How to configure for remote JMS client?

I have my own Java JMS test program for performance measurements.
          I am using the JNDI and JMS provider functionality of the WebLogic 9.1 app-server but my test program is just pure JMS 1.02 sender/receiver clients - ie it is NOT part of, or deployed as a J2EE application.
          SINGLE MACHINE TEST
          ===================
          In a single machine environment I was able to
          - configure a JMSServer
          - configure a JMSSystemModule
          - configure resources for ConnectionFactories and Queue and Topics
          I then made what I believe to be a 'standalone' application module copied from some mysystemmodule-jms.xml and with that I somehow worked out how to deploy it using the weblogic.Deployer tool.
          The deployment apparently set up the JNDI and my JMS client could gain access to the administered objects and do what it does.
          Everything works.
          TWO MACHINE TEST
          ================
          I now have a second machine.
          I want to put my JMS sender client on this new machine and I want the JMS server and JMS receiver client to be unchanged from the SINGLE MACHINE TEST.
          But I really don't know quite how to proceed from here...
          Do I need to install the WebLogic app-server on the sender machine or is the weblogic.jar all I need?
          What is necessary configuration for JNDI access on the sender machine?
          Can I in fact use my original SINGLE MACHINE server unchanged as I am hoping?
          I don't think I want a "thin" client because I read that performance is impacted (and these are performance tests)
          Remember this is NOT a J2EE application. There is no MDB; no client-container; no descriptors etc. Maybe that makes it more complicated - I don't know.
          Sorry for such basic questions but if somebody can just point me to an appropriate example or tutorial it could save me days...
          Thankyou.

Hi,
          My problem is on similar lines. I have an applet based UI working on RMI/t3 protocol.
          I am using weblogic 9.2 as my app server.
          When my applet is executed on JRE 1.5x it works fine.
          But when I use JRE1.4x it gives the following exception
          java.lang.NoClassDefFoundError: javax/management/InvalidAttributeValueException
          at weblogic.rmi.internal.Stub.<clinit>(Stub.java:21)
          at java.lang.Class.forName0(Native Method)
          at java.lang.Class.forName(Class.java:141)
          at weblogic.rmi.internal.StubInfo.class$(StubInfo.java:34)
          at weblogic.rmi.internal.StubInfo.<clinit>(StubInfo.java:34)
          at java.lang.Class.forName0(Native Method)
          I have analyzed the reason for this.
          the class javax/management/InvalidAttributeValueException was included in java 1.5 and above. So JRE 1.4 does not have it.
          In previous versions of weblogic this class was a part of their 'weblogic.jar' file and in weblogic 9.2 it is not a part of weblogic.jar file so when I am using JRE1.4 and weblogic 9.2 then it obviously does not find this class hence the above exception.
          I tried to put this all together and made custom made client jar file incliding the necessary classes. I was able to get throght this exception only land up in following exception.
          java.lang.VerifyError: class weblogic.utils.classloaders.GenericClassLoader overrides final method .
               at java.lang.ClassLoader.defineClass0(Native Method)
               at java.lang.ClassLoader.defineClass(Unknown Source)
               at java.security.SecureClassLoader.defineClass(Unknown Source)
               at sun.applet.AppletClassLoader.findClass(Unknown Source)
               at java.lang.ClassLoader.loadClass(Unknown Source)
               at sun.applet.AppletClassLoader.loadClass(Unknown Source)
               at java.lang.ClassLoader.loadClass(Unknown Source)
               at java.lang.ClassLoader.loadClassInternal(Unknown Source)
               at weblogic.jndi.WLInitialContextFactoryDelegate.<clinit>(WLInitialContextFactoryDelegate.java:204)
               at weblogic.jndi.spi.EnvironmentManager$DefaultFactoryMaker.<clinit>(EnvironmentManager.java:26)
               at weblogic.jndi.spi.EnvironmentManager.getInstance(EnvironmentManager.java:48)
               at weblogic.jndi.Environment.getContext(Environment.java:307)
               at weblogic.jndi.Environment.getContext(Environment.java:277)
               at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
               at javax.naming.spi.NamingManager.getInitialContext(Unknown Source)
               at javax.naming.InitialContext.getDefaultInitCtx(Unknown Source)
               at javax.naming.InitialContext.init(Unknown Source)
               at javax.naming.InitialContext.<init>(Unknown Source)
          I really need to support clients using Jre 1.4 and Jre 1.5
          I will really appreciate any help on this one.
          Please advise.
          Thank you all.

Similar Messages

How to enable for Internet-Based Client Management existing "intranet" clients

Hello,
Step #1
I have an existing "intranet-only" SCCM 2012 SP1 CU1 environment. It is made of HTTP Intranet-Only MP.
All clients are properly communicated with one of the intranet MP
All clients are leveraging auto-enrollment of our AD PKI and have a working client certificate recognized by SCCM client
Step #2
I expanded the above infrastructure to support IBCM clients. Basically I want the existing intranet clients still be managed when they are outside our network
I added MP, DP, SUP, FSP on dedicated DMZ servers. It has been published on Internet, and properly declared with public DNS
The DMZ MP has been configured for HTTPS / Internet client only
When I tested first this setup in my lab, it was working fine, and my "intranet" client moving to Internet was properly detecting this configuration, and was starting to contact the "DMZ/Internet MP" without any problem
I did the same on my production environment but this time, my client moving to "internet" detectes it is connected on Internet but does not have any clue about the DMZ/Internet MP to contact. According to logfile, it is trying to check on DNS,
WINS, etc. but obviously it is already too late when in Internet, this information is no longer available.
I guess I did something in my lab environment to make it work but I don't what. Any idea how to tell to existing clients they should use a new "Internet-Only" MP when they are on Internet ?
Regards.

Basically I found my problem...
In my lab, I manually configured the SCCM client option Internet-based management point (FQDN) to use the public DNS address of my Internet/DMZ MP.
If I do the same for my production sample client, it works fine now.
Question: how can I enforce this change on all my existing clients ?

Error: Invalid configuration for the JMS adapter

Hi!
I'm doing a test with CEP to get messages from a JMS WebLogic queue but I'm getting the following error:
<BEA-2045010> <The application context "Teste" could not be initialized: org.springframework.beans.FatalBeanException: Error in initialization context lifecycle; nested exception is java.lang.IllegalArgumentException: Invalid configuration for the JMS adapter, you must Bean or specify a converter or a type of event.
Teste.context.xml:
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:osgi="http://www.springframework.org/schema/osgi"
xmlns:wlevs="http://www.bea.com/ns/wlevs/spring"
xmlns:jdbc="http://www.oracle.com/ns/ocep/jdbc"
xmlns:spatial="http://www.oracle.com/ns/ocep/spatial"
xsi:schemaLocation="
http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans.xsd
http://www.springframework.org/schema/osgi
http://www.springframework.org/schema/osgi/spring-osgi.xsd
http://www.bea.com/ns/wlevs/spring
http://www.bea.com/ns/wlevs/spring/spring-wlevs-v11_1_1_3.xsd
http://www.oracle.com/ns/ocep/jdbc
http://www.oracle.com/ns/ocep/jdbc/ocep-jdbc.xsd
http://www.oracle.com/ns/ocep/spatial
http://www.oracle.com/ns/ocep/spatial/ocep-spatial.xsd">
     <wlevs:event-type-repository>
          <wlevs:event-type type-name="Pet">
               <wlevs:class>testewithprotobuf.MyPet$Pet</wlevs:class>
          </wlevs:event-type>
     </wlevs:event-type-repository>
     <wlevs:adapter id="pet_messageAdapter" provider="jms-inbound">
          <wlevs:listener ref="pet_inputChannel" />
          <wlevs:instance-property name="converterBean"
               ref="PetMessageConverter" />
     </wlevs:adapter>
     <wlevs:channel id="pet_inputChannel" event-type="Pet">
          <wlevs:listener ref="pet_messageProcessor" />
     </wlevs:channel>
     <bean id="PetMessageConverter" class="testewithprotobuf.PetMessageConverter" />
     <bean id="PetBean" class="testewithprotobuf.PetBean" />
     <wlevs:processor id="pet_messageProcessor">
          <wlevs:listener ref="pet_outputChannel" />
     </wlevs:processor>
     <wlevs:channel id="pet_outputChannel" event-type="Pet">
          <wlevs:listener ref="PetBean" />
     </wlevs:channel>
</beans>
My converter class:
import java.util.Collections;
import java.util.List;
import javax.jms.BytesMessage;
import javax.jms.JMSException;
import javax.jms.Message;
import testewithprotobuf.MyPet.Pet;
import com.bea.wlevs.adapters.jms.api.InboundMessageConverter;
import com.bea.wlevs.adapters.jms.api.MessageConverterException;
import com.google.protobuf.InvalidProtocolBufferException;
public class PetMessageConverter implements InboundMessageConverter {
     @SuppressWarnings("rawtypes")
     @Override
     public List convert(Message message) throws MessageConverterException,
                                                            JMSException {
          BytesMessage bytesMessage = (BytesMessage) message;
          long bodyLen = bytesMessage.getBodyLength();
          byte[] buffer = new byte[(int) bodyLen];
          bytesMessage.readBytes(buffer);
          try {
               Pet pet = Pet.parseFrom(buffer);
               return Collections.singletonList(pet);
          } catch (InvalidProtocolBufferException e) {
               throw new MessageConverterException(e);
Please, what's wrong?
Thanks!

This error usually indicates that you have both event type and converter bean specified or neither specified. In your case, that doesn't appear to the case from looking at the spring file. Could you also paste the contents of your configuration file from META-INF/wlevs directory?

How to configure for the give senario where we from APO demand planning, we provide baseline forecast into TPM

Hello Guru's,
Request for information on smart documentation on the integration between Trade Promotion Management and SCM-Demand Planning from an architecture perspective how to configure for the give senario where we from APO demand planning, we provide baseline forecast into TPM and from TPM promotions values can be considered in to APO demand planning: can anybody give me some insight on it.
Thanks in advance.
Kumar

Hi Praveen
There are several ways you can connect a DP system to a TPM. How are your interfaces and systems setup?
Option1:
Extract the baseline from APO to a BW cube, extract the data out of BW, may be using infospokes/open hub and pass it on to TPM.
2. Have a custom program written in APO-DP to extract the selected keyfigure data at the aggregation level into an interface or a .txt file into APO directory and use some data transfer service such as EDI to take this data and send to TPM.
In my experience it is simple to define an integration process. The much larger and complicated aspects are the date adjustments and the aggregation levels.
Date adjustments:
Understand the basis of the data in APO and TPM. APO is usually at the requested delivery date or material availability date ( when the customer like a store wants the product). However TPMs are usually at the consumption date ( when an end customer like you and me but from store shelf). Depending on the product and business style this can mean several days difference. Let's say it is 25 days on average, you need to add 25 days to APO base line date to get the TPM consumption date.
Aggregation level:
This can be product or customer. If the planning in DP is at product sku level and the TPM is at packs or brand level, you need to aggregate the data up before loading to TPM. The same with customer.
To me the most complex part of the integration is to understand and transform the data in a meaningful way and a strategy to sustain this integration by keeping both DP and TPM in sync in terms of master data. Also important to have a process for identifying exceptions and failures. you send baseline from DP to TPM and if it fails, how do you know? how do you trouble shoot?
Hope these help.

How to find the Remote Desktop Client Version?

How to find the Remote Desktop Client Version in Lion? I'm asking because in starting up a mid 2011 MacBook Air, I ran Software Update, which determined that Remote Desktop Client version 3.5.1 was available. I wanted to find what the existing version (older than 3.5.1) that came with Lion was, but coudn't find it.
Thanks.

Get Info on:
/System/Library/CoreServices/RemoteManagement/ARDAgent
or if you have Apple Remote Desktop on an administrator system, you can see the workstation client versions by control-clicking in the header in the computer list and selecting to show the ARD version column.
Regards.

Direct Access is working but how do I configure it for remote services, client management software, etc..

Good morning/afternoon/evening TechNet,
I've finally gotten a DA client connected to the corporate network utilizing an external network. I'm having a couple issues, one, not being able to ping the server from a computer that's on the same domain(I'm able to ping the DA client from the DA server).
I'm not sure if there is a firewall setting that needs to be open on the client for incoming echo requests? Second, we use a client management system called BMC and I would like the direct access server to be able to utilize the BMC server so that I can manage
the DA client whenever its on the network. I noticed on the DA server that "Step 3" offers an area where it allows you to add servers that will be used for direct access client management. Would I just need to populate the server in here and then
open appropriate firewall rules so that the DA server has access to them? Lastly, Trying to "mstsc" into the DA client what would I need to open up on both sides so that I'm able to do this?
Sorry about the horrible grammar but I've been up 24+ hours getting this awesome but pain in the butt Direct Access feature working.
Thank you as always!
-Liqsh0t

I'm afraid it's a bit more complicated than adding a server into the list in Step 3 :)
When a DirectAccess client is connecting into a corporate network that is IPv4 (I assume yours is, most are), it can reach into your IPv4 servers because the DA server is doing NAT64/DNS64 translations, turning all of your DirectAccess IPv6 packets into
IPv4 packets before they head inside the network. But even though this happens in the background without you really knowing about it, the key thing there is that all DirectAccess traffic is IPv6. This means the clients can only be contacted via IPv6. If you
have IPv6 inside your network, then you can route outbound fairly easily to your DA client computers. If you are all IPv4 inside as most companies are, then you have to either roll IPv6 out inside your network, at least partially, or you have to utilize ISATAP
inside your network in order to create a sort of "virtual IPv6 cloud" that runs on top of your IPv4 internal network. This enables your internal management systems (like the BMC servers and helpdesk computers for RDP access outbound) to have a connection
into the IPv6 world, which then enables them some routing capability to get out to the IPv6-connected DA clients. In addition to this IPv6 or ISATAP setup, you also need to configure WFAS rules on the DA clients so that they will allow this traffic.
There is some info on setting up ISATAP here: http://blogs.technet.com/b/jasonjones/archive/2013/04/19/limiting-isatap-services-to-directaccess-manage-out-clients.aspx
Otherwise one of the chapters in this book is also dedicated to the setup of a selective ISATAP environment, to be used for the purposes of DirectAccess outward management: https://www.packtpub.com/virtualization-and-cloud/microsoft-directaccess-best-practices-and-troubleshooting

Configure Network Level Authentication for Remote Desktop client

We publish Remote Desktop in our Windows 2008 R2 terminal server.
However, in Windows 2008R2 , the remote desktop client will a lillte bit slow
I found out that if I modify the setting in default.rdp
authentication level:i:0
enablecredsspsupport:i:0
it will increase the speed a lot
however, how can I set all user use remote desktop will disable those feature as well?
Thanks

Hi Kenneth,
I suggest you to see similar thread "disable
Network Level Authentication Terminal Server 2008"
If above thread does not helps, seek help from RDS/TS experts in here.
Or wait until any of our moderator move this post to respective forum.
Thank you for understanding.
Regards, Ravikumar P

How to configure for the price master of the configurable item

in my client we have the configurable items like car doors with different colour as per the color
the price is changing
so how to configure this masterdata for pricing for all the material

Hi
This kindly of process is done at Variant configuration. so the pricing will define in condition type VA00. and the variant process as follows:
Eg: Ford car.If a sale order is raised for fiesta lxi model the system should choose red colour & for vxi blue colour respectively.
ie you need to define the characteristic and assign the values .
This characteristic need to assigned to class.
class need to be assigned to material master
1. T.code : CT04(characteristic) FORD_MODEL, Choose single value & entry required tab & give the input as 01 - fiesta_lxi & 02 - fiesta_vxi.( characteristic values)
2.Tcode: CT04, FORD_BODY( another characteristic)
Choose single value , don't click entry required.
01 - Red( characteristic values)
02- Blue
3. Create class T.code : CL02
fiesta_class
type : 300
4. OBJECT DEPENDENCY:
T.CODE : CT04
FORD_MODEL
CLICK VALUES TAB,
IN FIESTA_LXI CLICK THE 'O' meant for Obj dependency, action & extra.
Edit the dependecy,
010 $Self.ford_body = '01'. & save
Repeat the same for FIEST_VXI & instead of '01' give '02' for blue colour.
, then create a ROH as ford_body. & a KMAT material for the car. .
Then create a Super BOM with usage 3 & give component as ford_body
Then use T.code cu41 (Create config profile)
enter a profile name & class 300 & choose class assignment, choose fiest_class ,
Use T.code cu50 to check the values.
Then create a sale order.
Reward if it helps
Regards
Prasanna R

DHCP configuration for non-compliant clients

So your question isn't for a live situation, but because you are studying for a test?

hello!
i have a question about network policy server..
that is , how to configure DHCP server to lease IP address to non-compliant client??
specifically for access to remediation servers
thank you..
This topic first appeared in the Spiceworks Community

Routing Issue for Remote Access Clients over Site to Site VPN tunnels

I have a customer that told me that Cisco has an issue when a customer has a topology of let's say 3 sites that have site to site tunnels built and a Remote Access client connects to site A and needs resources at Site B but the PIX won't route to that site. Has this been fixed in the ASA?

Patrick, that was indeed true for a long time.
But now it is fixed in PIX and ASA version 7.x.
Please refer to this document for details:
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008046f307.shtml

How to configure oracle 10g with clients

Hello sir i am a database user.
I want to install an oracle 10g (Client server architecture)
As i have a licenced Oracle 10g CD Pack.
Pls help me how to install Oracle & how to configure its clients.
As i have a server(running server 2003 ) in it and corresponding clients.
Thanks
Edited by: user10439074 on Oct 30, 2008 4:03 AM

Read the documentation (I have given following links assuming you are running a 32 bit architecture)
Server installations:
http://www.oracle.com/pls/db102/to_toc?pathname=install.102%2Fb14316%2Ftoc.htm&remark=portal+%28Books%29
Client installations:
http://www.oracle.com/pls/db102/to_toc?pathname=install.102%2Fb14312%2Ftoc.htm&remark=portal+%28Books%29
You can find the required books (if not using 32 bit architecture) from
http://www.oracle.com/pls/db102/portal.portal_db?selected=3

How to configure for Multiple XML

Hi,
We were successful in working with single xml as a input. Now we are using multiple xml as a input for a single transaction. With the references and the suggestion in documents(working with xml files.pdf) related to Documaker we have changed configuration settings in FSISYS.INI and AFGJOB.JDT.
Down below we have mentioned those changes.
Input Extract file has been changed as F_Sch.DAT; following is the content in the extract file
COM_LOB_1111 .\INPUT\F_SCH1.xml
COM_LOB_1111 .\INPUT\F_SCH2.xml
COM_LOB_1111 .\INPUT\F_SCH3.xml
F_SCH1.xml,F_SCH2.xml,F_SCH3.xml
<?xml version="1.0"?>
<global>
     <lm>
          <COM>COM</COM>
          <LOB>LOB</LOB>
          <TRANSACTIONID>121212</TRANSACTIONID>
     </lm>
     <Foodcard>
          <Accname>Alex</Accname>
          <Email>[email protected]</Email>
          <Accid>1234123412341234</Accid>
          <Accno>1234123412341234</Accno>
          <Accaddr1>address1</Accaddr1>
          <Accaddr2>address2</Accaddr2>
          <Accaddr3>address3</Accaddr3>
     </Foodcard>
</global>
Changes to FSISYS.INI
< ExtractKeyField >
Key = 1,3
SearchMask = 1,COM_LOB_1111
< TRN_FIELDS >
COM = 1,3,N
LOB = 5,3,N
PolicyNum = 9,3,N
< DATA >
ExtrFile = C:\FAP\DLL\Computer\INPUT\F_Sch.DAT
AFGJOB.JDT
;ImportXMLFile;2;SCH=1,COM_LOB_1111 15,19
Inspite of those changes that made, we were not able to generate the output using three xml as a input.
***error details.***
[04:16:29PM] Warning: Company - LOB - Transaction
[04:16:29PM] Warning: DM17115: : The DownLoadFAP option is set to Yes, this option should be set to No for optimal performance. Check the RunMode control group, DownLoadFAP option.
[04:16:29PM] Error: Company - LOB - Transaction
[04:16:29PM] Error: DM12041: : FAP library error: Transaction:<>, area:<DXMLoadXMLRecs>
code1:<48>, code2:<0>
msg:<XML Parse Error: The 1 chars before error=<C>, the 20 chars starting at error=< >>.
[04:16:29PM] Error: Company - LOB - Transaction
[04:16:29PM] Error: DM12041: : FAP library error: Transaction:<>, area:<DXMLoadXMLRecs>
code1:<48>, code2:<0>
msg:<syntax error at line 1 column 0>.
[04:16:29PM] Error: Company - LOB - Transaction
[04:16:29PM] Error: DM10292: in <RULXMLExtract()>: Unable to <DXMLoadXMLRecs()>.
[04:16:29PM] Warning: Company - LOB - Transaction
[04:16:29PM] Warning: DM13023: in RCBSendToErrBatch(): Unable to assign the transaction to the error batch. The SentToManualBatch field is not defined in the TrnDfdFile.
[04:16:29PM] Error: Company - LOB - Transaction
[04:16:29PM] Error: DM10947: in NoGenTrnTransactionProc(): Unable to RULLoadXtrRecs(pRPS).
[04:16:51PM] Error: Company - LOB - Transaction
[04:16:51PM] Error: DM12018: in RPDoBaseFormsetRulesForward(): Unable to <WINNOGENTRNTRANSACTIONPROC>().
[04:16:51PM] Error: Company - LOB - Transaction
[04:16:51PM] Error: DM12066: in RPProcessOneTransaction(): Unable to RPDoBaseFormsetRulesForward(pRPS, RP_PRE_PROC_A).
[04:16:51PM] Error: Company - LOB - Transaction
[04:16:51PM] Error: DM12064: in RPProcessTransactions(): Unable to RPProcessOneTransaction(pRPS). Skipping the rest of the transactions for this Base. See INI group:< GenDataStopOn > option:TransactionErrors.
[04:16:51PM] Error: Company - LOB - Transaction
[04:16:51PM] Error: DM12004: in RPProcessOneBase(): Unable to RPProcessTransactions(pRPS).
[04:16:51PM] Error: Company - LOB - Transaction
[04:16:51PM] Error: DM12001: in RPProcessBases(): Unable to RPProcessOneBase(pRPS). Skipping the rest of the Bases for this batch run. See INI group:< GenDataStopOn > option:BaseErrors.
[04:16:51PM] Error: Company - LOB - Transaction
[04:16:51PM] Error: DM12127: in RPRun(): Unable to RPProcessBases(pRPS).
[04:16:51PM] Error: An error occurred during processing.
Kindly let us know in case of any solution for this issue.
Regards,
Balaji R.

It looks like it is unable to load your XML files. Depending on how your configuration is laid out, you may want to list full path names in your extract file - we make use of the same technique in 11.5, which I would imagine isn't terribly different in this respect from 12.0. Our configuration is such that we run Gendata at one level, read an extract file in the deflib folder, and the input files are in an input folder, so each entry in the extract file is C:\fap\mstrres\sampco\input\input1.xml.
Not sure if that is analogous to your setup or not, but based on the errors, either it can't find the file, so it is a pathing issue, or the file contents are invalid.
Tony

How to configure a full JMS Sender Adapter Scenario

Hi guys,
I have to do a JMS -> PI (7.1) -> File scenario, I never used JMS Adapter, and I'd like to tell you what I have done, and what I think is missing.
First I went to the NetWeaver Administrator ->Configuration Management ->Infrastructure ->JMS Server Configuration-> Create ->JMS Queue.. and I created a new Queue from a Virtual Provider (SAP JMS Provider).
The first thing I didn't know how to configure it is which transport protocol I have to choose in the CC adapter (SonicMQ JMS Provider, WebSphere MQ, etc..)
But I also don't know is if there's something missing on the NWA, to create, modify, etc. I read this slide: (https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a05b2347-01e7-2910-ceac-c45577e574e0) where was shown how to create a SAP standard queue, and I also read all the documentation from help.sap.com (all the JMS basics and explanation) but I still don't know how to fully configure the CC and how to trigger the messages.
Please, if you need further information I can give it.
Thanks in advance.
Juan

Hi,
did you try this blog from William?
/people/william.li/blog/2006/11/13/how-to-use-saps-webas-j2ees-jms-queue-in-exchange-infrastructure
Regards,
Michal Krawczyk

How to configure for GPlus Adapter with SAP Phone and SAP CRM

Hi All Basis Adm,
Please consider as an urgent basis i need the information that how to configure GPlus Adapter with SAP Phone and SAP CRM . My server is CRM 5.0 (kernel 7) with Oracle Database. This information is require to connect Webclient to Sap Phone with GPlus Adapter (Genesys Adapter 7.1). If u have any document regarding mentioned above than that will be acceptable.
Regds,
Govinda

Hi Prasad,
In you case, it's a file to file scenario.
Go thro' this link for a solution:-
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
Regards.
Praveen

How to configure for zimbra mail, How to configure for zimbra mail, How to configure for zimbra mail

How to configure the iphone for zimbra mail?
have anyone used zimbra mail in iphone mail settings?
I'm able to access zimbra through safari...
But what is the configuration needed to be done to see in mail box?

Contact Zimbra support and ask them.

How to configure for remote JMS client?

Similar Messages

Maybe you are looking for