How to configure default Printer Storage mode for specific user?

Dear all,
When we try to print something from the SAP, we can manually change the settings of the printing by clicking on the "Properties".
Inside the "Properties", there is a "Ouput Options", extend it, and we can see a field called "Storage Mode". In my screen, by default it is always "Print Only".
My question is, if the user A must to change the default to "Archive only", and this change only affect this user A, how can I do this ? O
Thanks in advance.

Eduardo,
Could be a long shot, but in the interest of helping you ... maybe the following ...
- get ABAPer to create a control table listing user
- add code in RSNASTZZ that says if entry in control table, then update NAST-TDARMOD with '2'
Let me know if this helps. If not please revert and will try again.
Thanks,
Jay

Similar Messages

  • How to configure automatic printing of picklist for an OBD?

    Hi Experts,
    Can you pleae let me know how to configure automatic printing of picklist for an OBD?
    Thanks,
    Shetty

    1. To see whether picking list (EK00) is generated:
    VL02n open the delivery -> menu bar -> extrax -> picking output . 
    Is EK00 there? If not, it means that EK00 is not generated for this delivery.
    If EK00 is green -> it means that it has been printed.
    If it's yellow -> it means that it hasn't been printed yet. Now you have to goto VL70 to print it.
    2. To generate a picking output for one delivery, you have to do:
    [1] In customizing of shipping point, (img -> enterprise structure -> defination -> logistics execution ->shipping point), you have to set picking output  (TVST-KSCHL).
    [2] Item is relevant for picking, and plant/storage location is not assigned to a warehouse.
    [3] Set default print parameter in customizing.  (IMG -> Logistics Execution -> Shipping -> basic function -> output control ->define print parameter -> V4 -> for you picking output type -> assign default print parameter to shipping point ).
    Edited by: Harry Wu on Jul 23, 2010 3:07 AM

  • Disable release flag in service entry sheet for specific users

    How can we disable the release flag for specific user/s in Service Entry Sheet(ML81N)?
    Can any one suggest?
    arjman

    Hi dear,
                In the ML81N T code, there is an object M_EINK_FRG Release code and code grp.
    leave it empty. and assign the Role to the user with whoom you dont want to release the SES.
    In this process the system will show you the green flag and also allow you to release the SES but when you will save it the system will give an Error Message about the Authorization.
    this will not allow the user to release the SES.
    Hope it Helps,
    Regards,
    Yawar Khan
    Edited by: 1234_abcd on Jan 21, 2011 12:40 PM

  • How to modify & use Printer Defination files for Character Mode Report

    How can use & modify printer defination files for changing formats & orientation in character mode report. I donot know how to use printer defination files I tried to set the system parameter (Desformat) but it doesn't work.

    I m also faced same problem that u face,
    If u want to make character mode report so plz follow these instructions:
    1. Set the properties of Report Name Node in Character Cell is Yes.
    2. Change the mode of the System Parameter Mode is Character.
    3. Goto the Layout---> Main Section Properties and set the Character Report Width and Height like 132 and 66
    4. Create Formula Column and write this code "RETURN(CHR(14));"
    5. Goto Layout Model and map this formula column into Header of the Body Like If ur Company Name is "ABC COMPANY" attached with field and map Formula Column.
    5. Goto Printer Definition File DFLT.prt open in NotePad and set width and hieght that u set in Main Section of Report.
    6. At Last u Run the Report with Some System Parameter or User Parameter and View as Character Mode Report.
    In My Case I used EPSON LQ2180 Printer
    So, U Ask More Qustion and u have more knowledge About character mode report Plz Mail me at this address.
    Shahid Shafi
    [email protected]

  • How to Set Default Printer Just for Safari

    I use 2 printers.
    One prints paper docs etc.  The other prints labels only.  When i want to print the labels I have to select that printer in the print dialogue in Safari every time.  Super annoying.
    IS there a way to set a gedault printer just for Safari?
    I tried using the localhost:641/admin method and all i get is Bad Request  (the localhost address i mention here is not the actual version as i cannot remember it now, but it was something like that)
    Using safari 6.0.2 and osx 10.8.2

    Please see these docs.
    How To Setup Default Printer for a User. [ID 153927.1]
    How to Set Up a Default Printer for a User Within Oracle Applications [ID 1018856.102]
    How To Define a Default Printer? [ID 1237254.1]
    How To Setup Default Printer For Applications [ID 184109.1]
    Thanks,
    Hussein

  • How to configure near-line storage for BI archiving?

    I have searched the web but failed to find any info.
    Would you please provide some link or blog here?  Thanks!

    Hi Diana,
                  If you solved your problem then Please tell how to configure Near Line Storage Connection. currently we have SAP BW 7.3 and Database Oracle 11. Do we need to install any NLS addon/Database or any setting we need to do at Database level to enable NLS in sap bw as i read some were that we need same third party tool for this.

  • How to configure multiple listeners to listen for the same instance.

    Hello everyone,
    I am running oracle database 11g and I want information regarding how to configure multiple listeners to listen for the same database instance. Actually I know how to configure more than one listener but the main thing that I am confused about is when we create listener.ora file, do we have to statically register the database instance with both the listeners or the instance will register itself with both the listeners.
    According to my knowledge the instance will register with the listener specified by LOCAL_LISTENER parameter and we cannot have more than one value for this parameter.
    Please only give detailed answers with example as I am tired of simple answers with details that I already know.

    Hello,
    Yes, it can make sense to have several listener for one Oracle instance. For instance you may have one listener for the applications another listener for DBA administration tasks as well as one listener dedicated to dataguard broker. It is not possible to have several listeners listening on the same IP and Port.
    By default the database try to automatically register to a listener on port 1521. To instruct the instance to register to a specifc list of listeners you can add in the init.ora the local_listener parameter with an alias definition:
    i.e
    local_listener=MY_SET_OFF_LISTENERS
    in your tnsname.ora add an entry called:
    MY_SET_OFF_LISTENERS_LOCAL= (ADDRESS_LIST=
    (ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1530))
    (ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1531))
    (ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1532))
    In this sample your instance will register to three listeners listening on respectively port 1530, 1531 and 1532
    If you want your clients can be balanced over the 3 listeners

  • How to set default print orientation in oracle reports 6i?

    Can anyone please help how to set default print orientation of Oracle Reports 6i? Currently document is printed in Portrait orientation, but I need to print it in Landscape orientation. Is this possible?

    It is solved now. Go to Layout Model -> Main Section, Press F4. In the property pallet select the Orientation that is required to be selected when print is taken for that report.

  • How to setup default print to landscape in Reportviewer (printmode activex)

    We have an ASP.NET (2008) application and use the ReportViewer Web Control to show a Crystal Report on the client browser.
       - We set the "PrintMode" property to ActiveX in order to print to the client's local printer.
       - We set up the Landscape in Crystal Report Page setup.
       - We also put  repdoc.PrintOptions.PaperOrientation = PaperOrientation.Landscape in the program.
    The problem is when the user clicks the print icon, the report prints in portrait, not landscape.
    Is there a solution for this or is this a software limitation?
    Thanks.

    How to setup default print to landscape in Reportviewer (printmode activex)
    Hi David,
    Yes, I tried that 1196969 solution first, but it didn't work.  I saw all the discussion in the below thread and it seems a product issue mention by you on Aug 6, 2008 3:19 PM
    CrystalReportViewer default PageOrientation  ASP.NET VS 2008
    I don't know if the fix works for CrystalReportWebFormViewer4 which is what we have on the web server. I put debug alert in the Javascript of the following file
    WindowsMicrosoft.NETv2.0.50727ASP.NETClientFilesCrystalReportWebFormViewer4crystalprinthost.html
    I can see the call goes to the file, but won't get to the window.dialogArguments.paperorientation condition.
    When I write out: window.dialogArguments.paperorientation; it pops up "undefined".
    Is there any updated solution for CrystalReportWebFormViewer4?
    Thank you!!

  • How to change default Current Flag values for SCD2?

    I'd be curious to find out how to change default Current Flag values for SCD2 (instead of 0/1 to use N/Y)
    Probably I can change IKM module .... is there another way?
    Thanks

    Hi,
    You need change the IKM. This values are hardcode in the IKM.
    You can create a new IKM and the values used are a options of the IKM.
    Regards
    Edited by: Uthred on May 18, 2009 4:27 PM

  • How to configure proxy services in OSB for Rest based services?

    how to configure proxy services in OSB for Rest based services implemented using Jersey (Rest).
    The Client need to contact OSB proxy servies by posting application/xml using jersey client and OSB proxy service will call the OSB business service.
    i would like to know how to get this request in OSB proxy service and send it to the business service and get the response back.

    I would suggest you refer to the below links:
    https://blogs.oracle.com/jeffdavies/entry/restful_services_with_oracle_s_1
    https://blogs.oracle.com/jamesbayer/entry/using_rest_with_oracle_service
    Hope this helps.
    Thanks,
    Patrick

  • How to configure the runtime and consolidation for a track in CMS.

    How to configure the runtime and consolidation for a track in CMS.
    I can see the track exists in CMS but the same doesnt pull up in the NWDS in the development configuration perspective.
    I compared the given track with the one which gets pulled up in NWDS. Theres something called runtime system and consolidation which isnt defined for the track which is invisible.
    Please advise , what are these required for. And how can we configure the same.

    The runtime systems are defined for a track to setup the Transport path for any code changes....the Consolidation system is usually defined as a Virtual system for the track and used for comparison and fixing any broken or Dirty DC's ....that means it's not used as a Runtime System for Deployment as compared to DEV,QAT and PROD used for Deployment...
    Hope it helps..
    Regards,
    Shikhil

  • How to configure an automatic vendor assignment for a purchase requisition

    hi guys,
    how to configure an automatic vendor assignment for a purchase requisition in sap
    Thanks in advance

    hi Swathi,
    Check these Links out
    http://help.sap.com/saphelp_erp2005/helpdata/en/75/ee11e655c811d189900000e8322d00/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/5e/372e3b7532394ce10000000a114084/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/4d/2b912a43ad11d189410000e829fbbd/frameset.htm
    Regards,
    Santosh

  • How to set the Data Synchronisation mode for ADF BC component?

    Hi All,
    How to set the Data Synchronisation mode for ADF BC component
    Thanks
    Raghavendra

    Can you clarify what you mean by the data synchronization mode?
    If you mean the Sync Mode, then in 10.1.3 you set this property by:
    1. Selecting your DataBindings.cpx file
    2. Expanding the "Data Control Usages" section in the structure window
    3. Selecting the ADFBC-based data control
    4. Setting the "syncMode" property in the property inspector.

  • How to configure default gateway Solaris 9

    How to configure default gateway using /etc/gateways file (NO /etc/defaultrouter).
    The line "net default gateway ip_router metric 1 passive" produce the following error message:
    in.routed: bad net "default" in /etc/gateways entry "net default gateway ip_router metric 1 passive"--cannot be default.
    With Solaris 8 is ok.
    Can you help me.

    you've probably worked this out by now, but this may help others;
    net 0.0.0.0 gateway x.x.x.x metric 1 passive
    * x.x.x.x = your gateway IP

Maybe you are looking for

  • Is it safe to re-install vm server - need help all envs down

    i raised another query about this but had no replies - I have also raised 2 SR's to know avail yet please help if you can: I added extra cpu's and mem to a vm server (the only one in a pool) - now nothing works if i try to rediscover the server it sa

  • HT204053 how do i authorize a computer to where i can download my music off the cloud?

    How do i authorize my computer to download music off of the cloud?

  • PASSIVATION ERROR ...

    hi ! i obtained this error message : Error Message: JBO-28020: Passivation error on collection SEMListeCritereVO, collection id 3, persistent id 9 Error Message: JBO-28006: Could not create persistence table PS_SEM1SuiviMarcheAM void com.evermind.uti

  • Still images resolution

    Hi everybody! I want to make a dvd of pictures (still images). I am cropping these from an iMovie project. I have two options: JPEG and PICT. Which is best? What is the difference in resolution? I don't think I will print them on photo-paper. Best Er

  • PA30 Create for Residence Status Infotype 0048

    Residence Status Infotype 0048 Using TCode PA30, I have entered infotype 0048 and clicked on create. I am unable to use the Create Icon without entering the Subtype. I am getting this message 'Residence Status (0048)' not permitted Message no. PG628