envirnmonent.
a. use two listener and different ports
b. use same listener but different ports
c. use same listener and same port
Which is the correct mothed?
And, after installation, there seem three set of profiles of listten, one for ERP, one for SLM, and the other for OS?(%windir%system32), which one is functional?
Please advise.
Thanks a lot.
Regards,
Alex

Hi,
standard installation is creating new configs for listener for each instance.
I would recommend to use one listener per each instance.
YOU CAN NOT HAVE one port number for two differnet systems!
If you want to use one listener than you must adapt tnsnames.ora, listener.ora and ensure that both systems will use different port numbers.
For example PORT= 15<system number>
Peter

How to configure JMS listener in separate jvm

Hi Guys,
I am new to this forums so please let me know if iam making any mistake.
I have 2 instances of tomcat running on different port numbers. I am using apache ActiveMq as my message broker for sending the jms message using queue. Code for sending the message is present in a servlet. So when I run that servlet message gets sent.
In my other tomcat i retrieve this jms message. But for me issue is this messsage gets retrieved only if i write this code in a servlet and I run that servlet.
Is there any way where i can configure a listener for my class present in tomcat 2. So that when message gets sent that piece of code gets triggered automatically and I can read that message.

Sounds like you want basic JMS message consumer functionality.
http://docs.oracle.com/javaee/1.4/tutorial/doc/JMS4.html#wp79145

How do you listen to music that was on your iphone and ended up in the cloud, and is no longer on the phone

daughters iphone 4 had an update, in the process of the update all of her music and apps went into the icloud. How do we get these back on her phone and out of the cloud.

You can redownload them as explained here: http://support.apple.com/kb/ht2519.

How to configure Send Handler for BizTalk 2013 Dynamic Send Port on deployment?

Hi,
I do know how to manually configure a send handler for a dynamic send port in BizTalk 2013 Administration console. Though, once you export your application's configuration to a binding file, the dynamic send port's configuration does not
contain any information regarding the send handler. When you try to use this binding file when deploying your application your dynamic port's send handler falls back to the default host instance.
So my question is, how could we automate this process to avoid manual step in a dynamic port configuration during deployment?
Thank you,
--Vlad

Hey vlad,
As discussed at work in the office.. I woudl take the powershelll approach for now as a workaround. Here's a trivial script for my local dev box (all in one biztalk & SQL) (must be run in an x86 powershell session):
param
[string] $bizTalkDbServer = ".",
[string] $bizTalkDbName = "BizTalkMgmtDb",
[string] $fileHostInstance = "SendingHost",
[string] $sendPortName = "sm_dynamic_sp_test"
[System.reflection.Assembly]::LoadWithPartialName("Microsoft.BizTalk.ExplorerOM") | Out-Null
$catalog = New-Object Microsoft.BizTalk.ExplorerOM.BtsCatalogExplorer
$catalog.ConnectionString = "SERVER=$bizTalkDbServer;DATABASE=$bizTalkDbName;Integrated Security=SSPI"
foreach($sp in $catalog.SendPorts)
if($sp.Name -eq $sendPortName)
  "Found send port $($sp.Name), analyzing send handler"
  foreach($sh in $sp.DynamicSendHandlers)
   if($sh.SendHandler.TransportType.Name -eq "FILE")
    if($sh.SendHandler.Host.Name -ne $fileHostInstance)
     "Changing $($sh.Name) send handler to '$fileHostInstance' from '$($sh.SendHandler.Host.Name)'"
     $sp.SetSendHandler("FILE", $fileHostInstance)
    else
     "Send handler for $($sp.Name) is already '$fileHostInstance' ignorning .. "
$catalog.SaveChanges()

How to configure a listener to listen on a different port rather than 1521 and register it on the database

Similar Messages

Maybe you are looking for