How to configure JMS server in weblogic

Hi,
I want to configure JMS server in weblogic.So please send me needful link.
Regards
Anup

Hi Anup,
1. The first thing you have to do is create a filestore where messages will be stored. Look at the below link for more detailed instructions:
http://docs.oracle.com/cd/E23943_01/apirefs.1111/e13952/taskhelp/stores/CreateFileStores.html
2. Next create a JMS server. Look at the below link for more detailed instructions
http://docs.oracle.com/cd/E23943_01/apirefs.1111/e13952/taskhelp/jms_servers/ConfigureJMSServers.html
3. Now, create a JMS System Module to hold the JMS resources like Queues, Topics, Connection Factory, SAF agents etc..
http://docs.oracle.com/cd/E23943_01/apirefs.1111/e13952/taskhelp/jms_modules/modules/ConfigureJMSModules.html
4. Now, create a resource like connection factory OR queue etc.
http://docs.oracle.com/cd/E23943_01/apirefs.1111/e13952/taskhelp/jms_modules/modules/ConfigureJMSModuleResources.html
For now, lets stick to the basics and create a basic queue using the below documentation unless you exactly know what resource you want to create
http://docs.oracle.com/cd/E23943_01/apirefs.1111/e13952/taskhelp/jms_modules/queues/CreateQueues.html
5. You will also need to create a connection factory to use the resource. See below documentation
http://docs.oracle.com/cd/E23943_01/apirefs.1111/e13952/taskhelp/jms_modules/connection_factories/CreateConnectionFactories.html
Please go through the below JMS architecture diagram as well as documentation that will tell you what JMS on WebLogic is all about in terms of configuration
http://docs.oracle.com/cd/E23943_01/web.1111/e13738/overview.htm#i1084283
Arun

Similar Messages

How to configure JMS-Server to use username and password

Hi
Maybe this is a real stupid question, but please help me, I'm not very experienced using JMS:
I'm using JMS (provided by OC4J / Application Server 10.1.3). I configured a ConnectionFactory (without username and password) and a Queue and there is also a application, which successfully opens the JMS-Connections.
This works well as long as I do not provide a username und password in the ConnectionFactory (EnterpriseManager: OC4J/Admin/Services/JMS-provider...). If I do this, my application terminates with the following stacktrace:
javax.jms.JMSSecurityException: JMSServer[aplora2:12602]: failed to authenticate "myuser/mypassword", no such user.
 at com.evermind.server.jms.JMSUtils.make(JMSUtils.java:1034)
 at com.evermind.server.jms.JMSUtils.toJMSSecurityException(JMSUtils.java:1090)
 at com.evermind.server.jms.JMSServer.getJMSServer(JMSServer.java:1237)
 at com.evermind.server.jms.JMSServer.getJMSServer(JMSServer.java:1213)
 at com.evermind.server.jms.InContainerProxy.getJMSServer(InContainerProxy.java:93)
 at com.evermind.server.jms.EvermindConnection.<init>(EvermindConnection.java:103)
 at com.evermind.server.jms.EvermindQueueConnection.<init>(EvermindQueueConnection.java:62)
 at com.evermind.server.jms.EvermindQueueConnectionFactory.unprivileged_createQueueConnection(EvermindQueueConnectionFactory.java:98)
 at com.evermind.server.jms.EvermindQueueConnectionFactory.access$000(EvermindQueueConnectionFactory.java:42)
 at com.evermind.server.jms.EvermindQueueConnectionFactory$1.execute(EvermindQueueConnectionFactory.java:78)
 at com.evermind.server.jms.InContainerProxy.doSecureOp(InContainerProxy.java:157)
 at com.evermind.server.jms.EvermindQueueConnectionFactory.createQueueConnection(EvermindQueueConnectionFactory.java:75)
 at com.evermind.server.jms.EvermindQueueConnectionFactory.createQueueConnection(EvermindQueueConnectionFactory.java:66)
 at sam.model.messages.MessageManager.<init>(MessageManager.java:74)
where "myuser" and "mypassword" are the username and password I entered in the ConnectionFactory. (My Application certainly uses the same username and password)
I expected, that by entering username and password here I would configure my Queue to be protected by them. But obviously there are some very basic things I didn't understand. Can anyone give me a hint, how I can protect the (OC4J-) JMS-Server or the Queue by username and password?
Thanks for your help
Frank Brandstetter

Hey Frank -
Assuming you've set up users in the "Security Manager" for your application, you can specify what JNDI resources they can "read" (and thus also connect to) via the orion-application.xml file. Look at the following snippet from the orion-application.xml file:
 <namespace-access>
<read-access>
<namespace-resource root="jms/firstQueue">
<security-role-mapping impliesAll="false" name="jmsSecurity">
<user name="scooter"/>
</security-role-mapping>
</namespace-resource>
</read-access>
<read-access>
<namespace-resource root="delme">
<security-role-mapping impliesAll="false" name="jmsSecurity">
<group name="messagingUsers"/>
</security-role-mapping>
</namespace-resource>
</read-access>
</namespace-access>
This would say that only the user "scooter" that you've set up would have access to the Queue whose JNDI name begins with jms/firstQueue. Anyone you've set up and added to a messagingUsers group would have access to any Queues whose JNDI name begins with "delme". (I'm honestly not sure what exactly this line does: <security-role-mapping impliesAll="false" name="jmsSecurity">)
This is the only way I've found to limit access to a particular Queue.
HTH.
Scott

How to configure JMS queue on OC4J server. Development in JDeveloper 10G

Hi there,
I have to configure a JMS for an Asynchronous process in my Application which will be running in Oracle 10G Application Server. Development Environment is Oracle JDeveloper 10G.
I am facing a problem on how to configure JMS queue.
Steps Followed are:
in the <JDevloperHome>/j2ee/home/config
1. Made the new queue and connection factory's JMS entry in jms.xml.
2. Specifed the queue in oc4j-connectors.xml.
3. played around with application.xml
and tried all combinations, but the message producer always failed to lookup the queue.
Need help on the steps to follow so that the producer can post the message in the queue.
Also please help how to configure the MDB to listen to the queue.
Thanx and Regards
Subham

If you were dealing with Oracle 10g app server as opposed to standalone, I might be better able to help you.
One thing though, when you are configuring your MDB in the orion-ejb-jar.xml file, do not forget to specify attribute listener-threads, otherwise no matter how many beans you have in your MDB pool, only one bean will be listening to the queue. Many listener-threads equal to max number of beans in pool.

How to Configure JMS MQ In WeLogic?

Hello. I am new to this forum. Can anybody gives instructions on how to create or configure JMS MQ in WebLogic ?
Thanks.

I recommending starting by reading through the [ Integrating Remote JMS Providers | http://download.oracle.com/docs/cd/E12839_01/web.1111/e13727/interop.htm#JMSPG553 ] FAQ, in order to assess the various options.
You may also want to look at "[ Integrating WebSphere MQ 6 with BEA Weblogic Server 10 using Weblogic Server Foreign (JMS) Server feature | http://ibswings.blogspot.com/2008/02/integrating-mq-broker-6-with-bea.html ]".
If you need exactly-once (transactions), and the MQ server is on a different machine than WebLogic, then you will need to use the MQ Extended Transactional client from IBM (http://publibfp.boulder.ibm.com/epubs/pdf/csqzar00.pdf). I think IBM still requires a license for this client.
Finally, you might find some useful information in the following white-paper: "[ Integrating an Oracle Service Bus Cluster with an IBM WebSphere MQ Cluster in a Service-Oriented Architecture | http://www.oracle.com/technology/products/integration/service-bus/docs/osb-websphere-whitepaper.pdf ]".
Tom

How to configure User domain in Weblogic..........

How to configure User domain in Weblogic Application Server 8.1 from Command prompt on windows Xp?
Thanks in Advance.


You can use WLST or weblogic.Admin command. WLST is the recommended appraoch. Here are a few links for both of the above:


http://edocs.bea.com/wls/docs81/admin_ref/cli.html
http://e-docs.bea.com/wls/docs91/config_scripting/using_WLST.html
http://edocs.bea.com/wls/docs90/config_scripting/domains.html
http://dev2dev.bea.com/blog/hoos/archive/2005/09/what_no_wlst_1.html
http://dev2dev.bea.com/pub/a/2005/01/wlst_offline.html
http://dev2dev.bea.com/blog/hoos/archive/2005/10/environment_pro_1.html


Hussein Badakhchani
London Middleware

Edited by hoos at 01/07/2007 3:50 AM
Edited by hoos at 01/07/2007 3:51 AM

How to configure IIS webserver with weblogic so that I can invoke servlets without the .wlforward extension

How to configure IIS webserver with weblogic so that I can
invoke servlets without the .wlforward extension
As per the documentation iisforward.dll is registered as a filter and .wlforward
has also been
included as a special file type. However this requires me to key-in ".wlforward"
after my servlet name.
What I want is something like this
http://iis/MyServlet
Please help me find a solution to this
Thanks,
Rishi

I am able to invoke the servlet without the wlforward extension now.
However, now I am required to add /weblogic before the servlet
name otherwise it does not execute the pathtrim property.
I have tried with the pathprepend thing also.
Can we get rid of the /weblogic part also. I just want to execute
my servlet as http://iis/myServlet.
Your help in this regard is greatly appreciated...
Thanks..
"Rishi" <[email protected]> wrote:
>
Thanks for the reply Kumar.
I did follow the instructions as given in the Weblogic documentation
The documentation said to add iisforward.dll as a filter service
and register .wlforward as a special
file type to be handled by iisproxy.dll. For this,
while configuring the IIS server in the Home Directory tab
I added an extension ".wlforward" and the executable as
iisproxy.dll. Is this the way it should have been done...
I also modified the iisproxy.ini file as per the documentation.
I have added the WLForwardPath property and set it to /weblogic.
My server works fine when I give the url as
http://iis/myServlet.wlforward
but it does not work for
http://iis/myServlet and this is the way i'd want it to work.
Please tell me if I am missing something on the configuration part
and if there is something special that needs to be done. I shall
be grateful to you.
Kumar Allamraju <[email protected]> wrote:
http://e-docs.bea.com/wls/docs61/adminguide/isapi.html#101184
Rishi wrote:
How to configure IIS webserver with weblogic so that I can
invoke servlets without the .wlforward extension
As per the documentation iisforward.dll is registered as a filter
and
.wlforward
has also been
included as a special file type. However this requires me to key-in".wlforward"
after my servlet name.
What I want is something like this
http://iis/MyServlet
Please help me find a solution to this
Thanks,
Rishi

How to configure http server in oracle 10g

Hi
I am configuring apex 3.2.1 on oracle 10g 10.2.0 I need help how to configure http server bec i did not find any Apache file or folder in 10g if it is then how .
Arshad

Hi
I use to configure only this in $ORACLE_HOME/forms/server/forms.conf (and restart ias):
AddType application/x-orarrp rrp_
AddType application/x-orarrp-text rrpt
AddType application/x-orarrp-ps rrpp
AddType application/x-orarrp-pdf rrpa
AddType application/x-orarrp-rtf rrpr
AddType application/x-orarrp-html rrph

How to configure Proxy server on Solaris 10 - SPARC

Hi All
Please guide on how to configure Proxy server on Solaris 10 - SPARC ?
What tool should be used?

Proxy configurations are most often done within the application software that needs that function and not necessarily done in the OS. That permits you to make very specific settings and not just generic global settings that could conflict with other software.
Can you tell us what research you have done on the topic?
For example, have you glanced through a Google search on "solaris web proxy" ?
If you are hoping to use a specific web server application your forum post might be better placed in a forum space for that software instead of in a general OS forum space. What application software will you be using?

How to Configure Exchange server in EP6.0

Hi
How to configure mailing server in Portal
With Regards
Azhar

Hi Azhar
You can specify your mail server on the Portal.
Go to System Administration -> System Configuration -> UM Configuration.
You will find a field there to specify your mail Server.
You may also have to specify this in the config tool of your WAS Server to enable email notification
Take a look at <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/07/9bda3d5ed05610e10000000a114084/frameset.htm">this</a> .
Hope that helps.
Best Regards
Priya

How to configure SMTP server for osb 10.3.1

Hi All,
Can anyone share information on how to configure SMTP server for osb 10.3.1
and then how to send an email from osb 10.3.1
Thanks in Advance!!

Thanks a lot!!
I configured the same way. When I am sending email to an account on the same domain as my SMTP server is the sending of email is successful. But its giving error when I am trying to send an emain to an account which is on different domain. It giving error as "Operation has been cancelled"
Please suggest something.

How to configure portal server with the Backend Oracle database

Hi Portal Experts,
we are planning to install Netweaver 04s sp stack 9 full java edition with Oracle 8i on windows platform.
we have the installation docs of portal but we didn't have any idea about how to configure Portal server with the Backend Oracle database at the time of installation or after ost installation of portal.can anyone provide the documentation about this or guide me how to achieve this.
PLZ share ur views---your help would be highly appreciable.
Regds
Phani.

HI
if you r working in Sap enterprise portal use for connection url
jdbc:sap:sqlserver://ilsql01.tlv.sap.corp:1433;DatabaseName=Northwind
ilsql01.tlv.sap.corp:1433 this is your portal url with port number
Northwind is your database name.
for dirver you need to give
com.sap.portals.jdbc.sqlserver.SQLServerDriver
in case if you r working on other than sap say windows along with oracle try to use
Connection URL as jdbc:oracle:<drivertype>:@<database>
Driver name as oracle.jdbc.driver.OracleDriver
ex jdbc:oracle:thick:@localhost:3036:mydb
Oracle implements two types of JDBC drivers:
Thick JDBC drivers built on top of the C-based Net8 client, as well as a Thin (Pure Java) JDBC driver to support downloadable applets. Oracle JDBC drivers are used to create JDBC applications to communicate with Oracle databases.
Oracle extensions to JDBC include the following features:
Data access and manipulation
LOB access and manipulation
Oracle object type mapping
Object reference access and manipulation
Array access and manipulation
Application performance enhancement
*************if the information is helpful to you please reward points************

How to configure admin server failover in weblogic

Hi all,
Can anyone please tell me how can I configure Admin server failover in weblogic.
Please guide!!

Hi,
From the word "Failover" this means you are doing Active-Passive configuration for weblogic Admin server. For Active-Passive clustering, without shared storage you can do it. But the domain directory should be on a storage mount point, when node -1 will do down the same mount point should be mounted to node2.
mark If this helps.
Thanks,
Kishore

How to configure SSL for Oracle Weblogic Server

Hi,
Please help me to configure SSL in oracle weblogic server.
If possible, please provide step by step to configure SSL.

this should help
http://weblogic-wonders.com/weblogic/2010/05/19/configuring-ssl-on-weblogic-server-custom-identity-custom-trust/

Load balancing MQ 7.0 Foreign JMS Server and Weblogic 10 MDBs?

We have the following configuration and we are trying to troubleshoot what appears to be a load balancing issue.
We have 3 Solaris servers. Each Solaris server has two Weblogic managed servers running on it. There are a total of 6 managed servers in the Weblogic cluster.
MQ Series 7.0 is also installed on each Solaris server. The MQ queue managers are in a MQ cluster. Each queue manager has the same queues defined.
We have a foreign JMS Server configured on Weblogic that has destinations and a connection factory defined. There aren't many configuration options available for the connection factory. The destinations are bound to the queues defined on MQ using the MQ bindings file.
The MQ bindings file was generated using the TRANSPORT(BIND) mechanism. Each bindings file points to the queue manager running on that machine. So the 2 managed servers running on one machine are accepting messages from the queue manager on that machine.
The MDB's listenning for messages on the MQ queues are configured as follows in the weblogic-ejb-jar.xml:
<max-beans-in-free-pool>16</max-beans-in-free-pool>
We also created a custom work manager with min threads constraint=5 and max threads constraint=16. The dispatch-policy of all the MDBs is set to the custom work manager.
The open input count on each MQ queue managers shows up as 32 which is expected.
The default load algorithm on the cluster is round-robin.
When we run a load test (injecting 40 messages per second on one MQ queue), we notice that one managed server ends up being significantly loaded than the other. Each MQ queue manager in the MQ cluster receives approximately the same number of messages in the load test. But it seems like one managed server is preferred over the other in Weblogic.
What can be done to equally balance the load among the two managed servers on each Solaris server?
Thanks for the help.

Load balancing generally applies at determing how many consumer threads has to be created on each of the clustered queue instance. In that sense you have achieved perfect load balancing as your queue instances has the same no of consumer threads.
Once you have set 'x' consumer threads on a queue, it is upto messaging provider to decide which thread to deliver a particular message and you will hardly have any control over this. Since your 32 threads are listening on the same queue, MQ can select any thread for delivering the message and the behaviour could be non deterministic.
One option to change your design is to have a dispacther mdb which picks the messages off the MQ and then routes to a weblogic distributed destination and you can have your core mdb which does all processing listen to this distributed destination. You can enable load balancing when the disaptcher mdb routes the message to the distributed destination. Since dispatcher MDB is nothing more than a router, the unbalanced consumption off the MQ shouldn't seriously affect the server.

How to start managed server on Weblogic 9.1 Admin console with jRockit

I configured a new 9.1 domain with jRockit as the JVM. Under Server Start, I used -server -Xgcprio:pausetime -Xpausetarget=400ms -Xms:256m -Xmx:384m -Xns:81m -Xgcpause in the Argument field. When I tried to start the server, I am getting the following error:
<May 24, 2006 11:16:55 AM> <Info> <NodeManager> <Starting WebLogic server with command line: C:\bea\jrockit90_150_04\bin\java -Dweblogic.Name=jdevext -Dbea.home=C:\bea -Djava.security.policy=c:\bea\weblogic91\server\lib\weblogic.policy -Dweblogic.management.server=http://144.111.155.145:7001 -Djava.library.path=C:\bea\WEBLOG~1\server\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\bea\WEBLOG~1\server\native\win\32;C:\bea\WEBLOG~1\server\bin;C:\bea\JROCKI~1\jre\bin;C:\bea\JROCKI~1\bin;C:\bea\WEBLOG~1\server\native\win\32\oci920_8;C:\oracle\ora92\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\Program Files\ThinkPad\Utilities;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Support Tools\;C:\Program Files\Intel\Wireless\Bin\;C:\Program Files\ThinkPad\ConnectUtilities;C:\Program Files\QuickTime\QTSystem\ -Djava.class.path=C:\bea\weblogic91\server\lib\weblogic.jar;C:\bea\jrockit90_150_04\lib\tools.jar;c:\bea\weblogic91\server\lib\wamapps\commons-logging.jar;c:\bea\weblogic91\server\lib\wamapps\log4j.jar;c:\bea\weblogic91\server\lib\wamapps\xalan.jar;c:\bea\weblogic91\server\lib\wamapps\xercesImpl.jar;c:\bea\weblogic91\server\lib\wamapps\xml-apis.jar -Dweblogic.system.BootIdentityFile=C:\bea\user_projects\domains\jdev\servers\jdevext\data\nodemanager\boot.properties -Dweblogic.nodemanager.ServiceEnabled=true -Dweblogic.security.SSL.ignoreHostnameVerification=false -Dweblogic.ReverseDNSAllowed=false java -server -Xgcprio:pausetime -Xpausetarget=400ms -Xms:256m -Xmx:384m -Xns:81m -Xgcpause -verbose weblogic.Server >
<May 24, 2006 11:16:55 AM> <Info> <NodeManager> <Working directory is "C:\bea\user_projects\domains\jdev">
<May 24, 2006 11:16:55 AM> <Info> <NodeManager> <Server output log file is "C:\bea\user_projects\domains\jdev\servers\jdevext\logs\jdevext.out">
Usage: java [-options] class [args...]
(to execute a class)
or java [-options] -jar jarfile [args...]
(to execute a jar file)
where options include:
-jrockit to select the "jrockit" VM
-client to select the "client" VM
-server to select the "server" VM [synonym for the "jrockit" VM]
The default VM is jrockit.
-cp <class search path of directories and zip/jar files>
-classpath <class search path of directories and zip/jar files>
A ; separated list of directories, JAR archives,
and ZIP archives to search for class files.
-D<name>=<value>
set a system property
-verbose[:class|gc|jni]
enable verbose output
-version print product version and exit
-version:<value>
require the specified version to run
-showversion print product version and continue
-jre-restrict-search | -jre-no-restrict-search
include/exclude user private JREs in the version search
-? -help print this help message
-X print help on non-standard options
-ea[:<packagename>...|:<classname>]
-enableassertions[:<packagename>...|:<classname>]
enable assertions
-da[:<packagename>...|:<classname>]
-disableassertions[:<packagename>...|:<classname>]
disable assertions
-esa | -enablesystemassertions
enable system assertions
-dsa | -disablesystemassertions
disable system assertions
-agentlib:<libname>[=<options>]
load native agent library <libname>, e.g. -agentlib:hprof
see also, -agentlib:jdwp=help and -agentlib:hprof=help
-agentpath:<pathname>[=<options>]
load native agent library by full pathname
-javaagent:<jarpath>[=<options>]
load Java programming language agent, see java.lang.instrument
<May 24, 2006 11:16:57 AM> <Info> <NodeManager> <Server failed during startup so will not be restarted>

It looks like your command line is broken. You have:
java <lots of -Dprop=value> java <JRockit flags> weblogic.Server
That second "java" shouldn't be there.
-- Henrik

How to configure JMS server in weblogic

Similar Messages

Maybe you are looking for