How to configure objective function for use in minimizati​on?

Hi all,
I have been working on a minimization problem (for details, see this post).  I have figured out how to run an unconstrained minimization, but can't quite figure out why my objective function wire remains broken.  Here is a screen shot:
Any ideas?
I include below this example main VI, a subroutine that does the minimization, and a subroutine that gets called during the minimization.  As it seems I am limited to 3 attachments, I will add some sample data to the first reply that I will generate.
Many thanks,
RipRock
Solved!
Go to Solution.
Attachments:
ExampleCode2.vi ‏15 KB
Function2Min.vi ‏11 KB
DashPotCorr1a.vi ‏72 KB

Basically all I did wrong was I created my own function to minimize from scratch.  The help very clearly says to copy the template and use that.  Here is the function copied into the LV provided template.  
All the best,
RipRock
Attachments:
Function2Min.vit ‏36 KB

Similar Messages

  • How to configure Broadcast messaging for IC Webclient profile

    Dear all,
    How to configure Broadcast messaging for IC Webclient profile. what are the prerequisites for it?
    We are not using EP interface for IC Webclient, then where can I find broadcast messaging URL in SAP CRM system.
    I have checked for the relevant BSP application, but could not find.
    Please help me to configure the scenario successfully, your help will be highly appreciated.
    Best regards,
    Raghu ram

    Hi raghu
    In CRM Broad cast messaging application is CRM _BM,
    Go to easy access u2013 go to favourites u2013 select add other objects - select BSP Applications- then select CRM_BM Application.
    Select that BSP application and test it u2026
    `
    Regards,
    Narsimha

  • How to configure release procedure for rate contracts release

    Dear all,
    How to configure release procedure for rate  contract following are the requirements
    they are two release codes c1 & c2 <=100000,>=100000
                    if  c1 is not there c2 has to be approved
         Change in the value of the rate contract contract
         Change in the validity of the rate contract
         Addition of deletion of line items
    While using a non u2013 released rate contract in the PO an error message should shoot out.
    Also the logic should be changed while using the rate contract in the PO.
    The usage of the rate contract should be till the validity of the rate contract. i.e. the measurement should be end date of the rate contract and the PO creation date and not the delivery date of the PO. &
    It should be possible to refer existing valid rate contracts in purchase orders.
    Regards,
    bhaskar

    Hi,
    In SAP rate contract is known as value contract denoted with wk. The release procedure for rate contract is same as that of other contracts and scheduling agreements. The tables  for contracts will vary with SA (Scheduling agreement) .You may try and maintain condition records based on the customer combination and maintian the validity date of condition records as per your requirement.For contract and PO will have the same header/item table as EKKO/EKPO, and the release
    class in standard is the same FRG_EKKO, you can use the same for contract.
    To distinguish if it's a contract or PO, EKKO-BSART can be used.
    For contract EKKO-BSART will be MK or WK, while PO will have NB/UB etc..
    You can restrict the document type to set up the release strategy for only contract.
    Of cause, you can also create your own release class Z* for contract copying standard
    one FRG_EKKO via CL01/Class type 032, and then assign the class Z* to customizing:
    OLME:
    -> contract
    ->Release Procedure for Contracts
    ->Define Release Procedure for Contracts
    ->Release Groups
    If you have already created the PO release class.
    Assign a new chracteristic of Document Category -BSTYP
    Please check below link for detailed release procedure. I hope this wil help you out .Thanking you.
    http://wiki.sdn.sap.com/wiki/display/ERPSCM/RELEASE+PROCEDURE#RELEASEPROCEDURE-TABLESUSEDFORRELEASEPROCEDURES

  • How to debug a function module using in the generic datasource?

    Hi all,
    We have created a generic data source using function modulle and have been extracting the data for a single customer it contains single records but it has pulled out more than 10,000 records. how to debug the function module used in the data source.
    since we schedule for extraction in bi and back ground job gets triggered in ecc for extraction,
    i know in se37 we can select the function module name and then debug but still need to check while the bacground job is trigered through bi.
    Thanks

    Yes you can debug the Function Module.
    Open the function module in SE37 and put a break point in the code where you want to check from, then come to RSA3 and give the datasource name and check the Debug check box on this screen, once you click on the start button it will take you the place where you have placed the break point in the FM, by pressing F5 you can see the flow of the FM.
    Let me know whether this solves your issue.

  • SAP IDM 7.2: How to setup SSO functionality for WebUI of CRM and GRC?

    Hello IDM-experts,
    where can my customer find information about
    SAP IDM 7.2: How to setup SSO functionality for WebUI of CRM and GRC?
    Customer situation description:
    The situation is that we are using SAP IDM 7.2. We are using a functionality to allow our users to access a webpage from where they can gain
    SSO access to the Abap systems via the SAPGui. See screenshot as an example.
    Now what we want is to access the CRM and GRC WebUI also with the same SSO possibility. We cannot find any guide/best practice on how to do
    this or if it is possible via SAP IDM 7.2.
    You can see a weblink in the first screenshot but it does not work. It will ask you for a username and password, see second screenshot.
    Kind regards,
    Daniela

    Do you know how the SAP GUI SSO is setup ? Is it using SNC/Kerberos ?
    If it is (I suspect it is), then you will need to use similar method of authentication for the ICF Services. These cannot use SNC since they are accessed via browser, but what you want is possible.
    Thanks
    Tim

  • How to configure Email notification for User login's in Exchange Infrastructure?

    How to configure Email notification for User login's in Client Machines?

    Hi ,
    Based on the description , you need to assign logon scripts to the end users via group policy and also use your exchange server as the smtp server in that logon script to relay emails to the internal recipients.
    Thanks & Regards S.Nithyanandham

  • I have an external hard drive that was formatted by a PC and has files and directories etc. I want to format it and use it on my IMAC for backup but I can't seem to write to it nor can I delete current content. How do I initialize it for use with the MAC?

    I have an external hard drive that was formatted by a PC and has files and directories copied to it etc. I want to use it on my IMAC for backup. I see it on my my IMAC . I can open files etc.  But I can't seem to write to it nor can I delete current content. I don't care if I lose current content. How do I initialize it for use with the MAC?

    You can't write to it because it's formatted as NTFS which OS X will read but not write to. If you want to continue using the drive with both a PC and OS X you will need to download and install NTFS-3G so you can then write to it from your Mac. You can get NTFS-3G at:
    http://www.macupdate.com/app/mac/24481/ntfs-3g
    If you want to use the drive exclusively with your Mac then move the data off it and reformat it in Disk Utility (Applications - Utilities - Disk Utilities) as Mac OS Extended (Journaled.)

  • I have a company Ipad that belonged to a deceased employee. no access to his icloud or appleID. how can I restore it for use with a new apple ID

    I have a company Ipad that belonged to a deceased employee. no access to his icloud or appleID. how can I restore it for use with a new apple ID?
    The apple ID was his personal account and can no longer gain access. Im sure I can get purchase recipts from the accounting department if needed. I tried to put the Ipad in restore mode and used itunes to "recover" the ipad but it still wont let me in because he registered the device with the "lost iphone" feature or whatever that is.

    Activation Lock in iOS 7  >  http://support.apple.com/kb/HT5818
    The Apple ID and Password that was Originally used to Activate the iDevice is required
    If you do not have that information you will not be able to use the Device.

  • Configuring Cisco Router for use with Syslog Server

    Configuring Cisco Router for use with Syslog Server:
    Does anyone know of a good doc for this?
    -Ashley

    Start with that one: http://security-planet.de/wp-content/uploads/2008/12/logging-ios.pdf
    And if you need more informations, just ask what you want to achieve.
    Don't stop after you've improved your network! Improve the world by lending money to the working poor:
    http://www.kiva.org/invitedby/karsteni

  • How to import WMV file for use in adobe programs, especially After Effects and/or Premier?

    How to import WMV file for use in adobe programs, especially After Effects and/or Premier?

    I have the latest adobe creative cloud and i'm using Mac 10.8.2
    My client gave me a wmv file that she wants some people blurred out in the background but when I go to import the media, it's greyed out. I'm assuming that After Effects will be the best solution for this, but maybe there is another way.
    I can purchase a video converter and convert it to .mov but that costs extra money that I don't want to spend just to do this one project.

  • How to create menu function for link to open file

    Hi,
    I need help how to create menu function for link to access file and allow user to save the file when click on it.
    The file will keep inside server.
    Thank you.
    Regards,
    Wilson

    I need help how to create menu function for link to access file and allow user to save the file when click on it.
    The file will keep inside server.AFAIK, you have to write a custom code to achieve this and Oracle does not provide this functionality.
    If you want to store the file as an attachment, please see (How to Store Image/PDF Attachments on the File System in 11i and R12 (like Attachment File Directory) [ID 294525.1]).
    Thanks,
    Hussein

  • How to find Object name for a object?

    Hi Experts,
    How to find Object name for a particular Object? Is there a Tcode for it?
    __Like Object name for__
    Material number -  materialnr
    Goods receipts / return - matbeleg
    Accounting documents -  rf_beleg
    How to find Object name for other Objects? Is there a particular way?
    Thanks & Regards
    Chandan

    Hi,
    You can find objects in SNRO transaction.
    In SNRO search by giving long text...
    for eg., Service .. for service entry sheet. keep the first letter in capital letter only.
    Thanks & Regards,
    Anand.

  • [svn] 2569: Adding [HostComponent] metadata functionality for use with Gumbonent skins to provide a

    Revision: 2569
    Author: [email protected]
    Date: 2008-07-22 13:55:02 -0700 (Tue, 22 Jul 2008)
    Log Message:
    Adding [HostComponent] metadata functionality for use with Gumbonent skins to provide a
    strongly typed reference (hostComponent) back to the owning component, automagically.
    Reviewer: Paul (Compiler), Ryan (SDK)
    QA: Yes
    Modified Paths:
    flex/sdk/trunk/development/eclipse/flex/flex4/.actionScriptProperties
    flex/sdk/trunk/frameworks/projects/flex4/build.xml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/core/SkinnableComponent.as
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/ApplicationSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/ButtonSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/CheckBoxSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/HScrollBarSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/HScrollBarThumbSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/HScrollBarTrackSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/HSliderSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/HSliderThumbSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/HSliderTrackSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/ItemsComponentSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/ListSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/PanelSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/RadioButtonSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/ScrollBarDownButtonSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/ScrollBarLeftButtonSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/ScrollBarRightButtonSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/ScrollBarUpButtonSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/SelectorSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/SpinnerDecrButtonSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/SpinnerIncrButtonSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/SpinnerSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/TextAreaSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/TextInputSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/ToggleButtonSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/VScrollBarSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/VScrollBarThumbSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/VScrollBarTrackSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/VSliderSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/VSliderThumbSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/VSliderTrackSkin.mxml
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/CompilationUnit.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/SyntaxTreeEvaluator.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/ImplementationCompiler.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/lang/StandardDefs.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler_en.properties
    Added Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/HostComponentEvaluator.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/HostComponentExtension.java

    Try assigning a rollover to each conatiner mc as it is created...
    scrollerBase["imageHolder" + i].onRollOver = function(){
          trace("SUCCESS");

  • How to configure SMTP server for osb 10.3.1

    Hi All,
    Can anyone share information on how to configure SMTP server for osb 10.3.1
    and then how to send an email from osb 10.3.1
    Thanks in Advance!!

    Thanks a lot!!
    I configured the same way. When I am sending email to an account on the same domain as my SMTP server is the sending of email is successful. But its giving error when I am trying to send an emain to an account which is on different domain. It giving error as "Operation has been cancelled"
    Please suggest something.

  • HT1730 How do I download Rosetta for use in 10.5.8 ppc?

    How do I download Rosetta for use in ppc 10.5.8?

    Not so. Rosetta is a PPC emulator for Intel Macs running Intel versions of OS X up through Snow Leopard. Rosetta is not an Intel software emulator. There is no such animal for PPC machines other than Windows emulators and other non-Apple hardware emulators such as Atari.

Maybe you are looking for