How to configure admin server failover in weblogic
Hi all,
Can anyone please tell me how can I configure Admin server failover in weblogic.
Please guide!!
Hi,
From the word "Failover" this means you are doing Active-Passive configuration for weblogic Admin server. For Active-Passive clustering, without shared storage you can do it. But the domain directory should be on a storage mount point, when node -1 will do down the same mount point should be mounted to node2.
mark If this helps.
Thanks,
Kishore
Similar Messages
-
How to configure admin server (sol 9)
I want to configure admin server for my directory server. I could find a binary "ns-config" which asks for "port", "usr" and "ldap URL" but fails at the end with a fliker of some error "missing ..."
I need some help on the procedure to configure admin server.
Thanks
- BharatOn solaris 9, you might want to look at /usr/sbin/directoryserver this might help you.
-
Install/configure admin server after installing weblogic
I have installed weblogic generic 10.3 in my windows 7 professional machine and configured OIM. But I did not configure the Admin server. I tried starting the OIM & SOA server by using
C:\......\bin>startManagedWebLogic.cmd soa_server1 http://localhost:7001
but I got this error
Enter username to boot WebLogic server:weblogic
Enter password to boot WebLogic server:
<> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at http://localhost:7001.>
<> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>
SEVERE: Authentication of user weblogic failed because of invalid password
<> <Critical> <Security> <BEA-090403> <Authentication for user weblogic denied>
<> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication for user weblogic denied
weblogic.security.SecurityInitializationException: Authentication for user weblogic denied
So how do I install/configure the admin server. I am sure I am missing something simple. Any help would be appreciated. Thanks.You are checking at the wrong place.you need to check the same under DOMAIN_HOME which would be by default at $MIDDLEWARE_HOME/user_projects/domains/<<Your DOmain Name>>
e.g. if WL_HOME=/oracle/Middleware/wlserver_10.3
then
MIDDLEWARE_HOME=/oracle/Middleware
and DOMAIN_HOME=/oracle/Middleware/user_projects/domains/SOA_DOMAIN <---THere should be Domain Name folder existing>>
Under the domain folder you would be having startWebLogic.sh which is used to start the Admin Server.
And moreover under DOMAIN_HOME you would have config folder in which you would have config.xml where from you can check which all the server you have in your domain which you have created. -
Unable to start admin server service for weblogic (startWebLogic.sh) Linux
I installed ECM 11g on Linux 64-bit , installed weblogic 12
so when I try to start admin server service for weblogic (startWebLogic.sh) and following error its showing
I found solution to give full access permeation for the user , but it's still same issue
and i am triyng to start services from the users how installed the Weblogic and ECM
bash-4.1$ '/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/startWebLogic.sh' .
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=/home/ecm/Oracle/Middleware/oracle_common/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar:/home/ecm/Oracle/Middleware/patch_wls1211/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/ecm/Oracle/Middleware/patch_ocp371/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/lib/jvm/jdk1.6.0_33/lib/tools.jar:/home/ecm/Oracle/Middleware/wlserver_12.1/server/lib/weblogic_sp.jar:/home/ecm/Oracle/Middleware/wlserver_12.1/server/lib/weblogic.jar:/home/ecm/Oracle/Middleware/modules/features/weblogic.server.modules_12.1.1.0.jar:/home/ecm/Oracle/Middleware/wlserver_12.1/server/lib/webservices.jar:/home/ecm/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/home/ecm/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/home/ecm/Oracle/Middleware/oracle_common/soa/modules/commons-cli-1.1.jar:/home/ecm/Oracle/Middleware/oracle_common/soa/modules/oracle.soa.mgmt_11.1.1/soa-infra-mgmt.jar:/home/ecm/Oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrf.jar:/home/ecm/Oracle/Middleware/wlserver_12.1/common/derby/lib/derbyclient.jar:/home/ecm/Oracle/Middleware/wlserver_12.1/server/lib/xqrl.jar:/home/ecm/Oracle/Middleware/Oracle_ECM1/ucm/idc/jlib/idcloader.jar:/home/ecm/Oracle/Middleware/Oracle_ECM1/ucm/idc/components/NativeOsUtils/classes-NativeOsUtils.jar
PATH=/home/ecm/Oracle/Middleware/wlserver_12.1/server/bin:/home/ecm/Oracle/Middleware/modules/org.apache.ant_1.7.1/bin:/usr/lib/jvm/jdk1.6.0_33/jre/bin:/usr/lib/jvm/jdk1.6.0_33/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/home/ecm/bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://hostname:port/console *
starting weblogic with Java version:
java version "1.6.0_33"
Java(TM) SE Runtime Environment (build 1.6.0_33-b04)
Java HotSpot(TM) 64-Bit Server VM (build 20.8-b03, mixed mode)
Starting WLS with line:
/usr/lib/jvm/jdk1.6.0_33/bin/java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=AdminServer -Djava.security.policy=/home/ecm/Oracle/Middleware/wlserver_12.1/server/lib/weblogic.policy -Xverify:none -Djava.endorsed.dirs=/usr/lib/jvm/jdk1.6.0_33/jre/lib/endorsed:/home/ecm/Oracle/Middleware/wlserver_12.1/endorsed -da -Dplatform.home=/home/ecm/Oracle/Middleware/wlserver_12.1 -Dwls.home=/home/ecm/Oracle/Middleware/wlserver_12.1/server -Dweblogic.home=/home/ecm/Oracle/Middleware/wlserver_12.1/server -Dcommon.components.home=/home/ecm/Oracle/Middleware/oracle_common -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain -Djrockit.optfile=/home/ecm/Oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrocket_optfile.txt -Doracle.server.config.dir=/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/config/fmwconfig/servers/AdminServer -Doracle.domain.config.dir=/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/config/fmwconfig -Digf.arisidbeans.carmlloc=/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/config/fmwconfig/carml -Digf.arisidstack.home=/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/config/fmwconfig/arisidprovider -Doracle.security.jps.config=/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/config/fmwconfig/jps-config.xml -Doracle.deployed.app.dir=/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/servers/AdminServer/tmp/_WL_user -Doracle.deployed.app.ext=/- -Dweblogic.alternateTypesDirectory=/home/ecm/Oracle/Middleware/oracle_common/modules/oracle.ossoiap_11.1.1,/home/ecm/Oracle/Middleware/oracle_common/modules/oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dipm.oracle.home=/home/ecm/Oracle/Middleware/Oracle_ECM1 -Ducm.oracle.home=/home/ecm/Oracle/Middleware/Oracle_ECM1 -Dem.oracle.home=/home/ecm/Oracle/Middleware/oracle_common -Djava.awt.headless=true -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/home/ecm/Oracle/Middleware/patch_wls1211/profiles/default/sysext_manifest_classpath:/home/ecm/Oracle/Middleware/patch_ocp371/profiles/default/sysext_manifest_classpath weblogic.Server
<Sep 12, 2012 12:08:02 PM EEST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Sep 12, 2012 12:08:03 PM EEST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Sep 12, 2012 12:08:03 PM EEST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 20.8-b03 from Sun Microsystems Inc..>
<Sep 12, 2012 12:08:04 PM EEST> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for 13340309 Thu Feb 16 18:30:21 IST 2012
WebLogic Server Temporary Patch for 13019800 Mon Jan 16 16:53:54 IST 2012
WebLogic Server Temporary Patch for BUG13391585 Thu Feb 02 10:18:36 IST 2012
WebLogic Server Temporary Patch for 13516712 Mon Jan 30 15:09:33 IST 2012
WebLogic Server Temporary Patch for BUG13641115 Tue Jan 31 11:19:13 IST 2012
WebLogic Server Temporary Patch for BUG13603813 Wed Feb 15 19:34:13 IST 2012
WebLogic Server Temporary Patch for 13424251 Mon Jan 30 14:32:34 IST 2012
WebLogic Server Temporary Patch for 13361720 Mon Jan 30 15:24:05 IST 2012
WebLogic Server Temporary Patch for BUG13421471 Wed Feb 01 11:24:18 IST 2012
WebLogic Server Temporary Patch for BUG13657792 Thu Feb 23 12:57:33 IST 2012
WebLogic Server 12.1.1.0 Wed Dec 7 08:40:57 PST 2011 1445491 >
<Sep 12, 2012 12:08:06 PM EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING.>
<Sep 12, 2012 12:08:06 PM EEST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool.>
<Sep 12, 2012 12:08:06 PM EEST> <Notice> <LoggingService> <BEA-320400> <The log file /home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/servers/AdminServer/logs/AdminServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms, such as Windows.>
<Sep 12, 2012 12:08:06 PM EEST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to /home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/servers/AdminServer/logs/AdminServer.log00009. Log messages will continue to be logged in /home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/servers/AdminServer/logs/AdminServer.log.>
<Sep 12, 2012 12:08:06 PM EEST> <Notice> <Log Management> <BEA-170019> <The server log file /home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/servers/AdminServer/logs/AdminServer.log is opened. All server side log events will be written to this file.>
Sep 12, 2012 12:08:09 PM oracle.security.jps.internal.keystore.file.FileKeyStoreManager openKeyStore
WARNING: Opening of file based keystore failed.
<Sep 12, 2012 12:08:09 PM EEST> <Error> <Security> <BEA-090892> <The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.>
<Sep 12, 2012 12:08:09 PM EEST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.
weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1402)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:148)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.JpsRuntimeException: JPS-06514: Opening of file based keystore failed.
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:167)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:369)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.JpsException: JPS-06514: Opening of file based keystore failed.
at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPDPService(PolicyUtil.java:2855)
at oracle.security.jps.internal.policystore.PolicyUtil.getPDPService(PolicyUtil.java:3097)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:164)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:369)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.service.keystore.KeyStoreServiceException: JPS-06514: Opening of file based keystore failed.
at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.openKeyStore(FileKeyStoreManager.java:374)
at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.doInit(FileKeyStoreServiceImpl.java:104)
at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:76)
at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:66)
at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:157)
Truncated. see log file for complete stacktrace
>
<Sep 12, 2012 12:08:09 PM EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED.>
<Sep 12, 2012 12:08:09 PM EEST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down.>
<Sep 12, 2012 12:08:09 PM EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN.>
bash-4.1$Looks to be a cert or keystore issue. How do you have that setup?
-
Unable to start Admin server by using weblogic.admin utility
Hi,
I stoped the admin server by using weblogic.admin utility command as bellow.
java weblogic.Admin -url http://server1:8008 -username adminuser -password weblogic SHUTDOWN myserver
It stopped successfully. But while starting as below i am getting error. Kindly help me out.
java weblogic.Admin -url http://172.27.72.70:8008 -username adminuser -password weblogic START myserver
<Warning> <Net> <BEA-000905> <Could not open connection with host: server1 and port: 8008.>
Failed to connect to http://172.27.72.70:8008: Destination unreachable; nested exception is:
java.net.ConnectException: Tried all: '1' addresses, but could not connect over HTTP to server: 'star', port: '8008'; No available router to destination
Any suggestion is appreciated.
Thanks,Hi,
Thanks for your reply.
Yes, Node Manager has configured on Managed Server's host machine.
So can't we start admin server by using weblogic.admin utility if admin server is stopped?
Thanks, -
How to create a server through WLST ( Weblogic Scripting Tool ) ?
How to create a server through WLST ( Weblogic Scripting Tool ) ?
Thanks in advance...
SanjayHi Murugesh,
Thanks a lot for you reply..
I was able to create a server using create(). Is it possible to clone a server ?
When i create a server following tags is added to config.xml
<server>
<name>testServer_lab1</name>
<listen-port>43000</listen-port>
</server>
And if i do a clone through admin console, following is added to config.xml
<server>
<name>testServer2_lab1</name>
<machine xsi:nil="true"></machine>
<listen-port>7001</listen-port>
<cluster xsi:nil="true"></cluster>
<listen-address></listen-address>
<graceful-shutdown-timeout>120</graceful-shutdown-timeout>
</server>
If incase, cloning is not possible through WLST, can i add following
<machine xsi:nil="true"></machine>
<listen-port>7001</listen-port>
<cluster xsi:nil="true"></cluster>
<listen-address></listen-address>
<graceful-shutdown-timeout>120</graceful-shutdown-timeout>
under <server> tag which is created through WLST ?
I am using 9.2 version.
Regards
Sanjay -
How to configure http server in oracle 10g
Hi
I am configuring apex 3.2.1 on oracle 10g 10.2.0 I need help how to configure http server bec i did not find any Apache file or folder in 10g if it is then how .
ArshadHi
I use to configure only this in $ORACLE_HOME/forms/server/forms.conf (and restart ias):
AddType application/x-orarrp rrp_
AddType application/x-orarrp-text rrpt
AddType application/x-orarrp-ps rrpp
AddType application/x-orarrp-pdf rrpa
AddType application/x-orarrp-rtf rrpr
AddType application/x-orarrp-html rrph -
How to configure Proxy server on Solaris 10 - SPARC
Hi All
Please guide on how to configure Proxy server on Solaris 10 - SPARC ?
What tool should be used?Proxy configurations are most often done within the application software that needs that function and not necessarily done in the OS. That permits you to make very specific settings and not just generic global settings that could conflict with other software.
Can you tell us what research you have done on the topic?
For example, have you glanced through a Google search on "solaris web proxy" ?
If you are hoping to use a specific web server application your forum post might be better placed in a forum space for that software instead of in a general OS forum space. What application software will you be using? -
How to Configure Exchange server in EP6.0
Hi
How to configure mailing server in Portal
With Regards
AzharHi Azhar
You can specify your mail server on the Portal.
Go to System Administration -> System Configuration -> UM Configuration.
You will find a field there to specify your mail Server.
You may also have to specify this in the config tool of your WAS Server to enable email notification
Take a look at <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/07/9bda3d5ed05610e10000000a114084/frameset.htm">this</a> .
Hope that helps.
Best Regards
Priya -
How to configure SMTP server for osb 10.3.1
Hi All,
Can anyone share information on how to configure SMTP server for osb 10.3.1
and then how to send an email from osb 10.3.1
Thanks in Advance!!Thanks a lot!!
I configured the same way. When I am sending email to an account on the same domain as my SMTP server is the sending of email is successful. But its giving error when I am trying to send an emain to an account which is on different domain. It giving error as "Operation has been cancelled"
Please suggest something. -
How to configure portal server with the Backend Oracle database
Hi Portal Experts,
we are planning to install Netweaver 04s sp stack 9 full java edition with Oracle 8i on windows platform.
we have the installation docs of portal but we didn't have any idea about how to configure Portal server with the Backend Oracle database at the time of installation or after ost installation of portal.can anyone provide the documentation about this or guide me how to achieve this.
PLZ share ur views---your help would be highly appreciable.
Regds
Phani.HI
if you r working in Sap enterprise portal use for connection url
jdbc:sap:sqlserver://ilsql01.tlv.sap.corp:1433;DatabaseName=Northwind
ilsql01.tlv.sap.corp:1433 this is your portal url with port number
Northwind is your database name.
for dirver you need to give
com.sap.portals.jdbc.sqlserver.SQLServerDriver
in case if you r working on other than sap say windows along with oracle try to use
Connection URL as jdbc:oracle:<drivertype>:@<database>
Driver name as oracle.jdbc.driver.OracleDriver
ex jdbc:oracle:thick:@localhost:3036:mydb
Oracle implements two types of JDBC drivers:
Thick JDBC drivers built on top of the C-based Net8 client, as well as a Thin (Pure Java) JDBC driver to support downloadable applets. Oracle JDBC drivers are used to create JDBC applications to communicate with Oracle databases.
Oracle extensions to JDBC include the following features:
Data access and manipulation
LOB access and manipulation
Oracle object type mapping
Object reference access and manipulation
Array access and manipulation
Application performance enhancement
*************if the information is helpful to you please reward points************ -
How i configure the log4j.xml in weblogic server
hi
i write a new lg4j.xml and i put this in WEB-INF/classes,i deployed this jar in my remote server,but it not reflected. [i am not specify the server logs, we have some API's which is deployed in server for that API log files is configured using log4j.xml ]
i saw there is a option in weblogic - setDomain -LOG4J_CONFIG_FILE='here we give the path for log4j.xml'.I think it's only work for local machines not for the remote machines.
i don't know how to get a log files in weblogic serverTo use Quartz primarily within an application server environment,include the Quartz JAR within the enterprise application (.ear or .war file). However, if you want to make Quartz available to many applications then simply make sure it's on the classpath of your appserver.
You can also deploy it as a jar file or a library module as required.
Quartz depends on a number of third-party libraries (in the form of jars) which are included in the distribution .zip file in the 'lib' directory. To use all the features of Quartz, all of these jars must also exist on your classpath.
-Sandeep -
Configure directiry server failover for delegated admin schema 2
Hello,
I am using Delegated Admin for Schema 2 on solaris 9 sparc platform.
I want to configure directory servers failover for delegated admin.
Unfortunately I havent found any clue for the same.
Can anyone help me?
Regards,
Shujaat Nazir
Senior System Engineer
Cyber Internet Services, Pakistan
http://www.cyber.net.pkDifferent product.
Schema 1 used the old iPlanet Delegated Admin.
Schema 2 uses Delegated Admin, based on Identity Server.
As far as I know, failover is not in this product. -
How to configure JMS server in weblogic
Hi,
I want to configure JMS server in weblogic.So please send me needful link.
Regards
AnupHi Anup,
1. The first thing you have to do is create a filestore where messages will be stored. Look at the below link for more detailed instructions:
http://docs.oracle.com/cd/E23943_01/apirefs.1111/e13952/taskhelp/stores/CreateFileStores.html
2. Next create a JMS server. Look at the below link for more detailed instructions
http://docs.oracle.com/cd/E23943_01/apirefs.1111/e13952/taskhelp/jms_servers/ConfigureJMSServers.html
3. Now, create a JMS System Module to hold the JMS resources like Queues, Topics, Connection Factory, SAF agents etc..
http://docs.oracle.com/cd/E23943_01/apirefs.1111/e13952/taskhelp/jms_modules/modules/ConfigureJMSModules.html
4. Now, create a resource like connection factory OR queue etc.
http://docs.oracle.com/cd/E23943_01/apirefs.1111/e13952/taskhelp/jms_modules/modules/ConfigureJMSModuleResources.html
For now, lets stick to the basics and create a basic queue using the below documentation unless you exactly know what resource you want to create
http://docs.oracle.com/cd/E23943_01/apirefs.1111/e13952/taskhelp/jms_modules/queues/CreateQueues.html
5. You will also need to create a connection factory to use the resource. See below documentation
http://docs.oracle.com/cd/E23943_01/apirefs.1111/e13952/taskhelp/jms_modules/connection_factories/CreateConnectionFactories.html
Please go through the below JMS architecture diagram as well as documentation that will tell you what JMS on WebLogic is all about in terms of configuration
http://docs.oracle.com/cd/E23943_01/web.1111/e13738/overview.htm#i1084283
Arun -
How to configure a error queue for weblogic jms topic
Hi guys.
I want to configure a error queue for weblogic jms topic. Wanted: The message goes to error destination when messages have expired or reached their redelivery limit.
1. using jms transport configure proxy service:
Retry Count :3
Retry Interval:10
Error Destination: ErrorTopic
Expiration Policy: Redirect
I tried use the proxy service to consume message from the jms topic . and generation an error in the proxy message flow. But the message didn't goes into the error topic.
Any suggestions for this topic? Can anyone provide some helps or any useful links.
Thanks in advance.
MingzhuangMingzhuang
I want to configure a error queue for weblogic jms topic. Wanted: The message goes to error destination when messages have expired or reached their redelivery limit.
1. using jms transport configure proxy service:
Retry Count :3
Retry Interval:10
Error Destination: ErrorTopic
Expiration olicy: RedirectUnlike File/SFTP, JMS proxy service definition does not have the concept of Error Destination. To accomplish similar functionality go to JMSQ on (for which proxy is configured) server console (http://localhost:7001/console) and configure the Error Destination. Following URL will help in how to configure JMS Q.
http://edocs.bea.com/wls/docs103/ConsoleHelp/taskhelp/jms_modules/queues/ConfigureQueues.html
http://edocs.bea.com/wls/docs103/ConsoleHelp/taskhelp/jms_modules/queues/ConfigureQueueDeliveryFailure.html
I tried use the proxy service to consume message from the jms topic . and generation an error in the proxy message flow. But the message didn't goes into the error topic.If every thing is configured as per above step, then the after retries, the weblogic server will put the message into JMS topic configured. Your proxy will receive from this topic.
Let me know if we are not on same page.
Cheers
Manoj
Maybe you are looking for
-
my new iphone5s's earphone doesn't work which was bought from USA last month,probably it was cause by falling down on floor insidentally one day before I came back china , the problem is ,the china apple store didn't accept the free repaire even the
-
REST Support in HTTP BC?
Is REST (at least incoming) going to be supported by HTTPBC any time soon? -Sam
-
How to run batch file from oracle forms 9i
Hi everyone. i have a data in csv file. i want to upload it to my database. i am using sql loader for it. i have made a batch file which run the sql loader and transfer my data to database. How to run batch file from oracle forms 9i. when i press the
-
Error message when syncing mail
when I went to sync my iphone today this message appeared. itunes could not sync mail accounts to iphone. because an error occurred remapping record identifiers I do not know how to fix this error or what could be wrong... the iphone will not continu
-
- starting the collector without the option -v2 then when a instance start, the syslog shows Error 000104 : Connection reset by peer in Module rslgsend(027) - starting the collector with -v2 all works well i down loaded the latest rslgsend and rslg