How to configure Personal WS to sort names by last name?

Hello,
I was recently going through my Novell Vibe Admin Guide and came across directions on how to configure the navigation panel in the Personal Workspaces to sort names by last name (by adding wsTree.titleFormat=1to the ssf-ext.properties file). Does anyone know how to do this with the actual Personal Workspace Landing Page itself? We use the Personal Workspace Landing Page as a make shift employee directory. Please see the attached image if I am not being very clear:
I thank you for your help.

Originally Posted by rblehar
Hello,
I was recently going through my Novell Vibe Admin Guide and came across directions on how to configure the navigation panel in the Personal Workspaces to sort names by last name (by adding wsTree.titleFormat=1to the ssf-ext.properties file). Does anyone know how to do this with the actual Personal Workspace Landing Page itself? We use the Personal Workspace Landing Page as a make shift employee directory. Please see the attached image if I am not being very clear:
I thank you for your help.
I haven't tested/checked this, but maybe it's possible by modifying the profile_list.jsp (in /[vibe install path]/apache-tomcat/webapps/ssf/WEB-INF/jsp/definition_elements/)
This thread could be of use: https://vibe.novell.com/ssf/a/c/p_na...beonprem_url/1
Curious to know how you go!
Cheers,
Willem

Similar Messages

How to configure a map of patches names of my midi device in order to insert program changes from Logic?

How to configure a map of patches names of my midi device in order to insert program changes from Logic?

Thomjinx wrote:
You can usually use a patch editor-librarian program like Sound Diver or MidiQuest to copy and paste the patch names (one bank at a time) into the patch name list of a multi-intsrument object in the environment.
That's what I do. Works like a charm.
Cheer,
Thomjinx
"My first copy of Logic came on Floppy disks"
And you will need to setup bank change commands for your particular instrument, if it does in fact have several banks of internal patches. Logic comes with a selection of bank change commands, one of them will almost always work.
My first copy of Logic came on floppies, two of them I think and was MIDI only, moved up to Logic_Audio at version 3.0 I think.

HT204023 how to configure personal hotspot in ipad2

Hi,
Can Anybody help me to configure personal Hotspot in iPAD2?
Thanks

There are right. Apple close with iOS 5 the hotspot personal on iPad 2 for better sell the new one
Also if you take new after there close too about other new iPad there not import maybe we are happy with our product.
I have same problem before. In time my iPad work with iOS 4.3.3 I have personal hotspot but after update to iOS 5 I lose that function.

HT4623 How can configure personal hotspot. Please guide to me.

Dear sir,
I buy iPhone last one week. But I want to know configure personal hotpot.

Dear Sir,
still not working personal hotpot only searching not show on. kindly tell me setting clearly. i want to know carrier. carrier is already auto made.

How to configure trex name server

hi all
while creating index i am getting the error
Index could not be created; creating index failed: TREX Name Server (including back-up servers) is down or not accessable. (Errorcode 7217)
for the above error i need to configure the trex name server using TREX Configuration in the J2EE Engine in j2ee visual administrator .
can any one tell me the clear path that where to configure the above and where j2ee visual administrator installed how to configure the name server
awaiting for replies
regards
ganesh

Hi Ganesh,
In order to access the Visual Administrator, go to Start > Programs > SAP J2EE Engine > Visual Administrator. After you login, you will see 2 nodes i.e. Dispatcher and Server. Expand the Server node. Then go to "Services" and expand it. Then go all the way down to "TREX Service". Then on the right hand side, go to the property "nameserver.address" where you will key in "tcpip://<nameserver>:<port>". Then hit "Update" and click on the "Save" button. Then when you go to TRex Monitor, you should be able to see the Name Server running. Hope this helps.
Thanks,
Sri
P.S Please rewards points if you find this helpful. Thanks.

HOW TO SEND PERSONALIZED EMAILS (WITH SAME MESSAGE) TO ALL ADDRESSES IN THE ADDRESS BOOK - WITH RECIPIENTS SEEING ONLY THEIR NAME BUT NOT WHO ELSE IS GETTING IT

HOW TO SEND PERSONALIZED EMAILS WITH THE SAME MESSAGE, BUT WITH THE INDIVIDUAL RECIPIENT'S NAME... (OR NAME AND THE EMAIL ADDRESS) TO ALL ADDRESSES IN THE ADDRESS BOOK - WITH RECIPIENTS SEEING ONLY THEIR OWN NAME WITHIN THE BODY OF THE MESSAGE TO THEM ?
ALSO, HOW TO ELIMINATE ALL THE OTHER NAMES FROM THE LIST - SO THEY CAN NOT SEE WHO ELSE IS ON THE MAILING LIST, AND WHO ELSE IS GETTING THE SAME MESSAGE?

In the csv file, the column headers must match the the special references in curly brackets.
So you either change the column header in .csv file or the bit in the curly brackets in the Template email.
To change the column header:
In the example shown below, I wanted to use the first two columns
'First Name', 'Last Name' note the exact spelling.
I also wanted the email address which was in a column called 'Primary Email'.
To make it easier for me, I copied the Primary Email column and inserted it into the third column position and then changed the column header name from 'Primary Email' to 'Email'. (This meant I still had the original column header just in case). see image below.
But you could just change the column header name from 'Primary Email' to 'Email' without moving column about - up to you.
At this point check that all the contacts do have a valid email address.
then save the file.
If you do not want to edit the .csv file, then you need to edit the template email.
eg: {{First Name}} {{Last Name}} <{{Email}}>
change to : {{First Name}} {{Last Name}} <{{Primary Email}}>
If still having an issue, please post two images.
One image needs to show the row of column headers used in .csv file.
The other image needs to show the Template email, so I can see how you have used the curly brackets.

How do I sort by employee last name when grouped by employee id?

Hi,
The first Group is: Employee ID.
The second Group is: Employee Last Name.
I wish to sort the entire report by Employee Last Name; however, standard crystal reports sorting functionality doesn't present me with this ability. As a result, the report is sorted by Employee ID.
Can someone help me how to sort by Employee Last Name in this scenario?
thx,
Mark

Hi Mark,
When you create a Group in the report, Crystal reports automatically adds the grouped fields in the Sort list which unfortunately cannot be removed! You cannot change the priority of the sort fields too, and the only way of achieving this is by actually changing the group order. But it wouldn't help the purpose.
As a workaround, here's what you can do though:
1) Create a command object and provide a pre-sorted result set to Crystal Reports. In this situation you would probably create a command object like :
select Emp_ID, Last_Name from Emp order by Last_Name asc
2) Create the 2 groups in the report again. Open the 'Group Expert', click on the first group and then click 'Options'
3) The Sort order for this group would be 'in ascending order' by default. Change it to 'in original order'
4) Repeat the above step for the next group
This is the only way I know of sorting a report on another field.
Let me know how this goes!
-Abhilash

How to configure internet domain name for P6 website using weblogic

After installing and configuring weblogic for P6 you get the following address https://servername:7002/console/login/LoginForm.jsp to access P6 website. Anyone know how to configure a purchase domain such as www.mydomain.com have it redirect to https://servername:7002/console/login/LoginForm.jsp Is this configured in weblogic server? If not, what is needed to redirect the purchased domain?

HI
You could have that domain resolving to/by some DNS servers and set up a load balancer / proxy to redirect every incoming request to that domain / site to your weblogic console.
however , what is it you are trying to do? It is very unsual of redirecting/ using Domain names to redirect to wls consoles.
could you explain your use case in detail please
Sri

How to Configure Displayed flds,Sort criteria,Grouping crit-Cap Planning

Hi All,
Please let me know
How to Configure Displayed flds,Sort criteria,Grouping crit under Capacity Planning (Profile for List Variant-Sub Profile)
I want to create new Displayed flds,Sort criteria,Grouping crit
Prabakaran K

dear,
use CY40

How can I include "sort name" column when burning a playlist to disc?

I noticed the "sort name" info is missing in the burnt disc. How can I preserve the info? I spent some times in correcting some sorting order in my library and I want that info to be in my backup too.

The sort fields should be getting stored in the files' tags, assuming they have tags. When buring an audio disc this information will be lost. It ought to be preserved when using the iTunes backup function, however you may be better off using a 3rd party backup tool to backup the entire iTunes folder.
N.b. You've posted in the Using iTunes for Windows forum but your sig says you're a Mac User, otherwise I'd recommned SyncToy 2.0 for your backup. I'm not familiar enough with Mac to suggest a suitable replacement.
tt2

I have prepared a personal budget and sorted the planned expenses by month, but the months are out of order. How do I correct?

I have prepared a personal budget and sorted the planned expenses by month, but they are out of order. How do I correct?

David,
You've got to give us something to go on here. At least post a screen shot so we can see how your data is arranged. I suspect that you may have named the months with text strings rather than as actual Date values, so when you sort they are in alphabetical order rather than date order.
Jerry

IBooks is using "Sort Name" and not "Name". How do I fix this?

I need help.
I have sorted through all my ebooks, changing them to epub, editing metadata to have correct title, author, and even series (title and order) using a program called Calibre.
When I sent these to my iTunes-iBooks it chooses to sort them by Sort Name (not the Name, but an entirely different field). I was able to mass delete Sort Artist, but not Sort Name. It is currently putting the series information in as Sort Name.
As you can reasonably understand, I want to KEEP the series information as part of the metadata, but not have iTunes sorted by this, as it makes it impossible to find books by the title or "Name" of the book.
Is there any way to force iTunes and iBooks to sort by Name only?
Is there a way to delete Sort Name information without losing Series information as a part of the data?
Additionally, I have close to 400 ebooks- I REALLY don't want to have to manually delete the Sort Name from each of these and honestly I'm afraid to lose the series data which took forever to input correctly.
Off-topic: Can we just mention how so much could be solved if iTunes didn't treat books as if they were tracks of a CD? It's an Author not an Artist, they could include handy fields for Series rather than putting it in Sort Name, etc. I love the compatability between all my devices, but iTunes really should beef up their love for readers.

Well the idea of the sort fields in general is that you use them to get fine grained control over the sort order rather than tweaking the main field to an incorrect value. iTunes has a built in mechanism for auto-sorting values that omits a leading article (a, an, or the) such that The Beatles will normally sort automatically under B. Given that mechanism exists there is usually no need to place anything in the sort field at all, but if it is there then manual edits to the main field won't change the sort order.
You should be able to clear the current values using my script ClearSortName. Test the behaviour on a small group first to make sure it does what you want. Rather than having empty values I use the Sort Name field to actively group and order series so, for example, my Jo Nesbø books are kept together, and in the correct order, but retain their original titles. And I use sort artist/album/composer(author) to place the authors in the correct order by surname.
tt2

I have an iphone and 2 itouches register under my apple account. I gave the itouches to my kids but when they send messages shows my name in all of them. how can I personalized their itouches so their names will show in IM?

I have an iphone and 2 itouches register under my apple account. I gave the itouches to my kids but when they send messages shows my name in all of them. how can I personalized their itouches so their names will show in IM?

Hi Kevin,
Thanks for taking your time with this. this is messages via app on ipod touch. How can I personalized their itouches? I am new with all this stuff.
Thanks

How to configure the iTunes,to display only folder name as Album.

How to configure the iTunes,to display only folder name as Album under Music.
I have a folder with name "English" under this I have plenty of folders which are either movie names or custom names created by me,inside of these are the music files. I just want all the files to be copied to the iPod with out any album artwork(which the itunes display under "Album By Artist" contains).The "Album By Artist" doesnt seem to contain just the folder name,it gets something else like the website from where the music file downloaded. This makes me irritating to browse through iPod or iTunes.
Please help me in configuring,so that I can just see the same folder/music hierarchy I see in my windows machine in the iPod.

Yep, I agree with Jurjen. It is not only limited to ACTVT, but rather fields of other objects as well which are "action" or "activity" related.
I would start the other way around - give them '03' only and investigate any transaction specific claims that it is not enough. There will be a few...
Cheers,
Julius

I using new ipad 32gb and i cant get user name and password how i configure it ? please give me solution

im using new ipad 32gb and i cant get user name and password how i configure it ? please give me solution

What do you mean 'can't get user name and password' ? What are you trying to do with your iPad and what happens when you do it ?

How to configure Personal WS to sort names by last name?

Similar Messages

Maybe you are looking for