How To Configure Maven With Weblogic 10.3.1 With JDK6

Hi,
I have recently upgraded my JDK from 1.5 to 1.6. Can any one help what changes is needed for using Maven for remote deployment with JDK 1.6.
Regards,
Swain

Hi,
I am getting the below error when using Maven with JDK6
[INFO] --- weblogic-maven-plugin:2.9.1:deploy (default-cli) @ Spring-JDBC ---
[INFO] Weblogic Deployment beginning with parameters DeployMojoBase[adminServerHostName = 10.60.246.49, adminServerProtocol = t3, adminServerPort = 8003, userId = weblogic, password = system103, artifactPath = D:\EspaceDeTravail\Projets\MigrationPiloteDiargramme\workspace\Spring-JDBC\target/Spring-JDBC-1.1, projectPackaging = war, name = Spring-JDBC, targetNames = MDAD1, remote = true]
[INFO] Weblogic Deployment parameters [-adminurl, t3://10.60.246.49:8003, -username, weblogic, -password, system103, -verbose, -noexit, -name, Spring-JDBC, -targets, MDAD1, -upload, -source, D:\EspaceDeTravail\Projets\MigrationPiloteDiargramme\workspace\Spring-JDBC\target/Spring-JDBC-1.1.war, -deploy]
weblogic.Deployer invoked with options: -adminurl t3://10.60.246.49:8003 -username weblogic -verbose -noexit -name Spring-JDBC -targets MDAD1 -upload -source D:\EspaceDeTravail\Projets\MigrationPiloteDiargramme\workspace\Spring-JDBC\target/Spring-JDBC-1.1.war -deploy
[INFO] ------------------------------------------------------------------------
[INFO] BUILD FAILURE
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 33.218s
[INFO] Finished at: Wed Mar 09 11:48:29 CET 2011
[INFO] Final Memory: 7M/43M
[INFO] ------------------------------------------------------------------------
[ERROR] Failed to execute goal org.codehaus.mojo:weblogic-maven-plugin:2.9.1:deploy (default-cli) on project Spring-JDBC: Exception encountered during artifact start: weblogic.deploy.api.tools.deployer.DeployerException: Unable to connect to 't3://10.60.246.49:8003': invalid type code: 31. Ensure the url represents a running admin server and that the credentials are correct. If using http protocol, tunneling must be enabled on the admin server. DeploymentManagerCreationException: ServerConnectionException: CommunicationException: failed to unmarshal class weblogic.security.acl.internal.AuthenticatedUser; nested exception is:
[ERROR] java.io.StreamCorruptedException: invalid type code: 31
[ERROR] -> [Help 1]

Similar Messages

How to Configure and Use Oracle's JMS Connector with Tibco EMS

Jeff,
I am getting the below exception while try to do the deployment of the sample provided on 'How to Configure and Use Oracle's JMS Connector with Tibco Enterprise for JMS'
While deployment not able to get the 'TibcoJMSReference',
As I understand in the 'orion-application.xml for the below, unable to get the instance. Could you adivce how I can enable the trace more?
<resource-provider class="com.evermind.server.deployment.ContextScanningResourceProvider" name="TibcoJMSReference">
could you help to resolve the issue?
Error
Operation failed with error: No resource named 'TibcoJMSReference/TibcoXACF'found

Hi,
I'm also looking for the same 'Configure and Use Oracle's JMS Connector with Tibco JMS to consume message'. If you have already implemented and working fine, please let me know the steps and some documents.

How to Configure Listener in Weblogic 6.0

I have depoloyed my java application (war) in weblogic 6.0
This application has to behave as a listener for a client socket call on a particular port (say 5588).
This thing works fine in my WSAD environment with the internal server.
How do I configure Listener in Weblogic 6.0 so that my deployed application starts accepting socket call as a listener?
Please Suggest............

Here's the flow...
1) My application is deployed in Weblogic 6.0/7.0. It has to do an additional task of listening on an internal port (say 5588) apart from exposing server socket on say port 4499.
2) My application during startup calls a servlet and via servlet init and routing thereby to different classes my application becomes ready to behave as Client Socket on 5588. I am copying web.xml along with this mail. Please review the web.xml and let me know if it s good enough to invoke the servlet during startup?
3) A standalone java application tries to connect to my application mentioned above on port 5588 via a socket (localhost, 5588). Somehow my application doesnt seems to get hit. I did netstat and port was in listening mode.
4) 5588 being an internal port, I dont think it needs to be configured in Config.xml. Am I right? I didnt find any way of adding new ports to Config.xml apart from standard port on web.
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
     <display-name>MyProject</display-name>
     <servlet>
          <servlet-name>messagerouter</servlet-name>
          <display-name><![CDATA[Apache-SOAP Message Router]]></display-name>
          <servlet-class>org.apache.soap.server.http.MessageRouterServlet</servlet-class>
          <init-param>
               <param-name>faultListener</param-name>
               <param-value>org.apache.soap.server.DOMFaultListener</param-value>
          </init-param>
     </servlet>
     <servlet>
          <servlet-name>rpcrouter</servlet-name>
          <display-name><![CDATA[Apache-SOAP RPC Router]]></display-name>
          <servlet-class>com.s1.adapter.fundtech.MyServlet</servlet-class>
          <init-param>
               <param-name>faultListener</param-name>
               <param-value>org.apache.soap.server.DOMFaultListener</param-value>
          </init-param>
     </servlet>
     <servlet-mapping>
          <servlet-name>rpcrouter</servlet-name>
          <url-pattern>/servlet/rpcrouter</url-pattern>
     </servlet-mapping>
     <servlet-mapping>
          <servlet-name>messagerouter</servlet-name>
          <url-pattern>/servlet/messagerouter</url-pattern>
     </servlet-mapping>
</web-app>

How to configure a shell and tube heat exchanger with Lab VIew to get data

HiI
In our undergraduate chemical engineering labboratory we want to configure our shell and tube heat exchanger with a DAq and Lab VIEW to get information about the temperaure (of the cold fluid stream being heated), the pressure (of the steam on the shell side of the heat exchanger) and the flowrate (of the water being heated).
Can anyone suggest thermocouples, pressure transducers and flowmeters to fit between the heat exchanger and the DAq?
P.S. the heat exchanger is already fitted with thermometers, a pressure gauge and a rotameter but we don't know how to connect these hardware to the DAq
Solved!
Go to Solution.

It sounds like you have enough information to pick out appropriate sensors, you just need to do the research. I would start looking through the Omega catalog, or give them a call - they're usually helpful. I can't take the time to spec out parts for you - that would be a lot of time spent on someone else's project. Most pressure sensors put out either a 4-20mA or 0-5V signal, either of which you can read through an analog input on a DAQ; measuring a 4-20mA signal requires a resistor to convert to voltage. Most of the NI DAQ boards can read a thermocouple on an analog input, but make sure that your hardware does support reading thermocouples. For accurate readings, use a device that has built-in cold junction compensation - for example, the SCB-68 connector block - and for the most accurate readings, get a board specifically designed for temperature measurement.
For the flow measurement, a standard, simple solution is an orifice plate. You put a differential pressure transducer across it, look up the appropriate equations, and use them to calculate the flow rate given the density of the fluid (which you'll be able to calculate from the pressure and temperature, since steam tables are widely available). There are other differential pressure devices available as well - at a previous job we used a V-Cone from McCrometer. If you call them they'll spec one for you - but get an approximate cost first to make sure it's within your budget.

How to configure network virtualization in SCVMM 2012 R2 with two host

hi everyone... can you teach me how i configure networking in my infrastructure..
i am getting confuse that i have 2 phisical server, i don't know to set the netwokring in scvmm. Every best practice, i found in internet is using more than 2 physical server.
i have been tried before with the networking which i want..but it failed...
any one help me please...

This whitepaper should explain the required steps to get this working.
http://gallery.technet.microsoft.com/Hybrid-Cloud-with-NVGRE-aa6e1e9a
The whitepaper will use more than two hyper-v hosts, but you'll get the picture.
You can have 1 host to run your NVGRE VMs, while the other host should be dedicated to run the virtualization gateway VMs.
-kn
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

How to configure apache and weblogic in windows 2000

i am novice,
i want to configure apache and weblogic in windows 2000
weblogic version is 6.1
apache version is 2.0
how to do?

George,
I would take the following 'first steps'
1)Install Apache20 on your Windows machine following the Apache online documentation
http://httpd.apache.org/docs-2.0/misc/tutorials.html
2)Make sure you can 'serve up' static HTML content from your Apache Server
3)Install Weblogic Server per our online documentation
http://edocs.bea.com/wls/docs61/install/index.html
4)Also, make sure you can 'serve up' both static and dynamic (e.g., JSP) content
directly from WLS server
5)Once you have both of the above 'sanity' checks attempt to configure a simple
proxy by ppath or mime type via our online documentation
http://edocs.bea.com/wls/docs61/adminguide/apache.html#103803
Chuck Nelson
DRE
BEA Technical Support

How to Configure a Servlet Chain Using MIME Types with weblogic5.1?

Hi ,
          I want to configure a servlet(cocoon) in weblogic 5.1 such that the
          servlet so configured is invoked each
          time a response with the mime-type "text/xml" is generated.
          1.) will weblogic support to configure a servlet with a particular
          mime-type so that it post-process any
          servlet's response with the corresponding mime-type?
          2.) if not what is the alternative?
          Thanks
          sumanth
          [sumo.vcf]


We suggest that use the request dispatcher interface instead. Servlet
          chaining is not a standard's based possibility.
          Michael Girdley
          WLS Product Manager
          Sumanth Chinthagunta <[email protected]> wrote in message
          news:[email protected]..
          > Hi ,
          > I want to configure a servlet(cocoon) in weblogic 5.1 such that the
          > servlet so configured is invoked each
          > time a response with the mime-type "text/xml" is generated.
          > 1.) will weblogic support to configure a servlet with a particular
          > mime-type so that it post-process any
          > servlet's response with the corresponding mime-type?
          > 2.) if not what is the alternative?
          >
          > Thanks
          > sumanth
          >

How to configure my oracle jdeveloper 11g preview 4 with oracle 8i database

hi every one
my requrirement is to configure my oracle jdeveloper 11g preview 4 with oracle 8i database with (thin driver)
thanks in advance

Prapan,
JDev 11g TP4 comes with 11g JDBC drivers, which do not support connecting to any database v 9.0.1 or earlier.
So, back to you... depends upon what you want to do. If you want to write your own code to connect to a database using 11g, get ahold of some JDBC drivers that support 8i and have away. If you're talking about getting the database development stuff (e.g. the embedded SQLDeveloper) to work, you're probably out of luck.
So, please define "configure my oracle jdeveloper 11g preview 4 with oracle 8i database"
John

There was away (before Mavericks) I could single click on an email and it would highlite but not open. I could either delete or second click and the email would then open. Can anyone tell me how to configure the prevue pane to that end with Mavericks?

There was a way (before Mavericks) I could single click on an email in the "prevue pane" and it would highlite but not open. I could then either delete it or click again and it would open. With Mavericks that doesn't seem to be available making it impossible to delete an email in the prevue pane before I open it. Its frustrating to have to go through all the monkey motions when I know I want to delete it from the get-go. Does anyone know who to configure for that operation? I'm using an iMac.

Wow, have you ever seen 1 Billion in hard cash? If not, I assure you it exists as well.
Try not to pick apart what others write because you "have not seen it."
I run TWO programs for protection of my MAC now and have been for sometime b/c developers of them become complacid thinking MAC is impermeable.
My MAC locked me out of it and two externals and when I finally did get back into them Norton Anti-Virus found a "worm." When I asked the program to find the origin, it was traced back to an email, as you said, that I opened unintentionally. I still have two external HDs for backup and a cloud backup now.
When ClamX ran after Norton was finished, ClamX found what it called as "spyware," and it's origin was in my email also. I tried to delete the emails after the programs (both) identified the infected files, however once deleted and the computer is restarted, they were still there because I ran the scans again.
Now since we are no longer talking about how to turn on and off the view pane in apple mail; riddle me this, why can't the developers of these antivirus and antispyware/malware programs get together and develop ONE PRODUCT that catches 90-95% of the viruses/worms/spyware/malware ect that get onto MAC's? Is it because they are too busy thinking they don't exist?
I still run both programs and feel protected between the two. If Norton said it was a "worm" then I believe it was a worm and if ClamX called it "spyware" then I believe it is spyware.
I had to wipe my MAC and do a fresh install to get it working again, then I had to open one of those externals (which was very, very difficult) multiple times until finally it displayed the message "you can view, but not change the data." I exported as much as I could to my cloud and I had to format both of those too.
I still run both programs as I feel protected between the two. If Norton tells me it is a "worm" then I believe it is a "worm;" if ClamX tells me it is "spyware" then I believe it is "spyware." If it happens again, which my hope is that it won't, I will be more than happy to send the infected files to you!!
Try not to "forum rage." Support forums to post experiences and find answers, not nit-pick or claim not existance b/c you have not experienced it for yourself.

How to configure MQ-FTE and IBM Datapower along with PI7.1

Hi Friends,
Can somebody guide me with the steps to configure MQ-FTE and IBM Datapower with PI7.1 for B2B communication?
Thanks,
--Sonal

1. What is the difference between JMS MQ and Native MQ? How to determine which one to use?Native MQ refers to a proprietary api provided by IBM in multiple languages including java so that applications running on these can communicate mq. IBM also provides JMS wrappers around this native api, so that a jms client can talk to mq using JMS API. This is called MQ JMS.
2. If native MQ can be used here, what are the steps to configure Native MQ on WLS in my situation?SOA suite provides a MQ Resource Adaptor which can be used to connect to MQ. The developers of this resource adapter would have used the native api to enable the adaptor to talk to MQ, so that you dont have to worry about it. However you will need to configure the properties of your local MQ ( qmgr , q name etc). This is done in the outbound connection pool properties of the resource adaptor.
please check this blog for how to do this : http://soa-bpel-esb.blogspot.com/2009/09/configuring-mq-in-11g-soa-suite.html.
Since your MQ installation is in a remote machine you will have to configure the following properties specific to your environment - hostname, port, server connection channel, along with the queue manager name and queue name
3. Do I need any foreign servers or message bridges to be configured?Not required for your case if you are using MQ Adaptor. Since MQ also provides a JMS transport , you would have required foreign servers if you have to use JMS Adaptor instead of MQ Adaptor. Native MQ is expected to be faster than MQ JMS as it doesn't have the extra JMS layer.

How to configure OBIA 11.1.1.8.1 with ODI

Hi forum,
I want to configure Oracle Business Intelligence Apps 11.1.1.8.1 installed on Linux with ODI ver 11.1.1.7.
Can anybody please provide:
1) A tutorial about how to setup ODI for OBIA 11.1.1.8.1?
2) Than how to perform functional configuration using Oracle Data Integrator, Oracle BI Applications Configuration Manager and Functional Setup Manager?
3) How to Create, Run and Customize ETL in Oracle Data Integrator?
Thanks

a) Do what most people do and read the documentation (Oracle Business Intelligence Applications 11g Release 1 (11.1.1.8.1) Documentation Library) that comes with the product, installation details will be documented. No one is going to go through all the installation steps for you in these forums. The links I provided before are good starting points. If you are still struggling get hire a consultant to help you out.
b) The ODI studio is just a client so you can install it on whatever OS you like. The repositories are simply databases and can be installed on a database whether it is hosted on Windows or Linux etc and the agent is Java so again is platform independent. You can configure the setup distribution however you want as long as the repositories can be connected to via JDBC from the studio client.

How to configure maven to build EJB Jar?

Hi!
I would like to know how you setup Maven2 or alternatively Ant to build an EJB Jar.
I have managed to do this in Maven by adding required jars to my local repository and added dependencies in the pom.xml file. This, however, do not seem like a good solution. I would like set some kind of classpath for maven to look for all libraries included in my application server.
Could you please help me to solve this and I will be most grateful?!
/Leo

Hi,
this is not an Eclipse forum but JDeveloper and ADF. Please try StackOverflow
http://stackoverflow.com/questions/tagged/eclipse
(Before I would search on StackOverflow if this question has been ansered before)
Frank

How to configure SSL in Weblogic 9.0 and later versions.

Hello all,
I am Nikhil.
I am trying to configiure SSL on BEA application server by using the below link. But am unable to understand the process.
http://e-docs.bea.com/wls/docs90/secmanage/ssl.html.
Can any one provide me Step by Step process to Configure SSL.
Thanks,
Nikhil.

Well , Are you trying to configure SSL using demo certs? If yes , Just go to server general tab and enable SSL Poret ( By default its 7002 , You can specify any other port too if it is been not used by any other process)
If not Demo , and you are using your own custom trust and identity certs , then you need to do this:
-Login to weblogic console
-Select the Server -> keystores-> customIndentity and Custom trust
- Input the details of your Keysotres in the configuration part
-CLick on save
-CLick on SSL tab , do the configuration of your private key alias and passowrd.
-Click Save
DOnt forget to check the SSL Port.
HTH
Sumit Kumar

How to configure Mountain Lion Server to run Web2py with wsgi?

I am trying to config Mountain Lion Server to run Web2py with mod_wsgi. I get an error saying: "Premature end o scritp Header" wsgihandler.py (which is the wsgi file for Web2py).
I had it working fine in Snow Leopard and Lion Servers but not in Mountain Lion Server.
Thanks for your help.
Flavio.

I don't run web2py framework so can't tell you specifically.
That error means your script is not writing an http header to the browser so the browser can't decode whatever string it is getting. Your script is running as a plain old Python script. This is most likely because the Server.app in 10.8 now includes mod_wsgi built-in and configured from the GUI.
You can insert an intercept anywhere in your code to check any variable by saying this:
########## PROGRAMMING HERE ###############
print("Content-type:text/plain\n\n")
print(someVariable)
# raise SystemExit
The above sends an "http header" so the browser knows what to do. These headers are invisible in the browser window. But depending on your Python version, the pring statement may not work (I am running Python3). The SystemExit statement is optional, just in case your script crashes downstream.
WSGI sends a header like this:
startResponse("200 OK", [("Content-Type", "text/plain")])
but it sounds like mod_wsgi is not even being invoked. Normally your WSGI script is named *.wsgi and your Apache is set up to run the Python script as CGI under the mod_wsgi handler using this directive:
AddHandler wsgi-script .wsgi
The file having the config is located at
/Library/Server/Web/Config/apache2/httpd_wsgi.webapp.conf
where webapp is the name of your webapp. I would suggest copying the file called httpd_wsgi.conf and renaming it to your webapp name. When Server.app is configured properly, you enable wsgi webapps in the GUI Advanced wndow for your domain.

How to configure JDBC connection in oracle BI publisher with teradata datab

Hi,
I am going to use Oracle BI publisher to create report.
Our database is Teradata.
How to create database connection for Teradata in BI publisher.
How to create JDBC connection.
What should be the Database Driver Class?
What should be the connection string format?
Please provide me the suggetion.
Thanks,
Santanu Manna

Hi;
I suggest please refer below which could be helpful on your issue:
How To Generate XML Output (Excel, HTML, PDF) for FSG Reports [ID 804913.1]
E-XMLP: BI Publisher Report RTF Template to Excel output is not same as PDF,RTF or HTML format.[Article ID 1515711.1]
BI Publisher Enterprise Excel Output File Size is Too Large [ID 1271544.1]
Regard
Helios

How To Configure Maven With Weblogic 10.3.1 With JDK6

Similar Messages

Maybe you are looking for