How to configure bulk breaking articles in SAP retail

hi frnds...
This is my client needs...
How to configure bulk breaking articles in SAP retail for hyper market..
Scenario is like this... Ex: for MEAT
There should be a Parent article & child articles process.
i.e Chicken X - 100 corcoss is divide into child articles (A,B,C,D,E,F) like
Brest bone - 5kg     - A
leg pieces - 2.5kg   - B
wings - 2.5kg         - C
P - 7.5kg                 - D
Q - 10kg                 - E
R - wastage - 50kg - F
these child articles wont consider for inventory
So how to configure this scenario in SAP Article master & to run this process.
Pl help me out with scenario

Please have alook at
[http://help.sap.com/erp2005_ehp_03/helpdata/en/2b/b03889df3611d1953b00a0c930e0da/content.htm]
Material type WERT is correct.
In Material type maintenance you can control at all if a store will be value only inventroy managmenet or both.
Further in the Site master WB02, you can control it on MC level.
regards
B

Similar Messages

How to implement value only articles in SAP retail.

Hi
I have gone through the sap material on Value only materials, but i am not able to get hold of how value only materials would be implemented in SAP retail. Should we use WERT material type to start with or is there any other way to implement the value only materials.
Any material or links leading to step by step procedure to implement value only materials would be highly appreciated.
regards
mohammed

Please have alook at
[http://help.sap.com/erp2005_ehp_03/helpdata/en/2b/b03889df3611d1953b00a0c930e0da/content.htm]
Material type WERT is correct.
In Material type maintenance you can control at all if a store will be value only inventroy managmenet or both.
Further in the Site master WB02, you can control it on MC level.
regards
B

Configurable article in sap retail?

Hello Experts,
Can we have configurable articles in sap retail?
Please tell me your opinions..
Thanks

Take an example of computer where we have different model of computer lets say
xyz 7000 black
xyz 7000 blue
xyz 7000 white (three variants of xyz 7000 series laptop)
customer can build his laptop from the list of components by having picking different options of hardware such as processor, ram, cds hard drive etc.
Once customer selected the desired components and production order will get generated and the delivery happen to the customer..
the above scenario we want to do it thru article master..(mm41) not thru standard material master.
thanks
MG

How to check the sales stock of an article in SAP Retail

Hi SAP Leaders,
I just want w how can i check the sales stock of an article in SAP retail.
I have to archive the sales stock of an article. IN WSE1 , it showed the article cannot b be archived as there are open sales stock. HOw can i check the sales stock of an article in SAP Retail and archive it finally.
Regards.
SS

Hi sumi,
pls check Material Stock ALM_ME_090_CUST_USER and * ACBAPI01 EXIT_SAPLACC4_001 Accounting: ... material master (Retail) * MGV00003 ... Enhancement for article master: IDoc ... Changes in the Workflow Parameters ... 41. PROACT Stock and sales data * ... EXIT_SAPLWPUE_105 Check.
Regards
Sridhar

How to configure GB P60s in the SAP Portal?

How to configure GB P60s in the SAP Portal, so that they can be viewed and printed/reprinted by the employee themeselves? Will HMRC accept P60s printed on any stationeries? Also, Client does not want employee address to be available in the address section, but just the office location.

Hello
Please refer SAP note 1542870 -Electronic P60 ,where HMRC have given employers the option of providing an electronic P60 to their employees.
Please let us know incase you know any further information.
Thanks and Kind Regards
Ramana

Follow-Up and Replacement Articles in SAP Retail

Hi everybody,
Iu2019m using SAP Retail and I need to maintain Follow-Up and Replacement Articles.
Iu2019ve created the Follow-Up Categories in the customizing and Iu2019ve assigned replacement article to the original article in transaction WRFFUART.
Does anyone know how the subsequent process works? If I create a Purchase Order or a Sales Order to the original article, does the system automatically replace it by the replacement Article? Iu2019ve tested this but there was no substitution.
Thanks in advance,
SN

Hi Barbara,
I am analysing the functions for Follow-Up and Replacement Articles in SAP Retail ECC 6.0 Ehp. 3. I created Substitution profiles (SPRO: Logistics u2013 General -> Material Master -> Retail-Specific Settings -> Settings for Follow-Up/Replacement Material -> Maintain Follow-Up Categories) and assigned replacement article to the original article in transaction (WRFFUART). I also activated Substitution Processing and Start Replacement logic in Background (SPRO: Logistics u2013 General -> Substitution Processing -> Activate/Process Substitution Processing).
I tested the process steps you posted (ME21N, VL10B, WSUBST_WORKLIST). There was no automatically substitution after creating the outbound delivery. And the transaction WSUBST_WORKLIST just shows u201CNo data available for selectionu201D.
I analysed the application and found the table WSUBST_WORKLIST. It handles the entries for substitutions. It was empty. When I fill the table manually with data and run the WSUBST_WORKLIST the outbound delivery and the purchase order have a new position with the follow-up article but the original article is still there, unchanged.
Why did the substitution not start automatically in background and why is the original article still in the purchase order and outbound delivery?
It is also interesting, that the material quantity changed. The purchase order includes five units of the original article and the substituted article has a quantity of eight. I guess the reason is a rounding value for procurement.
The ERP 2005 documentation on help.sap.com ([Assigning Follow-Up and Replacement Articles ERP 2005|http://help.sap.com/erp2005_ehp_02/helpdata/en/a2/7c936660dc4da09a3a1d08ee7eeca2/frameset.htm]) describes a conversation factor for the units of measure of the original article and substitution article for each assignment. In the ECC 6.0 documentation ([Assigning Follow-Up and Replacement Articles ECC 6.0|http://help.sap.com/saphelp_erp60_sp/helpdata/en/a2/7c936660dc4da09a3a1d08ee7eeca2/frameset.htm]) this is missing. In the system I also could not find any type of conversation factor for Follow-Up and Replacement Articles.
Is this option not available in ECC 6.0 or where can I find it?

How to configure letter of credit in SAP

hi all,
how to configure letter of credits (LOC) in sap.
regards
srinivas

Hi,
Letter of Credit / Bank Guarantee are noted items in SAP. There is no effect in the books of accounts for these items. You have to create seperate Spl G/L Indicator for LOC and assign the same to normal reconciliation account of Vendors / Customers as per your requirement. For creating this go to 'OBXT' and the necessary configuration. To create LOC in SAP Easy Access goto F-55 and process the transaction.
Regards
Sarma BH

How to configure for GPlus Adapter with SAP Phone and SAP CRM

Hi All Basis Adm,
Please consider as an urgent basis i need the information that how to configure GPlus Adapter with SAP Phone and SAP CRM . My server is CRM 5.0 (kernel 7) with Oracle Database. This information is require to connect Webclient to Sap Phone with GPlus Adapter (Genesys Adapter 7.1). If u have any document regarding mentioned above than that will be acceptable.
Regds,
Govinda

Hi Prasad,
In you case, it's a file to file scenario.
Go thro' this link for a solution:-
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
Regards.
Praveen

Steps on how to configure inbound e-mail to SAP

Good Day!
     Is there anyone who can give me the procedure on how to configure SAP e-mail going to e-mail server(exhange server). Actually from SAP GUI e-mail going to external e-mail like exchange....
thanks..

Dear Dwight,
Kindly refer to the Base note 455140 for configuration details.
Following notes might also be helpful :
607108     Problem analysis when you send or receive e-mails
601806     Checklist Extended E-mail Inbox Setup
546147     SMTP plug-in: MS Exchange sends only to port 25
Regards
Amit

How to configure a personel action in sap hr

Hi Friends:
I have just started workin on SAP HR, and would like to know how to configure a personel action.

Hi,
1. Access the activity using one of the following navigation options:
Menu System -> services -> table maintenance ->extended table maintenance  T588C
Transaction Code SM30
2. Make a check on User-dep.
Menu type Menu Text User-dep.
G Y1 Hiring Service Provider checked
IMG Menu Personnel Management -> Personnel Administration -> Customizing Procedures  Actions -> Define infogroups
Transaction Code SPRO
User group dependency on menus and info groups
Menu Text User-dep. Reaction Ref.
Y1 Checked blank 01
IMG Menu Personnel Management ->Personnel Administration ->Customizing Procedures -> Actions ->Set up personnel actions
Transaction Code SPRO
Action type Name of action type FC Employ-ment Spec. pymt Check P PA EG ES IG U0000
Y1 1 3 1 _blank x x x x Y1 x
Creating Reasons for Personnel Actions
IMG Menu Personnel Management -> Personnel Administration -> Customizing Procedures-> Actions  Create reasons for personnel actions
Transaction Code SPRO
Reason for Action:
Action Name of action type Act.reason Name of reason for action
Y1 blank blank
1. Access the activity using one of the following navigation options:
Menu System ->services -> table maintenance -> extended table maintenance -> VV_T588C_M_AL0
Transaction Code SM30
2. Choose menu type M.
3. Entry table VV_T588C_M_ALO and make a check on User-dep.
Menu type Menu Text User-dep. Reaction Ref.
M 01 Actions checked 01
Action Menu
Procedure
1. Access the activity using one of the following navigation options:
Menu System -> services -> table maintenance -> extended table maintenance -> V_588B_M
Transaction Code SM30
2. Choose menu type M and menu 01.
3. Make the following entry.
Usergroup No Action Name of action type
01 20 Y1 Hiring action services
Thanks and Regards,
Revathi.

How to configure fix tax amount on SAP (example : stamp tax)

Dear All,
Do you know if there is any posibility to define a fix tax amount on SAP,
To summarize, a vendor add 1u20AC to each invoice, called the stamp tax. I need that when I am posting the amount in the G/L account the stamp tax "1 u20AC" be posted to a special expansion account.
Is this possible
thanks

Dear Meher,
Have you managed to find a way to configure the stamp fee in SAP. We are facing the same issue. We need to set up a fixed amount tax on sales documents (invoices).
We are also facing the same problem in Tunisia with the 3 decimals format. Legally all documents should be in 3 decimals where as our CO currency is in EUR and in 2 decimal format.
Dear all, you can comment please if you have faced a similar problem.
Thanks,
Hosni

Handling of Hazardous Articles in SAP Retail

Hi SAP Retail Experts
Would like to know the porcess in SAP to configure the hazardous goods management in Article master whereby we can accomodate the dangerous goods data from and external system into Article Master.

Dear Pratim
I don't catch your question. Check e.g. SAP Environment, Health, and Safety Management (SAP EHS Management)
1.) the term "Dangerous Goods" and Hazard substance" is not the same
2.) In EHS classic you can get external data for DG use using ALE; same is true for hazardous substance master
I have no experience with SAP Retail. But according to SAP help: This is a SAP ECC/ERP system in a "special" mode (you have activated an "industry specific" function). So you need to prepare EHS customizing
C.B:

User exit; Article master SAP Retail for MVKE table?

Is there a user exit in SAP Retail for the MVKE table?
The articles is maintained in a third-party system and are transferred to SAP via Idoc. For sales sets, article category = 10, these requires a item category = ERLA in SAP (MVKE-MTPOS) so that the sales set "explodes" in the sales order.
The third-party system doesn't maintain sales org-spesific data for the articles, therefor we use one ref.article for all article groups. And because sales sets exits in many article groups, we found it difficult to have ref.articles for all of these article groups.
Also the article type is also "normal",so the only way to differentiate the sales sets, are via article category. But since SAP has no link between article category and item category in customizing (as far as I know), I wonder if there is a user-exit to set the item category based on the article category?

Hello Sonika,
WE_PLU is generally used along with the POS interface.
Please check this for more details
http://help.sap.com/saphelp_470/helpdata/en/ed/df673c86d19b35e10000000a11402f/frameset.htm
Article Master Uploading in IS- Retail system
This is basically your call depending on what data the message type is intended to carry and the use. ARTMAS should be the choice in your case.
Regards,
Nimish

How to assign area in site (in sap Retail) for different article.

Hi All Experts,
Can you tell me how to assign the space in layout tabs of site master data(wb01) in retails for the different products \merchandise category.
My aim is to see the contribution of article \Floor area in the store.
Ex- i have mobile ,tv and washing machine
now i 'll assign some area to these art(floor area)
Like 200 Sq mm for mobile ,1000for tv and 1500 for washing machine.
I want to assign in site master data so it comes automatically for every site.
Now i want to see the contribution of all these article \Floor area in the store.
Looking for your valuable suggestion.
Prashant

Nachy,
You can copy the overview iview of type workset map iview from standard ess role and give the area group name in that.
check the overview iview in the standard ess role
give application parameters as sap.xss.menuargrp=area group name&sap.xss.menuhdr=header name
Thanks
Bala Duvvuri
Edited by: Bala Duvvuri on Aug 5, 2010 7:35 AM

How to configure E-Mail servers in SAP?

Dear All,
| have configured e-mail server in R/3 properly (using SCOT tcode). However, when I am trying to send mails for testing purpose (using SBWP tcode), its showing status as "send process still running". But after some time, its showing status as "error during send process"
can any one please help me troubleshoot this problem? Should you need any information, kindly let me know.
Waiting for your kind immediate responses!
Regards,
Faisal

Hi Brahmankar,
I have gone through the notes and links you have sent me. Its very helpful and informative as well. Following are my observations and understandings:
1. As I mentioned, we are on 4.6C , therefore tcode SICF is not executable to activate SAPConnect service. Its only available on WAS.
2. I think I have to make use of SAP EXCHANGE CONNECTOR if its R/3 4.6C. Then only I will be able to configure SMTP mail server. Because,
note#122657 says that:
if you are using SAP system based on WAS 6.10 or above then you should use the SAPconnect (E)SMTP
linkage for the exchange connection. You no longer need to install the SAP Exchange Connector
3. Can you please confirm that I have to use SAP Exchange Connector to configure SMTP mail server?
4. There is not SMTP node in tcode SCOT ! Only I get FAX and INT nodes. How to get the SMTP node?
you said that:
If you are running Exchange Server 2003, and 4.6C it will be tricky.
could you please guide and help me in making this process tricky ?
That would be a very great help and I am looking forward to have your kind help for the same!
If you need any other information from my side, kindly let me know.
Thanks and Regards,
Faisal

How to configure bulk breaking articles in SAP retail

Similar Messages

Maybe you are looking for