How to configure DSN in Linux for use in Essbase?

Hello everyone,
Can anyone help me out about how to create a DSN in Linux to load data from Oracle into Essbase?
Configuration:
Oracle 10g R2 installed on the same box as Essbase (11.1.1.1)
OS: RedHat Enterprise Linux 5.0
(Since no DSN is configured, I am getting an error "No data sources defined. Please create one to continue" every time I try the 'Open SQL' option in a rule file)
Thanks,
Sayantan

I am no expert on this subject, mind you, but I did recently work with Oracle support regarding an ODBC issue. My issue was primarily with a Teradata ODBC connection, but while we were looking at the .odbc.ini, he helped me fix my Oracle connection as well.
He mentioned that we were connecting with the 'Oracle Wire Protocol', and my Oracle ODBC description in .odbc.ini looks like below. I'm not sure what all the entries are, but I do know that Driver, Hostname, SID, and Portnumber are mandatory (there may be other mandatory entries as well, should be some documentation somewhere on it)
Here is my .odbc.ini definition for an Oracle Wire Transfer database connection
[LBR_FCT2]
QEWSD=39264
Driver=/opt/hyperion/common/ODBC/Merant/5.2/lib/ARora22.so
Description=Merant 5.2 Oracle
ApplicationUsingThreads=1
Hostname=ora-godev2a
SID=godev2a
PortNumber=6364
ArraySize=60000
CatalogIncludesSynonyms=1
CatalogOptions=0
DefaultLongDataBuffLen=1024
DescribeAtPrepare=0
EnableDescribeParam=0
EnableNcharSupport=0
EnableScrollableCursors=1
EnableStaticCursorsForLongData=0
EnableTimestampWithTimeZone=0
LocalTimeZoneOffset=
LockTimeOut=-1
LogonID=
OptimizeLongPerformance=0
Password=
ProcedureRetResults=0
UseCurrentSchema=1

Similar Messages

How to configure DSN in linux?

hi everyone,
i had install tomcat in linux os, i wonder how to configure DSN in order to access in database, im' only know how to configure in MSWindows but not linux, could anybody help
thanks in advance

It would probably be better to post this question in the JDBC forum, but what database and driver are you using?

How to configure Automatic Account Clearing for A/R

Hi,
Kindly advice me how to configure Automatic Account Clearing for A/R
The client requirement is
In A/R the customer accounts are not automatically clearing when a payment is posted for that account. We are still seeing all open items and all paid or cleared items when we go to FBL5N and select open items for viewing. Please make account clearing automatic for customer payments.
Thanks in advance
Sunitha

Hi,
Use T code OB74.
Maintain for your Chart Of Account, acct type "D", From and to customer accounts and then add the critera you want. Pls note you cannot define more than 5 criteria.
Then schedule the clearing program job F.13 in the background.
Cheers.

How to configure OraMTS to allow WCF using MSDTC access OracleDB On unix?

How to configure OraMTS to allow WCF using distributed transactions to access the ORACLE database On Linux/Unix ?
Env:
1. DB-tier node , ORACLE database (version: 11.2.0.1.0) on Redhat Linux server ;
2. middle-tier node ,Both the client, the MS DTC and Oracle MTS run on the same computer , Win7 x64 OS , installed .Netframework 4.0, ODP.net (ODAC112030), and configure the component services in a distributed transaction;
Has done the configuration:
1. ORACLE database on a Linux server (version: 11.2.0.1.0) has execute oramtsadmin.sql script;
2.ORACLE database on a Linux server (version: 11.2.0.1.0) has execute the following script, Creating an Access Control List (ACL);
BEGIN
-- Create the new ACL, naming it "OraMTSadmin.xml", with a description.
-- This provides the OraMTS administrative user e.g. MTSADMIN user FOO
-- the privilege to connect
DBMS_NETWORK_ACL_ADMIN.CREATE_ACL('OraMTSadmin.xml',
'Allow usage to the UTL network packages',
'ORAMTS', TRUE, 'connect');
-- Now grant privilege to resolve DNS names to the OraMTS administrative user
DBMS_NETWORK_ACL_ADMIN.ADD_PRIVILEGE('OraMTSadmin.xml' ,
'ORAMTS', TRUE,'resolve');
-- Specify which hosts this ACL applies to, in this case we are allowing
-- access to all hosts. if one knew the list of all Windows middle-tier,
-- these could be added one by one.
DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL('OraMTSadmin.xml','*');
END;
3. ORACLE database on a Linux server has set JOB_QUEUE_PROCESSES = 1000;
4. restart Oralce;
5.Test code as follows :
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using JetSun.Infrastructure;
using Microsoft.VisualStudio.TestTools.UnitTesting;
using JetSun.Infrastructure.ServiceModel;
using JetSun.DataModel.Cis;
using JetSun.TestFramework;
using System.IO;
using System.Data.EntityClient;
using System.Data.Objects;
using ConsoleApplicationTest;
using System.Transactions;
namespace Core.Tests
[TestClass]
public class EfOracleTest
public TestContext TestContext { get; set; }
[TestMethod]
public void GetEntities()
//string cn = "DATA SOURCE=HIS30;DBA PRIVILEGE=SYSDBA;PASSWORD=jetsun;PERSIST SECURITY INFO=True;USER ID=SYS;enlist=true";
string cn = "DATA SOURCE=HIS30;DBA PRIVILEGE=SYSDBA;PASSWORD=mtssys;PERSIST SECURITY INFO=True;USER ID=mtssys;enlist=true";
DbsSetting s = new DbsSetting(Dbs.IP, DbsProvider.Oracle, cn);
Runtime.SetDeploymentDir(TestContext.TestDeploymentDir);
File.Copy("E:\\VSTS\\MedicalHealth\\bin\\Debug\\DataModel.Cis.Oracle.dll", Path.Combine(TestContext.TestDeploymentDir, "DataModel.Cis.Oracle.dll"));
//File.Copy(@"E:\VSTS\MedicalHealth\DataModel\Oracle\DataModel.Cis\EdmDiagnose.csdl", Path.Combine(TestContext.TestDeploymentDir, "EdmDiagnose.csdl"));
//File.Copy(@"E:\VSTS\MedicalHealth\DataModel\Oracle\DataModel.Cis\EdmDiagnose.ssdl", Path.Combine(TestContext.TestDeploymentDir, "EdmDiagnose.ssdl"));
//File.Copy(@"E:\VSTS\MedicalHealth\DataModel\Oracle\DataModel.Cis\EdmDiagnose.msl", Path.Combine(TestContext.TestDeploymentDir, "EdmDiagnose.msl"));
File.Copy(@"D:\vsts_test\ConsoleApplicationTest\ConsoleApplicationTest\bin\Debug\Model1.csdl", Path.Combine(TestContext.TestDeploymentDir, "Model1.csdl"));
File.Copy(@"D:\vsts_test\ConsoleApplicationTest\ConsoleApplicationTest\bin\Debug\Model1.ssdl", Path.Combine(TestContext.TestDeploymentDir, "Model1.ssdl"));
File.Copy(@"D:\vsts_test\ConsoleApplicationTest\ConsoleApplicationTest\bin\Debug\Model1.msl", Path.Combine(TestContext.TestDeploymentDir, "Model1.msl"));
string connectionString = s.ToEdmConnectionString(typeof(EdmEncounter), false);
//// Initialize the EntityConnectionStringBuilder.
//EntityConnectionStringBuilder entityBuilder =
// new EntityConnectionStringBuilder();
////Set the provider name.
//entityBuilder.Provider = s.Provider.Provider;
//// Set the provider-specific connection string.
//entityBuilder.ProviderConnectionString = cn;
//// Set the Metadata location.
//entityBuilder.Metadata = string.Format(@"res://{0}/EdmDiagnose.csdl|res://{0}/EdmDiagnose.ssdl|res://{0}/EdmDiagnose.msl", "DataModel.Cis.Oracle, Version=3.0.0.0, Culture=neutral, PublicKeyToken=null");
//entityBuilder.Metadata = string.Format(@".\Model1.csdl|.\Model1.ssdl|.\Model1.msl", "DataModel.Cis.Oracle, Version=3.0.0.0, Culture=neutral, PublicKeyToken=null");
//connectionString = entityBuilder.ToString();
////using (Entities edm = new Entities(connectionString))
//// foreach (var item in edm.ENCOUNTERs.Take(10))
//// Console.WriteLine("{0}\t{1}", item.ENCOUNTERID, item.DISPLAYNAME);
//entityBuilder.Metadata = string.Format(@"res://*/EdmDiagnose.csdl|.\EdmDiagnose.ssdl|.\EdmDiagnose.msl", "DataModel.Cis.Oracle, Version=3.0.0.0, Culture=neutral, PublicKeyToken=null");
//entityBuilder.Metadata = string.Format(@"res://{0}/", "DataModel.Cis.Oracle, Version=3.0.0.0, Culture=neutral, PublicKeyToken=null");
connectionString = s.ToEdmConnectionString(typeof(EdmFeeInfo), false);
try
//using (TransactionScope tx = new TransactionScope())
using (TransactionScope scope = new TransactionScope(TransactionScopeOption.Required, new TimeSpan(0, 0, 30)))
//using (var dbcn = s.Provider.CreateConnect(connectionString))
using (EdmFeeInfo edm = new EdmFeeInfo(connectionString))
//edm.Connection.CheckOpen();
//using (edm.Connection.BeginTransaction())
foreach (var item in edm.FeeInfos.Take(100))
TestContext.WriteLine("{0}\t{1}", item.EncounterId, item.Amount);
item.Amount = item.Amount * -1;
edm.SaveChanges();
// using (EdmFeeInfo edm2 = new EdmFeeInfo(connectionString))
// edm2.Connection.CheckOpen();
// edm2.Connection.EnlistTransaction(Transaction.Current);
// foreach (var item in edm2.FeeInfos.Take(100))
// item.Amount = item.Amount * -1;
// edm2.SaveChanges();
// throw new NotImplementedException();
TestContext.WriteLine("-----------1---------------");
using (EdmFeeInfo edm = new EdmFeeInfo(connectionString))
foreach (var item in edm.FeeInfos.Take(100))
TestContext.WriteLine("{0}\t{1}", item.EncounterId, item.Amount);
throw new NotImplementedException();
catch (Exception ex)
TestContext.WriteLine((ex.InnerException ?? ex).Message);
TestContext.WriteLine("-------------2-------------");
using (EdmFeeInfo edm = new EdmFeeInfo(connectionString))
foreach (var item in edm.FeeInfos.Take(100))
TestContext.WriteLine("{0}\t{1}", item.EncounterId, item.Amount);
6. the test results are as follows:
4 125
4 835.45
4 3458
4 2350
4 200
4 100
4 300
4 123
4 234
无法列入分布式事务处理（Could not be included in the Distributed Transaction）
-------------2-------------
4 125
4 835.45
4 3458
4 2350
4 200
4 100
4 300
4 123
The main error message:无法列入分布式事务处理（Could not be included in the Distributed Transaction） , not use distributed transaction everything is normal.
My test environment MS DTC and Oracle MTS Recovery Service run on the same computer, but OracleMTSRecoveryService registry values under£º HKEY_LOCAL_MACHINE \ SOFTWARE \ Wow6432Node \ ORACLE \ OracleMTSRecoveryService ,not under HKEY_LOCAL_MACHINE \ SOFTWARE \ ORACLE,I do not know that there is no relationship.
Is not configured incorrectly?Who can help me, thank you very much!

Do you really have a requirement to push data from Oracle to Access rather than pulling data from Oracle to Access? It would be exceptionally unusual to push data from Oracle to Access.
Pushing from Oracle to Access would means that you want some Oracle process running that is updating Access. But you said that your Access database was on your "local desktop" which implies that it is not running on a server where it is always available. So that means that the Oracle process is going to regularly encounter (and report) errors because the Access database is not available. In turn, that's going to mean that your push process is either going to cause the underlying transaction to fail or it's going to mean that the push process is going to have to implement a fair amount of code to queue data to be pushed at a later date (and track all those changes) which is no small task. None of that seems particularly pleasant.
On the other hand, Access is designed to pull data from real relational databases like Oracle. That's the far more normal approach architecturally. It doesn't require an Oracle process, it doesn't generate errors on the Oracle database when the local desktop is down, etc.
And, of course, I'm assuming that introducing Access is even architecturally reasonable. Most organizations would be extremely hesitant to allow data from an Oracle database to get moved into Access because that quickly means that they lose control of the data from a security standpoint, that there are now multiple copies of the data floating around when changes & corrections are made, etc. That causes all sorts of headaches normally above and beyond the headaches that pushing from Oracle to Access would create.
Justin

How to configure oracle thin drivers for SUN APPLICATION SERVER

hi all,
I am working with EJB with oracle as back-end. I wants to know how to configure oracle thin drivers for the SUN APPLICATION SERVER. Please explain me breifly.
Advanced thanks to all the replies.
with regards,
/kumaraswamy.n

Kumaraswamy,
Did you try searching the Internet? Here are the results of my Internet search:
http://tinyurl.com/zo4gk
And one of the first hits in the list was this:
Deploying to a Sun Java System Application Server
Good Luck,
Avi.

How to configure Oracle Enterprise Manager for ASM RAC Database ?

Dears,,
We have two databases (Primary & Standby), each database has two instances
Database version: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit
How to configure Oracle Enterprise Manager for this environment ?
I need documentation for this please.
Many thanks & Regards,,

Assuming an agent is running on the servers you want to monitor,
navigate to the Agent home page (Via setup --> Agent)
When in the agent home page select 'Add Database'and press [Go]
Assuming yopur database now gets recognized, select the Configure icon and enter the password for dbsnmp.
When done, press [Ok] to return to the agent home page.
Regards
Rob
http://oemgc.wordpress.com

How to configure Workflow Notification Mailer for oracle alert in R12

Hi all....,
How to configure Workflow Notfication mailer for oracle Alert in R12. Please provide the complete steps.. Its urgent.. Plz help me..
Regards ,
Madhan

Duplicate thread (please post only once)
plz help me...!!!! Workflow Notification Mailer
plz help me...!!!! Workflow Notification Mailer

HT4191 iPhone Local Storage "My iPhone" - How do you create this folder for use by the Notes app on a iPhone or iPad? If I want to keep some notes only on my device and not in a cloud environment associated with an e-mail account.

iPhone Local Storage "My iPhone" - How do you create this folder for use by the Notes app on a iPhone or iPad? If I want to keep some notes only on my device and not in a cloud environment associated with an e-mail account. I've seen reference to the "My iPhone" local storage put no mention on how you create this folder or access this folder within the Notes app. I realize storing information in a local storage like this provides no syncing between other iDevices but that is exactly what I'm looking for. I'm running iOS7.0.4 on a iPhone 5S, and a iPad Air. Any help would be greatly appreciated.

If you go to Settings > Notes > Default Account you will see "On My iPhone" as the default account and the only choice if you have not enabled syncing Notes in Settings >iCloud or Settings > Mail, Contacts, Calendars. If you have enabled syncing you can still select "On My iPhone" as the default account. When you are in the Notes app you won't see any accounts listed if you have not enabled syncing because they are all in the On My iPhone account and that is the only place possible. It is not a folder that you create.

HT201365 how do i change the passcode for using my ipad that i created when installing find my iphone. the is different from my apple id and password

how do i change the passcode for using my ipad which i created when i set up findmyiphone. this is different from my apple id and password

On both your devices go to Settings>iCloud, then scroll down and click "Delete Account". You can then sign back in using your updated details.
Note: "Delete Account" will not delete data from iCloud, it will simply remove the account from your device.

How does one transfer CS5 actions for use with CS6?

CS6 installation, which was uneventful, has transferred none of my actions from my copy of CS5. The CS5 actions are located in the actions folder of the APPLICATION/PHOTOSHOP CS5/PRESETS/ACTIONS. The "actions" folder in application support/adobe in my library is empty, and has always been so.
Only the CS6 default actions are located in the same folder for CS6.
I use imac i7, lion.
Note that i also have CS3 and CS4 on my machine. This due to recent upgrade to CS5 and recent upgrade to LION, and my general paranoia.
Must i load each action into CS6, one at a time?
thanks to any and all.
vince

Re: how does one transfer CS5 actions for use with CS6?
On a Mac - There are multiple ways to do this. I have done them both ways. In order to do this you need to know where you have your actions stored, and you can move them all at once if you have them stored in the same location.
1. You can load an action ONE AT TIME into your actions palette by:
     A. Open up the action palette and click on the little arrow with 4 little horizontal lines next to it on the upper right corner of the actions palette.
     B. Select "Load Actions" and a Finder window will open up and you can search your computer through this window for your actions.
     C. Click on the action from the Finder window then click 'Open' at the bottom right of the finder window.
     D. To save these so that they appear every time you open up your actions palette, go back to the little arrow at the top right of the actions palette and when the drop down window opens- click on 'Save Actions'. It will select the location where the          actions are currently stored as the place to save them. If you want to change that path, you can do it at this time in the little path window. I just leave it, since I keep all my actions stored in the same file.
2. TO MOVE MULTIPLE ACTION SETS AT ONCE
     A. Open up CS6 (or CS5) and move the Photoshop workspace it to the right side of your computer screen so you can see your desktop on the left side.
     B. Open up your Finder search window from your dock (the square blue head icon thingy for those who are new to photoshop). Move this to the left side of your screen so you can see the Photoshop work space on the right and the Finder window          on the left. In the Finder window, navigate to the file where all your actions are stored, select all the actions in the file (command+A will select everything in the file if you are actively inside the open file) or you can select multiple files           individually by continuously holding down the command key and clicking on the different actions you want to move.
     C. With the Photoshop workspace visible on the right, and the actions palette open so you can see that the actions actually transferred - In the Finder window, click the selected actions you want to load and drag them over to the Photoshop           workspace. I did this without an image open, I just dragged them onto the empty workspace. The actions should all appear immediately in the actions palette that is open.
     D. To save these so that they appear every time you open up your actions palette, go back to the little arrow at the top right of the actions palette and when the drop down window opens click on 'Save Actions'. It will select the location where the           actions are stored as the place to save them. If you want to change that path, you can do it at this time in the little path window. I just leave it, since I keep all my actions stored in the same file.
I hope this helps.
and I hope there are no typos.

How i can unblock my iphone for use in mexico?

how i can unblock my iphone for use in mexico?

Only your carrier can unlock a phone - Apple and you can't. See them.

HT1923 I backed up my iPad on my laptop with iTunes. I want to remove and re-install iTunes. How do I preserve the backup for use after I re-install iTunes?

I backed up my iPad on my laptop with iTunes. I want to remove and re-install iTunes. How do I preserve the backup for use after I re-install iTunes?

The device backups and iTunes library should be unaffected by uninstalling and reinstalling iTunes.
See Troubleshooting issues with iTunes for Windows updates for more...
tt2

How to configure internet domain name for P6 website using weblogic

After installing and configuring weblogic for P6 you get the following address https://servername:7002/console/login/LoginForm.jsp to access P6 website. Anyone know how to configure a purchase domain such as www.mydomain.com have it redirect to https://servername:7002/console/login/LoginForm.jsp Is this configured in weblogic server? If not, what is needed to redirect the purchased domain?

HI
You could have that domain resolving to/by some DNS servers and set up a load balancer / proxy to redirect every incoming request to that domain / site to your weblogic console.
however , what is it you are trying to do? It is very unsual of redirecting/ using Domain names to redirect to wls consoles.
could you explain your use case in detail please
Sri

How to configure DHCP on linux jumpstart for solaris installation

I have configured jumpstart on linux and able to install solaris on SUN sparcs
using rarp and bootparams files.now im trying to use linux DHCP for solaris clients. I have the done the DHCP setup on linux using this doc http://www.sun.com/bigadmin/content/submitted/setup_dhcp.jsp.
but when im trying to boot the sun spac client with boot net:dhcp - install command it is failing with error "panic - boot: Could not mount filesystem.
Program terminated". exports file is ok and NFS service is also running.
Please help me on this issue.
Thanks in advance.
Shashi

Darren,
Thanks for the response.
I tried to install client60001dev (sparc client) from server60060pxe (linux jumpstart) as follows
client60001dev is able to get the IP address from server60060pxe DHCP and then the boot file also, but after that the client is not showing any NFS queries.
{0} ok boot net:dhcp - install
Boot device: /pci@1f,4000/network@1,1:dhcp File and args: - install
Using Onboard Transceiver - Link Up.
Timeout waiting for BOOTP/DHCP reply. Retrying ...
Timeout waiting for BOOTP/DHCP reply. Retrying ...
2aa00
Server IP address: xx.xx.xx.119
Client IP address: xx.xx.xx.111
Subnet Mask : 255.255.255.0
Using Onboard Transceiver - Link Up.
panic - boot: Could not mount filesystem.
Program terminated
tcpdump on server60060pxe
03:16:12.292836 IP server60060pxe.42445 > client60001dev.20759: UDP, len
gth 516
03:16:12.303646 IP client60001dev.20759 > server60060pxe.42445: UDP, len
gth 4
03:16:12.303669 IP server60060pxe.42445 > client60001dev.20759: UDP, len
gth 516
03:16:12.314479 IP client60001dev.20759 > server60060pxe.42445: UDP, len
gth 4
03:16:12.314501 IP server60060pxe.42445 > client60001dev.20759: UDP, len
gth 516
03:16:12.325313 IP client60001dev.20759 > server60060pxe.42445: UDP, len
gth 4
03:16:12.325347 IP server60060pxe.42445 > client60001dev.20759: UDP, len
gth 516
03:16:12.336158 IP client60001dev.20759 > server60060pxe.42445: UDP, len
/var/log/messages on server60060pxe
Feb 26 03:15:35 server60060pxe dhcpd: DHCPDISCOVER from 08:00:20:fe:4a:23 via eth0.
369
Feb 26 03:15:35 server60060pxe dhcpd: DHCPOFFER on xx.xx.xx.111 to 08:00:20:fe:4
a:23 via eth0.369
Feb 26 03:16:08 server60060pxe dhcpd: Dynamic and static leases present for 139.185
.168.111.
Feb 26 03:16:08 server60060pxe dhcpd: Remove host declaration client60001dev or remove
139.185.168.111
Feb 26 03:16:08 server60060pxe dhcpd: from the dynamic address pool for xx.xx.xx
/24
Feb 26 03:16:08 server60060pxe dhcpd: DHCPREQUEST for xx.xx.xx.111 (xx.xx.xx.
119) from 08:00:20:fe:4a:23 via eth0.369
Feb 26 03:16:08 server60060pxe dhcpd: DHCPACK on xx.xx.xx.111 to 08:00:20:fe:4a:
23 via eth0.369
Feb 26 11:16:09 server60060pxe in.tftpd[10266]: RRQ from xx.xx.xx.111 filename 8
BB9A86F
Feb 26 03:22:00 server60060pxe kernel: eth0.369: dev_set_promiscuity(master, -1)
Feb 26 03:22:00 server60060pxe kernel: device eth0 left promiscuous mode
Feb 26 03:22:00 server60060pxe kernel: device eth0.369 left promiscuous mode
Shashi

How to configure Java Plug-In to use Firefox keystore

Does any one know how to configure Java Plugin 1.5.0 to use the Firefox kesystore either in Windows or in Linux environments?
I installed and configured 'JSS' based on the information available at http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/keystores .html.
but still the plugin is not using the keys from Firefox keystore.
I noticed the following messages in Java Console.
security: Accessing keys and certificate in Mozilla user profile: null
security: JSS is not configured
Thanks

I was having this same issue prior to installing the JSS on my machine.
I did not compile my own version of the code, but rather I took the jss34.jar file and put it in a 'jss' directory.
I also copied the jss3.dll and jss3.lib files into the directory where Firefox was installed.
That was all I had to do to get JSS to work for Firefox 1.0.4 and Mozilla 1.7.8.
If that still does not work for you, you always have the option to use the Java Plugin keystore instead of using the browser cache to authenticate certificates.
You can do that by doing the following on the Java Control Panel:
1. Click the 'Certificates' button on the Security tab
2. Import the certificate as a 'User' certificate (Make sure you select the appropriate certificate type)
3. Disable the 'Use certificates and keys in browser keystore' option under the 'Security' section of the 'Advanced' tab.
I hope that helps.

How to configure DSN in Linux for use in Essbase?

Similar Messages

Maybe you are looking for