Lumia 620 strucked in spinning cogs

 620 strucked in spinning cogs after hard reset.tried tips mentioned in support page.please some one help

As per nokia care!
Normally, it takes only 30 minutes at most to reset it. In the event that it would take longer, like what happened here, you can press and hold both on the volume down button and power key for about 10 seconds.
The phone should then reboot. If the phone would still be stuck to spinning gears, here is a hardware reset that you need to press.
Input these keys on the following sequence, press them one key at a time:
Volume up
Volume down
Power key
Volume down
Make sure that you try this while the phone is charged.
If  i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

  • Lumia 620 hard reset, gears keep spinning

    Bought a Lumia 620, did a hard reset in the settings.
    Two gears have been spinning on screen for hours, left overnight. Tried pulling battery but just returns to gears. Tried hard reset using keys on side, same issue.
    Can anybody help?

    You may wait till the Battery is fully drained. Then connect the charger and leave it on charge for upto 40-45 minutes. See if the phone switches ON on its own or atleast shows the Battery charging icon in the display.. If it is showing it, try a Soft Reset : Press Power + Volume(down) keys until the phone vibrates (about 8-10 seconds). 

  • Nokia Lumia 620 upgrade Denim

    Upgrade Denim

    Got a critical software update message yesterday to upgrade to Denim (8.10.14219.341)
    Unfortunately I agreed and it messed up my Lumia 620 - spinning cogs on power up & no way to get the phone even back to factory settings using keypresses on device.   I needed to install the Lumia software recovery tool to get an install back on the 620 - not a quick process and poor on screen instructions.
    Lumia software recovery tool installed the following (not Denim software):
    Firmware: 3058.50000.1425.0006
    Software: 8.10.12393.890
    Within minutes of getting the phone functional again (obviously all data lost from it) I got a a critical software update message again to upgrade to Denim. I thought that the initial problem was maybe the software trying to install on the wrong firmware (the firmware installed by the recovery tool seems to be the right version), so I tried to upgrade to Denim again - doh!  Back to the spinning cogs!
    Back to the Lumia software recovery tool.
    I'm with Talktalk (Vodafone network), but (according to a support page) the recovery tool seems to have installed the Firmware for O2.  Hopefully it will work OK for a while - I can't go through this process a 3rd time.
    I guess I now have to ignore the critical software update messages.  I would advise you to do the same - unless someone from Mircosoft can provide a reliable update for the 620.

  • Reset my Lumia 620 through settings and now it's '...

    I planned to give my Lumia 620 to my dad as I had recently upgraded to a 920. Thus I did a reset to make it feel as brand new as possible. Now, it's stuck at the 'cog cycle' for at least a day. What will the care centre do with it?

    Is it connected to a charger that even after a day the battery is not drained completely ? If so remove the charger and wait till the phone goes dead. Now connect the charger and let it charge... If the phone doesn't switch ON on its own even after an hour or so..Press Power + Volume(down) keys until the phone vibrates (about 8-10 seconds). See if it switches ON .. 
    If still no luck, need to visit Nokia Care ..

  • Lumia 620 resetting problem

    i reset my lumia 620 but its two days now the two stearing wheels continue on running and i cant use my phone as of now. please i need your help. i dont know what should i do.

    Hi, andrea143. Is the screen of your device still displaying the spinning gears? If yes, please refer to the below link for the fixes you can try to resolve this:
    http://www.nokia.com/us-en/support/faq/?action=singleTopic&topic=FA141347
    You may consider performing the steps 2-3 times if the first attempt doesn't seem to help. Please let us know if this resolved the issue or not.

  • Software Recovery Tool Odd Result with Lumia 620

    Good Afternoon,
    One of our users bought his Lumia 620 to me earlier, it had hung apparently. He removed/re-inserted the battery and since then the screen just shows Nokia on powerup and nothing else happens.
    I tried all the usual soft reset/hard reset/spinning in my chair whilst praying to the great Finnish gods of telecommunication etc. All to no avail.
    I then downloaded the Software recovery tool (V1.4.3) and installed it, this again would not see the phone. I followed the instructions and then it picked it up.
    According to the recovery tool, it found the right hardware revision for the phone and suggested the correct country version of firmware (3056.4000.1404.0004). Happy days.
    I told it to go and do it's thing, upon which it downloaded the 1.37GB of firmware and flashed it to the phone.
    At this point the recovery tool, was waiting for the phone to reset asking for a pin for 180 seconds. At this point it timed out. The phone itself just sat there looking at me blankly and then reset itself.
    The phone itself re-booted and now has a screen with 3 red wavy lines and the word TIM on it. (see attached pic)
    So my questions are......
    1. Have I done something worng?
    2. If I haven't, then does anyone have an idea what has happened?
    Thanks In Advance
    Attachments:
    WP_20140718_002.jpg ‏1623 KB

    Hi All,
    Thanks to Abi99 and scoobyman for the replies and pointing me in the right direction.
    It seems that the failing phone is indeed an Italian phone that I have been sold as a UK variant (thanks Amazon)
    The product code for the UK one's I have is 059R4G7. The faulty phone begins 059S... (i'm at a different office today so don't have the full code) . Interestingly the firmware for the Lumia 620 TIM Italian version is the same number as the UK country variant hence my confusion.
    So the software recovery tool is actually updating correctly with the TIM softwaredependant on the model number. So it's just that the phone is actually broken (written off to experience). I'll be more careful checking the ones I receive in the future.
    As an aside I, it would be nice if the software recovery tool could allow you to choose which firmware to load. However I realise this opens a massive can of worms and is unlikely.
    Thanks All.
    Andy.

  • Constant problem with store in my Lumia 620

    Hi
    When I open store in my Lumia 620 it shows error c00cee22.
    Solved!
    Go to Solution.

    Hello, Vaibhav_16390. Have you already tried the suggestion given by eshiejamz? BTW, are you also using a Lumia 620? You may also try deleting the browser's history. Go to Settings > applications tab > Internet Explorer > delete history. Once done, press and hold both the volume down and the power keys for 10-15 seconds. 
    Let us know the outcome. 

  • Gray screen, spinning cog and midway to first back up of time machine

    Hi,
    I got a new external hard drive and wanted to back up my system, which I tried using time machine. At some point during the back up, it appeared to me that time machine is stuck. I tried stopping the back up but my machine was not responding, even any other application. I power it down by down the power key. So, I had backed up some data and not all of it.
    Now, when I restarted it is showing gray screen with apple logo and spinning cog and not moving beyond that (even after 4 hours). I am kind of worried if my hard disk has crashed and I have lost the remaining data.
    Any help regarding trouble shooting this will be highly appreciated.
    Thanks,
    v8r.

    Basically, you need to boot from a drive other than the one that is failing. If your external already has an operating system on it, you can boot from that one. Since you're asking, though, I'm going to assume it does not.
    First things first: cables. You need a firewire cable to connect your MacBook Pro to your Mac mini. I don't know what FireWire ports are available on your two machines. The two types of FireWire (400/800) are compatible, so if the two machines don't have the same ports, you can get an adapter. See this page for info about types of FireWire ports: http://docs.info.apple.com/article.html?path=Mac/10.6/en/8259.html
    - Next, boot the machine with the failing drive into "Target Disk Mode." When you hear the chime, hold down the "T" key. You should not see the Apple logo. Instead, you should see the FireWire logo slowly moving around the screen. This tells the computer to act as if it were simply an external hard drive.
    - Connect the MacBook Pro to your Mac mini via FireWire. If you're lucky, the drive will show up on the desktop of your Mac mini. Copy the files to a safe location.
    - If it does not, you'll need to use software to recover the data. If you already have DiskWarrior, you can run DiskWarrior from your Mac mini on the MBP's drive. If you don't or if DW failed to produce a read-only "preview," I would recommend ProSoft's Data Rescue: http://www.prosofteng.com/products/data_rescue.php DiskWarrior has more long-term use, but Data Rescue is better for this situation.
    I know I still skimmed over a few things (e.g. using third-party software that I no longer have), but I hope that gets you started.

  • IMac G5 tries to start and dies after spinning cog for a minute

    iMac G5 tries to start and dies after spinning cog for a minute
    I did this;
    1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5. Select your Mac OS X volume.
    6. Click Repair. Disk Utility checks and repairs the disk.
    the result was.
    the 'permissions' are sometimes wrong, but they repair
    the hard drive is either repaired or OK
    the iMac will then restart and work fine and sometimes shut down and restart OK
    after replacing the Hard Drive I actually thought I had fixed it and went to bed late but happy,
    on waking in the morning, however I was not so happy it fired up and then died after dong -> apple logo -> spinning cog -> dead!!
    I would be grateful for any help
    Thanks
    Pete

    Hi Miriam,
    Thanks yes,
    here we go -- after running disc utilities it tells me directory OK and disk OK (or something like that) When I replaced the Hard Drive, I started 'fresh' erased/formatted the hard drive (new Seagate Barracuda 7200 500GB) and it has just got 'tiger' on it (and upgraded to whatever it is now I think I remember 4.11, I can't tell at the moment as I have got the back off) I didn't transfer any data I just took the old drive (Seagate 160GB) out and stuck the new one in.
    I've just changed the battery (I didn't really think it would work, but I was still hopeful and I'd bought the battery anyway) I did the LED thing, the internal power button thing, and the resetting the SMU thing (with crossed fingers and bated breath) but -- so I'm thinking is it the power supply? I read some of Jim's weighty, but worthy tome and resolved to remove the power supply and have a look. On opening it up, it does look as though, one (at least) of the capacitors has 'blown' (by the way, just in case I sound like I know what I'm talking about, I don't of course, I'm just quoting Jim's words;-) I'd love to send you a picture of the inside of the power supply showing what I believe to be a 'blown' capacitator (and I'm going to try to send one to Jim as I think it might be useful to him and others. can I attach a photo in any way or would you like to send me your email address <Edited by Moderator>
    Thanks
    Pete
    PS it's still 'weird' to me, why it starts and runs well, when started from tiger (or whatever) and then starts or restarts from the Hard Drive unless I leave it a few hours and come back and try to start it
    again? wow it's late nearly 4.00am here in london UK.

  • My lumia 620 is not responding some time at the ti...

    I have submitted my phon at nokia care for this issue that some time my lumia 620 is not responding at the time of call reciveing.They gave me after software upgradation.But is not solved then I contacted with customer care.They tolled me to submit the phon again.I have also submitted .Today from cre they called me and tolled that my phon is under observation.If they find the problem then they will send it to higher authority.But my problem not happen frequently.It happen mostly at the first call.The slide function does not work.Some time the answer button remains gray colour and does not function.Now I am sure that tommorow they will give me the phon saying there is no problem.Now friend please tell me how can i show my problem.its 2 nd time to submit .its a big fault to buy lumia620

    hi mate, this is a user to user forum only for Nokia products and services. as such, Nokia care points are independently run franchises, and in this case you will need to persist with Nokia Care until the issue is resolved to your satisfaction.

  • Problem in nokia lumia 620

    Facing while downloading in store in my nokia lumia 620. Getting error code c00cee22.

    Hi rishi2014,
    Welcome to Nokia Support Discussions!
    What connection are you using when downloading from the store? Have you tried toggling between your mobile data connection and Wi-Fi connection.

  • Problem in updating my Lumia 620 to black

    Hi,
    Black update is available in my country for Lumia 620. But my phone is not getting black update. Whenever I check for update it says your phone is up to date.

    @rdg4444  your phone is a Malaysia variant and after checking Availability in Asia Pacific, I can see that the 620 black update is not in distribution yet for Malaysia variant. The "Coming Soon" in availability page means that it's approved and will be in distribution in a few days.

  • Very quiet sound in my Lumia 620

    Hello,
    I have a problem with a speaker to talk in my Lumia 620. I have installed Windows Phone 8.1. When I bought this phone sound from this speaker was loud but now after few mounths it is very quiet. My volume is set for max. What to do with it?
    Please help.

    With WP8.1 there are separate volume controls for different functions .. Hope you are setting them correctly ..
    See THIS

  • Problem with the Update Nokia Lumia 620

    The update was initialized on my Nokia Lumia 620 that I bought yesterday. When it started the phone was connected to WiFi. However, after 10 minutes I thought it stuck so I put the battery out and in again. But the update started again. The WiFi was still on. I waited an hour but nothing happened so again I put the battery out and in. Later the WiFi connection was shut down and the update still going. Later I tried to put the battery out and in all over again. I left the phone for the night, it lost all the battery so I plugged the charger in it and then the update started again! I have the 3G internet purchased, so when it's not on WiFi then it should be working. So my question is if the update is really going on (since 4am, that is almost 4 hours till now) or is something wrong. How long can it take on 3G in the situation I described? Will it ever end or should I go and return it to the service for them to fix it? Please help me! It's really urgent!

    Update is possible thru' WiFi only.. It may take in excess of an hour for the whole update process to complete ..so once you start it (thru' WiFi) just leave it .. Don't go on removing the battery all the time ...Keep the phone on charging when you update. Additionally you may have settings-->WiFi--advanced ..and select 'Keep WiFi on when screen times out..' .
    If you still get the problem visit Nokia Care to get it updated. 

  • What is new for the Lumia 620 in the black update

    What is new for the Lumia 620 in the black update ?

    It seems Lumia 620 doesn't benefit the "double tap to wake", other than that all announced apps and features will be available. I advise to check also some great beta apps from Nokia Beta Labs, kudos to the guys developing these.

Maybe you are looking for