How to configure JCA DBAdapter logging in OSB 11.1.1.4.0?

How to configure JCA DBAdapter logging in OSB 11.1.1.4.0?
I have a project deployed to the new 11.1.1.4.0 version of OSB.
Under previous versions, a $DOMAIN-diagnostic.log file was maintained and contained a record of the activity of the various JCA DB pollers I had configured.
In the most recent version, this is not the case.
I'd like to know if I can restore the old behaviour...
The best solution I could come up with is to change a setting in $DOMAIN/alsbdebug.xml, thus:
<java:sb-debug-logger xmlns:java="java:com.bea.wli.debug">
<java:alsb-jca-framework-adapter-debug>true</java:alsb-jca-framework-adapter-debug>
</java:sb-debug-logger>
With this change the pollers put their logging output into the $DOMAIN.log file.
How can I get the output back into $DOMAIN-diagnostic.log?

Alex,
Oracle B2B does not support custom HTTP listening channels as of now. There are below two default HTTP listening channels for async Request-Response scenarios -
http://host:port/b2b/transportServlet or http://host:port/b2b/httpReceiver
and below one is used for synchronous request-response scenarios -
http://host:port/b2b/syncreceiver
where host - B2B server host and port is B2B server port.
Regards,
Anuj

Similar Messages

OWB 10gR2 : How to configure ctl and log locations for Sql*Loader mappings?

Hi all,
I'm using OWB 10gR2 to load data in tables with Sql*Loader mappings.
In my project I have a datafile module and an Oracle module.
When creating an sql*loader mapping in the oracle module, there is two properties for this mappings that I want to modify. The first is Control File Location and the second is Log File Location. Values for those properties are equal to the data file module location. When trying to change those values I can only chose "Use module configuration location".
Somebody knows how to configure those properties with different locations as the one of the flat file module?
What I want to do is to store the data file in one directory, and control file and log file in other directories.
Thank you for your help.
Bernard

Hi,
You're right, my problem is that the dropdown only show the location associated with the flat file location even if I have other file locations created in the design repository.
The good news is that I have found the solution to solve the problem :
1) Edit the file module and in tab "Data locations", add the locations you want to use for control file and log file.
2) Open configuration window of the mapping and then the dropdown for properties Control File Location and Log File Location show new locations
I have tested my mapping after changing those properties and it's working.
Bernard

How to have project specific logs in OSB

Hi
I make log entry in osb using Log Action and it works, as i can see logs in Server's log file. But it contains other log entries also...
But i dnt know how do i have separate log file for my projects in OSB, ie how do have separate log file ,where only logs made through Log Action is tracked.
Thanks

Need help in logging the response in single file
Regards,
Anuj

How to configure the system log on Mac OS X???

Now the system log is removed one week after the creation but I need to store it permanently.
How to do it??

Eugene Mirgorodskiy wrote:
Now the system log is removed one week after the creation but I need to store it permanently.
It's not really "removed". The system log is "rotated" out, at least partly to avoid having it grow too large. The older log information is in a series of files named like "system.log.0.bz2, system.log.1.bz2, etc. A file of type ".bz2" is a particular type of compressed file. Eventually the oldest of those files will be deleted. If you want to keep those forever, I'd copy off the oldest of those files on a regular basis to some other location.

How to configure a seperate log file in ALSB

We have arequirement where we need to write ALSB Log action statements into a seperate log file.
Can some one explain on this.

You are right, that should work. Have you tried to do System.getEnv() and list all the env variables in the JVM? Maybe you are not querying with the right KEY since it is case sensitive.
In a cluster logging everything to a single file is typically a bad idea, because it creates a botleneck on the OS and does not help debug local issues. If this is an important requirement for you I would consider using a database or a JMS queue for this. In last resourt you can also use some shared file system.
I don't think there is anything provided out of the box by WLS logger. You can ask the WLS experts.
Gregory Haardt
ALSB Prg. Manager
[email protected]

How to configure SMTP server in OSB eclipse platform

how to configure the SMTP server in OSB eclipse platform......
secondly.................the output email shud contain message sent and not the overview of the mail how do i do it

How to configure the server? That depends on what server it is. If you are the administrator I would suggest finding the help file for the server and searching for the term "relaying". However I hope you are not, and can ask the real administrator.

How to rotate Apache2.2/logs/access_log without restarting AMS 5.0.1 on AWS.

The Adobe Media Server 5.0.1 docs say that Logging.xml controls rotating of the Apache access_log file but its not rotating and I don't see how to configure it in Logging.xml.
Logging.xml takes care of the AMS log files like Access.log but it doens't seem to handle the Apache logs. I've seen where you use logrotated to rotate the Apache logs, then issue a "reload" to the service, but AMS controls Apache and the AMS service only supports start, stop, and reload which takes a minimum of 5 to 10 seconds to reload the server. How can I rotate the Apache logs using Logger.xml or how can I issue a reload directly to Apache when the AMS scripts control it?
http://help.adobe.com/en_US/adobemediaserver/configadmin/WS5b3ccc516d4fbf351e63e3d119f2926 0bd-7ffa.2.3.html

To rotate the apache logs you need to pipe them through a third party tool (i saying that there may be something in apache I may have read once, however here is a tried and tested solution assuming you are on linux), Logging.xml is only for FMS (well it was for 4.5.5 and before).
Download cronolog (http://cronolog.org/)
Change your log directive
From: CustomLog "logs/access.log" combined
To: CustomLog "| /mnt/apps/cronolog/sbin/cronolog -S /mnt/fms/Apache2.2/logs/access_log /mnt/fms/Apache2.2/logs/%Y%m%d_access.log" combined
Restart apache
You logs will now roll daily on the first time they are written toie the logs dont roll at midnight, but the first time they are written to after midnight (so if no one access your server on a day, there will be no log for that day)
The above example makes the assumptiosn:
FMS apache is installed in /mnt/fms/Apache2.2 and you want to use its log dir
cronolog installed in /mnt/apps/cronolog/

OSB: Cannot acquire data source error while using JCA DBAdapter in OSB

Hi All,
I've entered 'Cannot acquire data source' error while using JCA DBAdapter in OSB.
Error infor are as follows:
The invocation resulted in an error: Invoke JCA outbound service failed with application error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapter1/RetrievePersonService [ RetrievePersonService_ptt::RetrievePersonServiceSelect(RetrievePersonServiceSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'RetrievePersonServiceSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/soademoDatabase].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.soademoDatabase'. Resolved 'jdbc'; remaining name 'soademoDatabase'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
JNDI Name for the Database pool: eis/DB/soademoDatabase
JNDI Name for the Data source: jdbc/soademoDatabase
I created a basic DBAdapter in JDeveloper, got the xsd file, wsdl file, .jca file and the topLink mapping file imported them into OSB project.
Then I used the .jca file to generate a business service, and tested, then the error occurs as described above.
Login info in RetrievePersonService-or-mappings.xml
<login xsi:type="database-login">
<platform-class>org.eclipse.persistence.platform.database.oracle.Oracle9Platform</platform-class>
<user-name></user-name>
<connection-url></connection-url>
</login>
jca file content are as follows:
<adapter-config name="RetrievePersonService" adapter="Database Adapter" wsdlLocation="RetrievePersonService.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/DB/soademoDatabase" UIConnectionName="Connection1" adapterRef=""/>
<endpoint-interaction portType="RetrievePersonService_ptt" operation="RetrievePersonServiceSelect">
<interaction-spec className="oracle.tip.adapter.db.DBReadInteractionSpec">
<property name="DescriptorName" value="RetrievePersonService.PersonT"/>
<property name="QueryName" value="RetrievePersonServiceSelect"/>
<property name="MappingsMetaDataURL" value="RetrievePersonService-or-mappings.xml"/>
<property name="ReturnSingleResultSet" value="false"/>
<property name="GetActiveUnitOfWork" value="false"/>
</interaction-spec>
</endpoint-interaction>
</adapter-config>
RetrievePersonService_db.wsdl are as follows:
<?xml version="1.0" encoding="UTF-8"?>
<WL5G3N0:definitions name="RetrievePersonService-concrete" targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N0="http://schemas.xmlsoap.org/wsdl/" xmlns:WL5G3N1="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N2="http://schemas.xmlsoap.org/wsdl/soap/">
<WL5G3N0:import location="RetrievePersonService.wsdl" namespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService"/>
<WL5G3N0:binding name="RetrievePersonService_ptt-binding" type="WL5G3N1:RetrievePersonService_ptt">
<WL5G3N2:binding style="document" transport="http://www.bea.com/transport/2007/05/jca"/>
<WL5G3N0:operation name="RetrievePersonServiceSelect">
<WL5G3N2:operation soapAction="RetrievePersonServiceSelect"/>
<WL5G3N0:input>
<WL5G3N2:body use="literal"/>
</WL5G3N0:input>
<WL5G3N0:output>
<WL5G3N2:body use="literal"/>
</WL5G3N0:output>
</WL5G3N0:operation>
</WL5G3N0:binding>
<WL5G3N0:service name="RetrievePersonService_ptt-bindingQSService">
<WL5G3N0:port binding="WL5G3N1:RetrievePersonService_ptt-binding" name="RetrievePersonService_ptt-bindingQSPort">
<WL5G3N2:address location="jca://eis/DB/soademoDatabase"/>
</WL5G3N0:port>
</WL5G3N0:service>
</WL5G3N0:definitions>
Any suggestion is appricated .
Thanks in advance!
Edited by: user11262117 on Jan 26, 2011 5:28 PM

Hi Anuj,
Thanks for your reply!
I found that the data source is registered on server soa_server1 as follows:
Binding Name: jdbc.soademoDatabase
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 80328036
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/291])/291
Binding Name: jdbc.SOADataSource
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 92966755
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/285])/285
I don't know how to determine which server the DBAdapter is targetted to.
But I found the following information:
Under Deoloyment->DBAdapter->Monitoring->Outbound Connection Pools
Outbound Connection Pool Server State Current Connections Created Connections
eis/DB/SOADemo AdminServer Running 1 1
eis/DB/SOADemo soa_server1 Running 1 1
eis/DB/soademoDatabase AdminServer Running 1 1
eis/DB/soademoDatabase soa_server1 Running 1 1
The DbAdapter is related to the following files:
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ connectors\ DbAdapter. rar
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ DBPlan\ Plan. xml
I unzipped DbAdapter.rar, opened weblogic-ra.xml and found that there's only one data source is registered:
<?xml version="1.0"?>
<weblogic-connector xmlns="http://www.bea.com/ns/weblogic/90">
<enable-global-access-to-classes>true</enable-global-access-to-classes>
<outbound-resource-adapter>
<default-connection-properties>
<pool-params>
<initial-capacity>1</initial-capacity>
<max-capacity>1000</max-capacity>
</pool-params>
<properties>
<property>
<name>usesNativeSequencing</name>
<value>true</value>
</property>
<property>
<name>sequencePreallocationSize</name>
<value>50</value>
</property>
<property>
<name>defaultNChar</name>
<value>false</value>
</property>
<property>
<name>usesBatchWriting</name>
<value>true</value>
</property>
<property>
<name>usesSkipLocking</name>
<value>true</value>
</property>
</properties>
          </default-connection-properties>
<connection-definition-group>
<connection-factory-interface>javax.resource.cci.ConnectionFactory</connection-factory-interface>
<connection-instance>
<jndi-name>eis/DB/SOADemo</jndi-name>
          <connection-properties>
               <properties>
               <property>
               <name>xADataSourceName</name>
               <value>jdbc/SOADataSource</value>
               </property>
               <property>
               <name>dataSourceName</name>
               <value></value>
               </property>
               <property>
               <name>platformClassName</name>
               <value>org.eclipse.persistence.platform.database.Oracle10Platform</value>
               </property>
               </properties>
          </connection-properties>
</connection-instance>
</connection-definition-group>
</outbound-resource-adapter>
</weblogic-connector>
Then I decided to use eis/DB/SOADemo for testing.
For JDeveloper project, after I deployed to weblogic server, it works fine.
But for OSB project referencing wsdl, jca and mapping file from JDeveloper project, still got the same error as follows:
BEA-380001: Invoke JCA outbound service failed with application error, exception:
com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapterTest/DBReader [ DBReader_ptt::DBReaderSelect(DBReaderSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'DBReaderSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered not retriable, likely due to a modelling mistake.
It almost drive me crazy!!:-(
What's the purpose of 'weblogic-ra.xml' under the folder of 'C:\Oracle\Middleware\home_11gR1\Oracle_OSB1\lib\external\adapters\META-INF'?
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

How to configure proxy services in OSB for Rest based services?

how to configure proxy services in OSB for Rest based services implemented using Jersey (Rest).
The Client need to contact OSB proxy servies by posting application/xml using jersey client and OSB proxy service will call the OSB business service.
i would like to know how to get this request in OSB proxy service and send it to the business service and get the response back.

I would suggest you refer to the below links:
https://blogs.oracle.com/jeffdavies/entry/restful_services_with_oracle_s_1
https://blogs.oracle.com/jamesbayer/entry/using_rest_with_oracle_service
Hope this helps.
Thanks,
Patrick

JCA DBAdapter configuration using JDeveloper 11g

hello,
I cannot create correct wsdl files for the jca WSDL-based business service :-(
I try to use JCA dbAdapter in OSB 10.3.1
following guideliness from
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/jcatransport/transport.html
and
OSB DBAdapter Demo (but it refers to JDev 10gR3 :-( which allows creation of DBAdapter component)
in Jdev 11g, I can create such components only inside SOA project
and no bindings are generated inside the wsdl (they are in composite.xml)
is there a way to automatically use the wizard to create the correct wsdl (or I have to write it on my own)
thanx in advance
regards
yannis
Edited by: ydes on May 11, 2010 1:01 PM

Hi Yannis,
You can use the DB Adapter created with JDeveloper 11g on OSB 11g.
The only difference from OSB/JDev 10g is that you will import a JCA file (along with WSDL and its dependencies) from JDev 11g into OSB 11g.
Then you just need to right click on the JCA file and select 'Oracle Service Bus / Generate Service' and OEPE will automatically create the business service and the respective wsdl.
Hope it helps.
Regards,
Rodrigo

How to find out logs related to which server, If i have 2 WFE's in the farm. How to configure logs path?

Hi,
I got this doubt, when searching logs on the servers. I have 2 WFE's in my farm, I got an error from enduser. So in which WFE server i need to check the logs.
How to configure logs path. Is it is possible to specify logs path on our own instead of 14 hive folder.
Badri

That is a really bad idea, especially with idle disconnects and other unreliability of CIFS.
You should instead check out the command
Merge-SPLogFiles which will allow you to combine ULS logs from multiple servers into a single file.
You can certainly specify your own path, but the path must be available on all servers. For example, if you specified D:\Logs, D:\Logs must exist on all SharePoint servers within the farm.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Osb 11 : How to configure tuxedo business services in a clustered domain.

Hi,
We have a platform with a clustered domain Osb ( 1 admin server and 2 managed servers dispatch on several physical servers) and two Tuxedo instances offering the same service exported in 2 different gateways on each Tuxedo instance.
How to configure a business service with tuxedo transport working on this platform with failover and load balancing ?

Thanks for the answer but it doesn't work.
The fact is that we work on OSB 11, not directly in WebLogic.
And Osb always modify the WTC configuration even if we modify it before in weblogic.
To define a business service with multiple remote access points and apply a load balancing algorythm, Osb need an URI for each remote access point (not for each imported service).

How to configure Security services in OSB 11g..

We are integration OSB with BANK application, we will be using SSL certificate for the same.
Please help how to configure security policy in OSB.
I checked below link policy defination
http://tim.blackamber.org.uk/?p=825
but in OSB proxy service we are not able see Policy button.
Please help.
Thanks,
Mihir

Please post your query in SOA Suite forum -
SOA Suite
Regards,
Anuj

How to configure weblogic log file?

HI
How do i configure Weblogic server log file to log weblogic related information as well as my application?
I need to maintain one log file for weblogic and my application.
Thanks,

Then glassfish instance is either not configured yet or installed somewhere else. Try looking under your user's home directory like C:\Documents and Settings\<username>\Application Data\glassfish\domains\domain1\logs

How to configure IPS 4240 - K9 to send log file to syslog server

I am looking for the commands in how to configure IPS 4240-k9 to send log file to SYSLOG server. If anybody has or came across similer issue please advice.
Thanks in advanced.

Ali -
I am sorry to tell you, but the Cisco IPS Sensors do not send Syslog messages. Your only options for sending signature event information are:
SDEE (an TLS Encrypted XML formatted message) the sensor is the SDEE Host and your event receiver (MARS, IME, Intelitactics, etc) is the client.
SNMP Traps - You need to set the "Action" on each signature you want the sensor to send a trap.
- Bob

How to configure JCA DBAdapter logging in OSB 11.1.1.4.0?

Similar Messages

Maybe you are looking for