How to configure ESOA Scenario is PI 7.1

Hi All,
I am new to PI 7.1 and working on the ESOA concept in PI 7.1, I am not sure to post this question in this blog or not, please help me on this urgent issue. I have developed a service interface in ESR, created a proxy in ECC 6.0, make it as a webservice and published it in service registry. Please help me how to proceed further from here and provide me the possible ways to configure this scenario in PI 7.1. Kindly provide me the information what adapter should I configure at sender side and what adapter at receiver side? Is there any other possibility to configure without receiver side adapter? The requirement is urgent kindly provide me the information. I appreciate your quick response.
Thanks and Regards,
Swaminathan.

Hi,
Please fallow that link: http://en.wikipedia.org/wiki/RTFM
/wg

Similar Messages

How to configure a scenario which posts same file to different directories

How to configure a scenario which posts same file to different directories of a receiving system?
Consider an Idoc to file scenario where I have to post same file to two different directories but logical receiver system has to be same.

Hi,
You can try out like this: Using multiple receiver interfaces you can send it to multiple directories with the help of enhanced interface determination/conditions and with the help of multiple receiver communication channels.
Another option is to copy the file from one target directory into another directory with the help of Unix script by executing the same from the OS command level.
One more option is to create a Java Server Proxy and inside the proxy, you can write java code to FTP into different locations.
Hope this helps,
Regards,
Moorthy

How to configure IDoc scenario?

Hi All,
We have a scenario where we have to send wire transfers to the bank. It's a standard transaction tha produces the IDoc in file format and then XI picks it up and sends it over to the bank.
So for Xi it's a simple file to file scenario without any mapping.
But now the issue is bank wants some kind of identifier in the control segment so that they can identify that the file came from our company.
Is there a way we can put some kind of identifier in the IDoc Control segment with any mapping in XI.
I believe that we can use Idetifiers in the File adapter to somehow configure this. But I don't know how...
Please advice..
Regards,
XIer

The IDoc is PEXR2002. used for wiretransfers....
We are not allowed to change the standard program that is producing this IDOC.
So we need to do something at configuration level....
Regards,
XIEr

How to configure RFC scenarios

Hi all,
I am creating an outbound RFC async interface and an inbound RFC async interface. I have read the SAP Help documentation on 'Configuring Sender RFC Adapter' and 'Configuring Receiver RFC Adapter'. What are the steps involved for each?
Outbound:
1. Create RFC connection in SM59 in R/3. The outbound connection must be type TCP/IP.
2. Configure the sender RFC adapter in XI. The Program IDs in the RFC connection and RFC adapter must match.
3. Activate the sender RFC adapter to register the Program ID in the Gateway.
Inbound:
1. Create RFC connection in SM59 in R/3. The inbound connection must be type R/3.
2. Configure the receiver RFC adapter in XI.
3. Done.
Am I missing any steps or are any steps not correct?
Does anything need to be configured in the SLD for the RFCs?
Are the RFC types TCP/IP and R/3 correct?
Thanks in advance!
Dan

Hi Daniel
You already got replies from experts
I can add some load to thread that can be helpful
Troubleshooting RFC
Troubleshooting - RFC and SOAP scenarios *** Updated on 20/04/2009 ***
Sender RFC
The specified item was not found.
RFC calls from Adapter modules...the Web Service Way!
RFC adapter reconnect issue
XI : RFCAdapter ReConnect Issue
Thanks
Gaurav

How to configure 3 different members under a single Month column

Hi SAP Gurus,
My client requirement is to show the report in following format, where under a Month column 3 different columns having
1) Quantity (Number of unit ) of a product,
2) its rate (Amount per unit), and
3) Total (amount)    will appear in a single report.
   I have Month as a Time Dim, while Qty, Rate and Total are members of account dim.
Que: How to configure such scenario in a single report?
Jan.2011
Product Category:            Qty (Input)   Rate (Input)   Total (Output)
Product 1
Product 2
Product 3
Product 4
Group1
     Where: Total = Qty X Rate
Thanks and Regards,
SouarbhD

Hi,
Use an EVDRE to create your input schedule. You need to have one row with products and 2 columns with time and account. Choose the memberset options as per the requirement. For the accounts, is total calculated with a dimension formula? If yes, then you just need to enter the values for quantity and rate and send the data. The total will be calculated by the system and will be displayed automatically.
Hope this helps.

How to configure bulk breaking articles in SAP retail

hi frnds...
This is my client needs...
How to configure bulk breaking articles in SAP retail for hyper market..
Scenario is like this... Ex: for MEAT
There should be a Parent article & child articles process.
i.e Chicken X - 100 corcoss is divide into child articles (A,B,C,D,E,F) like
Brest bone - 5kg     - A
leg pieces - 2.5kg   - B
wings - 2.5kg         - C
P - 7.5kg                 - D
Q - 10kg                 - E
R - wastage - 50kg - F
these child articles wont consider for inventory
So how to configure this scenario in SAP Article master & to run this process.
Pl help me out with scenario

Please have alook at
[http://help.sap.com/erp2005_ehp_03/helpdata/en/2b/b03889df3611d1953b00a0c930e0da/content.htm]
Material type WERT is correct.
In Material type maintenance you can control at all if a store will be value only inventroy managmenet or both.
Further in the Site master WB02, you can control it on MC level.
regards
B

How to configure jobwork process in Co

Hi,
In our business process in one of operation we need to send the material to jobwork and client want to track that amount and want to include in cost rollup?
In out scenerio, first two operations will be held inside and third operation will be sent to vendor, after it returns to company 4th operation will be happend again in company.
Some times company will pay the amount based on fixed charges and some times based on activities performed.
And how to configure this scenario in costing.
Thanks
Sateesh

I hear you describing a process that SAP calls External Processing.
We used it in one plant years ago. the operations list in the Routing included steps for work in internal workcenters and one step was done in a work center that represented an outside process.
The operation had control key PP02 Routing/Ref. op. set - external process
For that operation - the details have a section titled: External processing.
This included fields for :
Purchasing info rec.      Purch. organization    0610
Material group
Purchasing group
Vendor               120945
Plnd delivery time   10 Days
Price unit           1                 Cost Element         513051
Net price            0.48 ;
I don't remember all the details of setting it up, it did cost correctly though
Issue - the PO were not always correctly recieved, make final settlement of the production order an issue and we were not able to CLSD the order because of open PO on the Production order.
Issue - the material was not trackable (could be the way we did it, may be something to do about it) but when the External operation was reached, the Production stopped, the material went out and waited for the return. The material at the vendor was part of WIP not a stock item in a separate location.
Because of these two issues, we discontinued the practice and changed to standard subcontract (Spec Prc KEy 30) with a separate material number for the material that went to the vendor and a different number for the material on the purchase order that was returned.
hope this is of help

How to configure a full JMS Sender Adapter Scenario

Hi guys,
I have to do a JMS -> PI (7.1) -> File scenario, I never used JMS Adapter, and I'd like to tell you what I have done, and what I think is missing.
First I went to the NetWeaver Administrator ->Configuration Management ->Infrastructure ->JMS Server Configuration-> Create ->JMS Queue.. and I created a new Queue from a Virtual Provider (SAP JMS Provider).
The first thing I didn't know how to configure it is which transport protocol I have to choose in the CC adapter (SonicMQ JMS Provider, WebSphere MQ, etc..)
But I also don't know is if there's something missing on the NWA, to create, modify, etc. I read this slide: (https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a05b2347-01e7-2910-ceac-c45577e574e0) where was shown how to create a SAP standard queue, and I also read all the documentation from help.sap.com (all the JMS basics and explanation) but I still don't know how to fully configure the CC and how to trigger the messages.
Please, if you need further information I can give it.
Thanks in advance.
Juan

Hi,
did you try this blog from William?
/people/william.li/blog/2006/11/13/how-to-use-saps-webas-j2ees-jms-queue-in-exchange-infrastructure
Regards,
Michal Krawczyk

How to configure the following scenario?

I have a following requirement:
I am selling an equipment to a customer and the delivery has taken place in Jan 2008. However as per the requirement I can recognize the revenue only in after installation which will be in March 2008. However I will be invoicing the customer, but the revenue will be recognized only after completing the installation. This is supported by RR, but I would like to know how to configure? Appreciate your help.

Hi,
Your scenario is for service industry involving selling of equipments first followed by installation of the same and services later on. The installation of the equipment is the triggering point for recognising the revenue and not the sale of equipment. Looks like a typical telecom scenario.
My suggestions are as below:
1) if possible, discuss this with your finance business team and move away from this scenario of revenue recognition. This scenario takes more efforts and provides less benefits. You not only need to deferr the revenue but also the cost and SAP does not support 1 to 1 mapping of the invoice for deferring the cost. (As per the matching concept in accounting, revenue and cost should be mapped in proper buckets so that the accurate margins can be calculated). If the installed base is required for some statutory reporting, you can generate that seperately from SAP by maintaining the install base.
I know this is very tough change management activity to make happen but this really has long term fruits attached to it as it simplifies your business processes.
2) Try this on your sandbox system. Use revenue recognition type as B - Service related revenue recognition. Apply a deferred account in VKOA settings for your ERL key or the revenue account key you are using. Now create the order and process it through delivery and billing. The accounting entry should post to deferred account. Run VF44 for the billing document and recognise the revenue.
This process helps you in doing the recognitoin but the only catch here is that there is no triggering point. You need to control the running of VF44 manually by generating a seperate report which can tell you which billing document to recognize from deferred account and when. If you would like to have the installation date as triggering point, then you would have to modify the Standard SAP to have some user exits placed in the revenue recognition functionality to make it happen. This i would only suggest you if you have good hands on SAP revrec both functionaly and technicaly.
I know that my answer is not going to give you a easy fix for your problem but that is the best way to go without making much of the changes to standard SAP. Feel free to contact me back in case of any questions at my email address [email protected]. If you can send me your phone number then we can have a small call where we can have more detailed discussions.
Thanks
Kapil Sharma

Documents / Cookbook on how to configure Extended Classic Scenario?

We currently have the Classic scenario and are thinking of changing to exteded classic becuase we want to use the sourcing cockpit in SRM 7.0. Does anyone have any good documentation on how to configured Extended Classic?

Hi Sivakumar,
If you mean how to archive PO in MM side, please refer to the following info:
====
In ECC system, if you want to archive a MM PO, please use transaction
SARA->archive object MM_EKKO.
456129 FAQ: Archiving in purchasing
401318 Archiving: Additional information
====
If you want to delete this ECC PO, please use BAPI_PO_CHANGE and
refer to the following test data:
Parameters:    PURCHASEORDER      = XXXXXXXXX
Parameters:    POITEM
PO_ITEM                        = 00010
DELETE_IND                     = X
Parameters:    POITEMX
PO_ITEM                        = 00010
PO_ITEMX                       = X
DELETE_IND                     = X
You also need to run BAPI_TRANSACTION_COMMIT after BAPI_PO_CHANGE for updating the change.
Regards,
Ivy

How to configure workflow manager 1.0 ? Scenario "sharepoint 2013 and sql server 2012 workflow manager in one server" .

i have sharepoint 2013 and sql server 2012 in one server . how to configure workflow manager 1.0 on the same server ?

Please follow below technet article :
http://technet.microsoft.com/en-us/library/jj658588(v=office.15).aspx
Installing and Configuring Workflow Manager 1.0 (Step by Step)
Note: The steps in this article apply to SharePoint Server 2013.
The SharePoint 2013 Workflow platform is not supported in SharePoint Foundation 2013.
If my contribution helps you, please click Mark As Answer on that post and
Vote as Helpful
Thanks, ShankarSingh(MCP)

How to configure CSWP on Category page to show the Published Catalog-item page on Publishing site in a Cross Site Publishing scenario?

I have created a Cross Site Publishing Environment in SharePoint Online. After connected
to my catalog. 2 pages automatically created. But in "Category" page, if i click on an item it will bring me to the original path/item located in Authoring site. How to configure Content Search Web Part on Category page to show the Published Catalog-item
page on Publishing site?
Can we do this by changing the property mappings?

Hi,
According to my understanding, you want users to be redirected to pages in the current site instead of the source page of the search results in a Content Search Web
Part.
By default, the hyperlinks of the search results in a Content Search Web Part will point to the source page where the data comes from, when the hyperlink of each result
is clicked, user will be redirected to the corresponding source page.
If the data comes from other sites, what page do you want to display when user clicks a search result in the Content Search Web Part?
Property Mappings can help to control the content of each part of a display template, however, there seems no such property in the search result can help to redirect
to the pages of the current site, thus, it might not be able to meet your requirement.
More information about customizing the Content Search Web Part:
https://www.martinhatch.com/2013/02/customising-cbswp-part1.html
Best regards,
Patrick
Patrick Liang
TechNet Community Support

How to configure request manager service for multiple website in one web application

I have set up sp 2013 as below:
web application : wa1
site collection : sc1
sp site: site1, site2
I used 2 WFE, 1 APP, how can I use request manager service to control site1 to wfe1, site2 to wfe2?
Awen

That's not what i'd describe as load balancing.
A better description would be load-isolation. In your description then if the load on site1 was large (and growing) but site2 was quiet then site1 would struggle and eventually become unable to handle the number of users but site2 would still be ok. That's
fine from a QOS point of view but it's not the norm for load balancing. It would work in simple scenarios but the out of the box load balancing tools are much better suited than that sort of approach.
This article shows how to configure the RMS and may help show how your request is difficult to configure:
http://www.harbar.net/articles/sp2013rm2.aspx

How to configure an Alert message if communicationChannel(JMS) stops

All,
Is there a way how to configure an alert when the communication channel stops.
<b>Scenario:</b>
In the path Runtime workbench->Component Monitoring->Adapter Engine->Communication Channel monitoring, if we see that a communication channel has stopped(RED traffic light as Status), then can we trigger an alert notification for same.
Currently we have alrerts configured for any message/s failure in the JMS Adapter Framework. So can we trigger simmilar alerts when a comm channel stops(for whatever reason).
Thanks in advance
RK

Hi Sreeram,
Thanks for the quick reply.
We have a scenario where we activate individual channels at a given time. So in this case, Adapter will always be in RED as all queues are never running in our scenario.
So we need an ALERT to be triggered for individual comm channels. Is theer any way that you can think of ?
Thanks and regards
RK

Don't know which technology to utilize or how to configure ASA5505

I have an ASA5505. Currently, it is using static NAT on several ports to forward traffic to several devices inside my network. It is a pain not only to configure but from the end user side.
The issue I am having is the applicatoins I am using to access the devices become a mess with dual configurations, one for when I am connected to the internal network and one for when I am away from the office and accessing from the internet. For example, I have 2 Cisco VC240 IP Cameras behind the ASA5505. One is set use port 9091 and the other 9092. When I am inside the office, I access them via http://10.1.2.215:9091 and http://10.1.2.216:9092. But when I am away from the office, I have to have another configuration in an Android app to use them, http://external_ASA_IP:9091 and 9092 and then NAT 9091 to the object for Camera1 and 9092 for Camera2. This is only one scenario. I also have a UC320W that I would like to put an IP phone at home and it sounds like AnyConnect is the only way to do this.
It sounds like to me that if I use some type of VPN, I can access the same devices using the same IP whether internal or external with the external connection using the VPN to tunnel the IP to the local network. There seems to be quite a few ways to do this with an ASA 5505.
AnyConnect seems like the way to go but after reading Cisco documentation, it requires your Android device to be root'd if it is not a particular Samsung model. If I understand correctly, root'ing your phone voids the warranty. I know it is common practice but would think Cisco would have a better solution as I am sure Cisco would not want another manufacturer telling their customers to void the warranty on their Cisco equipment in order to get it to work.
I believe I can just use IPSEC and use the native VPN of the Android OS and also tunnel L2TP as the Android supports IPSEC-PSK/L2TP or IPSEC-CRT/L2TP. But will either of these will support the IP phone to the UC320W?
A friend also told me to use NginX to proxy URL's so the URL http://www.fqdn.com/camera1 gets proxy'd to the internal IP of Camera1 and http://www.fqdn.com/camera2 gets proxy'd to Camera2. He says I should be able to store a cookie on the phone and let the phone authenticate to the camera and if the phone cannot, the proxy can authenticate internally to the IP camera over SSL.
I don't know anymore, I am so confused and just want to simplify my life as I am just a small business with me and a couple other employees but I have full-time job and it is not IT/Network Technician, it is only CTO/CEO/CIO/CFO. I don't have hours upon hours to set this up and test and I don't have hours upon hours to manage it. I just need to simplify this and have so that it is a set-it-and-forget-it for 6 months to 1 year and re-evaluate or update. So, if someone suggests IPSEC, I would not know how to configure anyway and you should expect another post. The same for AnyConnect or any of the other suggestions.
Thanks in advance for any advice.

Hi!
1. Set Calculation Mode property of ITEM_5 to Formula.
Formula property:
nvl(:Block_Name.ITEM_1, 0) + nvl(:Block_Name.ITEM_2, 0) + nvl(:Block_Name.ITEM_3, 0) + nvl(:Block_Name.ITEM_4, 0)
OR
Function_Name(Param_1,... Param_N);
Have in view of, that the ITEM_5 data will not be saved in DataBase.
2. When-Validate-Item trigger is usfull when is necessary to store calculated item data in DataBase.
Rename you Post-Query trigger to When-Validate-Item.
Modify trigger: Store calculation result in the variable.
(Don't forget to round variable value!)
Then compare it with ITEM_5. If they are different - :ITEM_5 := var_name.
I prefer the first method.

How to configure ESOA Scenario is PI 7.1

Similar Messages

Maybe you are looking for