How to configure internet domain name for P6 website using weblogic

After installing and configuring weblogic for P6 you get the following address https://servername:7002/console/login/LoginForm.jsp to access P6 website. Anyone know how to configure a purchase domain such as www.mydomain.com have it redirect to https://servername:7002/console/login/LoginForm.jsp Is this configured in weblogic server? If not, what is needed to redirect the purchased domain?

HI
You could have that domain resolving to/by some DNS servers and set up a load balancer / proxy to redirect every incoming request to that domain / site to your weblogic console.
however , what is it you are trying to do? It is very unsual of redirecting/ using Domain names to redirect to wls consoles.
could you explain your use case in detail please
Sri

Similar Messages

Is there a limit to how many pages i can have for one website using muse/business catalyst?

is there a limit to how many pages i can have for one website using muse/business catalyst?

Thank you. I've been searching everywhere and I couldn't find anything the mentioned it. I appreciate the feedback!

How to set same domain name for Azure Storage and Hosted Service

I have a web application running on azure and using azure storage with blob. My application allows to edit html files that are in the azure storage to save with another name and publish them later. I am using javascript to edit the html content that
I display in an Iframe but as the domain of my web application and the html that I try to edit are not the same, I got and this error "Unsafe JavaScript
attempt to access frame with URL "URL1" from frame with URL "URL2". Domains, protocols and ports must match".
I have been doing some research about it and the only way to make it work is to have the web application and the html that I want to access using javascript under the same domain.
So my question is: is it possible to have the same domain name in azure for the hosted service and the storage.
Like this:
hosted service: example.com
storage: example.com
By the way I already customize the domain names so they looks like this:
hosted service <mydomainname>.com
storage <blob.mydomainname>.com
Actually I have my application running in another hosting and I have no problem there since I have a folder where I am storing the files that I am editing so they are in the same domain as the application. I have been thinking in to do the same with Azure,
at least to have a folder where I can store the html file meanwhile I am editing it but I am not sure how much space I have in the hosted service to store temporary files.
let me know if you have a good tip or idea about how to solve this issue.

Hi Rodrigo,
Though both Azure Blob and Azure applications support custom domain, one domain could have only one DNS record (in this case is CNAME record) at one time. For Steve's case, he has 3 domains, blog.smarx.com, files.blog.smarx.com and cdn.blog.smarx.com.
> I would like to find a way to storage my html page that I need to edit under the same domain.
For this case, a workaround will be adding a http handler in your Azure application to serve file requests. That means we do not use the actual blob url to access blob content but send the request to a http handler then the http handler gets the content
from blob storage and returns it.
Please check
Accessing blobs in private container without Shared Access Secret key for a code sample.
Thanks.
Wengchao Zeng
Please mark the replies as answers if they help or unmark if not.
If you have any feedback about my replies, please contact
[email protected]
Microsoft One Code Framework

IWeb domain name for new website?

Hello!
I am new to iWeb and have created a website and now have questions about publishing it. The site I am creating is a replacement for an existing website that I did not make. I want the domain name to be the same as the existing site (cscfarm.com) and just to replace the old one with mine. Now, I would rather not join mobile me because I don't want the confusing url name and I already have permission to use cscfarm.com. My question is, do I have to get the FTP address from the person that currently runs the website? And if so, since I am using iWeb '08, how/where do I enter the FTP address to publish the website? I know that if I had '09 or higher I could do it through iWeb but I believe '08 is different. Am I going to need professional help for this or should I just get iLife '11 OR is it really not as hard as it seems? Any help/suggestions is appreciated!! Thanks so much!

Hi There,
BC does NOT host your domain.
You will need to keep it with your current Domain Registra or transfer it to another domain registra if you wish to close your account with Weebly. This has nothing to do with BC.
The EPP code is just a means to veritfy ownership of the domain and ensure such a transfer is approved by the owner of the domain.
In terms of BC all you do in the domain manager is to point all traffic or just web traffic to BC depending on your requirements/use of email etc.

How to configure request manager service for multiple website in one web application

I have set up sp 2013 as below:
web application : wa1
site collection : sc1
sp site: site1, site2
I used 2 WFE, 1 APP, how can I use request manager service to control site1 to wfe1, site2 to wfe2?
Awen

That's not what i'd describe as load balancing.
A better description would be load-isolation. In your description then if the load on site1 was large (and growing) but site2 was quiet then site1 would struggle and eventually become unable to handle the number of users but site2 would still be ok. That's
fine from a QOS point of view but it's not the norm for load balancing. It would work in simple scenarios but the out of the box load balancing tools are much better suited than that sort of approach.
This article shows how to configure the RMS and may help show how your request is difficult to configure:
http://www.harbar.net/articles/sp2013rm2.aspx

Free domain name for .mac websites.

Is there any free site that works with .mac's personal domain feature. I have one through microsoft office live (free) but cannot seem to find out how to do it through that. Any information?

http://www.ulimit.com/en/vdns.php
http://www.dot.tk/en/pageA00.html
But these are only redirects (with cloaking maybe). They aren't CNAME. I don't think there is any free domain name who does CNAME.
Regards,
Cédric

How to Use 'uid' for AD Users Without Domain Name For User Log in OAM

How to Use 'uid' for synchronized Active Directory (AD) Users into Oracle Internet Directory (OID) Without Domain Name For User Logins in OIDDAS and OAM
We successfully integrated OAM 11g with EBS R12.1.3 Now all the AD user id's stored in fnd_users table as [email protected]
How can we remove @abc.com
We are using OID 11g and OAM 11g
Found the similar note for OID 10G: How to Use 'uid' for AD Users Without Domain Name For User Logins in OIDDAS and SSO [ID 580480.1]
We are in OID 11g.
Any help on this greatly appreciated.

I couldn't find any reference that could be helpful -- Please log a SR and see if this is supported and if the steps are available.
Thanks,
Hussein

Reg: How to Configure internet for solaris 10 in x86 32 bit

Hi,
I am new to Sun Solaris can any one help me detailed step of how to configure internet for standalone pc. Thanks in Advance
Thanx
MA

OK, the classical way:
Open a terminal.
Type
ifconfig -a
ifconfig -a plumb
ifconfig -a
Note the differences, it will plumb ALL available interfaces this way. So, now you can see, which device is your network card.
Then perform a
ifconfig <interface> unplumb
for all the newly interfaces (aka those, that were new in the last ifconfig -a output).
Then, the simple way:
cd /etc
vi hostname.<interface-driver-name>0 (example: hostname.rge0, the driver would be rge, the instance is 0, and rge0 would have been displayed as an available interface in the last ifconfig command). Add the name of the host into this file.
Then
vi /etc/inet/hosts
and add the pair of IP-address and hostname.
If needed:
vi /etc/inet/netmasks
if you have a sub-divided network, and you need a differenbt subnet mask...
Then:
vi /etc/defaultrouter
and add the name or ip-adress of the gateway... (name only, if you have that name also in the /etc/inet/hosts file!)
Also:
vi /etc/nodename
and add the name of your host into that file, so that the system knows, who it is... ;-)
And: For the DNS you can then add the infos into:
/etc/resolv.conf
For example:
nameserver 192.168.2.1
or some such...
Then, as the last but one step:
ls /etc/nsswitch.*
and:
cd /etc
cp nsswitch.<what you need> nsswitch.conf (should be .files here!)
And the reboot... ;-)
HTH!
Matthias
P.S.: There might be some GUI, but I'm an old-timer, so I prefer the command-line version of things...

How to change IP, Hostname and domain name for Oracle Application R12

Hi,
I'm new to Oracle, we used to have one production and one test server for Oracle Application R12, but the test server was corrupted, so we decided to clone production server and create a new test server, after cloning and creation of test server, how should we do to change IP address, hostname and domain name for test server?
Our production and test server environment is:
Linux Enterprise AS 2.6.9
Application module: E-Business Suite Treasury only
Your advice will be much appreciated.
Regards,
Kenneth
Edited by: 850209 on Apr 7, 2011 5:37 PM

850209 wrote:
Hi,
There are few tnsnames.ora and listener.ora files in the system, how to know which one are effective? If I change tnsnames.ora hostname entry, do I need to change listerner.ora file also?
Thanks.
Regard,
Kenneth.tnsnames.ora is used only by client processes. listner.ora is used only to configure the listener, and that is a server side issue only. In addition, the listener can start without any listener.ora at all, using all default values. See my discussion of tns issues at edstevensdba.wordpress.com
If you are using dbcontrol, you will most likely need to reconfigure it, using the emca utility.

How to change the name / IP address and domain name for BOE Server

Hello,
We want to change the name / IP address and domain name for BOE Server, please could you indicate the steps or procedure to follow?
I need your help
thank you

If it's 3.1 just change them, shouldn't cause any issues if by domain name you are referring to changing the domain the computer belongs to. If you are changing your domain for AD authentication then you will may have to take quite a few steps if the old domain is going away. Let us know.
Regards,
Tim

How to set Netbios/Partial Qualified Domain name for a Mac?

Is it possible to set a Netbios/Partial Qualified Domain name for a Mac the way one sets it for a PC? If so, where can this be set? Apparently, this is what my router uses to report clients connected by DHCP.
Mike

You're looking for something completely different if
what you're after is to have your DHCP server (your
router) report your computer name.
yep - that's what I'm looking for but everything else didn't pan out so I'm following up the suggestion of our IT guy (which is that it reports the Netbios name).
I don't know what brand or model of router you're
using but with a Linksys brand router it reports the
yep - I've got a Linksys, about 2 years old (802.11b).
computer name, which is set on your Mac under Apple
menu --> System Preferences... --> Sharing. The
Linksys router will report the computer name
typically found under Status --> Local Network -->
DHCP Clients Table.
nope - I've got it set as "Michael Levin Laptop", but the Linksys router shows it (and all of the other Macs on the network) as "¸#Ð„ª"... Any way to debug this?
What you'll notice is that none of this has anything
to do with Windows. Today's basic networking is
platform agnostic.
I thought so; it was a desperation move, based on my IT person's suggestion...
Thanks,
Mike

How to configure multiple domains in Active directory

HI,
How can I configure multiple domains on Active Directory. When I installed AD it asked for a domain name, there I gave ravigupta.com as domain name. But now I find no way of creating another domain.
I am a java developer and my task is to write a programme which returns all the domains available in LDAP server.
To start with ,I tried to create few domains in LDAP server ( AD ) but stuck up ,as i found there could exist only one domain.
Please tell me how to configure multiple domains in LDAP server ( Active Directory).
I skiped DNS configuration while AD installation.
-ravi

I'm sorry, but you should be asking on a different forum. This has nothing to do with Java.

Change internet domain name

Good Morning,
I have a windows 2008 sbs and i had configured an internet domain name(remote.xxx.com) with wizard from sbs console and all works fine, exhange and outlook clients.
Then i changed internet domain name(remote.yyy.com) and now when i open outlook, it open an alert with a certificate error from old remote.xxx.com . if i press ok it works because exist a dns record that aim to exhange server with old name.certificate for
new internet domain name is correctly installed
why does outlook try to connect to old name yet?
thanks

Hi
The certificate installed for Exchange has the old name, with most 3rd party certs you can make changes to the cert and then install a new one.

How to configure oracle thin drivers for SUN APPLICATION SERVER

hi all,
I am working with EJB with oracle as back-end. I wants to know how to configure oracle thin drivers for the SUN APPLICATION SERVER. Please explain me breifly.
Advanced thanks to all the replies.
with regards,
/kumaraswamy.n

Kumaraswamy,
Did you try searching the Internet? Here are the results of my Internet search:
http://tinyurl.com/zo4gk
And one of the first hits in the list was this:
Deploying to a Sun Java System Application Server
Good Luck,
Avi.

How to get mobile model name for different types mobile devices

Hi,
I have checked few thread in this forum about getting mobile model name at server. So far, i noticed the mobile name is set manually in the midlet as user-agent .
HttpConnection connection = null; connection = (HttpConnection)Connector.open(url); connection.setRequestMethod(HttpConnection.POST); connection.setRequestProperty("User-Agent","Nokia7110 Profile/MIDP-1.0 Configuration/CLDC-1.0");
i retrieve the header information from servlet like below :-
String userAgent = request.getHeader("User-Agent");
How to get mobile model name for different model devices , not by manually adding the model name in midlet?
Thanks in advance :-)

Hi,
In J2ME there is no method to get the model number from the device. how ever you can use the APIs provided by the device manufacturer if available. But still the APIs will not work with devices from other manufacturer or sometimes it will not work with the devices of the same manufacturer if the API is not supported. so it is better to send the device model name through the header.

How to configure internet domain name for P6 website using weblogic

Similar Messages

Maybe you are looking for