An error occurred while trying to read data from...
Hello,
I'm getting this error repeatedly in more than one project. It happens when i click Save a topic. It also happened when I tried to create a new folder in the Project Files, and then i could not create the new folder. I'm using RoboHelp HTML 9.2. I did try moving the project files off the network drive and into my local C:/ drive, but still get the error.
Are there any known cures?
Thank you,
Sherry
You will see the topics are still there in Windows Explorer. What has happened is that the root.fpj file that you showed in your first post was corrupt because it was on the network. Now it cannot rebuild the new CPD in the normal way.
Personally I would be creating a new project and importing stuff from your old project.
You can import all the topics in a single folder in one go, you don't have to import topic by topic.
There is information on my site about rebuilding broken projects.
Provided you new project is local, you should be OK.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge
Similar Messages
-
An error occured while trying to read data
Hi RoboHelpers,
While opening my main project today (large project w/ thousands of topics) my project froze twice and wasn't responding, so I forced it to close via Task Manager and deleted the CPD file, thinking it was the culprit.
I then got this error when I tried to reopen the .XJP file:
"An error occurred while trying to read data from
<D:\Hg\PcdmisQA\Pcdlrn\CoreHelp\13_hardware_topics\13_hardware_topics.fpj><1>."
I clicked OK to get past this error, and now my htms are not appearing inside the Topic List for 13_hardware_topics and the TOC links show that the topics don't exist. But the .htms do exist inside the actual directory in Windows.
I think I can fix this by importing the .htms inside 13_hardware_topics, but I'm not sure why it happened in the first place. Is there a way to just fix the .fjp file instead--if this is indeed the problem?
My 13_hardware_topics.fjp structure looks like this (sorry for the post length):
<?xml version="1.0" encoding="utf-8"?>
<rhpml majorversion="2" minorversion="0">
<folders/>
<topics>
<topic>
<name>Tool_ID.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Probe_Description.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Defining_Hardware.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Defining_Hardware_Introduction.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>List_of_Available_Tools.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Tool_Type.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Understanding_the_Probe_Utilities_dialog_box.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>use_trax_calibration.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Defining_Probes.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Use_Partial_Calibration.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Probe_File_Name.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>User_Defined_Calibration_Order_check_box.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Search_Override_I_J_K.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Optical.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Showing_an_Animated_Probe_Changer.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Using_the_Quick_Fixture_Dialog_Box.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Inserting_Quick_Fixtures.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Additional_Information_for_Creating_Multiple_Arm_Machines.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>print_list.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>example_printout.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Defining_Machines.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Selecting_or_Creating_a_Machine_for_Display.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Deleting_the_LOADMACHINE_Command.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Ball.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Removing_the_Animated_Machine_from_the_Graphics_Display_Window.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>collision_tolerance.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Spherical_Tool_and_Optical_Tip.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Additional_Information_on_the_Machine_s_Axes.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Migrating_Part_Programs_Between_Machines_Using_PH10_and_Tesa_Star_M_Probes.htm</nam e>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Probe_Setup.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>autocalibrate_probe.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Specifying_Collision_Tolerances.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Using_Existing_Quick_Fixtures.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Step_4_-_Begin_Calibration.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Step_3_-_Define_Ports.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Step_8_-_Measuring_Port_2.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Step_6_-_Measuring_Port_1.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Step_7_-_Measuring_Port_3.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Step_9_-_Review_Calibration_Results.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Displaying_Existing_Machines_in_the_Graphics_Display_Window.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Calibrating_the_FCR25_Probe_Changer.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Inserting_and_Removing_Quick_Fixtures.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Selecting_the_No_Machine_Item.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Additional_Information_on_the_Machine_s_Home_Position_area.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Deleting_the_Machine.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Creating_a_Relationship_between_the_Machine_and_the_Part.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>defining_probe_changers.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Quick_Fixture_Mode_s_Mouse_and_Keyboard_Commands.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Adding_Custom_Fixtures.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>add_tool.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>With_Averaging.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Shank_Optical_Vector_I_J_K.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Fast_Probe_Mode.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>X_Y_and_Z_Center.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Delete_Tool.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>ScanRdv.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>available_tip_types.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Thickness_of_the_ball_tip.htm</name>
<name>PrbRdv.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Edit.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Shank_Vector_I_J_K.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Spherical_Tool_and_Ball_Tip.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>edit_probe_components.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Edit_Tool.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Spherical_Tool_and_Ball_Tip.htm</name>
<name>To_delete_a_wrist_angle.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Probe_Setup.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Measure.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Spherical_Tool_and_Disk_Tip.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>PrbRdv.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Previewing_your_Probe_Configuration.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>use_unit_calibration_data.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>New_Angles_List_box.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>To_Display_the_Probe_Changer_in_the_Graphics_Display_window.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>calibration_date_and_time.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Global_Used.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Individual_Angle_Data.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Spherical_Tool_and_Barrel_Shank_Tip.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>calibration_date_and_time.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Equally_Spaced_Angles_Data.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Reset_Tips.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Spherical_Tool_and_Disk_Tip.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>use_unit_calibration_data.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>dmis_label.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>add_angles.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Notes_on_the_Add_Angle_option.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Working_with_the_Angle_Grid.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>available_tip_types.htm</name>
<name>calibration_date_and_time.htm</name>
<name>Results.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Spherical_Tool_and_Ball_Tip.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Reset_Tips.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Diameter_Length.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Previewing_your_Probe_Configuration.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>User_Defined_Calibration_Order_check_box.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Use_Wrist_Map_If_Available_check_box.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Diameter_Length.htm</name>
<name>Use_Wrist_Map_If_Available_check_box.htm</name>
<name>Probe_Description.htm</name>
<name>List_of_Available_Tools.htm</name>
<name>Probe_File_Name.htm</name>
<name>use_trax_calibration.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Step_2_-_Define_the_Mount_Point.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Use_Partial_Calibration.htm</name>
<name>Probe_Description.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>autocalibrate_probe.htm</name>
<name>Search_Override_I_J_K.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Disk.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Migrating_Part_Programs_Between_Machines_Using_PH10_and_Tesa_Star_M_Probes.htm</nam e>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Calibrating_the_ACR1_Probe_Changer.htm</name>
<name>Step_1_-_Select_the_FCR25_Probe_Changer.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>example_printout.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Creating_a_Relationship_between_the_Machine_and_the_Part.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>defining_probe_changers.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Calibrating_the_CW43_Probe_Changer.htm</name>
<name>Optical.htm</name>
<name>example_printout.htm</name>
<name>To_Display_the_Probe_Changer_in_the_Graphics_Display_window.htm</name>
<name>defining_probe_changers.htm</name>
<name>Inserting_Quick_Fixtures.htm</name>
<name>Shank.htm</name>
<frameset>0</frameset>
</topic>
<topic>
<name>Step_9_-_Review_Calibration_Results.htm</name>
<name>Additional_Information_on_the_Machine_s_Axes.htm</name>
<name>Step_5_-_Prepare_Probe_Changer.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Migrating_Part_Programs_Between_Machines_Using_PH10_and_Tesa_Star_M_Probes.htm</nam e>
<name>Probe_Setup.htm</name>
<name>Selecting_or_Creating_a_Machine_for_Display.htm</name>
<name>Step_6_-_Measuring_Port_1.htm</name>
<name>Step_9_-_Review_Calibration_Results.htm</name>
<name>Quick_Fixture_Mode_s_Mouse_and_Keyboard_Commands.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<name>Step_6_-_Measuring_Port_1.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Inserting_and_Removing_Quick_Fixtures.htm</name>
<name>SP600__Step_3_-_Prepare_for_Calibration.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Selecting_the_No_Machine_Item.htm</name>
<name>Deleting_the_Machine.htm</name>
<name>Creating_a_Relationship_between_the_Machine_and_the_Part.htm</name>
<name>SP600__Step_6_-_Take_the_Third_Manual_Hit.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>SCP600__Step_2_-_Define_the_Mount_Point.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Showing_an_Animated_Probe_Changer.htm</name>
<name>ACR1__Step_1_-_Select_the_ACR1_Probe_Changer.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Additional_Information_for_Creating_Multiple_Arm_Machines.htm</name>
<name>ACR1__Step_3_-_Define_the_Mount_Point.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>ACR1__Step_4_-_Define_Ports.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>ACR1__Step_5_-_Prepare_for_Calibration.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>ACR1__Step_6_-_Measure_Port_1.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>ACR1__Step_7_-_Measure_Port_8.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>ACR1__Step_9_–_Measuring_Datum_Sphere_with_PEM_Extension(s)_(optional).htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>SP600__Step_4_-_Take_the_First_Manual_Hit.htm</name>
<name>Step_1_-_Select_the_SP600_Probe_Changer.htm</name>
<name>ACR1_Step_10_Review_Calibration_Results.htm</name>
</topics>
</rhpml>
Thanks,
JaredHi Jared.
I don't know if this is at the root cause of the error but I see that the closing </name> tag has a number of instances where there is a spurious space inside it:
<topic>
<name>Additional_Information_for_Creating_Multiple_Arm_Machines.htm</ name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Additional_Information_on_the_Machine_s_Home_Position_area.htm< /name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Creating_a_Relationship_between_the_Machine_and_the_Part.htm</n ame>
<comments></comments>
<frameset>0</frameset>
</topic>
There are others.
The RoboColum(n)
@robocolumn
Colum McAndrew -
An error occurred while trying to save data to rhbag.apj
Opening a RoboHelp 8 project in new RoboHelp 11 and receive the following error:
An error occurred while trying to save data to rhbag.apj...
I can see this file in the project but many of my baggage files (.pdfs) are missing and I am not able to add them back into the project. I select New Baggage file and select the file to add, however the file is not added and no other error is received.
Any assistance is greatly appreciated.Is the file writable or set to read only?
Probably, the rhbag.apj got corrupted. If you open it up with notepad (or other text/xml editor), what do you see? -
I have SCCM 2012 SP1 recently upgraded to R2. I'm currently setting this up to migrate my production 2007 site. However, I'm trying to use Content Library Explorer on my DP's. I have 3 dps. DP2 connects fine but when i try and connect to DP1 +3 i get
the following error: An error occurred while trying to read the package metadata. The package
PackageID is invalid and must be redistributed from the Configuration Manger console.
Now i can't find any trace of this at all in the console. In the SMSPackagesHist table i can see the package ID and the deleted time was 29-07-2013. This most likely was me trying to create software updates back last year when i initially setup the site.
The package is not listed as content on any of the 3 DPs and i can't find any trace of it at all in the console.
I'm not very familiar with 2012, so not sure what I've done.
Any help or advice appreciated.
Thanks
JaneHi Torsten,
thanks for this. I did a search of the WMI key and found this document: http://blogs.technet.com/b/configmgrteam/archive/2012/05/07/troubleshooting-content-mismatch-warnings-on-a-distribution-point-in-system-center-2012-configuration-manager.aspx (does
this mean it is supported?)
however, on those 2 DP's in that class, the suspect package ID is not listed!???
Any more ideas?
Many thanks
Jane -
LPX-00601: Invalid token in: err while trying to read data from xml
Hey ,
While trying to read data from xml i got err:
LPX-00601: Invalid token in: 'path'
the proc. i'm using to read data from the xml is:
procedure read_xml_file_test (in_filename in varchar2)
is
my_dir varchar2(20) := 'XML_DIR;
cur_emp2 number:=0;
l_bfile BFILE;
l_clob CLOB;
l_parser dbms_xmlparser.Parser;
l_doc dbms_xmldom.DOMDocument;
l_nl dbms_xmldom.DOMNodeList;
l_nl2 dbms_xmldom.DOMNodeList;
l_n dbms_xmldom.DOMNode;
l_n2 dbms_xmldom.DOMNode;
l_temp VARCHAR2(1000);
v_errors internet_clients.errors%type;
src_csid NUMBER := NLS_CHARSET_ID('UTF8');
dest_offset INTEGER := 1;
src_offset INTEGER := 1;
lang_context INTEGER := dbms_lob.default_lang_ctx;
warning INTEGER;
v_count number := 0; --total records
v_count_s number := 0; -- sucsess record
v_count_f number := 0; -- failed record
v_flag varchar2(1);
v_char2 varchar2(1);
v_l1 VARCHAR2(255);
v_l2 VARCHAR2(255);
v_l3 VARCHAR2(255);
v_l4 VARCHAR2(255);
v_l6 VARCHAR2(255);
BEGIN
l_bfile := BFileName(my_dir, in_filename);
dbms_lob.createtemporary(l_clob, cache=>FALSE);
dbms_lob.open(l_bfile, dbms_lob.lob_readonly);
dbms_lob.loadclobfromfile(l_clob, l_bfile, dbms_lob.getlength(l_bfile), dest_offset,src_offset, src_csid, lang_context, warning);
dbms_lob.close(l_bfile);
-- make sure implicit date conversions are performed correctly
dbms_session.set_nls('NLS_DATE_FORMAT','''DD/MM/RR HH24:MI:SS''');
-- Create a parser.
l_parser := dbms_xmlparser.newParser;
-- Parse the document and create a new DOM document.
dbms_xmlparser.parseClob(l_parser, l_clob);
l_doc := dbms_xmlparser.getDocument(l_parser);
-- Free resources associated with the CLOB and Parser now they are no longer needed.
dbms_lob.freetemporary(l_clob);
dbms_xmlparser.freeParser(l_parser);
-- Get a list of all the nodes in the document using the XPATH syntax.
l_nl := dbms_xslprocessor.selectNodes(dbms_xmldom.makeNode(l_doc),'soap:Envelope/soap:Body/GetFieldsNameResponse/GetFieldsNameResult/diffgr:diffgram/DataSet_FRM_GANERIC_PROP/FRM_GANERIC_PROP');
-- Loop through the list and create a new record in a tble collection
-- for each record.
FOR cur_emp IN 0 .. dbms_xmldom.getLength(l_nl) - 1 LOOP
l_n := dbms_xmldom.item(l_nl, cur_emp);
cur_emp2:=0;
loop
v_count := v_count + 1;
begin
-- Use XPATH syntax to assign values to he elements of the collection.
dbms_xslprocessor.valueOf(l_n,'L1/text()',v_l1);
dbms_xslprocessor.valueOf(l_n,'L2/text()',v_l2);
dbms_xslprocessor.valueOf(l_n,'L3/text()',v_l3);
dbms_xslprocessor.valueOf(l_n,'L4/text()',v_l4);
dbms_xslprocessor.valueOf(l_n,'L6/text()',v_l6);
exception
when others then
null;
end;
exit when cur_emp2=dbms_xmldom.getLength(l_nl2);
END LOOP;
end loop;
-- Free any resources associated with the document now it
-- is no longer needed.
dbms_xmldom.freeDocument(l_doc);
--remove file to another directory
--COMMIT; -- do not use the commit if you want to run this proc. from within the search_dir_list proc , because it execute a select from tmp table dir_list which contain a "on commit delete rows" clause.
/*EXCEPTION
/*WHEN OTHERS THEN
dbms_lob.freetemporary(l_clob);
dbms_xmlparser.freeParser(l_parser);
dbms_xmldom.freeDocument(l_doc);
null;
ROLLBACK; */
END;While trying to execute this i got:
ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00601: Invalid token in: 'soap:Envelope/soap:Body/GetFieldsNameResponse/GetFieldsNameResult/diffgr:diffgram/DataSet_FRM_GANERIC_PROP/FRM_GANERIC_PROP'
ORA-06512: at "XDB.DBMS_XSLPROCESSOR", line 939
ORA-06512: at "XDB.DBMS_XSLPROCESSOR", line 967
ORA-06512: at "MARKET.READ_XML_FILE_TEST", line 51
ORA-06512: at line 1
i guess i mised somthing at the line
l_nl := dbms_xslprocessor.selectNodes(dbms_xmldom.makeNode(l_doc),'soap:Envelope/soap:Body/GetFieldsNameResponse/GetFieldsNameResult/diffgr:diffgram/DataSet_FRM_GANERIC_PROP/FRM_GANERIC_PROP');i attached here part of my xml:
<?xml version="1.0" encoding="UTF-8" ?>
- <soap:Envelope xmlns:soap="http://www.w3.org/2003/05/soap-envelope" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
- <soap:Body>
- <GetFieldsNameResponse xmlns="http://tempuri.org/">
- <GetFieldsNameResult>
- <xs:schema id="DataSet_FRM_GANERIC_PROP" xmlns="" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
- <xs:element name="DataSet_FRM_GANERIC_PROP" msdata:IsDataSet="true" msdata:Locale="he-IL">
- <xs:complexType>
- <xs:choice minOccurs="0" maxOccurs="unbounded">
- <xs:element name="FRM_GANERIC_PROP">
- <xs:complexType>
- <xs:sequence>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:schema>
- <diffgr:diffgram xmlns:msdata="urn:schemas-microsoft-com:xml-msdata" xmlns:diffgr="urn:schemas-microsoft-com:xml-diffgram-v1">
- <DataSet_FRM_GANERIC_PROP xmlns="">
- <FRM_GANERIC_PROP diffgr:id="FRM_GANERIC_PROP1" msdata:rowOrder="0">
<L1>val1</L1>
<L2>val2</L2>
<L3>val3</L3>
<L4>val4</L4>
<L6>val6</L6>
</FRM_GANERIC_PROP>
</DataSet_FRM_GANERIC_PROP>
</diffgr:diffgram>
</GetFieldsNameResult>
</GetFieldsNameResponse>
</soap:Body>
</soap:Envelope>I Guess it somthing that have to do with node definition ,
but i have tried so many combinations and none ot those worked for me.
i'm deeply stuck here.
What do i miss here?
THANKS yair
Edited by: yair_k on 02:30 14/10/2010Hey , after got a lot of success with the xml reading part , i wonder if you
can help me with a problem while trying to reading that xml from a web service.
i use a procedure as followes:
FUNCTION read_from_web_service(in_username in varchar2 , in_password in varchar2)
RETURN CHAR
AS
l_service UTL_DBWS.service;
l_call UTL_DBWS.call;
l_a_ns VARCHAR2(32767);
l_wsdl_url VARCHAR2(32767);
l_namespace VARCHAR2(32767);
l_service_qname UTL_DBWS.qname;
l_port_qname UTL_DBWS.qname;
l_operation_qname UTL_DBWS.qname;
l_xmltype_in SYS.XMLTYPE;
l_xmltype_out SYS.XMLTYPE;
l_return VARCHAR2(32767);
BEGIN
l_wsdl_url := 'http://www.company.com/publisherService/ServiceGetpublisherTable.asmx?wsdl';
l_namespace := 'http://tempuri.org/';
l_service_qname := UTL_DBWS.to_qname(l_namespace, 'ServiceGetpublisherTable');
l_port_qname := UTL_DBWS.to_qname(l_namespace, 'ServiceGetpublisherTableSoap');
l_operation_qname := UTL_DBWS.to_qname(l_namespace, 'GetFieldsName');
l_service := UTL_DBWS.create_service (
wsdl_document_location => URIFACTORY.getURI(l_wsdl_url),
service_name => l_service_qname);
l_call := UTL_DBWS.create_call (
service_handle => l_service,
port_name => l_port_qname,
operation_name => l_operation_qname);
l_xmltype_in := SYS.XMLTYPE('<?xml version="1.0" encoding="utf-8"?>
<GetFieldsName xmlns="' || l_namespace || '">
<user>' || in_username || '</user>
<password>'|| in_password || '</password>
</GetFieldsName>');
l_xmltype_out := UTL_DBWS.invoke(call_Handle => l_call,
request => l_xmltype_in);
UTL_DBWS.release_call (call_handle => l_call);
UTL_DBWS.release_service (service_handle => l_service);
l_return := l_xmltype_out.extract('//GetFieldsName/text()').getstringVal();
dbms_output.put_line(l_return);
RETURN l_return;
END;but when i run it i got message:
ORA-29532: Java call terminated by uncaught Java exception: javax.xml.rpc.soap.SOAPFaultException: Server did not recognize the value of HTTP Header SOAPAction: .
regarding the line:
l_xmltype_out := UTL_DBWS.invoke(call_Handle => l_call,
request => l_xmltype_in);
So , i deeply stuck here!
my web service description is:
<?xml version="1.0" encoding="utf-8" ?>
- <wsdl:definitions xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tm="http://microsoft.com/wsdl/mime/textMatching/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="http://tempuri.org/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" targetNamespace="http://tempuri.org/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
- <wsdl:types>
- <s:schema elementFormDefault="qualified" targetNamespace="http://tempuri.org/">
- <s:element name="GetFieldsName">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="user" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="password" type="s:string" />
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="GetFieldsNameResponse">
- <s:complexType>
- <s:sequence>
- <s:element minOccurs="0" maxOccurs="1" name="GetFieldsNameResult">
- <s:complexType>
- <s:sequence>
<s:element ref="s:schema" />
<s:any />
</s:sequence>
</s:complexType>
</s:element>
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="GetMSG_ByUser_Not_Readed">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="user" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="password" type="s:string" />
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="GetMSG_ByUser_Not_ReadedResponse">
- <s:complexType>
- <s:sequence>
- <s:element minOccurs="0" maxOccurs="1" name="GetMSG_ByUser_Not_ReadedResult">
- <s:complexType>
- <s:sequence>
<s:element ref="s:schema" />
<s:any />
</s:sequence>
</s:complexType>
</s:element>
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="SetMSG_ByUser_Not_Readed_As_Readed">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="user" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="password" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="Rec_Id" type="s:string" />
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="SetMSG_ByUser_Not_Readed_As_ReadedResponse">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="1" maxOccurs="1" name="SetMSG_ByUser_Not_Readed_As_ReadedResult" type="s:boolean" />
</s:sequence>
</s:complexType>
</s:element>
</s:schema>
</wsdl:types>
- <wsdl:message name="GetFieldsNameSoapIn">
<wsdl:part name="parameters" element="tns:GetFieldsName" />
</wsdl:message>
- <wsdl:message name="GetFieldsNameSoapOut">
<wsdl:part name="parameters" element="tns:GetFieldsNameResponse" />
</wsdl:message>
- <wsdl:message name="GetMSG_ByUser_Not_ReadedSoapIn">
<wsdl:part name="parameters" element="tns:GetMSG_ByUser_Not_Readed" />
</wsdl:message>
- <wsdl:message name="GetMSG_ByUser_Not_ReadedSoapOut">
<wsdl:part name="parameters" element="tns:GetMSG_ByUser_Not_ReadedResponse" />
</wsdl:message>
- <wsdl:message name="SetMSG_ByUser_Not_Readed_As_ReadedSoapIn">
<wsdl:part name="parameters" element="tns:SetMSG_ByUser_Not_Readed_As_Readed" />
</wsdl:message>
- <wsdl:message name="SetMSG_ByUser_Not_Readed_As_ReadedSoapOut">
<wsdl:part name="parameters" element="tns:SetMSG_ByUser_Not_Readed_As_ReadedResponse" />
</wsdl:message>
- <wsdl:portType name="ServiceGetpublisherTableSoap">
- <wsdl:operation name="GetFieldsName">
<wsdl:input message="tns:GetFieldsNameSoapIn" />
<wsdl:output message="tns:GetFieldsNameSoapOut" />
</wsdl:operation>
- <wsdl:operation name="GetMSG_ByUser_Not_Readed">
<wsdl:input message="tns:GetMSG_ByUser_Not_ReadedSoapIn" />
<wsdl:output message="tns:GetMSG_ByUser_Not_ReadedSoapOut" />
</wsdl:operation>
- <wsdl:operation name="SetMSG_ByUser_Not_Readed_As_Readed">
<wsdl:input message="tns:SetMSG_ByUser_Not_Readed_As_ReadedSoapIn" />
<wsdl:output message="tns:SetMSG_ByUser_Not_Readed_As_ReadedSoapOut" />
</wsdl:operation>
</wsdl:portType>
- <wsdl:binding name="ServiceGetpublisherTableSoap" type="tns:ServiceGetpublisherTableSoap">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" />
- <wsdl:operation name="GetFieldsName">
<soap:operation soapAction="http://tempuri.org/GetFieldsName" style="document" />
- <wsdl:input>
<soap:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
- <wsdl:operation name="GetMSG_ByUser_Not_Readed">
<soap:operation soapAction="http://tempuri.org/GetMSG_ByUser_Not_Readed" style="document" />
- <wsdl:input>
<soap:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
- <wsdl:operation name="SetMSG_ByUser_Not_Readed_As_Readed">
<soap:operation soapAction="http://tempuri.org/SetMSG_ByUser_Not_Readed_As_Readed" style="document" />
- <wsdl:input>
<soap:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
- <wsdl:binding name="ServiceGetpublisherTableSoap12" type="tns:ServiceGetpublisherTableSoap">
<soap12:binding transport="http://schemas.xmlsoap.org/soap/http" />
- <wsdl:operation name="GetFieldsName">
<soap12:operation soapAction="http://tempuri.org/GetFieldsName" style="document" />
- <wsdl:input>
<soap12:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap12:body use="literal" />
</wsdl:output>
</wsdl:operation>
- <wsdl:operation name="GetMSG_ByUser_Not_Readed">
<soap12:operation soapAction="http://tempuri.org/GetMSG_ByUser_Not_Readed" style="document" />
- <wsdl:input>
<soap12:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap12:body use="literal" />
</wsdl:output>
</wsdl:operation>
- <wsdl:operation name="SetMSG_ByUser_Not_Readed_As_Readed">
<soap12:operation soapAction="http://tempuri.org/SetMSG_ByUser_Not_Readed_As_Readed" style="document" />
- <wsdl:input>
<soap12:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap12:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
- <wsdl:service name="ServiceGetpublisherTable">
- <wsdl:port name="ServiceGetpublisherTableSoap" binding="tns:ServiceGetpublisherTableSoap">
<soap:address location="http://www.company.com/publisherService/ServiceGetpublisherTable.asmx" />
</wsdl:port>
- <wsdl:port name="ServiceGetpublisherTableSoap12" binding="tns:ServiceGetpublisherTableSoap12">
<soap12:address location="http://www.company.com/publisherService/ServiceGetpublisherTable.asmx" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>also i have to mention that i have changed publisher references inside the code , and i also canot
supply username and password , so i guess you canot test it. still i not shure if my definitions (namespace est.) inside my code defined correctly.
hope you can help me with this.
regards
yair -
iTunes has tried to update itself and runs into an error and tells me to manually install. When I d/l and run the iTunesSetup.exe file I always encounter the following error message...
"A network error occured while attempting to read from the file C;|Windows|Installer|iTunes.msi" and iTunes does not update to iTunes 10.4.1.
Anyone know what is creating this error message? Thanks for the help...(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
I am using Adobe Reader with paid up service through May 2015. When I attempt to convert a file either to PDF or from PDF, I get the error message, "An error occurred while trying to access the service". What do I need to do to get access to the service I have paid for?
Hi DeaconTomColorado,
Please see "Error occurred when trying to access this service" when logging on to Acrobat.com.
Adobe has just released an update to Adobe Reader, so if you're accessing the service via Reader, please let us know whether the update helps resolve the issue.
Best,
Sara -
"An error occurred while trying to access the service" - Even after I have signed into Adobe reader
I have signed into adobe reader and I am trying to convert a PDF to a word document. All I get every time is, "An error occurred while trying to access the service" My account is active and paid for. Please help me with this. I have tried a number of different documents. I pay to use this service!
Thank you for your quik reply.
Please try to login at https://exportpdf.acrobat.com/signin.html with your Adobe ID and password. Please let me know this web UI does not work.
Thank you again
Hisami -
An error occurred while trying to connect to a Web service, when InfoPath web enabled form loads.
Hi Everyone,
I am getting an error message: An error occurred while trying to connect to a web service, when my InfoPath form tries to load. The last few days, it only spits this error message in the morning and around 12pm-1pm it resolves itself and the form loads
fine the rest of the day, oddly enough.
A few things about my form:
1). It is web enabled
2). The form submits to a form library on the SP server
3). I use the UserProfileService data connection in the form to auto-populate a few fields
4). I use a udcx file with correct language stored in the root of the site collection in the data connection library
5). The form has been working fine until a few days ago
I noticed while in Central Administration, that the User Profile Service Synchronization is Stopped. Not sure if this is causing some or all of the problem. If I need to start it I will need to contact my farm administrator to do this, since I do not
have the service account information.
Also, I looked thru the log files on the SharePoint server and found the following by searching for the Correlation ID shown when the error comes up, I won't put in everything just the important messages.
Schema file was already loaded: BuiltInActiveXControls.xsd
FormServer Partial Trust - Proxy operation invoked in the SHIM process.
FormServer Partial Trust - Invoking proxy operation for Web service adapter failed with exception Operation is not valid due to the current state of the object. for Url=https://<SP URL>/_vti_bin/UserProfileService.asmx
Data adapter failed during OnLoad: The custom code in the form cannot be run. This functionality may be deactivated on the server. For more information, contact the server farm administrator.
The following query failed: GetUserProfileByName (User: , Form Name: Expense Report, IP: , Connection Target: <SP URL>/Data Connections/GetUserProfileByName.udcx, Request: , Form ID: urn:schemas-microsoft-com:office:infopath:Expense-Report:-myXSD-2014-04-11T21-06-32
Type: DataAdapterException, Exception Message: The custom code in the form cannot be run. This functionality may be deactivated on the server.Hi B.,
You are on the right track. I recommend that you first get the User Profile Synchronization Service started because that itself could be the root cause of the issue.
If that doesn't fix it then focus your attention on the GetUserprofileByName data connection. I always use my secure store ID for this connection. I add the ID by editing the udcx file and then publishing it again.
Hope this helps.
Daniel Christian (MCTS) -
"An error occurred while trying to save your photo library..."
Installed iPhoto6.
Started app. It said it would take a few seconds or minutes to upgrade.
About 6 hours later after churning on thumbnails it is now claiming this error over and over with some time that goes by in between:
"An error occurred while trying to save your photo library."
"Some recent changes may be lost. Make sure your hard disk has enough space and that iPhoto is able to access the iPhoto Library folder."
It says I have 22,759 photos in Library. The Library was a subset of my images, named "iPhoto Library 2005" and it was intentionally kept below the 25,000 limit of iPhoto5.
Since Steve claims iPhoto6 can easily handle 250,000 photos, I clicked on the upgrade button with confidence. This now appears to be a mistake. Last night I was working on an iDVD for the local school and the majority of that work has simply vanished. There were 320 photos. I spent hours adding keywords, ranking, adjusting temperature, focus, exposure, etc.
Of the 320, only 16 photos survived. They are 16 in a row from the middle of the roll near the end but not at the end. The roll name was lost. The name is now just "Roll 226" and none of the photos have keywords. I know at least one of the 16 should have the keyword "DUPE" and the ranking 2 STARS since it precedes a double that I ranked 2 during a slideshow, sorted by ranking, and dragged to the DUPE keyword. All 16 should have the ACROCK keyword which I initially assigned to all photos.
Again, 304 of 320 have vanished and the 16 that remain have no keywords or rankings.
I watched the slide show in iPhoto5 three times with different music candidates so I know the keywording and rankings evaporated in iPhoto6. I also clicked ACROCK and option clicked DUPE and POOR so that all of the music program photos except dupes and poor images would vanish. I only deleted one photo so there were not a lot of changes to the library in terms of photos in it. I cannot think of any reason why the 16 chosen survived. Only two were placed in a DVD dropzone and they are scattered amongst the 16 survivors.
Also, the ACROCK and DUPE keywords are also gone while the POOR keyword added in August is in the keyword table just fine.
I exported these 320 photos last night to iDVD and tried almost all of the different themes and I dragged about 10 different photos to the dropzones, hit play, hit motion, etc.
It seems very strange that 16 photos from the middle of the pack would survive.
It seems extra odd that iPhoto5 and iDVD treated these as "established" photos, not photos hanging in the wings somewhere ready to vanish in an upgrade.
I gracefully saved and quit iDVD and iPhoto5 and there were no crashes and nothing strange happened while making the DVD. I was hoping today to try out the new themes and maybe find one that is just right for the kids. Instead, about 300 of 320 photos of the kids went bye-bye along with all the work on the photos!
I'm nervous that many more photos are missing but I will need to do a ton of checking to see what else has been deleted by the upgrade.
The user message that iPhoto6 presents is nearly useless and strange. It offers little if anything to go on in terms of a repair procedure. After saying an error has occurred, it says some recent changes could be lost but doesn't expand at all on what they may be or why.
From my experience, recently added photos, keywords, keyword assignments, rankings and maybe more can all be lost. To compound matters, before the upgrade it says that you cannot go back to the prior (working!) library in iPhoto5. Beware!
It finishes by suggesting two vague steps to take. The first is to make sure your disk has "enough" space. How much is "enough"? It doesn't say something like X GB available, Y GB needed. A user would have no clue about how much space to free up. I have over 17 GB and assumed that would be enough. I sure hope it doesn't require double the space of the existing library. I would hope it has a smarter algorithm than that since 23,000 photos at about 3 MB each maps to about 70 GB. That's a lot of "temporary" space to require to perform an upgrade. Since the upgrade/error message provide no details (unlike package installers which supposedly tell you how much space you need), users like me would have no clue if 70 GB is plenty or not enough.
I found 24 GB secretly used by iPhoto 5 for an iPod Photo Cache and a tech bulletin saying this just grows and grows without control and it can be deleted SO I wouldn't put huge hidden disk usage past iPhoto6.
The last none-to-helpful suggestion is that a user make sure that iPhoto is able to access the iPhoto Library folder. Huh?!??!?
Wouldn't this be a great thing to confirm via software before setting about on 6+ hours of work, especially if there is an error message hard-coded in the software confirming that Apple knows the result may be losing valuable customer photos and hours of work on enhancing, keywording, creating DVDs, etc.?
Of course. This appears negligent. To know that customer file loss will likely result but not checking these things out in advance before taking that risk seems like putting the cart before the horse at customers' expense & pain and certain loss of irreplaceable family photos (for the, say, 80%+ of iPhoto users that "plan" to get a backup routine established?).
I got burned in the iPhoto5 upgrade as well, losing photos, so I was sure to have a backup so it wouldn't happen again. Most I fear won't be so fortunate so be advised of the risk and work with copies of your photos only.
Also, why would iPhoto5 have all the permissions it needs to store, edit, tag and otherwise work with 320 photos added last night? Why would version 5 have plenty of permissions to use the folders and the photos in them. Why would iPhoto 6 suddenly lose those permissions or not have enough? This hardly makes any sense. The only way the permissions were set, the iPhoto libraries got created and the albums got created was by dragging a folder of images onto the albums pane in iPhoto5. So, iPhoto5 set all the permissions, everything is under one user account and there should be no surprise permissions for iPhoto6 to deal with.
It seems unbelievable that iPhoto 6 couldn't do what iPhoto 5 was doing. I never changed permissions and never touched files in the iPhoto 5 structure.
I can only guess that recently added keywords, recently added photos and recently added rankings and keyword taggings linger in some at-risk staging area that a version 6 upgrade doesn't know how to deal with. This seems like a lame way to code this app so I don't consider this a good guess but what else could it be?
Anyone else have a better hunch at a root cause?
Anyone else have an idea of a cure?
Anyone else run into this?
It sure doesn't look like there was a test case for having near 25,000 photos (an iPhoto 5 documented requirement), working with the latest roll and then doing a version 6 upgrade because it failed miserably--user data loss--without any special effort to find defects. In a former life I tested software and released software was much more difficult to break than this.
I would appreciate any other user experiences/solutions related to this problem. I am reluctant to import another 22,000 photos from iPhoto Library 2004 only to find more photos go poof without any rhyme or reason.
Thanks in advance for your help and I hope this alerts others to a potential for valuable photo loss (i.e., back up before you upgrade, verify iPhoto Library permissions--whatever that means--and have scads of disk space available assuming there's any truth to the error message!).
--Sam
G5 Dual 2.7 GHz 2 GB DDR SDRAM Mac OS X (10.4.4)I'll check if I have copies of copies of copies. This could take a while due to the number of files.
I picked up a brand new 300 GB Western Digital hard drive thinking 20GB or so was not enough for temp files for upgrading and/or importing.
I formatted it as a mac os extended, journaled drive, not case sensitive, one full-size partition. I started iPhoto6 with the option key. I had a CF in my other WD 300 GB (with media reader). iPhoto6 asked about the photos on the card. I told it not to download those (again). Because I was holding the option key down, iPhoto6 asked if I wanted to select a different library or create one. I created one on the brand new, 100% empty 300 GB drive. I'm not sure if/where iPhoto6 creates temporary/cache files (like iPhoto iPod Cache folder) as it sets up a new library. I was hoping the empty 300 GB drive would give it ample room to load an existing iPhoto5 library.
When I dragged an old iPhoto5 Library onto the new iPhoto6 Library Album pane. I saw the "Importing..." start and it went on and on and on and... I let it run for HOURS and HOURS. When I checked around midnight, it had crashed. When I started it again, it said it had run across some huge number of stray photos.
I have no idea why iPhoto6 would have trouble importing an iPhoto5 library that was below the 25,000 photo mark for 5. This is especially bizarre since iPhoto6 claims it supports 250,000 photos!
I'll be trying to figure out if these stray photos got imported as dupes, if they lost iPhoto5 keywords, etc. I fear something different but equally bad happened since the number of photos it came up with was like 79,000--again many stray photos that didn't make it into the first import for no known reason. Since libraries in iPhoto5 were around 25,000 or less, I'm not sure what's happening.
Maybe there's a cache or temp file still created on Macintosh HD and not on the empty new 300GB drive and a bug exists for imports when space on Mac HD is "low" (i.e., under 3.5 GB). Maybe it's seeing thumbs as files it should import? Maybe it's seeing Orig and Modified images as worthy of reimporting?
I had told it not to import dupes but who knows if it goes by file name, checksum, byte-for-byte comparison, etc.
I'm not sure if I can even pull up iPhoto5 and 6 at the same time now to scroll through the libraries to see if dupes, thumbs, original/modifies/etc. are showing up to boost the count from under 25K to 79K!
Ideas? At least I know I'm not the only G5 dual user with this problem!
--Sam
G5 Dual 2.7 GHz 2 GB DDR SDRAM Mac OS X (10.4.4)
G5 Dual 2.7 GHz 2 GB DDR SDRAM Mac OS X (10.4.4) -
An error occured while trying to copy the needed DB driver jar files
When I try to run my web app, I see this error in the Output window.
Creator will also put up a window essentially saying that I don't have a particular
data source. But I do have that very data source there.
The error seems to be pointing to this line in my build-impl.xml file
<nbdeploy debugmode="false" clientUrlPart="${client.urlPart}" forceRedeploy="${forceRedeploy}"/>I'm using postgresql-8.1-404.jdbc3.jar
I started this project with Creator2, so I don't know if the nbproject files
are out of date or anything.
Here's the output text:
init:
deps-module-jar:
deps-ear-jar:
deps-jar:
Copying 1 file to /home/tc/dev/oms/src
library-inclusion-in-archive:
library-inclusion-in-manifest:
Copying 1 file to /home/tc/dev/oms/build/web/WEB-INF/classes
load-project-properties:
installGraphics:
installLayouts:
compile:
compile-jsps:
pluto-hack-web-xml-run:
portlet-container-deploy:
jsCreatorDist:
run-deploy:
An error occured while trying to copy the needed DB driver jar files.
Deployment error: An error occured while trying to copy the needed DB driver jar files.. See the server log file for details.
Exception=Deployment error: An error occured while trying to copy the needed DB driver jar files.. See the server log file for details.
Deployment error: An error occured while trying to copy the needed DB driver jar files.. See the server log file for details.
at org.netbeans.modules.j2ee.deployment.devmodules.api.Deployment.deploy(Deployment.java:198)
at org.netbeans.modules.j2ee.ant.Deploy.execute(Deploy.java:75)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
at org.apache.tools.ant.Project.executeTargets(Project.java:1062)
at org.apache.tools.ant.module.bridge.impl.BridgeImpl.run(BridgeImpl.java:234)
at org.apache.tools.ant.module.run.TargetExecutor.run(TargetExecutor.java:242)
at org.netbeans.core.execution.RunClassThread.run(RunClassThread.java:125)
Caused by: An error occured while trying to copy the needed DB driver jar files.
at org.netbeans.modules.j2ee.deployment.devmodules.api.Deployment.deploy(Deployment.java:139)
... 10 more
/home/tc/dev/oms/nbproject/build-impl.xml:799: Deployment error: An error occured while trying to copy the needed DB driver jar files.. See the server log file for details.
BUILD FAILED (total time: 7 minutes 21 seconds) -
Get error when trying to upgrade to IOS5 - An error occured while trying to Back up ipad -402653138
Help
I am trying to upgrade to IOS5 and i cant get past the backup step of the upgrade - I keep getting An error occured while trying to Back up ipad (-402653138). I have tried removing my current backup and letting the update do the backup but still get same message.
I also get a warning right when I start the upgrade process that says I have purchased apps that have not been transfered and wants to know if I want to continue??? Not sure why I get this warning - I have ran the transfer purchases option several times and it seems to work. However, if I go under store and look at the purchases for my ipad it dosnt show any??? I would assume it should?
I have tried syncing and backing up, rebooting, all latest versions of itunes, etc.
Any ideas or help would be much appreciated.
Thanks
ErikI took a leap of faith and finally got the update with no issues. Here's what I did:
First did yet another backup. Next, disabled all anti-virus and anything related (running Norton 360). Next, turned off Home Sharing.
Instead of "Update" I selected "Restore". Followed prompts as though I wanted to restore and update. Selected my latest backup and off it went. First did the wipe, then ios5 update, then restarted and began to sync. Sync took about 2 hours as I have lots of apps, photos and some TV shows I forgot were on there.
In the end, I had the exact same configuration. All apps on their pages as before the update, all folders intact and even all game scores and data from apps. Hurray!
Now just going through the App update process of the many (85) that showed up in App Store icon.
Hope this helps! -
An error occurred while trying to start the Windows Deployment Services server
After rebooting the server, I cannot start the Windows Deployment Services anymore.
It worked perfectly before the reboot. When starting it manually these errors appear in the event log:
The Windows Deployment Services Server service terminated with service-specific error 1460 (0x5B4).
An error occurred while trying to initialize multicast manager. Windows Deployment Services server will be shutdown.
Error Information: 0x5B4
An error occurred while trying to start the Windows Deployment Services server.
Error Information: 0x5B4
This is on server standard beta 3.I have removed the server from the WDS, then I have uninstalled the role, rebooted, reinstalled the role.
When I started the WDS the server was back in there, but when I wanted to start the service I got the message "the windows deployment services configuration is corrupt". I have triggered these commands to reset this:
Code Snippet
wdsutil /Verbose /Progress /Uninitialize-Server
Windows Deployment Services Management Utility [Version 6.0.6001.16510]
Copyright (C) Microsoft Corporation. All rights reserved.
Tearing down server...
== Original server operational mode: Native ==
-> Resetting setup state
-> Disabling and resetting Windows Deployment Services services
-> Removing server BINL SCP
-> Removing Windows Deployment Services share at \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST
== Final server operational mode: Not Configured ==
The command completed successfully.
Then i did this command, but again it failed to start at the end.
Code Snippet
C:\Windows\system32>wdsutil /Verbose /Progress /Initialize-Server /REMINST:"c:\R
emoteInstall"
Windows Deployment Services Management Utility [Version 6.0.6001.16510]
Copyright (C) Microsoft Corporation. All rights reserved.
Setting up server...
-> Creating Windows Deployment Services installation tree
---> Creating Windows Deployment Services installation root at \\LH-AJGG6OZWH9Z4
.longhorn.office\c$\RemoteInstall
---> Creating Windows Deployment Services share at \\LH-AJGG6OZWH9Z4.longhorn.of
fice\REMINST
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Images
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Boot
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Boot\x86\Images
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Boot\ia64\Images
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Boot\x64\Images
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Boot\Fonts
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Tmp
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Mgmt
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\WdsClientUnattend
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Templates
-> Installing Windows Deployment Services files
---> Installing system files
---> Installing boot files for x86
---> Installing boot files for ia64
---> Installing boot files for x64
-> Updating registry
-> Configuring the TFTPD service
-> Configuring BINL SCP
Enabling Windows Deployment Services services...
Starting Windows Deployment Services services...
An error occurred while trying to execute the command.
Error Code: 0x41D
Error Description: The service did not respond to the start or control request in a timely fashion.
Anyone have an idea what could be the cause? I found this additional error in the event log, but distributed file system hasn't been installed since the beginning.
DFS could not access its private data from the Active Directory. Please manually check network connectivity, security access, and/or consistency of DFS information in the Active Directory. This error occurred on root REMINST. -
Error occurred while trying to refresh edit panel "SeqEdit.ba"
I've been working on a TestStand project for a while (my first) and lately I get the following error just by clicking on a different step (and any step thereafter, even the one I was previously on):
Error occurred while trying to refresh edit panel "SeqEdit.ba":
Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index
Closing TS seems to temporarily clear it out, but it will come back after a while.
Can anybody help me figure out what this is?
Thanks!Here are my answers to the last two posts.
When and what were you doing when this error first appeared?
I'm just developing an automated test, so there's a lot of going back and forth between different subsequences filling in gaps as I go.
Does this error cause your application to crash or hang?
Once it appears, it just continues to appear each and every time I click a different step. I can still develop, but it sure is a pain. It's faster to restart TestStand so it doesn't pop up again (hopefully).
When you said "closing TS seems to temporarily clear it out, but it will come back after a while", could you quantify the amount of time it would take this error to occur again?
I haven't timed it, but it seems to take several hours. I would suspect more that it's based on the number of times I'm clicking different VIs, but I have no hard evidence.
Your error may be due to a registry error. If that is the case, I would recommend backing up your project first and then try to repair the software. You can accomplish the repair by going into Add and Remove Software from Control Panel, selecting National Instruments in the program list, choose TestStand and click on Repair. You will need to have the install CD for this.
Ah, my favorite suggestion...
Do the VIs specified in a LV steps take a long time to load when you click on the LV steps?
I'm not sure what a long time to load is. The first time LabVIEW opens, it takes a while (~30 seconds). After that, the steps typically open in about a second. I sure wish I had an SSD.
Does the error first occur when you clicking on a different LV step or the step is calling a different type of module?
I'm working exclusively with the LabVIEW adapter and the built-in steps: mainly Wait, Additional Results, If Statements, and For Loops.
Do the VIs have cluster parameters? Yes.
Are the clusters expanded when you select a different step? I had noticed that sometimes they are open and other times they aren't any more. I tried just now and after expanding a few, they all seemed to be expanded. Then I went to another subsequence that makes some of the same VI calls and they were open to begin with, then not (~5-10 VIs clicked on). I went back to the first subsequence and they were no longer open. That's interesting, but what are you looking for here?
Does the the error occur when you are using the LabVIEW Run-Time or LabVIEW Development System?
I am using the LabVIEW Professional Development System with the version indicated in my first post.
Are you running any sequences when the error occurs?
I typically run the sequence several times when debugging to make sure that the DUT responds the way I want it to. But the error has only occurred when I'm developing while clicking on a different VI after some undefined amount of time (or number of clicks).
Is it possible for you to post the sequence with some of the VIs that reproduce the problem? The VI block diagrams can be empty. I would like to see what type of controls you are using. It's a decently large application so I'm not sure you want all my code and I'm not sure I'd be able to hand it over either. (DoD contract and such.) I have defined a few (3 or 4) strict type def controls that are passed as clusters within TestStand. Other than that, most of my calls are to bench-top instruments (SigGen, SpecAn, power supplies) and a PXI switch. The other is through an RS485 connection to talk to the DUT.
One other note: This error hasn't occurred since I posted (of course, right?), but I also haven't done as much back and forth clicking of VIs. I have a hunch that it was related to the sheer number of back and forth clicks between different VIs when I was trying to get the values to be uniform among similar calls when I was setting everything up (similar parameter names in subsequences created from custom data types). I hope that helps.
Thanks! -
Error while trying to retrieve data from BW BEx query
The following error is coming while trying to retrieve data from BW BEx query (on ODS) when the Characters are more than 50.
In BEx report there is a limitation but is it also a limitation in Webi report.
Is there any other solution for this scenario where it is possible to retrieve more than 50 Characters?
A database error occured. The database error text is: The MDX query SELECT { [Measures].[3OD1RJNV2ZXI7XOC4CY9VXLZI], [Measures].[3P71KBWTVNGY9JTZP9FTP6RZ4], [Measures].[3OEAEUW2WTYJRE2TOD6IOFJF4] } ON COLUMNS , NON EMPTY CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( [ZHOST_ID2].[LEVEL01].MEMBERS, [ZHOST_ID3].[LEVEL01].MEMBERS ), [ZHOST_ID1].[LEVEL01].MEMBERS ), [ZREVENDDT__0CALDAY].[LEVEL01].MEMBERS ) ........................................................ failed to execute with the error Invalid MDX command with UNSUPPORTED: > 50 CHARACT.. (WIS 10901)Hi,
That warning / error message will be coming from the MDX interface on the BW server. It does not originate from BOBJ.
This question would be better asked to support component BW-BEX-OT-MDX
Similar discussion can be found using search: Limitation of Number of Objects used in Webi with SAP BW Universe as Source
Regards,
Henry
Maybe you are looking for
-
How to connect to an other computer through the internet
Please who can help me with Desktop Remote control and connecting through the internet. I know a lot is written about it, but it is still confusing. So try to explain my situation: I have an MacBook pro with Desktop Remote Control 3 The other compute
-
Hi all, In my requirement i have a field as push button , now i require to put traffic lights on this push button.I am displaying alv grid through class cl_gui_alv_grid please help me with a sample code. regards, kushagra
-
Dear All: I have bought a new I phone mobile 16GB 3G, I connected to the internet. and some downloads occur. My phone pad stated to function improperly, so I forced to reset the device by: Settings --> general ---> Reset All Sitiings and contents. A
-
Where to best place SFX folder for Audition use?
Just downloaded several SFX and beds from ADOBE, where to place all these files so they'll be available for use in Audition? Is there a path on my MAC PRO latest OS that this folder should reside to be read by Audition? Thanks
-
AUR package not showing up with pacman -Qm
So, according with this topic, the OP couldn't find the chromium-pepper-flash package with pacman -Qm, but for me it shows up on the search (I have installed it from the AUR, with makepkg). Currently this package is located in the AUR. I wonder why t