How to find the Remote Desktop Client Version?
How to find the Remote Desktop Client Version in Lion? I'm asking because in starting up a mid 2011 MacBook Air, I ran Software Update, which determined that Remote Desktop Client version 3.5.1 was available. I wanted to find what the existing version (older than 3.5.1) that came with Lion was, but coudn't find it.
Thanks.
Get Info on:
/System/Library/CoreServices/RemoteManagement/ARDAgent
or if you have Apple Remote Desktop on an administrator system, you can see the workstation client versions by control-clicking in the header in the computer list and selecting to show the ARD version column.
Regards.
Similar Messages
-
The Remote Desktop Client software is not active
Hello
I just downloaded ARD from the App store. I installed ARD Client 3.4 on the Client machines. Activated the machines in Sharing. All Users with everything checked except for "Show when being observed"
I am able to Observe, Control, Curtain and Lock.
I just tried to start a chat with a client and got the following error:
Unable to Chat with “WebVantage’s iMac”. The Remote Desktop Client software is not active.
I try to send a Message and get the following error:
This task will fail. This task is not supported on “WebVantage’s iMac”.
...with the choices Continue or Go Back
Try to run reports and it just seems to go on forever and says "Waiting for report data."
Many of the other choices won't work either, like Sleep, Wake, etc.
Am I missing something?
Thank you, in advance, for your time.
CoochWOW! It's been over a month and not one reply? First time this ever happened.
I am finding that I cannot lock the other Macs now. I get:
"This task will fail. This task is not supported on “XXXXX’s iMac”."
Anyone?
Message was edited by: J Cooch Lucchese -
Specifying port in Remote Desktop Client Version 2.0
Hi,
I have a windows PC behind a router that I am trying to remote desktop to from my iMac. I am using the remote desktop client v2.o which I have downloaded from http://www.microsoft.com/mac/downloads.mspx?pid=Mactopia_RDC&fid=803F9438-8DF3-4 90F-92C6-0E0F92787DB8#viewer
As I am port forwarding on the router to the PC's private IP address, I need to be able to hit port 4000 on the router. When I type in the <hostname>:4000 on the iMac's remote desktop client, it does not like the port number. Would anyone know how I can establish a connection to a port other than 3389 using the Remote Desktop Client from my iMac?
Thanks in advance.Hello BH,
Thank you for replying and posting the link you did. I would not like to change the listening port on the server side. From the remote desktop client, I would like to change the port that it makes a connection to. By default, if you type in a hostname, the client connects to port 3389. I would like it to establish a connection with port 4000 of the server.
Please let me know if you have any recommendations on how to do this. Thanks. -
How to find the jre and j2ee version on RAD?
How to find the jre and j2ee version of RAD 6.0?
Hi Zhenglin,
You meen to say we have to create two custom fields, one each for the latitude and longituude. Once created, how do we upload the latitude and longitude based on address could you please expalin by giving some sample code.
Thanks in advance.
Thanks and regards,
Deepika C -
Hi All,
I installed a wrong version of Apple remote desktop client , 2.10 and the sharing menu under system preferences vanished. I tried to uninstall the Apple remote desktop with,
http://support.apple.com/kb/HT2577
but no luck, but after restarting the macbook pro with lion 10.7.2, i see my sharing option enabled but when clicked, it says the system preference has to restart and confirming that it restarts in 32 bit mode and even after clciking the sharing option it says, "you can't open sharing preferences because it doesn't work on an intel-based mac"
. So i strongly believe the apple remote desktop is creating the issue.
Can someone help how to fix this please?
ThanksSame problem here. I manage several remote Macs, but I have one MacBook which I can get no ARD access to (black icon). I can ping the IP, I can SSH into the MacBook, the ARD and Remote Login services are checked ON, the firewall is OFF. The ARD service is configured to allow my admin user full access - however, I get nothing. I have no trouble getting into the other Macs.
Any ideas? -
Problem with remote desktop client update
I find it interesting that since Screen Sharing is available, and works "just fine" that a Remote Desktop Client would be needed to be installed.
I installed it, but I'm not sure why.
I found the updated application in /System/Library/Core Services/RemoteManagement/ARDAgent
Which is also where the screen sharing and vnc bundles live. I clicked on it to see what would happen -- nothing.
I found these ports in another discussion
TCP and UDP port 3283
TCP and UDP port 5900. (Also used for Screen Sharing in OSX 10.5 and later)
port 22
This page confirms their use along with the use of other ports:
TCP and UDP ports used by Apple software products - Apple Support
Additionally TCP port 5432 is used by ARD
Having recently noticed (through "network utility" that my computers have had a "ton" of open connections.
This severely hurt system performance.
I note that neither my Airport Express nor my Mac can set up a firewall on these ports.
While I haven't noticed the ARD ports being used, I cannot help but wonder if this is set up for a CIA/NSA backdoor into my computers.
On a less paranoid level, perhaps Apple is planning on adding on-line help to debug our problems in "real-time". ;-) -
How to install the Remote Desktop Services role on a Windows 2012 R2 Server
Hello,
I am a bit confused on how to install the RDP role on a 2012 R2 server. I have a two server domain and would like to make the second member server an RDP server to host applications (Word, Excel, a medical software, etc.) where users from their windows
7 desktop will use the Remote Desktop Connection to connect to the server, create a session and do their work. When installing the role, I am prompted with two options:
1- Role-based or feature based installation
2- Remote Desktop services installation
I see the RDP install option in both cases.
1- Which one do I use?
2- What role services do I install? (Connection broker, Gateway, Licensing, Session Host, Virtualization host and Web access). I think I need the first four only.
3- When installing software after RDP, I use the Change user /install and Change user /execute commands. What happens to the software that is already installed? Can remote
users use those?
Any help will be very much appreciated.
Thank You,
Victor.TP,
Thank you for your response. I added the RD Licensing thru the Role-based option.
Also opened the local group policy thru gpedit.msc and added the server name and the licensing mode type to Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session
Host -> Licensing
Use the specified RD license servers = NameOfMyServer
Set the Remote Desktop licensing mode = TypeOfMyLicense (Per User in my case)
Thank you again,
Victor -
How to capture the remot desktop using RMI?
Hi friends..
I am doing a mini project to capture the remot desktop using RMI. I am very new with this subject. So 'm waiting for the help of experts...You can't. RMI doesn't do that. After you have captured it, some other way, you can transmit it via RMI, or plain Sockets, or several other ways.
-
How to login the remote desktop with user id and password using coded ui
we are using vs 2013, we have automated some automated test cases using coded ui. i have on problem while i am running the those test cases in remote system. here the scenario is "after executed one test case we need to restart the system. After restarted
I have to login the remote system with user credentials to continues execution for the remaining test cases." it is very helpful to me.. so please guide me how to overcome these problem?
Thanks in advance ...Hi Divakar,
As far as I know, there isn’t this feature of remote test in VS2013.
I suggest that you could submit this feature request:
http://visualstudio.uservoice.com/forums/121579-visual-studio. The Visual Studio product team is listening to user voice there. You can send your idea there so the others can vote it. If you submit this suggestion, you might post that link here which will
benefit others who has the similar issue
Regards
Starain
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How to find "the remote button" in iTunes 11
I spent about 20 minutes trying to figure out how to re-connect my iPhone Remote app to my computer, so hopefully I can save some people some time:
When you open the app and try to re-connect your iTunes library, it will give you a code, and some bizarre directions.
(If you have not done so already, go to "View" on the top bar, then "Show Sidebar")
On the sidebar, you will see 'DEVICES' as category.
**Click the little icon next to your device, and enter the code***Like everyone else here, I have spent hours trying to figure this out, looking for the Devices category in the Sidebar and then Remote. Nothing worked, until I finally figured it out. I think this method is foolproof...:-)
1. Open iTunes and make sure it is connected to your home network.
2. Go to "View" on the top bar and then "Show Sidebar". You should see Music, Films, etc, BUT YOU WILL NOT SEE ANY 'DEVICES', not just yet.
3. Now, go to your iPad/iPhone, make sure it is connected to the SAME home network. Open the Remote app on your iPad/iPhone.
4. Go to 'Add an iTunes Library'. You will get a four-digit code
5. Now, look at the sidebar. Now suddenly you will you see your iPad, under the newly-appeared 'Device' category, listed as "(Name's) iPad"
6. Click on this new iPad icon in the sidebar. Four boxes appear in iTunes for you to enter the code from the iPad
Done!
The mystery is that your iPad/iPhone does not appear in Devices UNTIL you 'ping' iTunes requesting to control it remotely.
I also had firewall problems with McAffee. If the above doesn't work, TURN OFF all your firewalls and try again. If that solves the problem, you need to open a port on Mcaffee for access from devices on your network. -
How to find the Invoice workbench form version
Hi Everyone,
where i can get the Invoice workbench form version of the APXINWKB.fmb form.
Kindly reply as soon as possible.
Thanks
AtulFrom the application, click on Help > About
From the OS, use "adident" or "strings -a" command to get the Header details.
Please search old threads before posting similar questions as this question was asked many times before -- http://forums.oracle.com/forums/search.jspa?threadID=&q=adident&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein -
How to find the error when client proxy is not successfully triggered?
Hi all,
I want to consume a .NET service in SAP.
But when I want to test the client proxy the following error occur:
GENERAL_ERROR Error duing proxy processing (PART
UNKNOWN (NULL) )
Transaction ST11:
TRACE SOAP RUNTIME - trace records
E CONTEXT 20090518061404.5255720 : CL_SOAP_CONTEXT ->SET_FAULT
SOAP runtime fault handling
E SOAP_RUNTIME 20090518061404.5256990 : CL_SOAP_RUNTIME_CLIENT
->EXEC_PROCESSING Exception handling in SOAP runtime
E CONTEXT 20090518061404.5255620 : CL_SOAP_CONTEXT ->SET_FAULT set
fault loop detected
E SOAP_RUNTIME 20090518061404.5256920 : CL_SOAP_RUNTIME_CLIENT
.NullPointerException:
Transaction SM21:
SOAP Runtime Protocol: SOAP Fault exception occurred in program CL_SOAP_RUNTIME_ROOT==========CP in include CL_SOAP_RU NTIME_ROOT==========CM004 at position 80
SOAP Runtime Protocol: Exception message: Severe processing error; SOAP fault handling required
How can I find what's wrong????
This error logging is not really helpful to me...
Any ideas?
regardsHello Mr. Bauer,
Will you please elaborate on your solution to fix this issue?
We are facing this issue too.
Thanks in advance.
Regards,
Victor -
What exactly is the Remote Desktop Client Update
?
If you're not being managed by another Mac that has ARD, then you don't need the client update. If you plan on managing other Macs with ARD then you need to buy the admin software.
-
Can you give me a step by step on getting the client and the admin part of remote desktop to work? I am new to this and I need for remote desktop to work to install the Faronics Deepfreeze enterprise console on the new imac in office. The OSx version is 10.8.3 Any help will be greatly appreciated. Also, when I go to install the admin, it says that the remote desktop client is not updated and I cant get mac app store to show any updates. May be doing something wrong.
This is what I usualy do to setup ARDclient on a client computer.
on the client computer
go to menu bar (white bar at top of the screen)
click on the apple menu
chose system preferences
click show all button
click Users & Groups
click the lock to unlock
click + to create a new account
chose new account: type "administrator"
name the user some thing applicable like "ARDuser"
set a secure password
click create account
click show all button
click sharing
set the computer name to some thing descritpive that identifies the computer
check remote login
click on remote login
set allow access for: "only these users"
click the +
chose the ARDuser from the list
click select
check remote management
click on remote management
set allow access to "only these users"
click the +
select the ARDuser from the list
click select
check: observe, control, genereate reports, open & quite applications, delete and replace items, start text chat or send messages, restart & shutdown, copy items
click ok
click the lock to lock system preferences
click show all
quite system preferences
At this point you should be able to connect to the client using Apple Remote Desktop using the ARDuser setup above. Make sure the client and the ARD computer are on the same network the same way. IE both on ethernet or both on wifi. On the same internet conenction, if your were trying to conenct to a client over the internet there is more involved.
on the ard computer:
open apple remote desktop
from the left column select discover
make sure the list is set to bonjour
the client computer should show up on the list, with the name set above
select the client from the list
click control
you will be prompted for the user/pass to log into the computer. that's the ARDuser setup in the steps above. -
Remote Desktop Client Update not able to install? Any workarounds to get it to install?
Thanksdo you know the exact verion of the remote desktop client update? Have you tried downloading the update manually from the apple website?
Have you tried a safeboot and then installing the update?
Maybe you are looking for
-
Initialize a member of custom class
Hi All, I want to initialize the oOwnMovie of CMedia class by this below ....................... code example below class CMedia extends MovieClip{ public var oOwnMovie:MovieClip; public function LoadMe() trace(this.oOwnMovie instanceof MovieClip); /
-
Need Help.... Posted: Dec 14, 2006 4:44 AM in response to: Jayanthi Jayara... Reply E-mail this post Hi, Is there some bug in Smartform or something?? Shouldn't be a problem in my codes. Why is my 2nd row of data (starting from 2nd
-
Enable Novalidate a table constraint
I created a table with a unique constraint on one column DISABLED. I then proceeded to insert duplicate data in this field. When I try to ENABLE NOVALIDATE this constraint, I get the error ORA-02299: cannot validate (SCOTT.SARAH_U) - duplicate keys f
-
What is going on? I have never had this problem until I updated to OS 10.10.1. Now apple Tech Support wants to charge me to look into it. It crashes with no error message.
-
IMAQdx 14.5 breaks compatibility with IMAQdx 14.0?
Hello, I deployed an application that used IMAQdx 14.0 to acquire images from a GigE camera and save them to disk. Nothing fancy. Recently, I upgraded my development PC to IMAQdx 14.5. As a result, the executables I create no longer run on the same d